[Mtk6575] Xtreamer AiKi tips!

[Mtk6575] Xtreamer AiKi tips! - Android General

Hello guys!
I want to have a liitle databases of helpful tips taht can be used for the AiKi.
Please add yours by repy, i'll edit this post
Boot in recovery
- Shut down the phone
- Press Power + Volume up
- Here you go!
(You can also do Power => reboot => Recovery ^^)
Unbrick The AiKi
Note : you will lose your data... the phone can't boot
What do you need:
THE WORKING RECOVERY
A Microsd 512 MB card at least
Howto :
Download the lastet version of AiKi Rom and put it at the root o the microsd card
Start in recovery
Go to Flash an update => Find the zip => [Select the aiki update]
Select your language, and go to AVANCED MODE
select your setting, but check WIPE SYSTEM
It will format the /system partition, useful if the phone can't boot
wait for restart, and enjoy!

Related

A2107A-H Firmware update, Custom Rom and CWM Recovery (calling feature - unlocked)

Finally it happend, NEW CUSTOM ROM (CWM Backup Mode) made by me.
screenshots
https://www.dropbox.com/sh/yc7z5904i0e1ua6/6FSVniszMM#/
Just see it in action: http://www.youtube.com/watch?v=joeJtkw-85c
- CWM Recovery
- Firmware version S314
- Calling feature
- Fully working google service
- Fully Roted
- Titanum Backup
- TouchPal Keyboard
- Stock Browser
- Full synchronization with google service
- Radio without headphones
and many more
The installation is very simple and will take about 5 minutes if you already have a CWM Recovery
I spend nearly whole week to build this customisation, so I decide to ask you guys for some support for my work. So if you like the job I done so far and want to see a new improvements in a future including a Jelly Bean on Lenovo A2107A-H please support me. In this case I made a auction on a EBAY for this modiffication and it will cost just a £5. Please respect my work and don't distribute my mod behind my back. If you not agreed with this, I waiting for your coments guys. Thank you.
http://www.ebay.co.uk/itm/221163148...l?_sacat=0&_from=R40&_nkw=221163148891&_rdc=1
I will send you a link to a firmware and manual after a payment
Enjoy!!!
OLD MANUAL (no files on a server)
Manual and files for installation Custom ROM + CWM Recovery + IMEI repair + ROOT + Calling Feature on IdeaPad A2107A-H
Password for archive:"xdadevpemergency"
Firmware
1. CWM Recovery ROM.
https://rapidshare.com/files/3358458529/CWM Firmware.zip
2. A2107A-H v9 ROM in a zip format for install by CWM Recovery.
https://rapidshare.com/files/241044528/A2107A-H v9.zip
3. Google apps for google store and account sync (installation by CWM Recovery)
https://rapidshare.com/files/2713449644/gapp-ics.zip
Tools
1. SP Flash Tool for formating device NAND FLASH.
https://rapidshare.com/files/1465167471/SP_Flash_Tool_v3.1206.01.zip
2. Smarthphone Multiport for Flash the CWM REcovery ROM.
https://rapidshare.com/files/2880421726/SP_MDT_src_v3.1216.02_A2012.05.22.zip
3. MTK Droid Tools for easy IMEI repair and easy ROOT install.
https://rapidshare.com/files/3431631170/MTKdroidTools.zip
Manual
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Installing main firmware
1. Copy A2107A-H v9.zip and gapp-ics.zip to sd card.
2. Boot in to CWM Recovery mode by:
- Press the "reset" button on your device
- Press and hold for a 3 sec. "power" button on your device (after 3 sec. releas the buton)
- When you see "lenovo" logo press and hold vol+ and vol- untill you will boot in to CWM Recovery mode
In a CWM Recovery Mode
Menu down = vol-
Menu up= vol+
accept= power button
1. Choose "wipe data/factory reset"
2. Choose "wipe cache partition"
3. Choose "Advanced" -> "Wipe Dalvik Cache"
4. Go to main menu of CWM Recovery mode
5. Choose "install zip from sdcard"
6. Choose "choose zip from sdcard"
7. Find the A2107A-H v9.zip file.
8. Choose "Yes - Install A2107A-H v9.zip"
Do the same think with gapp-ics.zip and reboot your device.
IMEI repair and ROOT installation
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
On this point you should have a IMEI working, if not repeat IMEI repair from point 3.
5. Press ROOT button if the program ask for anythink press "YES" (your device will reboot 2 or 3 times and it will be ready to go).
Click to expand...
Click to collapse

Reupload Please

Please reupload the tools section.
Thank you in advance

I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?

pemergency said:
I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?
Click to expand...
Click to collapse
Hi there,
Can you try http://uploaded.net/ ?
I used it for many files so far and seems to work OK.
Thank you.

re
yesterday on Chinese side get everything.
flashed - rom (lots of Chinese garbage) does - only Chinese and English.
English also very buggy - phone goes.
sorry ... google translator

.................................................

german language ?

