Database Info

[CWM][ROOT] Evolve FX420/FX520

ClockworkMod Recovery + ROOT
Evolve FX420/FX520​
Hello everyone! Here I brought you custom recoverys and root for phones Evolve FX420 and FX520.
So here are instructions for flasing recovery and gaining root privilegies:
DOWNLOAD LINKS:
http://uploadmirrors.com/download/0HJXJMTP/SP_Flash_Tool.rar
and
http://uploadmirrors.com/download/1NBMV101/_Drivers.rar
- Download SP_Flash_Tool, Drivers and cwm.img recovery image and extract them
- Add Superuser-3.2-RC3-arm-signed.zip file on your SD card
- Shut off phone and take out baterry
- Hold volume up button and plug in USB cable (battery must be still out of the phone)
- Windows recognize new hardware, but Windows won't find any so navigate into _Drivers folder
- If drivers are installed correctly, you can disconnect USB cable
- Launch /SP_Flash_Tool/Flash_Tool.exe and click on "Scatter-loading" and choose file "MT6577_Android_scatter_emmc.txt" which is in the same folder as Flash_Tool.exe
- Click on RECOVERY and choose "cwm.img"
- Now click on "Download" button on top
- Hold volume up button and plug in USB cable (battery must be still out of the phone)
- Flashing process should be started. After it's done, you'll see green cicle which means everything is OK
- Insert battery inside phone
- Turn on phone and hold volume up at the same time
- Your new "cwm" recovery pop up! Install Superuser-3.2-RC3-arm-signed.zip" and reboot system after it.
- Phone will boot with root privilegies!!!
Click to expand...
Click to collapse
There is SP_Flash_Tool tutorial with pictures. Do NOT use their values or anything, you can just look at flashing process looks like: http://forum.xda-developers.com/showthread.php?t=1982587

[Q] [q] bricked lg optimus 3d!?

Hi,
I recently bricked my LG Optimus 3D and am trying to install the software again. I am using the steps:
1.Download and Extract “LG Flash Pack”, you will get “LG Flash Tool 1.2″, “OMAP drivers” and “LGUnitedMobileDriver”
2.Install the LGUnitedMobileDriver from the pack
3. Install Flashtool 1.2 and apply crack
4. Install TI OMAP 4430 driver:
-Remove the SD card and SIM from your phone
-Remove the battery from your phone
-Open the device manager and plug the phone to your PC
-In the device manager, you will see TI OMAP 4430 appearing and disappearing
-Double click on it when it appears and click update driver
-The select Scan my computer for drivers
-Then click on “Let me slect from the device driver list”
-Click next, and now click on “Have disk”
-Show the driver from the Flash Pack you just have downloaded
-Install the unsigned driver and you are good to go
5. Run start_fastboot from the omap4boot-for_optimus-v1.11 folder and choose option 2, enter
6. Remove the battery from the phone and start pressing the Vol+ button.
7. Now connect the phone to PC, Omap4boot will flash some files and will wait for 5 seconds for you to plug the battery back.
8. Immediately plug the battery back (better have the phone turned upside down and the battery in the back but not loaded into slot so that you can load it into the slot quickly)
9. Phone will boot into GREEN SOFTWARE DOWNLOAD mode
10. Go to device manager and change the port “LGE CDMA USB SERIAL PORT” to “com41″.
11.Run LGFlashTool.
12.In DLL select file “LGP920_110622.dll”
13. In S/W select only *.bin file that you have downloaded
14. Choice (Check) “USB” and click OK.
15. Click on Port COM settings(COM plug icon)
16.Check as on photos.
17. Click start(The Port 1 window should appear READY).
18. Disconnects USB cable and wait 5 seconds.
19. Press and hold voll up button in LG Optimus 3D and connect USB cable.
20. The update process will begin automatically after that release the “vol up”.
21.When the progress bar reaches 100%, Power ON the LG Optimus 3D.
However, I'm stuck on step 21. When the progress bar reaches 100%, Power ON the LG Optimus 3D. My phone automatically turns of when I'm around 34% and the flash tool says 'download fail' because my phone turned off.
How do I fix this PLEASE?
Thanks.

