Hello guys!
I want to have a liitle databases of helpful tips taht can be used for the AiKi.
Please add yours by repy, i'll edit this post
Boot in recovery
- Shut down the phone
- Press Power + Volume up
- Here you go!
(You can also do Power => reboot => Recovery ^^)
Unbrick The AiKi
Note : you will lose your data... the phone can't boot
What do you need:
THE WORKING RECOVERY
A Microsd 512 MB card at least
Howto :
Download the lastet version of AiKi Rom and put it at the root o the microsd card
Start in recovery
Go to Flash an update => Find the zip => [Select the aiki update]
Select your language, and go to AVANCED MODE
select your setting, but check WIPE SYSTEM
It will format the /system partition, useful if the phone can't boot
wait for restart, and enjoy!
i am not responsible if you damage your phone in any way.
This is your own desicion and if you make a mistake and blame me for it.
I will laugh at you and i will laugh hard. Enjoy
HERE ARE THE TWEAKS FOR THE ROM
60 fps
full cpu/gpu utilization
zipaligned all apks for better ram optimization
busybox added
inti.d support added
build.prop tweaks
net speed tweaks
faster gps lock
xposed framework added for dual panel mode
viper4android for amazing sound
xtheme engine added (similar to the theme engine found on cyanogenmod)
kernel tweaks
better deep sleep mode
faster internet
touch quality improved
scrolling speed improved
extremely smooth
no lag in UI
most unique ROM
Download ROM from HERE
CREDITS
VIPER4ANDROID-ZHUHANG
XPOSED FRAMEWORK-ROVO89
XTHEME ENGINE-mcsqwizzys98
BASE ROM-WINGOKU
Wingoku's website: http://wingoku.blogspot.com/
Reserved for patches
HOW TO FLASH ROM
1) Download Rom Zip File from the Link Above
2) Put into External/Internal SD Card
3) Go To CMW/TWRP/LEWA Recovery
4) Wipe Data/Factory Reset
5) Go to 'Mounts and Storage' and Format System
6) Select 'Install zip From Sdcard' and choose the Rom Zip File
7) Select Yes and The Installation will Start
8) Reboot Phone after Installation is Complete
9) Put Information & Complete Setup Wizard
10) Open 'Xposed Installer' from App Drawer
11) Select 'Install/Update' and close the App
12) Open 'Viper4AudioFX' from App Drawer
13) Follow Steps to Install Viper given BELOW
14) Go to Recovery Again
15) Fix Permissions and Wipe Dalvik Cache from Advanced Menu
16) Reboot the Phone
How to Use ViPER Audio Engine:
-Open 'ViPER4AndroidFX' from App Drawer
-Select "Yes" Option for Installing Drivers
-Choose CPU as 'Cortex A8 with NEON'
-The Driver's Will Install
-Reboot the Phone
-Open the Application Again
-Tick Mark the option of Enabling ViPER Engine
-Do Same for Headset & Bluetooth Mode
-Set other Sound Options
-Enjoy Amazing Audio Quality
HOW TO USE XTHEME ENGINE:
Just follow these steps carefully:
-Download the Apk and install it in your phone.
https://www.dropbox.com/s/3ciz2clswmxa6i7/XThemeEngine_beta5.apk
- After installing, open Xposed Installer app and from modules section...tick mark the theme engine app
- Reboot the Phone
- Install theme apk files...the ones you like... (links given below)
- Open the Theme Engine App
-Select the theme you installed
- Reboot and Enjoy
Thread from which you can get themes:
http://forum.xda-developers.com/showthread.php?t=2219999
reserved for screenshots
Screenshots coming soon
Waiting for screen shots.
My friend owns A8 and I'm sure that it will be good for him.
nathanjp said:
HOW TO FLASH ROM
1) Download Rom Zip File from the Link Above
2) Put into External/Internal SD Card
3) Go To CMW/TWRP/LEWA Recovery
4) Wipe Data/Factory Reset
5) Go to 'Mounts and Storage' and Format System
6) Select 'Install zip From Sdcard' and choose the Rom Zip File
7) Select Yes and The Installation will Start
8) Reboot Phone after Installation is Complete
9) Put Information & Complete Setup Wizard
10) Open 'Xposed Installer' from App Drawer
11) Select 'Install/Update' and close the App
12) Open 'Viper4AudioFX' from App Drawer
13) Follow Steps to Install Viper given BELOW
14) Go to Recovery Again
15) Fix Permissions and Wipe Dalvik Cache from Advanced Menu
16) Reboot the Phone
How to Use ViPER Audio Engine:
-Open 'ViPER4AndroidFX' from App Drawer
-Select "Yes" Option for Installing Drivers
-Choose CPU as 'Cortex A8 with NEON'
-The Driver's Will Install
-Reboot the Phone
-Open the Application Again
-Tick Mark the option of Enabling ViPER Engine
-Do Same for Headset & Bluetooth Mode
-Set other Sound Options
-Enjoy Amazing Audio Quality
HOW TO USE XTHEME ENGINE:
Just follow these steps carefully:
-Download the Apk and install it in your phone.