Yes for settings and all stock app. All apps added by myself are not translated
Sent from my GT-N7000 using xda app-developers app

brief assessment of the costum rom "pemergency" mod = which must be paid
- Setup / flash -> OK
- IMEI must be corrected manually by terminal as tool does not work
- Constant error message "simcard failed" (slot2) although only 1 slot has
- "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
- Spoke only Russian / English / chinese integrated as standart
- Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?

mrbonsen said:
brief assessment of the costum rom "pemergency" mod = which must be paid
a) Setup / flash -> OK
b) IMEI must be corrected manually by terminal as tool does not work
c) Constant error message "simcard failed" (slot2) although only 1 slot has
d) "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
e) Spoke only Russian / English / chinese integrated as standart
f) Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?
Click to expand...
Click to collapse
a) no comment
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
c) This Rom is for A2107a-h which is a 2 slots device, so I dont see a problem on this point
d) I said as this is modiffication, I decide to remove a stock launcher, you can install any other one of your choice
e) I also answered to your question as for german language only original apps are translated and the main system, on other threeead is clearlly said as this rom using more locale 2 for translation.
f) and as a last one, why you expecting anything original in a modiffied ROM?
I stoping to doing anything with this ROM for a simple reason:
- FREE ROM = 900 downloads,
- PAID ROM FOR £5 = 5 downloads - embarrassing
Why?
and one more thing...
My correspondence with mrbonsen, when I tried to help him out with the installation process is also interesting. About 10 emails with instructions to mrbonsen and also 10 emails of insults from mrbonsen. That means something....
So conclusion is simply... go back to your original firmware and I will give you your £5 back

and also 10 emails of insults from mrbonsen.
Click to expand...
Click to collapse
I would, at least at three mail the conversation ended :victory:
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
Click to expand...
Click to collapse
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex

mrbonsen said:
I would, at least at three mail the conversation ended :victory:
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex
Click to expand...
Click to collapse
Hehe, ok, this is all my fault, I just should expecting as this ROM could be installed by a persona like you, my bad
BTW I using this ROM from a weak or more and have no problem at all. Waiting for comment from other users ...
Sent from my IdeaTab A2107A-H using XDA Premium HD app

And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app

pemergency said:
And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app
Click to expand...
Click to collapse
You did a great job and 900 downloads are impressive. i have a A2107A-H 1GHz 1GB RAM 16GB Flash - how come nobody is providing feedback or helping out in this development? Could there be a way to update.zip just the standard factory ROM? maybe that could be possible by doing a diff on the chinese and european source code? sorry i'm just a lamer looking to help out. any news from lenovo developers on the 4.1 release?
today is your cwm rom accessible for download for trial?

Ofcourse it is possible to get back the standard ROM just ask someone who still have a European ROM to do a copy by nandroid backup and you can restore this by centeCWM. So after that you will have a stock ROM with CWM but without calling feature.
I nearly finish another ROM with calling feature but this will be based on Russian ROM. I just need to get European system backup to do it same thing with European ROM.
Sent from my IdeaTab A2107A-H using XDA Premium HD app

Password for CWM Firmware : xdadevpemergency
NEW MANUAL AND FILES (discontinued project)
For both option's copy "clockworkmode/backup/modpemergency" folder to sdcard internal or external!!!
OPTION 1: For CWM Recovery devices:
Downloads:
Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your internal storage or external sdcard.
It should looks like this one:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore from internal sdcard" or "advanced restore" in a case of using external card
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advanced/wipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
OPTION 2: For non CWM recovery devices
Copy clockworkmode/backup/modpemergency to your external card, it should looks like this:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
downloads:
1. CWM Recovery https://hotfile.com/dl/182805290/fe4ac19/CWM_Firmware.zip.html
2. Flash Tools https://hotfile.com/dl/182820835/8dd3c06/Tools.rar.html
3. New Flash Tool without error (replacement for the one from Tools.rar package https://hotfile.com/dl/183057140/692cbbb/SP_MDT_src_v3.1216.02_A2012.05.22.zip.html
4. Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
5. USB Driver
For windows xp https://hotfile.com/dl/182950442/360c725/USB_VCOM_Driver.zip.html
For windows seven https://hotfile.com/dl/182950251/0c9ee3d/usb_driver.zip.html
Install CWM Recovery:
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
The "Data source file" and "Da file name" should have assigned path from SP_MDT_src_v3.1216.02_A2012.05.22 folder. If is not assigned properly please do the folowing steps:
- File/Open Download Agent File and choose file MTK_DATABASE.mdb from SP_MDT_src_v3.1216.02_A2012.05.22 folder
and
- Factory database/Setup data source file and choose file MTK_AllInOne_DA.bin from SP_MDT_src_v3.1216.02_A2012.05.22 folder
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Install pemergency custom ROM
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your external sdcard.
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore"
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advancedwipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
After that sometimes it is nessesary to repair IMEI
IMEI repair
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
Good Luck...