mnc221 said:
Hi,
I recently bricked my LG Optimus 3D and am trying to install the software again. I am using the steps:
1.Download and Extract “LG Flash Pack”, you will get “LG Flash Tool 1.2″, “OMAP drivers” and “LGUnitedMobileDriver”
2.Install the LGUnitedMobileDriver from the pack
3. Install Flashtool 1.2 and apply crack
4. Install TI OMAP 4430 driver:
-Remove the SD card and SIM from your phone
-Remove the battery from your phone
-Open the device manager and plug the phone to your PC
-In the device manager, you will see TI OMAP 4430 appearing and disappearing
-Double click on it when it appears and click update driver
-The select Scan my computer for drivers
-Then click on “Let me slect from the device driver list”
-Click next, and now click on “Have disk”
-Show the driver from the Flash Pack you just have downloaded
-Install the unsigned driver and you are good to go
5. Run start_fastboot from the omap4boot-for_optimus-v1.11 folder and choose option 2, enter
6. Remove the battery from the phone and start pressing the Vol+ button.
7. Now connect the phone to PC, Omap4boot will flash some files and will wait for 5 seconds for you to plug the battery back.
8. Immediately plug the battery back (better have the phone turned upside down and the battery in the back but not loaded into slot so that you can load it into the slot quickly)
9. Phone will boot into GREEN SOFTWARE DOWNLOAD mode
10. Go to device manager and change the port “LGE CDMA USB SERIAL PORT” to “com41″.
11.Run LGFlashTool.
12.In DLL select file “LGP920_110622.dll”
13. In S/W select only *.bin file that you have downloaded
14. Choice (Check) “USB” and click OK.
15. Click on Port COM settings(COM plug icon)
16.Check as on photos.
17. Click start(The Port 1 window should appear READY).
18. Disconnects USB cable and wait 5 seconds.
19. Press and hold voll up button in LG Optimus 3D and connect USB cable.
20. The update process will begin automatically after that release the “vol up”.
21.When the progress bar reaches 100%, Power ON the LG Optimus 3D.
However, I'm stuck on step 21. When the progress bar reaches 100%, Power ON the LG Optimus 3D. My phone automatically turns of when I'm around 34% and the flash tool says 'download fail' because my phone turned off.
How do I fix this PLEASE?
Thanks.
Click to expand...
Click to collapse
What are u trying to flash? Gb or ICS?
Did you tried to flash the baseband also?
U can flash both at the same time.
@80% ca you should have "target reset" then your phone go off.
Flashtool should give you an error but your phone should be ok.
Battery is charged?

LG Flash Tool does not work because phone turns off during download
Hi Experts,
I have the same problem. Following the steps described above the phone which is in "green S/W" download or "emergency download mode (initiated by the flashboot.bat) always turns off after some 2-3min during the flashing process with the LG Flash Tool. This 2-3 minutes are only sufficient to go up to 27-28% for me. then download fails. I am pretty sure my battery has power! How can one prevent the phone in "emergency download mode" to go off after 3 min????
I would not be able to tell you any details on which parts I want to flash. I am just following the procedure described above because my phone is totaly bricked and I need a complete restore with everything which needs restoring...
Thanks for any help on this one.
Cheers,
S

sauronsauron said:
Hi Experts,
I have the same problem. Following the steps described above the phone which is in "green S/W" download or "emergency download mode (initiated by the flashboot.bat) always turns off after some 2-3min during the flashing process with the LG Flash Tool. This 2-3 minutes are only sufficient to go up to 27-28% for me. then download fails. I am pretty sure my battery has power! How can one prevent the phone in "emergency download mode" to go off after 3 min????
I would not be able to tell you any details on which parts I want to flash. I am just following the procedure described above because my phone is totaly bricked and I need a complete restore with everything which needs restoring...
Thanks for any help on this one.
Cheers,
S
Click to expand...
Click to collapse
Had the same problem.
Try this Link: http://forum.xda-developers.com/showthread.php?t=2360358[/URL]

