Notes:
- I'm not the developer of the ROM. ROM developer's link is at the bottom of the thread. Support him for his brilliant work.
- You need to be in stock ROM (4.4.2) in order to flash the recovery!
- Flash at your own risk. This ROM is not stable yet!
FILES NEEDED
- ROOT -
http://4shared.com/mobile/efYolQsrce/tr_2.html
- Recovery Flash Tool - http://www.4shared.com/mobile/Svw_WpXTba/recovery.html
- RECOVERY - https://dev.androidfilehost.com/?fid=24052804347779407
- ROM - https://sourceforge.net/projects/ng...e-14.1-20170424-UNOFFICIAL-ef50l.zip/download
- SU/ROOT - SuperSU/Magisk/LOS Root
- GApps - opengapps.org - Choose ARM - Choose GApps type Pico/Nano (recommended)
Steps:
Step One - "Preparing Files"
- Extract .zip file and copy/cut recovery.img to sdcard
- Copy/cut all downloaded .apk and .zip files to sdcard as well
Step Two - "Rooting"
- Install tr_2.apk
- Tap make in ra1n
- Wait for few seconds
- A pop-up will show up that root has been installed
Step Three - "Flashing Recovery"
- Install recovery.apk
- Grant Root Access
- Wait for few seconds
- A pop-up will show up that you need to backup your current stock recovery. Make a backup
- Tap flash recovery
- Tap other from storage
- Locate where you place recovery.img that you extracted
- Tap recovery.img
- Wait for few seconds
- A pop-up will show up that you need to reboot/restart your phone to complete the process
- Tap reboot/restart
Step Four A - "Installing Nougat for Newbies"
- Power off the phone
- Wait 5 seconds
- Hold +Volume + -Volume + Power at the same time
- Use +Volume and -Volume to navigate through the menu
- Choose RECOVERY
- Wait for few seconds
- Tap Wipe
- Slide Factory Reset
- Wait for few seconds
- Tap Back
- Tap Advance Option
- Tap Dalvik Cache, Cache, Data, System and Internal Storage
- Swipe to Confirm
- Wait for few seconds
- Tap Back
- Head to the Menu
- Tap Install
- Locate external_sd
- Tap external_sd
- Tap the ROM, SU/ROOT (optional) and GApps (the add button is in the top right corner)
- Swipe to Confirm
- Wait for few seconds
- Tap Wipe dalvik/cache
- Wait for few seconds
- Tap Reboot
- Wait 'till installation is finish (est. time - 5-10 minutes)
- Enjoy
Step Four B - "Installing Nougat for Experienced"
- Power off the phone
- Wait 5 seconds
- Hold +Volume + -Volume + Power at the same time
- Use +Volume and -Volume to navigate through the menu
- Choose RECOVERY
- Wait for few seconds
- Do a Factory Reset first
- Wipe Dalvik Cache, Cache, Data, System and Internal Storage
- Install ROM
- Install SU/ROOT (optional)
- Install GApps
- Tap Wipe dalvik/cache (necessary) after successful flashing
- Wait 5-10 minutes
- Enjoy
Not Working
- Bluetooth
- Data
- Others?
Credits:
OpenGApps
Magisk
SuperSU
LineageOS
ROM Developer:
Nguyenhung9x
XDA Profile - https://forum.xda-developers.com/member.php?u=7770592
Donate to the developer for continue support to this device.
Bluetooth not working!!!
ma'am/sir i appreciate your work, but the bluetooth sir is not working... plsss kindly fix asap hehe thank you ma'am/sir for your hard work.
I dont have an Micro SD. How should I do?? Can I do without formating Internal Storage??
I bought an SD, from sandisk but couldn't download that TWRP but had the one which has same version and same dev.(Have it in HDD,Labeled for A850*)So, i did those steps and the rom would't finish installing even in 2 hours. What Should I Do?? CM and RR roms only took five minutes....
I managed to recover my dad's old [this phone] that initially ran Kitkat 4.4. Well, it worked, though sometimes it may cause some issues which is from the hardware side, or it is, or something else. Thanks.
P/S: well I found an issue for it recently though, after a while of using there's chance of your device suddenly gets bootlooping but it's like that it could get to the lock screen, but suddenly go back to the boot animation, and then it recurs the phenomenom. Not sure if the error comes from device side or the ROM being unstable.
Edit: perhaps my battery is the problem. Sometimes it suddenly shut the phone off while there're still 50% left. But at least I think so.
barnacl437 said:
P/S: well I found an issue for it recently though, after a while of using there's chance of your device suddenly gets bootlooping but it's like that it could get to the lock screen, but suddenly go back to the boot animation, and then it recurs the phenomenom. Not sure if the error comes from device side or the ROM being unstable.
