ROM download link
Recovery for DG800
What inside :
- Launcher : Trebuchet 1.0 from CyanogenMod 11
- Improved Calculator
- Google Camera from LG G2 (Support 13Mpx rear and 8Mpx front camera, working recording video with flash)
- Root with SuperUser by Chainfire
- Stock Google Calendar
- Honami Xperia Keyboard Multilanguage (Default Stock Google Keyboard)
- Fully Multilanguage (if you want more languages tell me and i add your language to rom)
for this time thats all, but still working on this rom.
—————————————————————————–
How to Install ROM
1. Go to Recovery
2. Make WIPE DATA/FACTORY RESET
3. Choose Update From SDcard
4. Choose ZIP File
5. Wait for finish
6. Press GO BACK and choose REBOOT PHONE
7. First boot take some time, be patient
—————————————————————————–
Ho to Install Recovery
1. Unpack DG800_Recovery.rar
2. Turn off phone and remove battery
3. Run Flash_tool.exe as ADMINISTRATOR from SP_Flash_Tool_v3.1328.0.183 folder
4. Choose scatter file from ctr_recovery folder
5. Put battery into phone
6. Press F9 or click DOWNLOAD BUTTON in SP Flash Tool
7. Connect phone into PC and wait for finish (you see green circle)
8. Then unlpug phone and remove battery and put into phone again
9. If you want go to recovery Turn off phone
10. Press VOL+ and POWER and wait
11. From menu choose RECOVERY (VOL+ choose, VOL- accept)
Related
can cm9 be flashed with stock kernel on x8 without bricking the phone.
ICS
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
muftiazan said:
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
Click to expand...
Click to collapse
i don't think that rom is for stock kenel .
i am myself said:
i don't think that rom is for stock kenel .
Click to expand...
Click to collapse
can u please tell any rom which uses stock kernel
thanks
muftiazan said:
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
Click to expand...
Click to collapse
thanks bosss
CWM backup ROM
Hi all,
I have rooted my Lenovo ThinkPad tablet and installed CWM by instructions in there http://forum.xda-developers.com/showthread.php?t=1831161 ...I wanted to flash to Cyanogenmod10, but before it I wanted to backup original ROM. And my problem is - there is no "Backup & restore" option in CWM's boot menu...where could be a mistake?
next from angeek too !!! this rom we need to thx莫少俊熙灬 <----also chinse name :good: (nice guy)
this rom can flash it in hktw and china 4.1 both =) att user cant flash =(
The system features:
1. use aroma flash method !!
2. battery 1%mod and jelly bean status bar and apple style word...
3. odexed , zipaligned and fast gps locked
4. volume unclock and host ( dial *#*#6686#*#*)
5.repair offical jb4.1.2 bug ( repair camera , gallery ,gps , alarm, wifi )
6. new build.prop ...(from PIM-MY-ROM creator :androguide.fr)
7. add 3d gallery ( first time to in this api will little bit slow)
8.add sony bravia engine...
9.use apex launcher
10. in boot Zipaligned optimization
11. add G turbocharger ( increase 3g speed , wifi)
12. IO optimization ...increase open apk speed
13. add new v6 super charger -U9-RC12-T6 (will more power save ) (from xda - zeppelinrox)
14. improve photo quality ( from xda -pimp-my-rom -------Androguide.fr)
15. use boost v3 ....stable ram using ...
16. LED light control and cpu control ...etc ... find it in system setting!!!!!!!!!!!!!!
17.tune the lowest screnn light ~!
18. in aroma flast mode ...u can choose many patch or simplify .......as u like( i dont know is it chinese or english in this aroma mode==)
19.. still have a lot....u find it urself!!
image:
http://attachment.angeeks.com/forum/201302/14/222838s65hn4xsdludipi2.jpg
http://attachment.angeeks.com/forum/201302/14/222838s65hn4xsdludipi2.jpg
http://attachment.angeeks.com/forum/201302/14/222836qmcpbczovm49hc7p.jpg
http://attachment.angeeks.com/forum/201302/14/22283390400mq9dyuud9ck.jpg
Download link :http://pan.baidu.com/share/link?shareid=261038&uk=4046361900
google sever pack :http://pan.baidu.com/share/link?shareid=167901&uk=2600960059
remember use the new boot menu to flash this rom =)
flash in zip~!!!!!!!!!:good:
flash instruction:
1. download the rom , u will saw Angeeks_MotoME865_4.12_6902_UISS_CN_Q2.zip and put it in SD card!