mnc221 said:
Hi,
I recently bricked my LG Optimus 3D and am trying to install the software again. I am using the steps:
1.Download and Extract “LG Flash Pack”, you will get “LG Flash Tool 1.2″, “OMAP drivers” and “LGUnitedMobileDriver”
2.Install the LGUnitedMobileDriver from the pack
3. Install Flashtool 1.2 and apply crack
4. Install TI OMAP 4430 driver:
-Remove the SD card and SIM from your phone
-Remove the battery from your phone
-Open the device manager and plug the phone to your PC
-In the device manager, you will see TI OMAP 4430 appearing and disappearing
-Double click on it when it appears and click update driver
-The select Scan my computer for drivers
-Then click on “Let me slect from the device driver list”
-Click next, and now click on “Have disk”
-Show the driver from the Flash Pack you just have downloaded
-Install the unsigned driver and you are good to go
5. Run start_fastboot from the omap4boot-for_optimus-v1.11 folder and choose option 2, enter
6. Remove the battery from the phone and start pressing the Vol+ button.
7. Now connect the phone to PC, Omap4boot will flash some files and will wait for 5 seconds for you to plug the battery back.
8. Immediately plug the battery back (better have the phone turned upside down and the battery in the back but not loaded into slot so that you can load it into the slot quickly)
9. Phone will boot into GREEN SOFTWARE DOWNLOAD mode
10. Go to device manager and change the port “LGE CDMA USB SERIAL PORT” to “com41″.
11.Run LGFlashTool.
12.In DLL select file “LGP920_110622.dll”
13. In S/W select only *.bin file that you have downloaded
14. Choice (Check) “USB” and click OK.
15. Click on Port COM settings(COM plug icon)
16.Check as on photos.
17. Click start(The Port 1 window should appear READY).
18. Disconnects USB cable and wait 5 seconds.
19. Press and hold voll up button in LG Optimus 3D and connect USB cable.
20. The update process will begin automatically after that release the “vol up”.
21.When the progress bar reaches 100%, Power ON the LG Optimus 3D.
However, I'm stuck on step 21. When the progress bar reaches 100%, Power ON the LG Optimus 3D. My phone automatically turns of when I'm around 34% and the flash tool says 'download fail' because my phone turned off.
How do I fix this PLEASE?
Thanks.
Click to expand...
Click to collapse
flash fastboot by Follow this method http://forum.xda-developers.com/showthread.php?p=44532338&nocache=1
flash fastboot and Replace the original boot and download mode download the following file http://www.mediafire.com/download/b...for_optimus-v1.22+modified+by+XcachorroX®.rar
and Follow step
flash fastboot and Replace the original boot and download mode Until the fastboot is the basic boot for device.
Connect phone without battery,phone detect OMAP4430 {device manager}
Install driver omap "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) by select update driver then select browse my computer for driver {install driver Manual}
After driver installation ends remove usb cable
Run start_fastboot.bat and select option 2
Pull out battery
Hold Vol+
Connect USB cable, the usbboot will start
Insert battery while the usbboot is waiting
and follow the instructions,after this you see logo LG Gray in phone He asks you entered fastboot Answer no and accept to flash and Replace the x-loader / u-boot source
If the LG COSMO appears in device manager install driver for her by select update driver then select browse my computer for driver {install driver Manual} and select Install driver from "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) then try again step 2 flash fastboot

[Official Marshmallow] Lenovo Vibe X3 (Only For X3a40) [Stock Frimware] [Flashing]

