Database Info

[Mtk6575] Xtreamer AiKi tips!

Hello guys!
I want to have a liitle databases of helpful tips taht can be used for the AiKi.
Please add yours by repy, i'll edit this post
Boot in recovery
- Shut down the phone
- Press Power + Volume up
- Here you go!
(You can also do Power => reboot => Recovery ^^)
Unbrick The AiKi
Note : you will lose your data... the phone can't boot
What do you need:
THE WORKING RECOVERY
A Microsd 512 MB card at least
Howto :
Download the lastet version of AiKi Rom and put it at the root o the microsd card
Start in recovery
Go to Flash an update => Find the zip => [Select the aiki update]
Select your language, and go to AVANCED MODE
select your setting, but check WIPE SYSTEM
It will format the /system partition, useful if the phone can't boot
wait for restart, and enjoy!​

VIBE 2.0 Stock Rom For S850

VIBE 2.0 stock Rom For S850
For phones with CN (Chinese) Firmware .
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP For CN .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all -> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
.
For phones with ROW Firmware
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP for ROW .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all punkty-> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
Click to expand...
Click to collapse
The ROW - DOWNLOAD
.

[ROM][Unofficial][6.0.1]CyanogenMod13 for Lenovo S898t + (aka Golden Warrior)

Stock Rom running on android 4.2.2, must have a root.
What does not work
Vpn does not work.
When the headset is connected (headphones) with an incoming call, if you pick up the phone, the network drops for about 30 seconds, before removing the headset. In vibration mode.
Even small bugs are possible.
It is very important to first back up NVRAM using MobileUncleTools
Installation
1) Installing custom recovery TWRP:
- Install the application Mobileuncle_MTK_Tools.
- The file recovery.img from the folder TWRP-3.0.2-0 is transferred to the root of the memory card.
- Start MobileUncle Tools, give the application Root rights, select Recovery Update, select our file recovery.img
- After completion we reboot Into Recovery Mode, we must have TWRP-3.0.2-0
2) Installing the ROM:
- In TWRP choose Wipe - Advanced Wipe - mark System, Data, Dalvik cache, Cache - do Swipe to Wipe. After the successful completion, go to the main menu.
- Select Reboot - Recovery. Reboot the recovery.
- In the main menu select Install - select our firmware file cm13_S898t.zip - do Swipe to confirm Flash.
After the successful completion, do a Cleanup of cache / dalvik and the Reboot System.
- We are waiting for the successful completion of downloading and setting ROM cm13.
Gaps are built in the archive with firmware.
Download
- Mobileuncle_MTK_Tools.apk - Download
- Recovery TWRP-3.0.2-0_S898t - Download
- ROM cm13_S898t.zip - Download

Reserved.

Many thanks @toy_story. Such users neeed a forum.. :good:

[GUIDE] Pantech Vega R3 IM-A850 S/K/L from KiKat to Nougat

Notes:
- I'm not the developer of the ROM. ROM developer's link is at the bottom of the thread. Support him for his brilliant work.
- You need to be in stock ROM (4.4.2) in order to flash the recovery!
- Flash at your own risk. This ROM is not stable yet!
FILES NEEDED
- ROOT -
http://4shared.com/mobile/efYolQsrce/tr_2.html
- Recovery Flash Tool - http://www.4shared.com/mobile/Svw_WpXTba/recovery.html
- RECOVERY - https://dev.androidfilehost.com/?fid=24052804347779407
- ROM - https://sourceforge.net/projects/ng...e-14.1-20170424-UNOFFICIAL-ef50l.zip/download
- SU/ROOT - SuperSU/Magisk/LOS Root
- GApps - opengapps.org - Choose ARM - Choose GApps type Pico/Nano (recommended)
Steps:
Step One - "Preparing Files"
- Extract .zip file and copy/cut recovery.img to sdcard
- Copy/cut all downloaded .apk and .zip files to sdcard as well
Step Two - "Rooting"
- Install tr_2.apk
- Tap make in ra1n
- Wait for few seconds
- A pop-up will show up that root has been installed
Step Three - "Flashing Recovery"
- Install recovery.apk
- Grant Root Access
- Wait for few seconds
- A pop-up will show up that you need to backup your current stock recovery. Make a backup
- Tap flash recovery
- Tap other from storage
- Locate where you place recovery.img that you extracted
- Tap recovery.img
- Wait for few seconds
- A pop-up will show up that you need to reboot/restart your phone to complete the process
- Tap reboot/restart
Step Four A - "Installing Nougat for Newbies"
- Power off the phone
- Wait 5 seconds
- Hold +Volume + -Volume + Power at the same time
- Use +Volume and -Volume to navigate through the menu
- Choose RECOVERY
- Wait for few seconds
- Tap Wipe
- Slide Factory Reset
- Wait for few seconds
- Tap Back
- Tap Advance Option
- Tap Dalvik Cache, Cache, Data, System and Internal Storage
- Swipe to Confirm
- Wait for few seconds
- Tap Back
- Head to the Menu
- Tap Install
- Locate external_sd
- Tap external_sd
- Tap the ROM, SU/ROOT (optional) and GApps (the add button is in the top right corner)
- Swipe to Confirm
- Wait for few seconds
- Tap Wipe dalvik/cache
- Wait for few seconds
- Tap Reboot
- Wait 'till installation is finish (est. time - 5-10 minutes)
- Enjoy
Step Four B - "Installing Nougat for Experienced"
- Power off the phone
- Wait 5 seconds
- Hold +Volume + -Volume + Power at the same time
- Use +Volume and -Volume to navigate through the menu
- Choose RECOVERY
- Wait for few seconds
- Do a Factory Reset first
- Wipe Dalvik Cache, Cache, Data, System and Internal Storage
- Install ROM
- Install SU/ROOT (optional)
- Install GApps
- Tap Wipe dalvik/cache (necessary) after successful flashing
- Wait 5-10 minutes
- Enjoy
Not Working
- Bluetooth
- Data
- Others?
Credits:
OpenGApps
Magisk
SuperSU
LineageOS
ROM Developer:
Nguyenhung9x
XDA Profile - https://forum.xda-developers.com/member.php?u=7770592
Donate to the developer for continue support to this device.