2.go to recovery
3.choose wipe & clean and wipe data & cache(factory reset) -YES-
4.choose wipe & clean enter in and wipe cache enter in - yes -
5. choose wipe & clean enter in and choose wipe dalvil cache enter in - yes-
6.choose wipe & clean enter in , wipe battery stats enter in - yes-
7.after wipe ...then choose install zip package and enter
8.then install a zip package and enter
9.scroll down to Angeeks_MotoME865_4.12_6902_UISS_CN_Q2.zip and enter
10.scroll down to yes and enter
11,wait.......(u will see some UISS team photo)
12.show welcome and type 下一步(next step)
13.will show another flash mode and some agreement ....and see a box to tick... and press下一步(next step)
14.press 下一步(next step)
15.then will in auto delect date ,,after that press下一步(next step )
16. u will in aroma flash mode ....there are 3 type to let u chooose
1.是默认安装(install default) 2. 是精简安装 (simplify installation ) 3.( custom select ) (u can try if u know chinese )
17.after choose installation , press下一步(next step )
18.will enter the installation interface then press开始(start button) in right bottom conner
19.wait,,,unitl finish=)
20.after install press 下一步(next step)
21. finallly finish all installation...and press 完成(finish)
dont touch anything until it enter to the start boot!!
orignal post http://bbs.angeeks.com/forum.php?mo...lter=author&orderby=dateline&orderby=dateline
so far have you observed any bugs?
HI all,
I saw the need of reposting my post #282 (main ZOPO ZP999 thread) for people who want to root, flash recovery or for some reason lost control of their precious Zopo and want to regain it
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have noticed that the link sometimes is unavailable : Mod edit sales link removed
Therefore i post it here again : also THANKS TO JASPER===JG77 and Ghost45
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is what you have to do:
- Preferably use a Windows 7 (x32 or x64) system
- Download and install drivers http://www.4shared.com/rar/f0a9TeP8ba/Zopo_ZP999-3X_32-64bit.html
- Download the firmware and extract it (a stock ROM) http://www.zopomobileshop.com/content/9-download-zopo-mobile-latest-rom
- Download a recovery (I used CarlivTouch) http://www.4shared.com/file/xKa5nYyuce/recovery_CarlivTouch_30_ZP999.html
- Download SP Flashtool and extract http://www.4shared.com/zip/FlMUfELsba/SP_Flash_Tool_exe_Windows_v514.html
- Download SuperSu https://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
- Boot your phone and connect to your PC and copy the SuperSu zip to your SD (I used a micro SDcard and not phone storage)
- Disconnect and shutdown the phone
- Start SP Flashtool (as administrator)
- Click 'Scatter-Loading' and select the 'MT6595_Android_Scatter.txt' from the downloaded Firmware! Picture 1
- Remove all selections except (!) recovery
- Click on the location of the recovery
- Select the custom downloaded recovery file (in my case recovery_CarlivTouch_30_ZP999.img) Picture 2
- Remove the battery from your phone (DON'T CONNECT YET) (battery pull :not necessary i think...but does not harm )
- Make sure you see 'Download Only' in SP Flashtool and click the 'Download' button
- Now connect your phone to your computer and leave the battery out of it!
- Wait till you see a green sign Picture 3
- Disconnect your phone but the battery back in but (!) DON'T BOOT
- Connect the phone to a charger and wait till it shows the battery level
- Press the buttons Volume-Up and Power and hold them
- After the first Zopo screen release Power (I kept holding Volume-Up)
- If all is well you now see the custom recovery! (you can let go of the volume button ) (if it didn't work the first time because of wrong timing, just shut down again and retry)
- Immediately install the SuperSU ZIP file (install zip-> Choose zip from /storgage/sdcard1)
- When done choose reboot and if you get questions about fixing to keep the custom recovery and fix root, say YES
- Let it boot into Android and Check ROOT with f.e. rootchecker
- Go to Google Play Store and install Busybox (not necessary)
- Start Busybox and make sure you give it Root right (not necessary)
- Press Install, if it fails the first time do it a second time. You should see an OK message if all is well. (not necessary)
- Reboot your phone, and PRESTO, your phone is rooted.