https://www.dropbox.com/s/3ciz2clswmxa6i7/XThemeEngine_beta5.apk
- After installing, open Xposed Installer app and from modules section...tick mark the theme engine app
- Reboot the Phone
- Install theme apk files...the ones you like... (links given below)
- Open the Theme Engine App
-Select the theme you installed
- Reboot and Enjoy
Thread from which you can get themes:
http://forum.xda-developers.com/showthread.php?t=2219999
Click to expand...
Click to collapse
Unable to install Status 7 Error on CWM Recovery
Drivers and utilities:
Drivers AutoInstaller
SP Flash Tool v3.1316.0.150
Factory ROM:
ThL_W9.130702.JB42.V12.FHD.CN.COM.8P128_MT6589_Tuber_OV12830
My ROM:
[email protected]'s ROM v3.1_Deodex
[email protected]'s ROM v3.0_Deodex
[email protected]'s ROM v2.1_Deodex
[email protected]'s ROM v2.0_Deodex
[email protected]'s ROM v1.0_Deodex
CWM Recovery 6:
CWM 6.0.3.3
CWM 6.0.3.6
Very useful, thank you for sharing. :good::good::good:
e my friend, how you install this rom ? when you use recovery and factory rom ?
I´m testing [email protected]'s ROM v2.1_Deodex thank you for sharing.
Where did you find Factory ROM? I try find it but i can´t, this is the first location where i find it the rom.
Sorry my bad english.
All my firmware are put through FlashTool.
[email protected] said:
All my firmware are put through FlashTool.
Click to expand...
Click to collapse
my friend, what is the features of your rom ?
is it fully working? worth to try it ? acceptable for all day use?
All fine...
Thank you for your work. I have just flashed your 2.1 rom and the phone is really more stable and fast than with the factory rom.
One question: I tried to flash your CWM but in flash tool when i select the scatter file you put, there is no partition selected and is not possible to flash the CWM recovery. Could you review this zip file ? I tried to flash it wqith mobile uncle toolk I couldn't either
Regards from Madrid !
GPS FIX
GPS FIX
------------
This is for anyone having GPS Issues.
Before you start the procedure you need:
1. Rooting - This rom is rooted.
2. Get Mobileuncle Tools from play store
3. Get GPS Test from play store
4. Get Root explorer from play store or internet.
Procedure should be done outdoors:
1. Turn GPS off on your phone.
2. Open Root Explorer and find the mtkgps.dat file in /data or /data/misc
3. Delete mtkgps.dat
4. Reboot phone
5. Open Mobileuncle Tools
6. Tap on 'Engineer Mode'
7. Tap on 'Engineer Mode (MTK)'
8. Scroll across to 'Location'
9. Tap on 'Location Based Service'
10. Tap on 'AGPS' and then make sure 'A-GPS On/Off' is checked
11. Tap on 'EPO' and then make sure 'Enable EPO' is checked
12. Swipe down (notification bar) and turn GPS on
13. Hit back and then tap 'YGPS'
14. Wait until you get position lock (mine took about 5 seconds).
15. This process should create a new mtkgps.dat file.
16. Hit home button and open GPS Test.
17. You should get a position lock reasonably quickly.
i needed this !
djbxp said:
GPS FIX
------------
This is for anyone having GPS Issues.
Before you start the procedure you need:
1. Rooting - This rom is rooted.
2. Get Mobileuncle Tools from play store
3. Get GPS Test from play store
4. Get Root explorer from play store or internet.
Procedure should be done outdoors:
1. Turn GPS off on your phone.
2. Open Root Explorer and find the mtkgps.dat file in /data or /data/misc
3. Delete mtkgps.dat
4. Reboot phone
5. Open Mobileuncle Tools
6. Tap on 'Engineer Mode'
7. Tap on 'Engineer Mode (MTK)'
8. Scroll across to 'Location'
9. Tap on 'Location Based Service'
10. Tap on 'AGPS' and then make sure 'A-GPS On/Off' is checked
11. Tap on 'EPO' and then make sure 'Enable EPO' is checked
12. Swipe down (notification bar) and turn GPS on
13. Hit back and then tap 'YGPS'
14. Wait until you get position lock (mine took about 5 seconds).
15. This process should create a new mtkgps.dat file.
16. Hit home button and open GPS Test.
17. You should get a position lock reasonably quickly.
i needed this !