NEW ROM on the way. Will be posted on the end of this week.
- oryginal multilanguage for most of languages like in a stock european ROM (not more locale)
- fixed most bugs from the previous pemergency mod
- stock launcher
- Battery life incresed to 30% more then oryginal ROM
- Battery status in a settings
- Downloading all apps from google store (no incompatibility problem)
- Quick Boot
- Better sim management
- All options for synchronisation, like in oryginal european stock ROM
and many many more...
Finished in 98%
Anyone would like to pay for this £5?
Free update for everyone who bought the previous version!!!

ok, I certainly update :good:
may inform some user from the German forum.
pretty much at the end of the page
http://www.android-hilfe.de/lenovo-ideapad-a2-forum/341347-a2107a-root-cwm-custom-rom-5.html

Angeeks_MotoME865_4.12_6902_UISS_CN_Q2

next from angeek too !!! this rom we need to thx莫少俊熙灬 <----also chinse name :good: (nice guy)
this rom can flash it in hktw and china 4.1 both =) att user cant flash =(
The system features:
1. use aroma flash method !!
2. battery 1%mod and jelly bean status bar and apple style word...
3. odexed , zipaligned and fast gps locked
4. volume unclock and host ( dial *#*#6686#*#*)
5.repair offical jb4.1.2 bug ( repair camera , gallery ,gps , alarm, wifi )
6. new build.prop ...(from PIM-MY-ROM creator :androguide.fr)
7. add 3d gallery ( first time to in this api will little bit slow)
8.add sony bravia engine...
9.use apex launcher
10. in boot Zipaligned optimization
11. add G turbocharger ( increase 3g speed , wifi)
12. IO optimization ...increase open apk speed
13. add new v6 super charger -U9-RC12-T6 (will more power save ) (from xda - zeppelinrox)
14. improve photo quality ( from xda -pimp-my-rom -------Androguide.fr)
15. use boost v3 ....stable ram using ...
16. LED light control and cpu control ...etc ... find it in system setting!!!!!!!!!!!!!!
17.tune the lowest screnn light ~!
18. in aroma flast mode ...u can choose many patch or simplify .......as u like( i dont know is it chinese or english in this aroma mode==)
19.. still have a lot....u find it urself!!
image:
http://attachment.angeeks.com/forum/201302/14/222838s65hn4xsdludipi2.jpg
http://attachment.angeeks.com/forum/201302/14/222838s65hn4xsdludipi2.jpg
http://attachment.angeeks.com/forum/201302/14/222836qmcpbczovm49hc7p.jpg
http://attachment.angeeks.com/forum/201302/14/22283390400mq9dyuud9ck.jpg
Download link :http://pan.baidu.com/share/link?shareid=261038&uk=4046361900
google sever pack :http://pan.baidu.com/share/link?shareid=167901&uk=2600960059
remember use the new boot menu to flash this rom =)
flash in zip~!!!!!!!!!:good:
flash instruction:
1. download the rom , u will saw Angeeks_MotoME865_4.12_6902_UISS_CN_Q2.zip and put it in SD card!
2.go to recovery
3.choose wipe & clean and wipe data & cache(factory reset) -YES-
4.choose wipe & clean enter in and wipe cache enter in - yes -
5. choose wipe & clean enter in and choose wipe dalvil cache enter in - yes-
6.choose wipe & clean enter in , wipe battery stats enter in - yes-
7.after wipe ...then choose install zip package and enter
8.then install a zip package and enter
9.scroll down to Angeeks_MotoME865_4.12_6902_UISS_CN_Q2.zip and enter
10.scroll down to yes and enter
11,wait.......(u will see some UISS team photo)
12.show welcome and type 下一步(next step)
13.will show another flash mode and some agreement ....and see a box to tick... and press下一步(next step)
14.press 下一步(next step)
15.then will in auto delect date ,,after that press下一步(next step )
16. u will in aroma flash mode ....there are 3 type to let u chooose
1.是默认安装(install default) 2. 是精简安装 (simplify installation ) 3.( custom select ) (u can try if u know chinese )
17.after choose installation , press下一步(next step )
18.will enter the installation interface then press开始(start button) in right bottom conner
19.wait,,,unitl finish=)
20.after install press 下一步(next step)
21. finallly finish all installation...and press 完成(finish)
dont touch anything until it enter to the start boot!!
orignal post http://bbs.angeeks.com/forum.php?mo...lter=author&orderby=dateline&orderby=dateline

so far have you observed any bugs?