Edit: perhaps my battery is the problem. Sometimes it suddenly shut the phone off while there're still 50% left. But at least I think so.
Click to expand...
Click to collapse
That's a pretty common issue, it might as well be fixable though.
Remove your battery and try cleaning the contact between the battery and the device using an eraser.
Related
Crazbanditz and ImOsmanFans
Presents to you
OsmanFansRom V2 DXKP9!!!
Screenshots coming soon!!
FEATURES
Rooted
Busybox
Deodexed
Zipalligned
Ext 4 Filesystem
14 Notification Bar Toggles
1% Battery Mod
Old CRT Effect
Vanilla Lock Screen
Simple Design
Fast boot up time
Longer battery life
Tun.Ko module
Fast response
Wifi working
Xperia Arc Launcher
TW Launcher 4
Overall little or no bugs
Juwe11's Ramscript
Pre-installed Apps
WhatsApp
Credits
ImOsmanFans
blaqkarma
jooode
Juwe11
Table of Contents
Installation Guide
Downloads
Change Log
FAQ
Upcoming
Enjoy the ROM!!!
Installation Guide
1. Flash DXKF1 (download & extract files first) using ODIN:
- Open ODIN check Re-Partition, Auto Reboot, F.Reset Time
- Click PIT button choose: latona_20110114.pit
- Shutdown phone
- Simultaneously click and hold Vol.Down+Home+Power buttons (Download Mode)
- Connect phone to PC via Data Cable. (make sure ID:COM box in Odin highlighted yellow)
- Click ODIN's Start button
- Wait for "PASS!" to appear on top left corner of ODIN
- After PASS! click reset button (Re-Partition should be unchecked)
- Click PDA button and choose: I9003DXKF1-REV08-ALL-low-CL1020446.tar.md5
- Click PHONE button and choose: MODEM_I9003DXKB2_REV_00_CL863799.tar.md5
- Click CSC button and choose: GT-I9003-CSC-MULTI-OLBKB2.tar.md5
- Click Start and wait for "PASS!"
2. After reboot do not setup just shutdown and enter Download Mode.
3. Flash DXKP9 as PDA through ODIN:
- Open ODIN
- Click PDA button and choose: I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.md5
- Conect phone to PC via Data Cable (make sure ID:COM box in Odin highlighted yellow)
- Click Start button and wait for "PASS!"
4. After reboot, shutdown
5. Simultaneously click and hold Vol.Up+Home+Power buttons to enter Recovery Mode
6. Using volume buttons choose "wipe cache partition" and press Home button
7. Choose "wipe data/factory reset" and press Home button
8. Choose "reboot system now" and press Home button to Reboot the phone
9. Complete phone setup dialogue, and test everything: Wifi,2G,3G,Mail Notification,GPS.
10. Flash CF-Root w/ext4 support for DXKP9 HERE!!
2. Copy the custom ROM into your external sd card.
3. Boot into your Clockwork Mod Recovery
4. Choose install zip from sdcard ==》 choose zip from sdcard ==》Then select OsmanFansRom_vx.x.zip to install. (Notice that if you want to select anything, please use MENU button but not HOME button!)
6. After finish installation, reboot into recovery and wipe cache partition,DALVIK cache
5. After finish wiping, reboot and you will now have the OsmanFansRom installed.
6. Calibrate Battery.
7. DONE!!
Downloads
OsmanFansRom V1.5
Change Log
26.11.11 - TESTING V2
25.11.11 - UPLOADED AND POSTED OSMANFANSROM V1.5!!
FAQ
None as of now
Upcoming
- Screenshots(Please provide them for me. THANKS!!)
I can't fine the download line.Who can help me.
waiting..........
still waiting...
Three hours past
any change log？
Be patient brother
just hope this rom stable, smooth and free of bugs..like XXKB3
and also battery performance.
This was my favorite ROM...!! I miss this cRom...
6 hours past.....
five hours past
Uploading seven hours?
goyczh said:
Uploading seven hours?
Click to expand...
Click to collapse
Sorry guys I have a terribly slow internet connection for now as house is renovation another 2 more hours.
crazbanditz said:
Sorry guys I have a terribly slow internet connection for now as house is renovation another 2 more hours.
Click to expand...
Click to collapse
Its ok brother..take your time.we have plenty of time to wait..Better then nothing.
Longest upload ever
Upload completed now updating post!!