Bluetooth not working!!!
ma'am/sir i appreciate your work, but the bluetooth sir is not working... plsss kindly fix asap hehe thank you ma'am/sir for your hard work.

I dont have an Micro SD. How should I do?? Can I do without formating Internal Storage??

I bought an SD, from sandisk but couldn't download that TWRP but had the one which has same version and same dev.(Have it in HDD,Labeled for A850*)So, i did those steps and the rom would't finish installing even in 2 hours. What Should I Do?? CM and RR roms only took five minutes....

I managed to recover my dad's old [this phone] that initially ran Kitkat 4.4. Well, it worked, though sometimes it may cause some issues which is from the hardware side, or it is, or something else. Thanks.

P/S: well I found an issue for it recently though, after a while of using there's chance of your device suddenly gets bootlooping but it's like that it could get to the lock screen, but suddenly go back to the boot animation, and then it recurs the phenomenom. Not sure if the error comes from device side or the ROM being unstable.
Edit: perhaps my battery is the problem. Sometimes it suddenly shut the phone off while there're still 50% left. But at least I think so.

barnacl437 said:
P/S: well I found an issue for it recently though, after a while of using there's chance of your device suddenly gets bootlooping but it's like that it could get to the lock screen, but suddenly go back to the boot animation, and then it recurs the phenomenom. Not sure if the error comes from device side or the ROM being unstable.
Edit: perhaps my battery is the problem. Sometimes it suddenly shut the phone off while there're still 50% left. But at least I think so.
Click to expand...
Click to collapse
That's a pretty common issue, it might as well be fixable though.
Remove your battery and try cleaning the contact between the battery and the device using an eraser.

[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S8 or S8+ Stock to Android 13