[HOW-TO] ROOT, CMW, AND JB 4.3 from stock 2.2.1 without a computer [HOW-TO]

hi this is a tutorial of how i got from froyo (android version 2.2) to Jellybean (android version 4.3) without using a computer
ok so here are a few things you will need:
1x micro sd card (incase your data doesnt work to transfer files from computer or other device to phone)
1x a way to use micro sd card in computer (or other device)
Roms:
1x GB rom (the one i used is here)
1x ICS Rom (i used cm9 by entropy found here)
1x JB Rom + gapps (and i used scotts unoffical cm10.2 found here)
1x 3e Recovery (you can find this here and here is a video showing you how to use it)
***APP***
ROOT BROSWER ( or the one mentioned in the video)
ROM MANAGER
FRAMAROOT
ok so lets get to it... oh yeah
**************************** DISCLAIMER**********************
I TAKE NO CREDIT FOR THESE FILES AND APPS AND I ALSO AM NOT RESPONISIBLE IF YOU END UP
GETTING A REALLY EXPENSIVE BRICK NOR IS ANYONE ELSE BUT YOUR SELF
-----------------------------------------------------------TUTORIAL----------------------------------------------
ok download the files and install the apps from above
have them on your infuse (by any means you can i had to download them on my s3 and transfer them via sdcard)
ok
STEP 1:
- use framaroot to root your devicejust open it and press aragorn( i assume all infuses will have the same exploit name)
- reboot
STEP 2:
- open rom manager and click install recovery and select galaxy i9000 (they have the same partitions)
itll download a zip
STEP 3:
- follow the video for the 3e recovery installation posted above^
STEP 4:
- reboot revocery but powering off the device and pressing and holding vol up and down and power, once you see samsung come up release power
(once in recovery it should say 3e recovery at the top)
- select install update zip (vol up and down move from one item to the next and power selects it)
(your screen should go blank then come back up in clock work mod recovery)
- once in clock work mod recovery go to wipe data (say yes)
- then wipe cache (say yes) then go to advanced and wipe davlic cache (say yes)
- go back and go into mounts and storage and format system (say yes)
-go back select install zip from sdcard find the zip for the GB rom and select it and select yes ==HURRAY YOU JUST FLASHED A ROM==
- go back and select reboot device
STEP 5:
- once your phone boots up and is loaded go back into recovery (via three button method)
- then repeat the wipes and formatting
- then go to install zip from sdcard, and flash the ICS rom (warning you will get rainbow recovery, but you should still be able to navigate it)
- go to advanced and reboot recovery and flash it again
- once the second flash it done reboot device
FROM THIS POINT ON PLEASE REMOVE THE MICRO SDCARDS FROM THE DEVICE
STEP 6: (for now on the wipes and formating will be called wiping)
- once the device has booted in to cm9 reboot recovery again
- you will still have rainbow recovery but go and wipe it again
- and go and flash the JB Rom (if its one of scotts the first time the flash will fail just flash again)
- after the second flash it should auto boot into recovery (where you will see that it is fixed and no more rainbow)
- flash the JB rom once more and this time flash the gapps as well
REBOOT!
AND THERE YOU GO FROM FROYO (2.2) TO JB (4.3)
IF THIS HAS HELPED OR YOU FIND THIS INFORMATIVE PLEASE PRESS THAT THANKS BUTTON

VIBE 1.5 Official Rom For S850

VIBE 1.5 Official Rom For S850
For phones with CN (Chinese) Firmware .
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP For CN .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all -> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
.
For phones with ROW Firmware
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP for ROW .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all punkty-> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
Click to expand...
Click to collapse
The CN - DOWNLOAD (Full version)
The CN - DOWNLOAD ( Lite version)
The CN - DOWNLOAD (deodexed Lite version)
The ROW - DOWNLOAD (Lite version)
lite version-removed bloatware,some unnecessary apps,no dolby
.

VIBE 2.0 Stock Rom For S850

VIBE 2.0 stock Rom For S850
For phones with CN (Chinese) Firmware .
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP For CN .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all -> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
.
For phones with ROW Firmware
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP for ROW .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all punkty-> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
Click to expand...
Click to collapse
The ROW - DOWNLOAD
.

Database Info

welcome