HI all,
I saw the need of reposting my post #282 (main ZOPO ZP999 thread) for people who want to root, flash recovery or for some reason lost control of their precious Zopo and want to regain it
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have noticed that the link sometimes is unavailable : Mod edit sales link removed
Therefore i post it here again : also THANKS TO JASPER===JG77 and Ghost45
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is what you have to do:
- Preferably use a Windows 7 (x32 or x64) system
- Download and install drivers http://www.4shared.com/rar/f0a9TeP8ba/Zopo_ZP999-3X_32-64bit.html
- Download the firmware and extract it (a stock ROM) http://www.zopomobileshop.com/content/9-download-zopo-mobile-latest-rom
- Download a recovery (I used CarlivTouch) http://www.4shared.com/file/xKa5nYyuce/recovery_CarlivTouch_30_ZP999.html
- Download SP Flashtool and extract http://www.4shared.com/zip/FlMUfELsba/SP_Flash_Tool_exe_Windows_v514.html
- Download SuperSu https://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
- Boot your phone and connect to your PC and copy the SuperSu zip to your SD (I used a micro SDcard and not phone storage)
- Disconnect and shutdown the phone
- Start SP Flashtool (as administrator)
- Click 'Scatter-Loading' and select the 'MT6595_Android_Scatter.txt' from the downloaded Firmware! Picture 1
- Remove all selections except (!) recovery
- Click on the location of the recovery
- Select the custom downloaded recovery file (in my case recovery_CarlivTouch_30_ZP999.img) Picture 2
- Remove the battery from your phone (DON'T CONNECT YET) (battery pull :not necessary i think...but does not harm )
- Make sure you see 'Download Only' in SP Flashtool and click the 'Download' button
- Now connect your phone to your computer and leave the battery out of it!
- Wait till you see a green sign Picture 3
- Disconnect your phone but the battery back in but (!) DON'T BOOT
- Connect the phone to a charger and wait till it shows the battery level
- Press the buttons Volume-Up and Power and hold them
- After the first Zopo screen release Power (I kept holding Volume-Up)
- If all is well you now see the custom recovery! (you can let go of the volume button ) (if it didn't work the first time because of wrong timing, just shut down again and retry)
- Immediately install the SuperSU ZIP file (install zip-> Choose zip from /storgage/sdcard1)
- When done choose reboot and if you get questions about fixing to keep the custom recovery and fix root, say YES
- Let it boot into Android and Check ROOT with f.e. rootchecker
- Go to Google Play Store and install Busybox (not necessary)
- Start Busybox and make sure you give it Root right (not necessary)
- Press Install, if it fails the first time do it a second time. You should see an OK message if all is well. (not necessary)
- Reboot your phone, and PRESTO, your phone is rooted.
If you would install MobileUncle Tools from Google Play Store you can see you are rooted. (Here you allways can go in recovery without any problems)
Thanksbutton appreciated
@raystef66,
New Zopo Official have taken new Forum of Zopomobileshop original first Zopo Forum.
So New threads are always here in Xda ...look for them.
VIBE 1.5 Official Rom For S850
For phones with CN (Chinese) Firmware .
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP For CN .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all -> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
.
For phones with ROW Firmware
1.1 - Get Root, using iRoot -> put Supersu -> check the availability Root rights.
1.2 - Put ® Mobileuncle the MTK the Tools
1.3 - Download the TWRP for ROW .
Install TWRP:
Rename in recovery.img and throw in the root of the memory on the phone. In Mobileuncle Tools select Recovery Update and update.
1.4 - Check TWRP. Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.) Just do Backup system-> Press Backup-> mark all punkty-> Swipe to Back Up. How to Backup done reboot, we connect your phone to the PC and store your Backup. (TWRP Save the folder on the PC).
2 - Download the firmware to your phone.
3 - Turn off the phone -> Boot into TWRP (Push at the same time the volume +/- and ON button.)
4 - Press Wipe-> Advanced Wipe-> Dalvik Cache, Cache, Data, System (Internal Storage Do not touch) -.> Swipe to Wipe.
5 - Reboot-> Recovery
6 - Select Install and specify the file with the firmware.
7 - After the installation is complete, click Reboot system.
The first boot last a long time (about 5 minutes)
Click to expand...
Click to collapse
The CN - DOWNLOAD (Full version)
The CN - DOWNLOAD ( Lite version)
The CN - DOWNLOAD (deodexed Lite version)
The ROW - DOWNLOAD (Lite version)
lite version-removed bloatware,some unnecessary apps,no dolby
.
