VIBE 2.0 stock Rom For S850
For phones with CN (Chinese) Firmware .
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP For CN .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all -> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
.
For phones with ROW Firmware
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP for ROW .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all punkty-> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
Click to expand...
Click to collapse
The ROW - DOWNLOAD
.
Related
Hello guys!
I want to have a liitle databases of helpful tips taht can be used for the AiKi.
Please add yours by repy, i'll edit this post
Boot in recovery
- Shut down the phone
- Press Power + Volume up
- Here you go!
(You can also do Power => reboot => Recovery ^^)
Unbrick The AiKi
Note : you will lose your data... the phone can't boot
What do you need:
THE WORKING RECOVERY
A Microsd 512 MB card at least
Howto :
Download the lastet version of AiKi Rom and put it at the root o the microsd card
Start in recovery
Go to Flash an update => Find the zip => [Select the aiki update]
Select your language, and go to AVANCED MODE
select your setting, but check WIPE SYSTEM
It will format the /system partition, useful if the phone can't boot
wait for restart, and enjoy!
VIBE 1.5 Official Rom For S850
For phones with CN (Chinese) Firmware .
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP For CN .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all -> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
.
For phones with ROW Firmware
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP for ROW .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all punkty-> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
Click to expand...
Click to collapse
The CN - DOWNLOAD (Full version)
The CN - DOWNLOAD ( Lite version)
The CN - DOWNLOAD (deodexed Lite version)
The ROW - DOWNLOAD (Lite version)
lite version-removed bloatware,some unnecessary apps,no dolby
.
Stock Rom running on android 4.2.2, must have a root.
What does not work
Vpn does not work.
When the headset is connected (headphones) with an incoming call, if you pick up the phone, the network drops for about 30 seconds, before removing the headset. In vibration mode.
Even small bugs are possible.
It is very important to first back up NVRAM using MobileUncleTools
Installation
1) Installing custom recovery TWRP:
- Install the application Mobileuncle_MTK_Tools.
- The file recovery.img from the folder TWRP-3.0.2-0 is transferred to the root of the memory card.
- Start MobileUncle Tools, give the application Root rights, select Recovery Update, select our file recovery.img
- After completion we reboot Into Recovery Mode, we must have TWRP-3.0.2-0
2) Installing the ROM:
- In TWRP choose Wipe - Advanced Wipe - mark System, Data, Dalvik cache, Cache - do Swipe to Wipe. After the successful completion, go to the main menu.
- Select Reboot - Recovery. Reboot the recovery.
- In the main menu select Install - select our firmware file cm13_S898t.zip - do Swipe to confirm Flash.
After the successful completion, do a Cleanup of cache / dalvik and the Reboot System.
- We are waiting for the successful completion of downloading and setting ROM cm13.
Gaps are built in the archive with firmware.
Download
- Mobileuncle_MTK_Tools.apk - Download
- Recovery TWRP-3.0.2-0_S898t - Download
- ROM cm13_S898t.zip - Download
Reserved.
Many thanks @toy_story. Such users neeed a forum.. :good:
(EDIT)
OneUI 4.1 has finally arrived, if you haven't got your Tab s6 rooted, you can just follow the instructions below. This new part is for the people who followed the guide to root their Tab s6 and now want to update to the new firmware version without losing their data. This guide is inspired in https://forum.xda-developers.com/t/...te-rooted-device-whilst-keeping-data.4245989/. But for simplicity of search I have decided to place it here
(END OF EDIT)
I ran into some problems and took some time to figure out how to install TWRP and root the tablet. The normal procedure by which you flash TWRP and then flash Magisk doesn't work as the download mode won't accept non-official files.
Then, once I got my tablet rooted by the patching method of Magisk, I installed TWRP with their app and got stuck in the logo due to not formatting the data.
After some research and quite a lot of time, I managed to get around that and be able to do everything.
Here is a step by step detailed guide of how to do so.