[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy S8 (dreamlte Exynos SOC) or S8+ (dream2lte) Stock to Android 13 / LineageOS 20
This detailed step-by-step guide helps you transform your Samsung Galaxy S8 dreamlte or S8+ dream2lte to a powerful one with Android 13.
Make sure your phone is dreamlte/dream2lte/Exynos before going further: in Android, go to Settings > About phone > Check model number is listed below.
If not, quit this tutorial.
Supported models:
- SM-G950F
- SM-950FD
- SM-G955F (S8+)
### READ THOSE WARNING COMMENTS
CHANGELOG
v1. Initial release for Android 13, Netflix and Disney+ work
1) DOWNLOAD
- djibe Galaxy S8 dreamlte pack: https://bit.ly/djibe-galaxys8-pack
(contains Samsung tweaked Odin 3.13.1 + Samsung official USB drivers + TWRP 3.7.0_9-0 official recovery + Magisk Root + Magisk modules). Unzip files.
+ ROM Unofficial LineageOS 20: https://forum.xda-developers.com/t/...spoofing-ota-updates-for-s8-s8-note8.4485525/
Download latest build for your device: https://ivanmeler.github.io/devices/dreamlte.html
+ BiTGApps Package ARM64 13 (BASIC or any other): https://github.com/BiTGApps/BiTGApps-Release/releases
OR NikGApps T Basic: https://sourceforge.net/projects/nikgapps/files/Canary-Releases/NikGapps-T/
OR MindTheGApps 13 ARM64: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
+ Charge phone to 100%
2) BACKUP DATA
Install Samsung USB drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use Google built-in cloud to backup apps like SMS Backup & Restore to backup texts, contacts, etc.
Backup your WhatsApp messages in Google Drive.
Everything else: podcasts, Authenticators, TODOs etc...
Then copy the backup on your PC.
Make sure you have latest official updates for your phone:
Connect to Wifi and go to Settings > Software update > Download and install.
### BACKUP NOW, you will lose everything.
3) FLASH TWRP 3.7 RECOVERY
Go to Settings > About phone > Software information.
Tap 7 times on Build number item to unlock Developer options.
Go to Settings > Developer options, switch OEM unlocking ON.
Shut down phone.
Boot in Download Mode: hold Volume- + Bixby button (located below volume) and then Power button until you see Samsung's logo and release all buttons.
Confirm access to Download mode by pressing Volume+.
Phone now displays "Downloading...".
Connect phone to computer with USB, wait for drivers installation.
Then launch Odin.exe (included in my zipfile) and wait for Odin indicator ID:COM to become blue.
In options: make sure re-partition and Auto Reboot are NOT ticked while F. Reset Time is ticked.
In AP > select twrp-3.7.0_9-0-dreamlte.img.tar
### For Galaxy S8+, select twrp-3.7.0_9-0-dream2lte.img.tar
### Warranty will be Void after next click ###
Click Start.
Wait until flash Success message appears.
Unplug phone.
Restart phone to recovery :
- hold Power + Bixby + Volume- until phone screen becomes black.
- and immediatly switch from Volume- to Volume+ (still holding Power + Bixby) to land in TWRP recovery.
### If Android launches, hold 3 buttons until phone restarts and Samsung logo appears.
4) BACKUP IMEI PARTITION AND SYSTEM (Nandroid backup)
Boot in Recovery Mode : Hold Bixby + Power + Volume+ until you see Samsung's logo then release and wait a few seconds for TWRP recovery to boot.
Recovery asks for Keep System Read Only ? > Swipe to Allow Modifications.
Go to Wipe > Format Data.
Type: yes and confirm with bottom right check icon.
Encryption is removed. You can now access partitions.
### If you miss this step you won't have access to any partition.
Back to home menu > Backup.
You can now select the partitions you want to save.
Select at least EFS partition to backup your IMEI. If a flash fails and partition is damaged you will still be able to restore this partition and use the phone.
If IMEI is lost during a flash, phone won't be able to reach cellphone networks.
I prefer to backup Boot, System, System Image, Baseband and EFS partitions. In case of problem, you will have your phone in its original state.
Swipe to Backup and wait during process.
Save backup: still under TWRP recovery, connect phone to PC.
Go to Mount menu and check Data partition is checked and MTB button is on "Disable MTP" state.
From Windows explorer, access phones memory and copy-paste the TWRP folder (located in root folder, beside DCIM and Music folders) somewhere safe on your computer.
5) FORMAT PARTITIONS
### Make sure you copied TWRP backup from internal memory to somewhere safe.
Go to Wipe > Advanced wipe,
select Dalvik, Cache, System, Data, Internal Storage (if you really made a backup from step 2), then Swipe to Wipe.
Back to TWRP home screen, go to Reboot > Recovery and swipe to reboot.
On next launch, check the checkbox to remember choice and swipe to allow modifications.
6) FLASH ROM, (MAGISK ROOT) AND GAPPS
Back to TWRP main menu, go to Mount menu again to connect phone to PC again.
Connect phone to PC and use Windows explorer to copy files on phone's internal memory.
Copy TWRP folder from your phone to somewhere safe on PC.
This backup can restore your phone to its original Samsung state.
Copy files of ROM + GApps + Magisk on phone.
Go back to TWRP Home menu. Then tap on Install > choose lineage*.zip
then Swipe to confirm Flash.
Wait for operation to end.
Again, go to Reboot > Recovery.
After restart, go back to Install and select bitgapps*.zip
Optional for root: Add More zips > Magisk*.zip
then Swipe to confirm Flash.
Then tap Wipe cache/dalvik, swipe to confirm,
and Reboot System.
Wait for the phone to boot during 3 minutes.
7) ROOT ACCESS (OPTIONAL)
### Needed to work with Netflix or Disney+
Configure Android as you like.
Don't try to set fingerprints at first setup. It will crash.
No need for extra work to be root.
Magisk launches with Android.
Superuser permissions can be managed from Magisk Manager app.
Launch Magisk.
Then in Magisk go to Settings > Hide the Magisk app, give it a name and switch Zygisk option ON.
Go to Modules Tab > Install from Storage: install MagiskHidePropsConfig and safetynet (located in my archive).
Unlock Developer options: go to Settings > About.
At the bottom, tap 7 times on Build number.
Go to Settings > System > Advanced > Developer options > Disable Android debugging (ADB).
Reboot phone.
8) TWEAKS
- Remove ROM install files: TWRP > Advanced > File Manager > data > media
Tap on each file to Delete it.
- Calibrate battery: https://www.ifixit.com/Wiki/Battery_Calibration
- Set dark Mode to improve battery by 30%
Settings > Display > Dark theme.
- For better battery, remove Always on display
Settings > Display > Screen saver > Desactivated
- Screen sensitivity is too low ?
Try to recalibrate screen sensitivity with https://play.google.com/store/apps/details?id=touchcalibration.favoritappindia&hl=en&gl=US
Enjoy,
djibe
Thanks: @Ivan_Meler, LineageOS team, TWRP team, TopJohnWu
---------------------------------------
Force Samsung Galaxy S8 shutdown
Hold Power + Volume down for 10 seconds

Added S8+