If you would install MobileUncle Tools from Google Play Store you can see you are rooted. (Here you allways can go in recovery without any problems)
Thanksbutton appreciated
@raystef66,
New Zopo Official have taken new Forum of Zopomobileshop original first Zopo Forum.
So New threads are always here in Xda ...look for them.
THIS GUIDE IS ONLY FOR GALAXY S4 SGH-1337M
Guide made on 2017-03-12
I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU DO TO YOUR PHONE!
PERFORMING THIS WILL MAKE YOUR WARRANTY GO AWAY!
LEAVE A THANKS IF IT WORKS
This guide is split up into four parts meaning that if you just want to root your phone or just want to restore to stock then you can YOU CAN NOT INSTALL XPOSED WITHOUT ROOTING AND GETTING STOCK FIRST!
Welcome to my guide on how to install XPOSED on the Samsung Galaxy S4 (SGH-1337M) this guide is strictly for the SGH-1337M the reason I made this was because I spent a lot of hours trying to put parts of threads together since no one had specifically made a guide that was simple and noob friendly for installing XPOSED. Another reason is some people feel uncomfortable following guides made for the SGH-1337 mainly because it is different from the SGH-1337M. Another reason was I found no updated 2016/2017 guides for it. Follow every part step by step or you may risk losing your phone.
Also make sure you backup anything that isn't synced with Google that you want to keep, photos, music, contacts. This will delete all data on the phone.
This guide will be split up into four parts:
-Stock
-Root
-ROM that is needed
-Installing XPOSED
Requirements:
-A PC
-Internet
-Samsung Galaxy S4 SGH-1337M
-USB Cable
-SD Card with at least three free GB on it.
Stock Firmware
BEFORE YOU BEGIN (IMPORTANT)
1. Power off device
2. Boot into the stock recovery by holding Power Button+Home Button+Volume Up Button when you see the Galaxy S4 logo then let go of Power Button but keep holding Home and Volume Up
3. Wipe Data/Factory Reset
4. Wipe Cache Partition
5. Power Down
Now you may begin
1. Download the latest stock firmware from sammobile for your device from make sure it is for 5.0.1:
-https://www.sammobile.com/firmwares/database/SGH-I337M/
2. Extract the .zip after you finish downloading
3. Download ODIN v.3.12.3
-Attachment at bottom of thread.
4. Extract the .zip to get the ODIN program.
5. Turn your device off.
6. Boot into download mode by holding Power Button+Volume Down Button
7. When it gives warning press the Volume Up Button
8. Connect device to PC using USB cable.
9. Run ODIN as administrator
10. Your ODIN screen should look like this now:
-http://prntscr.com/ej6hrl
Note: Where it says [0:COM8] The 8 can be any number.
11. Click AP and find the .md5 file you extracted from the stock firmware .zip from earlier.
Note: It is normal for ODIN to freeze while checking the file don't panic and don't close out.
12. On the left hand side where it says options copy down these settings
-http://prntscr.com/ej6ivi
13. When you are done all that it should look like this:
-http://prntscr.com/ej6jmz
Note: My .md5 file or binary size won't look exactly like yours don't panic.
14. Click start
15. It will take a while just be patient and wait, mine took about 10-15 minutes yours might take longer. It should look like this when done and it should reboot automatically:
-http://prntscr.com/ej6nq9
Note: First boot may take a while be patient.