ATTENTION: These modifications void your warranty and may brick your device. I am in no way responsible for any damage you may cause. Follow this guide at your own risk
Requirements:
-> Latest version of the firmware of your model (I used this site which had the latest version and decent download speeds https://galaxyfirmware.com/model/SM-T860)
(To find which version to download, go into the Phone app, and type *#1234#)
-> Latest Magisk.apk file (https://github.com/topjohnwu/Magisk/releases)
-> Disbale_Dm-Verity_ForceEncrypt zip file (https://zackptg5.com/android.php#disverfe)
-> Latest TWRP img (https://eu.dl.twrp.me/gts6l (europe) or https://dl.twrp.me/gts6l (americas))
-> Official TWRP tool (Play Store)
-> Samsung drivers (https://developer.samsung.com/android-usb-driver)
-> Latest Version of Odin (https://odindownload.com/SamsungOdin)
-> SD Card or Minimal ADB and Fastboot (https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790)
(If SD card)
Copy Magisk, AP file from the firmware zip, Disable_dm zip and TWRP img into the SD card, else, you will have to use adb sideload
0. Create a backup of all your data (we are going to wipe the data of the tablet)
(Tablet)
1. Activate developer settings (go to Settings->About Tablet->Software information, and tap 5 times on build number).
2. Go into developer settings and activate OEM unlocking and USB debugging.
3. Turn off the tablet and turn it back on pressing Power + Vol. Down buttons to enter Device Unlock Mode.
4. Press and hold Vol. Up and in the next menu, press Vol. Up to unlock the bootloader (attention, this will erase all of your data)
5. Run through the setup, but be sure to activate the internet (this will prevent the tablet from relocking).
6. Activate developer settings again, and go into it to check that OEM unlocking is greyed out.
7. Install Magisk
(PC)
8. (No SD) Copy the AP file to the Tablet.
(Tablet)
9. Go into Magisk, press Install->Patch a file->Recovery mode (on)->Select file (The AP file).
10. Copy the patched file back into your computer.
11. Shut down the tablet.
12. Press Vol. Up + Vol. Down and connect the tablet to your computer with a USB to enter download mode.
(PC)
13. Open Odin, it should show that your device is connected.
14. Go to the settings tab and uncheck the Auto-Reboot option.
15. Flash all the files of the latest firmware, using CSC (not HOME_CSC) but substituting the AP file with the patched one. (With the WiFi version, you might not have a CP file, don't worry)
CRITICAL STEP (if not followed correctly, may lead to bootloop)
(Tablet)
16. Once the flashing is complete, press Vol. Down + Power during 7 seconds to restart the tablet. As soon as the screen blacks out, swap to Vol. Up + Power (and keep pressing even though it asks to press power) to enter the recovery.
17. In the recovery, navigate to Wipe data/factory reset with the volume buttons and press power button to select. Confirm and reboot.
18. While rebooting, you need to press Vol. Up + Power during 3 seconds (Until the press power to continue appears). This is due to Magisk being installed in the recovery partition.
19. Run through the setup again, but this time you need to login into your google account to enter the Play Store.
20. You should have the Magisk app installed. Open it and it will configure itself.
21. When it reboots, press again Vol. Up + Power for 3 sec.
22. Download the Official TWRP app.
(PC)
23. (No SD) Copy the latest TWRP image previously downloaded into the tablet.
(Tablet)
24. Go into the TWRP app and give it root permissions.
25. Enter TWRP flash and select the latest TWRP img
26. Go into the reboot menu and select reboot recovery.
27. The phone will reboot into TWRP.
28. Tick don't show this message again and slide to allow modifications.
29. Wipe -> Wipe data, Cache and Dalvik and Format data.
30. Reboot -> Recovery.
31. (SD) Flash Disable_DM-Verity zip, and then flash Magisk zip.
32. (No SD) enter the advanced menu and open adb sideload. Connect to the PC, open Minimal adb and fastboot and adb sideload the zip files.
33. Reboot system
Congrats, you have a rooted Samsung Galaxy tab S6 with TWRP installed!
FAQ:
1) Ok, I f* up, I am now stuck in the Samsung logo, what do I do?
