Database Info

Rooting and CWMR for Qmobile Noir A7

Earlier we posted the screenshots, claiming to finally have nailed Qmobile Noir A7. Here is the most requested post for the step by step method of rooting, All you are required to do is follow the steps.
Installing CWMR
1. Download the Files
i. Scatter and CWMR for A7(Download Here)
ii. SPFlashTool ( Download Here )
iii. Drivers for A7 – CD or from the Q site.
iv. root_a7.zip( Download Here )
2. With phone on, connect the phone to the computer and start USB Debugging.
3. Install the Drivers to it through driver file.
4. Now Switch the phone off and connect the phone to the computer again. It’ll ask you to install the another driver. Install it from the preloaders downloaded.
5. Put the file in Scatter per Image Below.
6. Ensure nothing but the recovery check box is clicked. Rest remain unchecked.
7. Switch off your Phone. Take the Battery out for 5 Secs and reinsert the Battery.
8. On Flashtool press download.
9. Connect your phone cable connecting it to the computer. No hurries take your time. (Ensure when download was clicked your phone was not connected to the phone)
10. Upon successful flashing you will see the green circle icon.
11. Close the tool and restart your phone in recovery mode by holding power + Volume up
12. You should be able to enter CWMR.
Rooting Phone
Download Root_A7.zip file
Copy to SD card.
Power off your phone.
Turn on by pressing power button + volume up button.
Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “Root_A7.zip” –> Select Yes
When done Successfully Go Back main CWMR And Reboot your phone.
Check your applications section you’d have superuser there.
Open Superuser app and in settings update your binaries.(Congratulations you are rooted).
PS : INCPak never lied to anyone, doubt ever us we just ensure that this procedure is verified and doesn’t mess your phone !
- See more at: http://www.incpak.com/tech/lets-root-qmobile-noir-a7/#sthash.Vds1TVe2.dpuf
CREDITS:UBAID KHAN AND KHURRAM

Karbonn A51 Pattern Unlock / Flash Process

After too many google on the net i finally success to unlock Pattern of my Karbonn A51.
Requirement Download Here :
SPD Driver:
http://www.4shared.com/rar/fhrCvLQH/spd_sci-android-usb-driver-jun.html?cau2=403tNull&ua=WINDOWS
Flasher :
http://www.mediafire.com/download/ba3gmetsv9b6sl1/Spd+Factory+flasher.rar
or search for ReserchDownload/upgradedownload/spdflash factory tool (best V. 2.9.7002)
Firmware: (Soft Ver. 1.10)
https://hotfile.com/list/2276623/ee2d399
Process:
1. install all required driver into PC.
2. open SPD tool
3. open and select flash file (.PAC)
4. switch off mobile / remove battery / insert battery.
5. click start button (play button in tool)
6. press and hold vol+ button and insert USB while holding vol+
Process started..
just calm and sit back untill a green Passed message not appear into tool.
now remove USB, remove and reinsert battery and start.
its done....:good:

links not working

this method only works if you have USB debugging enabled on your phone, right?

Utime G7 (Official) Rom with hardware keys (no on screen home, back, option keys)

Warning the Default Language is Hungarian but you can easily change it in settings!
How to Install Rom
-Download the files to be flashed
-Find and download SP Flash Tool for windows! (Sorry Linux users! . Apple product users don't use this, its only for non-apple people) (Warning the phone does not connect with windows running on virtual box)
- Install SP Flash Tool.
-Open SP Flash Tool.
Click scatter (or something similar) button to the top right.
- Select the file MT6589_Android_scatter_emmc.txt in ROM folder your downloaded.
- Wait for all the .img to load into Flash tools
- Turn off your phone, remove the battery.
- Press the Download button on the SP Flash Tool window.
- And then plug in the usb cable to phone (and obviously the other end to the computers usb port) and see if the computer detects your phone if it doesn't then insert battery and it should.
- The process will start and a red progress bar on the botton of SP Flash Tool window will appear then a different colour progress bar.
- If the flash is successful then green circles display on SP Flash Tool
- Done !
- You can now disconnect your phone and turn it on.

[30.08.2014][ROM] JXD S7800B 8GB - CyanogenMod 11 Kitkat (With Power/Sleep fix)

Thought I would give people a heads up in case some wasn't aware about the beta of a ported CM11 rom. Seems great so far
ROM Download:
http://www.arctablet.com/blog/forum/crewrktablets-rk3188-entwicklung-customroms-development-croms/jxd-s7800b-gamepad-8gb-kitkat-cyanogenmod-11-rom/
Rom Installation:
1. Download Rockchip Batch Tool 1.7: http://www.cloudstor.es/file/m1_OTM0OA/
2. Connect your S7800B to your computer via USB 2.0 (avoid USB 3.0 ports).
3. Power up your device and run the file RKBatchTool.exe (requires administrator) on your computer.
4. You'll note the tool shows a pink color indicating the status (device is connected).
5. Click the "Switch" button and your device will reboot. Install drivers via Device Manager.
6. Press the "Reset" button your device, wait for it to boot up.
7. Again, click the "Switch" button, this time the area above will turn green - programming mode ready (if it doesn't you didn't install the driver).
8. Select the desired flash image file (.img) and press "Restore".
Power Button/Sleep Fix (RK3188-T users):
For those people who have the power button/sleep bug in most custom roms (RK3188-T users) you will also need to flash the extracted kernel.img from Webclaws 2G/SPECIAL rom.
Kernel.img/Flash tool:
http://boards.dingoonity.org/jxd-devices/%28kernel-only%29-powersleep-fix-for-jxd-s7800-%28rk3188-t%29/

DooGee DG800 KitKat NeXt

ROM download link
Recovery for DG800
What inside :
- Launcher : Trebuchet 1.0 from CyanogenMod 11
- Improved Calculator
- Google Camera from LG G2 (Support 13Mpx rear and 8Mpx front camera, working recording video with flash)
- Root with SuperUser by Chainfire
- Stock Google Calendar
- Honami Xperia Keyboard Multilanguage (Default Stock Google Keyboard)
- Fully Multilanguage (if you want more languages tell me and i add your language to rom)
for this time thats all, but still working on this rom.
—————————————————————————–
How to Install ROM
1. Go to Recovery
2. Make WIPE DATA/FACTORY RESET
3. Choose Update From SDcard
4. Choose ZIP File
5. Wait for finish
6. Press GO BACK and choose REBOOT PHONE
7. First boot take some time, be patient
—————————————————————————–
Ho to Install Recovery
1. Unpack DG800_Recovery.rar
2. Turn off phone and remove battery
3. Run Flash_tool.exe as ADMINISTRATOR from SP_Flash_Tool_v3.1328.0.183 folder
4. Choose scatter file from ctr_recovery folder
5. Put battery into phone
6. Press F9 or click DOWNLOAD BUTTON in SP Flash Tool
7. Connect phone into PC and wait for finish (you see green circle)
8. Then unlpug phone and remove battery and put into phone again
9. If you want go to recovery Turn off phone
10. Press VOL+ and POWER and wait
11. From menu choose RECOVERY (VOL+ choose, VOL- accept)