Click to expand...
Click to collapse
i needed, Thanks
Guys, there is no time .... How come - a hat decorated theme. By the way are already being tested are new firmware version, based on the July factory. Added localization for all languages. Integrated lot of tweaks ...
New!!! 02.09.2013 [email protected]'s ROM v3.0_Deodex
Changes:
1 . The firmware is based now on official July (Chinese). Transfer is executed for 100%
2 . Are added new tweaks of energy saving
3 . The gallery and the camera is replaced
4 . The new modem from 27/07/2013
5 . Boologo - separate thanks of gormiza is customized
6 . The Google services are updated
7 . SuperSU is updated
8 . Still something, but any more I don't remember
Can you make a spec-list in the 1st thread in which you explain what you've done in you rom
and instruction for flashing cmw and rom? :angel:
Discrud and
Testing [email protected]'s ROM v3_Deodex thank you for sharing.
Cant play video in the Super Galery [email protected]'s ROM v3_Deodex.
This is how the gallery from Lenovo, with this I can not do anything ....
New!!! 08.09.2013 [email protected]'s ROM v3.1_Deodex
Changes:
1 . Bugfix
thanks for the rom
[email protected] said:
New!!! 08.09.2013 [email protected]'s ROM v3.1_Deodex
Changes:
1 . Bugfix
Click to expand...
Click to collapse
We support the domestic manufacturer and chef: :good:
Thank you very much for this amazing work
ROM download link
Recovery for DG800
What inside :
- Launcher : Trebuchet 1.0 from CyanogenMod 11
- Improved Calculator
- Google Camera from LG G2 (Support 13Mpx rear and 8Mpx front camera, working recording video with flash)
- Root with SuperUser by Chainfire
- Stock Google Calendar
- Honami Xperia Keyboard Multilanguage (Default Stock Google Keyboard)
- Fully Multilanguage (if you want more languages tell me and i add your language to rom)
for this time thats all, but still working on this rom.
—————————————————————————–
How to Install ROM
1. Go to Recovery
2. Make WIPE DATA/FACTORY RESET
3. Choose Update From SDcard
4. Choose ZIP File
5. Wait for finish
6. Press GO BACK and choose REBOOT PHONE
7. First boot take some time, be patient
—————————————————————————–
Ho to Install Recovery
1. Unpack DG800_Recovery.rar
2. Turn off phone and remove battery
3. Run Flash_tool.exe as ADMINISTRATOR from SP_Flash_Tool_v3.1328.0.183 folder
4. Choose scatter file from ctr_recovery folder
5. Put battery into phone
6. Press F9 or click DOWNLOAD BUTTON in SP Flash Tool
7. Connect phone into PC and wait for finish (you see green circle)
8. Then unlpug phone and remove battery and put into phone again
9. If you want go to recovery Turn off phone
10. Press VOL+ and POWER and wait
11. From menu choose RECOVERY (VOL+ choose, VOL- accept)
Hey All
Introducing My New Rom : Lolipop (cyan theme) For S Duos 2
Based On Stock 4.2.2 Rom
Warnings :
1. You are now Void your Warranty …….
2. Backup all your personal apps and important data to avoid loosing them …
3. Do all steps perfectly And carefully ……
4. I am not responsible for any mistake and Brick your phone ….
Features :
1. Fully S5 themed
2. Deodexed
3. Fully rooted and boaltware removed
4. Few statusbar tweeks added
5. Build prop tweeks added
6. Optimized Ram memory
7. Viper Audio fx added
8. Some nessasary apps added to system
9. int.d tweeks added
10. S5 boot animation,sounds etc added
How To Install :
1. Download 2 parts Of the Rom From 4shared Link Given Below
2. You Mast Have Clock Work Mode Recovery on your device . If not then Follow the link :
http://forum.xda-developers.com/show....php?t=2658817
3. After Download 2 parts Zip
4. Copy the Lolipop.Zip on Your SD card
5. Turn off Your Phone And press Volume up button+home button+power at a time
6. Aftar apearing CWM recovery go to install Zip and install the rom file from sd card you downloaded before
7. Now reboot system and wait for approximately 10 minutes
8. Now you are good to use this rom ......
Description is given in next reply ...
Downloads :
Rom= http://www.4shared.com/zip/_P6h6wrFce/lollipop_50_s7582.html
Patch= http://www.4shared.com/zip/bJHbUWF8ce/Patch.html
note=
clear cache first then first install patch then after Rom
BUGS :
no any kind of bugs......
You can contact me facebook= https://m.facebook.com/the.love.boy.farhan
Flashing the ROM
Did anyone flash the ROM?
No . This theme Not liked