Stock Rom running on android 4.2.2, must have a root.
What does not work
Vpn does not work.
When the headset is connected (headphones) with an incoming call, if you pick up the phone, the network drops for about 30 seconds, before removing the headset. In vibration mode.
Even small bugs are possible.
It is very important to first back up NVRAM using MobileUncleTools
Installation
1) Installing custom recovery TWRP:
- Install the application Mobileuncle_MTK_Tools.
- The file recovery.img from the folder TWRP-3.0.2-0 is transferred to the root of the memory card.
- Start MobileUncle Tools, give the application Root rights, select Recovery Update, select our file recovery.img
- After completion we reboot Into Recovery Mode, we must have TWRP-3.0.2-0
2) Installing the ROM:
- In TWRP choose Wipe - Advanced Wipe - mark System, Data, Dalvik cache, Cache - do Swipe to Wipe. After the successful completion, go to the main menu.
- Select Reboot - Recovery. Reboot the recovery.
- In the main menu select Install - select our firmware file cm13_S898t.zip - do Swipe to confirm Flash.
After the successful completion, do a Cleanup of cache / dalvik and the Reboot System.
- We are waiting for the successful completion of downloading and setting ROM cm13.
Gaps are built in the archive with firmware.
Download
- Mobileuncle_MTK_Tools.apk - Download
- Recovery TWRP-3.0.2-0_S898t - Download
- ROM cm13_S898t.zip - Download
Reserved.
Many thanks @toy_story. Such users neeed a forum.. :good:
Hi everybody, I'm new here and I hope my question does not sound too stupid . My grandson brought me his Galaxy tab 2 GT-P5113 and it is a rooted device . It has android version 4.2.2 installed and it will not update because the device has been modified appears . He does not have the original data cable just a cable that will charge . Here is the question. Do I need to hook up to a PC to install Beanstalk rom or can it be installed off of the SD card ? Any help and install procedure would be greatly appreciated . Thank you .
As long as it has a custom recovery installed such as TWRP you can download and flash any rom that you like without a pc
twfs said:
As long as it has a custom recovery installed such as TWRP you can download and flash any rom that you like without a pc
Click to expand...
Click to collapse
Can you explain ? Thank you.
jtag2014 said:
Can you explain ? Thank you.
Click to expand...
Click to collapse
Search for twrp recovery and download and install the correct version for your device (if it's not already installed). Then install the rom using twrp (no pc needed for this).
Greetings,
THIS IS A LONG(will take upto 1 hour of your time) BUT EASY PROCESS. SO DON'T WORRY.
After reading your question I understood that you want to install beanstalk ROM on your device.
I suggest you NOT to install beanstalk as it is discontinued and not updated ROM.
To install the ROM you should have a custom recovery.
I will proceed you as following :
1. Installing a custom recovery.
- Download Flashify from play store.
- Download this recovery from here :- https://androidfilehost.com/?fid=962021903579495495
- Open Flashify and open the flash(or install tab), it must be opened by default anyways.
- Select 'Flash Custom Recovery' and navigate to the file downloaded.
- After you click install, you device will reboot.
- Now you have a custom recovery installed.
2. Downloading the ROM and correct gapps
I suggest you to install this ROM(as it is updated and supported at the moment) :-
- Download the ROM. :- https://androidfilehost.com/?fid=746010030569950580
- Open this website :- https://opengapps.org
- Select ARM, then 7.1, then Pico and download the GApps(google apps, play store and all).
3. Flashing
- Power off your device(make sure you have atleast 30% battery).
- Press Volume Up + Power button until your device vibrates.
- If you get some sort of message, just click "Keep read only".
- Click wipe.
- Click advanced.
- Select : Data, Dalvik/ART, System and cache.
- Swipe the slider to right and wait until you see " Done in the dialog box"
- Press the home button
- Click Install
- Locate the ROM first and select it and swipe the slide towards right again.
- Once you see "script succeeded result = 1.000000" press home button.
- Click install again.
- Locate to the GApps.
- Install it just as you did with ROM above.
- After installation click home button.
- Click wipe and select : Cache, Data and Dalvik/ART. DO NOT CLICK SYSTEM.
- Click the home button.
- Click reboot.
- Click system.
- Done!!
IMPORTANT :- The first boot will take around 5-15 minutes, this is normal. After your device boots, please connect it to your charger and keep it aside for 5 minutes and then set it up.
Thank you, if you have any problem or doubt just write me back.
I have downloaded everything you suggested and will try and install everything later . Thank you again for the instructions .