16. Quickly go through setup it doesn't matter what you choose because this isn't the final product.
17. As soon as you finish setup head over to Settings.
18.Go to "More" and click Security
19. Check Unknown Sources
20. Go back to "More"
21. Go to About Device
22. Tap the Build Number until it says developer options enabled.
23. Go back to "More"
24. Go to Developer options
25. Check USB Debugging
26. Turn phone off.
Rooting The Device
1. Download CF-Auto-Root.zip
-http://download.chainfire.eu/327/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip
2. Extract the .zip
3. Boot into Download Mode.
4. Connect Device to PC
5. Run ODIN as administrator
6. Your ODIN screen should look like this now:
-http://prntscr.com/ej6hrl
Note: Where it says [0:COM8] The 8 can be any number.
7. Click AP and click the CF-Auto-Root .md5 file that you downloaded
8. On the left hand side where it says options copy down these settings
-http://prntscr.com/ej6ivi
9. When you are done all that it should look like this:
-http://prntscr.com/ej779o
10. Click Start
11. It should look like this when done and it should reboot automatically:
-http://prntscr.com/ej77ok
Note: First boot may take a while be patient.
12. When it starts go to Play Store sign in and download Root Checker by joeykrim
13. Open the app and make sure the phone is rooted
Note: When you click "Check for root" it will ask for SuperUser permission you have 15 seconds to click grant otheriwse it will show wrong results.
14. If it isn't repeat this process again
15. Turn phone off.
Custom ROM that is needed.
General Information:
-Basically XPOSED requires a deodexed firmware and when I wanted to get it I didn't know how to deodex my firmware so instead I found a custom ROM which is very popular and extremely good that has a deodexed firmware.
We can do this two ways, but first we must do this.
1. Power off device
2. Boot into the stock recovery by holding Power Button+Home Button+Volume Up Button when you see the Galaxy S4 logo then let go of Power Button but keep holding Home and Volume Up
3. Wipe Data/Factory Reset
4. Wipe Cache Partition
5. Power Down
Method 1 Downloading ROM using PC then transferring to SD Card
1. Download the GoldenEye ROM from here
-https://www.androidfilehost.com/?fid=23991606952595353
2. Do not extract the .zip
3. Transfer .zip onto SD Card
4. Put SD card into phone
5. Boot phone and go through setup
6. Go to Google Play Store sign in and download ClockworkMod Rom Manager
7. Run the ROM Manager
8. Click Recovery Setup
9. Click ClockwordMod Recovery
10. Click your device.
11. Click "Flash ClockworkMod Recovery"
12. Give Superuser permissions
13. Reboot into Recovery from the ROM Manager
14. Wipe Data/Factory Reset
15. Wipe Cache Partition
16. Go to advanced
17. Wipe dalvik cache
18. Go back
19. install zip
20. Find the GoldenEye ROM from your SD card and install
21. It will start the Aroma installer click 1337M at device selection after you agree to terms.
22. Select GoldenEye Full
23. Go through the rest of the installer choosing your options that you prefer
24. It will take quite a while to install
Note: After it installs it will take a long time to boot do not panic for me it took around 15-20 minutes it might take longer for you.
Method 2 Downloading ROM using Device then transferring to SD Card
1. Boot Phone
2. Go through setup
3. Download the GoldenEye ROM from here using any browser from the Play Store
-https://www.androidfilehost.com/?fid=23991606952595353
4. Do not extract the .zip
5. Move .zip onto sd card using any file manager found on Play Store
6. Go to Google Play Store sign in and download ClockworkMod Rom Manager
7. Run the ROM Manager
8. Click Recovery Setup
9. Click ClockwordMod Recovery
10. Click your device.
11. Click "Flash ClockworkMod Recovery"
12. Give Superuser permissions
13. Reboot into Recovery from the ROM Manager
14. Wipe Data/Factory Reset
15. Wipe Cache Partition
16. Go to advanced
17. Wipe dalvik cache
18. Go back
19. install zip
20. Find the GoldenEye ROM from your SD card and install
21. It will start the Aroma installer click 1337M at device selection after you agree to terms.
22. Select GoldenEye Full
23. Go through the rest of the installer choosing your options that you prefer
24. It will take quite a while to install
Note: After it installs it will take a long time to boot do not panic for me it took around 15-20 minutes it might take longer for you.
Installing XPOSED
We can do this two ways, but first we must do this.