This Guide Tells You How To Update Your Lenovo Vibe X3 (X3a40 Variant) To The Latest Marshmallow Firmware​​
Warning
If This Bricks Your Phone I Am Not Responsible Although It Is Very Safe But If You Do Anything Stupid It May Brick The Phone If This Happens Repeat All The Steps Again Without Messing Up It Should Fix The Phone​
List Of Things Required For Updating Your Device​Drivers + QFIL - https://drive.google.com/folderview?id=0B5QzQ51ejd3rLWREYmNjWjNwV1U&usp=sharing
Lenovo Vibe X3 Marshmallow Firmware - https://drive.google.com/file/d/0B6fGoFSBPp8QcWtaUlcwVTMxMHc/view?usp=sharing​​
Lets Begin
Flashing Guide​
WARNING: Everything apart from data in external SD card will be wiped. Make sure to backup everything.
1.Download the QFIL flash package ZIP and appropriate ZIP from Drivers+QFIL.
2.Extract the ZIPs to a folder whose complete path has no spaces (space characters) at all.
3.Make sure you uninstall any other phone's PC Suite/drivers as they may cause conflicts. Microsoft Emergency Driver (installed for restoring Lumia devices) is known to conflict, please uninstall it.
4.Go to Drivers+QFIL folder extracted in Step 2, run the appropriate 'INSTALL_DRIVERS_&_QFIL.bat' and follow the instructions.
5.Backup contacts, SMS, apps, etc. as well as the entire internal storage as they will all be wiped(you will setup a new phone). Internal storage WILL BE erased when using the QFIL flash method.
6.Run 'QFIL' program. (If Unable To Find It Search It In Start Menu You Will Find It There)
7.Select 'Flat Build' as build type.
8.Click on 'Browse', select the 'prog_emmc_firehose_8992.mbn' file from the 'X3a40_S217_160623_ROW_QFIL' folder which you extracted.
9.Click on 'Load XML' and select 'rawprogram0.xml' followed by 'patch0.xml'.
10.Make sure you completed each step precisely, the USB cable is connected ONLY to USB port (USB 2.0 preferably) of PC and not to device yet, the device is powered off and is charged (at least 40%).
11.Now boot into EDL by plugging in the USB cable to device and quickly pressing and holding power button for ~1 second. QFIL's 'No port available' text should change to 'Qualcomm HS-USB QDLoader 9008 (COMXX)'. The display will stay off so, don't worry about it.
12.Within ~5 seconds put the device on a stable surface (so that it doesn't move around or shake) and press the 'Download' button on QFIL. If you are late, the device starts to power on normally and you need to go back to Step 11 and continue.
13.Wait for the flash to complete and 'Download Succeeded' message appear at the bottom.
14.Unplug the USB cable from the device and press and hold the power button for ~10 seconds to power it off.
15.Now power on the device normally. If display doesn't turn on press and hold the power button again for longer time, it will boot.
16.Once you have finished the initial set up, open dialer, dial '####682#', choose your region (IN - For India) and confirm. [Don't Skip This Step Its Important]
NOTE - IF Having Trouble In Installing The Drivers Or Detecting The Phone In QFIL Google On How To Disable Signature Enforcement In Windows 8 or 8.1 or 10 And After Doing That Again Install The Drivers.
HIT Thanks Button If I Helped You It Will Keep Me Motivated In Helping Others
TIPS & INFORMATION​The various modes X3a40 can boot into:
Recovery mode: Press and hold Volume up + Volume down + Power together until Lenovo logo shows up and flickers once. Release the buttons and you will reach the recovery. This opens up the recovery of the device.
Qualcomm Diagnostics mode: Press and hold Volume down + Power button together until Lenovo logo shows up and flickers once to boot into this mode. This opens up the Qualcomm Diagnostics screen which has a number of hardware testing and other tools along with ability to flash the stock ROM. It is also used for further Diagnosis using a PC.
Fastboot mode: Press and hold Volume up + Volume down and plug in the USB cable(already connected to PC). You may also use the ADB command "adb reboot bootloader". Obviously you need a working device with USB Debugging turned on and ADB installed on PC. This opens the traditional Fastboot interface.
EDL mode: Plug the USB cable and quickly press and hold the power button for a little while. Device stays in EDL only for ~5 seconds unless you start firmware flash via QFIL. You can also use ADB command "adb reboot edl". This will put your device in Qualcomm Emergency Download Mode which is meant to flash stock firmware using QFIL tool on working/bricked devices.
Normal mode: This is what you boot by normally pressing the power button. I don't need to say much about this one.
Keep your NV data (IMEI, Serial No., etc.) backed up from QFIL>Tools>QCN Backup Restore. Device must be in Qualcomm Diagnostics mode. There are many more ways to do this.
#Note- If Any Of The Link Goes Down Inform Me I'll Bring The Up As soon as Possible.

Will just flashing the SuperSU zip enable me to get root in Marshmallow rom?
Or should I do everything from this thread again to gain root? I already have root in my lollipop and want to update to Marshmallow only if I can get root in it.

This is stolen from this existing thread:
http://forum.xda-developers.com/android/development/rom-lenovo-vibe-x3-row-x3a40-stock-t3328461
Thread closed.