Press Power and Vol. Down for 7 seconds, this will auto reboot your tablet. Then, as soon as the screen goes off, try to press Vol. Down + Vol. Up and connect through USB to the PC. With some luck, you manage to get into download mode. If you don't, repeat.
Flash the files with the Magisk modified AP, reboot into recovery and factory reset (follow the next instructions if you want to install TWRP), or else flash the stock rom.
2) I am seeing some screens with some warning messages, is that Ok?
Yes, it is normal, Samsung does that to scare people off from installing modifications on their devices. Can I take them off? Yes, but it is not a simple process. If you really want to, follow this guide, but adapting to the device (https://forum.xda-developers.com/t/...sage-on-samsung-a30-after-root-device.3954589). Another important thing is, when you want to enter recovery, you need to keep pressing Vol. Up + Power, even when the tablet displays the message that asks to press the power button.
3) Don't know... You ask
Works perfectly, thank you!
I have a question: to decrypt the internal memory which files can I flash?
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S8 (dreamlte Exynos SOC) or S8+ (dream2lte) Stock to Android 13 / LineageOS 20
This detailed step-by-step guide helps you transform your Samsung Galaxy S8 dreamlte or S8+ dream2lte to a powerful one with Android 13.
Make sure your phone is dreamlte/dream2lte/Exynos before going further: in Android, go to Settings > About phone > Check model number is listed below.
If not, quit this tutorial.
Supported models:
- SM-G950F
- SM-950FD
- SM-G955F (S8+)
### READ THOSE WARNING COMMENTS
CHANGELOG
v1. Initial release for Android 13, Netflix and Disney+ work
1) DOWNLOAD
- djibe Galaxy S8 dreamlte pack: https://bit.ly/djibe-galaxys8-pack
(contains Samsung tweaked Odin 3.13.1 + Samsung official USB drivers + TWRP 3.7.0_9-0 official recovery + Magisk Root + Magisk modules). Unzip files.
+ ROM Unofficial LineageOS 20: https://forum.xda-developers.com/t/...spoofing-ota-updates-for-s8-s8-note8.4485525/
Download latest build for your device: https://ivanmeler.github.io/devices/dreamlte.html
+ BiTGApps Package ARM64 13 (BASIC or any other): https://github.com/BiTGApps/BiTGApps-Release/releases
OR NikGApps T Basic: https://sourceforge.net/projects/nikgapps/files/Canary-Releases/NikGapps-T/
OR MindTheGApps 13 ARM64: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
+ Charge phone to 100%
2) BACKUP DATA
Install Samsung USB drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use Google built-in cloud to backup apps like SMS Backup & Restore to backup texts, contacts, etc.
Backup your WhatsApp messages in Google Drive.
Everything else: podcasts, Authenticators, TODOs etc...
Then copy the backup on your PC.
Make sure you have latest official updates for your phone:
Connect to Wifi and go to Settings > Software update > Download and install.
### BACKUP NOW, you will lose everything.
3) FLASH TWRP 3.7 RECOVERY
Go to Settings > About phone > Software information.
Tap 7 times on Build number item to unlock Developer options.
Go to Settings > Developer options, switch OEM unlocking ON.
Shut down phone.
Boot in Download Mode: hold Volume- + Bixby button (located below volume) and then Power button until you see Samsung's logo and release all buttons.
Confirm access to Download mode by pressing Volume+.
Phone now displays "Downloading...".
Connect phone to computer with USB, wait for drivers installation.
Then launch Odin.exe (included in my zipfile) and wait for Odin indicator ID:COM to become blue.
In options: make sure re-partition and Auto Reboot are NOT ticked while F. Reset Time is ticked.
In AP > select twrp-3.7.0_9-0-dreamlte.img.tar
### For Galaxy S8+, select twrp-3.7.0_9-0-dream2lte.img.tar
### Warranty will be Void after next click ###
Click Start.
Wait until flash Success message appears.
Unplug phone.
Restart phone to recovery :
- hold Power + Bixby + Volume- until phone screen becomes black.
- and immediatly switch from Volume- to Volume+ (still holding Power + Bixby) to land in TWRP recovery.