1. Power off device
2. Boot into the stock recovery or CWM recovery by holding Power Button+Home Button+Volume Up Button when you see the Galaxy S4 logo then let go of Power Button but keep holding Home and Volume Up
3. Wipe Data/Factory Reset
4. Wipe Cache Partition
5. Power Down
Method 1 Downloading XPOSED using PC then transferring to SD Card
1. Download the XPOSED Framework and .apk installer from here
XPOSED Framework
-https://www.dropbox.com/s/taywsnvw994uvha/xposed-v86.2-samsung-5.0.x-sdk21-by-dkcldark-arm.zip?dl=1
XPOSED Installer
-Attached at bottom of thread
2. Do not extract the .zip
3. Transfer .zip and .apk onto SD Card
4. Put SD card into phone
5. Boot phone and go through setup
6. Go to Google Play Store sign in and download ClockworkMod Rom Manager
7. Run the ROM Manager
8. Click Recovery Setup
9. Click ClockwordMod Recovery
10. Click your device.
11. Click "Flash ClockworkMod Recovery"
12. Give Superuser permissions
13. Reboot into Recovery from the ROM Manager
14. Wipe Data/Factory Reset
15. Wipe Cache Partition
16. Go to advanced
17. Wipe dalvik cache
18. Go back
19. install zip
20. Find the XPOSED Framwork from your SD card and install
21. It will start the installing
24. It will take quite a while to install
Note: After it installs it will take a long time to boot do not panic.
25. Go through setup process and then install the .apk from the SD card by clicking it using any file manager.
26. It will install
Final
We have finally finished installing XPOSED it was a long process but it was worth it.
Going to be doing some major updates to the steps stay tuned.
Hello, it's @ruzukato02dev-desu! Here's the firmware dedoxed edition mod of CloudPad C701TV+ Tablet Firmware
CLOUDPAD C701TV+ WITH DEDOXED EDITION (SONY XPERIA MOD)
*Removed such as
Google Maps
Google+ (Now Currents)
Hangouts
Search Bar
Google Street view
*Boot animation from Sony Xperia
*Sony Xperia ringtones inserted with/ tap sounds effect
*just 200+mb lesser the system apps (dedoxed)
*added google launcher and google keyboard
Video:
Download Link: https://mega.nz/file/OHA3kQrR#ccYx4zMEFLiIPlPIb4b0G1fB_tFBTp4m06JKlRbF6Cc
Requirements (Only One):
SP Flash Tool
Miracle Tool
Note: it is custom rom and non-rooted, but no need to flash like custom recovery, use only miracle tool and SP flash tool
Do with your own risk, I am not responsible damage your device.
== For Miracle Tool (or miracle tool cracked): ==
1.) Open your application
2.) Go to MTK > Service > Write
3.) Select 8TH Boot on the MTK Chipest on your tablet
4.) Click the file icon, select the scatter file (that you extracted)
5.) Press start
6.) On your tablet, press volume down and plug USB together
7.) When detected, flash all on your system firmware on popup
8.) Wait until finish, and done!
Note: If the tablet stuck on boot in 3 minutes, restart using hold power and volume down key, then turn on again.
Enjoy!
== For SP Flash tool users ==
For SP Flash tool users,
Before flashing the custom rom, please don't format the whole system on your tablet, it will erases the wi-fi mac address (nvram) and IMEI #
Please do only "download mode"
1.) Open the application
2.) Click the "scatter-loading file", select the scatter file (that you extracted)
3.) Flash all the firmware
4.) Press download icon
5.) On your tablet, press volume down and plug USB together
6.) Wait until finish, and done!
Note: If the tablet stuck on boot in 3 minutes, restart using hold power and volume down key, then turn on again.
Enjoy!
That's all
Please subscribe YT Channels:
https://www.youtube.com/channel/UCyA7PJWqz_z9dzK7-mmGA2w
https://www.youtube.com/channel/UCGSJr_Xo0mDVg7iBwZNNZeQ
Good day sir, i cant proceed to download mode. my cable is working even detected as a usb device on my pc , but i cannot flash this device after pressing the down button. what should i do?