CloudPad C701TV+/ 701TV+ (+VT107C) Firmware (Dedoxed Edition with Xperia MOD) (Not Final)

Hello, it's @ruzukato02dev-desu! Here's the firmware dedoxed edition mod of CloudPad C701TV+ Tablet Firmware
CLOUDPAD C701TV+ WITH DEDOXED EDITION (SONY XPERIA MOD)
*Removed such as
Google Maps
Google+ (Now Currents)
Hangouts
Search Bar
Google Street view
*Boot animation from Sony Xperia
*Sony Xperia ringtones inserted with/ tap sounds effect
*just 200+mb lesser the system apps (dedoxed)
*added google launcher and google keyboard
Video:
Download Link: https://mega.nz/file/OHA3kQrR#ccYx4zMEFLiIPlPIb4b0G1fB_tFBTp4m06JKlRbF6Cc
Requirements (Only One):
SP Flash Tool
Miracle Tool
Note: it is custom rom and non-rooted, but no need to flash like custom recovery, use only miracle tool and SP flash tool
Do with your own risk, I am not responsible damage your device.
== For Miracle Tool (or miracle tool cracked): ==
1.) Open your application
2.) Go to MTK > Service > Write
3.) Select 8TH Boot on the MTK Chipest on your tablet
4.) Click the file icon, select the scatter file (that you extracted)
5.) Press start
6.) On your tablet, press volume down and plug USB together
7.) When detected, flash all on your system firmware on popup
8.) Wait until finish, and done!
Note: If the tablet stuck on boot in 3 minutes, restart using hold power and volume down key, then turn on again.
Enjoy!
== For SP Flash tool users ==
For SP Flash tool users,
Before flashing the custom rom, please don't format the whole system on your tablet, it will erases the wi-fi mac address (nvram) and IMEI #
Please do only "download mode"
1.) Open the application
2.) Click the "scatter-loading file", select the scatter file (that you extracted)
3.) Flash all the firmware
4.) Press download icon
5.) On your tablet, press volume down and plug USB together
6.) Wait until finish, and done!
Note: If the tablet stuck on boot in 3 minutes, restart using hold power and volume down key, then turn on again.
Enjoy!
That's all
Please subscribe YT Channels:
https://www.youtube.com/channel/UCyA7PJWqz_z9dzK7-mmGA2w
https://www.youtube.com/channel/UCGSJr_Xo0mDVg7iBwZNNZeQ

Good day sir, i cant proceed to download mode. my cable is working even detected as a usb device on my pc , but i cannot flash this device after pressing the down button. what should i do?

Hard Brick fix Tecno & Infinix Phone Flashing guide

TECNO & INFINIX FLASHING GUIDE
Tested phone list (Main page)
1.Tecno KD7
2. Infinix hot 9 play:
X680
X680B
X680F
3. Infinix Hot 9
X655C
4.Tecno KE7
5. Other Phone Work
*** Flash to fixt:****
Auto Restart On Off
Hanging While Device Running
Pin Lock
Pattern Lock
Face Look
Privacy Lock
Start Android Password
Auto Fastboot Mode
Auto Recovery Mode Unfortunately Android Has Stopped Virus Problem
Storage Space Running Out
Sp Tool Error S Not Enough Storage Space
White/Black LCD After Flash Other Firmware
Invalid IMEI Baseband Unknown
Dead After Flash Etc
# # Formate and Download erxta imei fixt tool ##
Tested phone : TECNO & INFINIX
** Driver & Flash tool download **
1. Download Driver:ChimeraInstaller.zip
File info :
a to z driver
2. Download Flash Tool:
Mtk bypass & flashing tool zip
File info :
1. Mtk Bypass tool
2.SP_Flash_Tool_v5.1924_Win
3.ModemMETA_v10.1816.0.01 (IMEI FIXt)
3. Your phone flash file Download: Main page
## Flashing possess
## driver install guid
Fast ChimeraInstaller tool install and open custom install -1, 2 & 6 no. driver install
pc antivirus off
Mtk bypass & flashing tool zip download & unzip
unzip folder open
mtk bypass tool folder open & libusb-win32-devel-filter-1.2.6.0 install . launch & open. install driver a filter open. after phone power off . after Volum up + Volume down + power button hold click then USB cable connected. top up mtk driver show . click and install
## flashing process :
Antivirus OFF
Mtk bypass too open & bypass button click.
Volum up + Volume down + power button hold click then USB cable connected.
Not unplug USB cable
So tool open & sClick on Scatter-loading by the right
[[ Mtk bypass tool to phone connected:
1. Volume up button hold click then USB cable connected.
2.Volume up + down button hold click then USB cable connected.
3.Volum up + Volume down + power button hold click then USB cable connected. ]]
4.Flashing guide:
Mtk bypass tool +sptool tutorial video
5.Flashing guide
Full format + IMEI fix video tutorial