### If Android launches, hold 3 buttons until phone restarts and Samsung logo appears.
4) BACKUP IMEI PARTITION AND SYSTEM (Nandroid backup)
Boot in Recovery Mode : Hold Bixby + Power + Volume+ until you see Samsung's logo then release and wait a few seconds for TWRP recovery to boot.
Recovery asks for Keep System Read Only ? > Swipe to Allow Modifications.
Go to Wipe > Format Data.
Type: yes and confirm with bottom right check icon.
Encryption is removed. You can now access partitions.
### If you miss this step you won't have access to any partition.
Back to home menu > Backup.
You can now select the partitions you want to save.
Select at least EFS partition to backup your IMEI. If a flash fails and partition is damaged you will still be able to restore this partition and use the phone.
If IMEI is lost during a flash, phone won't be able to reach cellphone networks.
I prefer to backup Boot, System, System Image, Baseband and EFS partitions. In case of problem, you will have your phone in its original state.
Swipe to Backup and wait during process.
Save backup: still under TWRP recovery, connect phone to PC.
Go to Mount menu and check Data partition is checked and MTB button is on "Disable MTP" state.
From Windows explorer, access phones memory and copy-paste the TWRP folder (located in root folder, beside DCIM and Music folders) somewhere safe on your computer.
5) FORMAT PARTITIONS
### Make sure you copied TWRP backup from internal memory to somewhere safe.
Go to Wipe > Advanced wipe,
select Dalvik, Cache, System, Data, Internal Storage (if you really made a backup from step 2), then Swipe to Wipe.
Back to TWRP home screen, go to Reboot > Recovery and swipe to reboot.
On next launch, check the checkbox to remember choice and swipe to allow modifications.
6) FLASH ROM, (MAGISK ROOT) AND GAPPS
Back to TWRP main menu, go to Mount menu again to connect phone to PC again.
Connect phone to PC and use Windows explorer to copy files on phone's internal memory.
Copy TWRP folder from your phone to somewhere safe on PC.
This backup can restore your phone to its original Samsung state.
Copy files of ROM + GApps + Magisk on phone.
Go back to TWRP Home menu. Then tap on Install > choose lineage*.zip
then Swipe to confirm Flash.
Wait for operation to end.
Again, go to Reboot > Recovery.
After restart, go back to Install and select bitgapps*.zip
Optional for root: Add More zips > Magisk*.zip
then Swipe to confirm Flash.
Then tap Wipe cache/dalvik, swipe to confirm,
and Reboot System.
Wait for the phone to boot during 3 minutes.
7) ROOT ACCESS (OPTIONAL)
### Needed to work with Netflix or Disney+
Configure Android as you like.
Don't try to set fingerprints at first setup. It will crash.
No need for extra work to be root.
Magisk launches with Android.
Superuser permissions can be managed from Magisk Manager app.
Launch Magisk.
Then in Magisk go to Settings > Hide the Magisk app, give it a name and switch Zygisk option ON.
Go to Modules Tab > Install from Storage: install MagiskHidePropsConfig and safetynet (located in my archive).
Unlock Developer options: go to Settings > About.
At the bottom, tap 7 times on Build number.
Go to Settings > System > Advanced > Developer options > Disable Android debugging (ADB).
Reboot phone.
8) TWEAKS
- Remove ROM install files: TWRP > Advanced > File Manager > data > media
Tap on each file to Delete it.
- Calibrate battery: https://www.ifixit.com/Wiki/Battery_Calibration
- Set dark Mode to improve battery by 30%
Settings > Display > Dark theme.
- For better battery, remove Always on display
Settings > Display > Screen saver > Desactivated
- Screen sensitivity is too low ?
Try to recalibrate screen sensitivity with https://play.google.com/store/apps/details?id=touchcalibration.favoritappindia&hl=en&gl=US
Enjoy,
djibe
Thanks: @Ivan_Meler, LineageOS team, TWRP team, TopJohnWu
---------------------------------------
Force Samsung Galaxy S8 shutdown
Hold Power + Volume down for 10 seconds
Added S8+