Database Info

adrenaline shot HELP DESK PLEASEEE

hello guys new in here....so sorry.....
i have i new 2.3.5 xxkpg samsung galaxy s plus phone...rooted.....which i wish to instal adrenaline shot universal mode v13....or v12?secondly can anyone give me a detailed how to and what do i need to install adrenaline shot?and last one is it going to loose all the programs i installed or the settings or the sd card files???
thanks guys in advance i am waiting for your help...
thanks a lot

http://forum.xda-developers.com/showthread.php?t=1331164

avq said:
http://forum.xda-developers.com/showthread.php?t=1331164
Click to expand...
Click to collapse
thanks about this link but i have already seen that....i ask this thread only because i want it more simply....i was very confused after reading your threading...
thanks thow

dl odin, install cwm then send adrenaline shot to your device, turn it on in recovery mode, then install shot.
"
3. Download FeaMod Recovery v.1.2.
4. Open Odin again and select the AriesVE.ops as the OPS file. Tick the one package option under OPTION. The select the FeaMod file as the One Package file. Flash it! After 10 to 15 secs your device will reboot into your system.
6. Copy the Universal Adrenaline v.13 zip file (download it from here: http://forum.xda-developers.com/show....php?t=1236779) to your internal or external sdcard.
5. Shut your device down and reboot into FeaMod Recovery v.1.2. by holding the Volume up and Power Button simultaneously until the Samsung Logo appears, hold it for 2,3 seconds longer and release both buttons. Welcome to FeaMod zone :-D
6. not important.
7. Go to mount and storage -> mount /system
8. Go to advanced and select fix permissions.
9. Go to install zip from sdcard and select your fresh copy of adrenaline shot v. 13.
10. Reboot into system."
it cannot be simpler. 3,4 minutes and its done.
and nah, you wont lose your data if you do everything correctly.

avq said:
dl odin, install cwm then send adrenaline shot to your device, turn it on in recovery mode, then install shot.
"
3. Download FeaMod Recovery v.1.2.
4. Open Odin again and select the AriesVE.ops as the OPS file. Tick the one package option under OPTION. The select the FeaMod file as the One Package file. Flash it! After 10 to 15 secs your device will reboot into your system.
6. Copy the Universal Adrenaline v.13 zip file (download it from here: http://forum.xda-developers.com/show....php?t=1236779) to your internal or external sdcard.
5. Shut your device down and reboot into FeaMod Recovery v.1.2. by holding the Volume up and Power Button simultaneously until the Samsung Logo appears, hold it for 2,3 seconds longer and release both buttons. Welcome to FeaMod zone :-D
6. not important.
7. Go to mount and storage -> mount /system
8. Go to advanced and select fix permissions.
9. Go to install zip from sdcard and select your fresh copy of adrenaline shot v. 13.
10. Reboot into system."
it cannot be simpler. 3,4 minutes and its done.
and nah, you wont lose your data if you do everything correctly.
Click to expand...
Click to collapse
sorry if i am stupid but i will not loose root or everything else?
thanks for your patience

nope, root and data will be untouched.

you were right trully fast and the phone is very smooth and smuch memory and stable...thanks....if you want to remove it how can you remove it?

reflash current rom or if you have a backup( point 6 was skipped though ) then load it by cwm.

[GT-P6200] Official ICS 4.0.4 firmware (Nov 2012) [STOCK/UNROOTED]

Just saw the heat on the GT-P6210 UK firmware release and checked on Samfirmware.
Flashed this using Mobile ODIN directly OVER the KL3 deodexed firmware, no major issues so far (unable to set voicemail number).
All settings/prefs/apps preserved
Download link from Hotfile, feel free to mirror elsewhere
http://www.hotfile.com/dl/162811167/9e67b52/P6200XXLQ1_P6200OXALQ1_ATO.zip.html
Beware, extracted, this file is nearly 850Mb in size
Also, thanks to anyone who roots this!
Aaron.
P.S. Screenshot
https://plus.google.com/u/0/111032879558038139743/posts/aD54hVuaVBz
-----
** UPDATE **
Brand new UK P6200 firmware available dated November 2012
PDA: P6200XXLQ7
CSC: P6200XEULP1
http://www.hotfile.com/dl/179423658/bf830d8/P6200XXLQ7_P6200XEULP1_XEU.zip.html
Same as previous. I flashed this directly over my previous firmware using Mobile Odin Pro. I had to flash SuperSU binaries afterwards to gain proper root access.

Root is easy for this firmware!
When flashing via Mobile Odin, clear the flash for recovery image (i.e. do not flash recovery)
Then flash SuperSU afterwards via recovery
http://download.chainfire.eu/204/SuperSU/CWM-SuperSU-v0.94.zip

how much it take time, i flash with mobile odin about 20 minute ago and my tab still on samsung logo !

It should take up to 7 minutes to complete the process, including boot up.

ali_ge said:
how much it take time, i flash with mobile odin about 20 minute ago and my tab still on samsung logo !
Click to expand...
Click to collapse
Took mine around 5 minutes to flash, then another few mins to get to the "upgrading screen" (which is simply android creating the relevant dexes).

acolwill said:
Took mine around 5 minutes to flash, then another few mins to get to the "upgrading screen" (which is simply android creating the relevant dexes).
Click to expand...
Click to collapse
hi can i just flash this with my stock p6200?
stock baseband kernel etc.

Justinhopaolo said:
hi can i just flash this with my stock p6200?
stock baseband kernel etc.
Click to expand...
Click to collapse
Should be no issues. I *would* flash the CWM recovery tho.

Uhm, for some strange reason none of my 2 PCs is able to see P6200 while in recovery mode. Everything is working fine if I connect my GS3 to those PCs. Any clue?

Try using Mobile Odin ;-)
It has worked pretty well for me.
Edit : I had a stock ROM / RECOVERY / ... Only rooted my device.

i'm mirroring the ICS Austria Firmware on media fire. Feel free to download.
part1 - part2 - part3

can i install roms without using an sd card?

Justinhopaolo said:
can i install roms without using an sd card?
Click to expand...
Click to collapse
yes.. but use odin.

motosuki said:
yes.. but use odin.
Click to expand...
Click to collapse
In another thread you say no. What's your final answer
Sent from my GT-P6200 using xda premium

Justinhopaolo said:
In another thread you say no. What's your final answer
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
you need to use pc + odin to flash this firmware. it doesn't require external sdcard. it is different when you flashing custom ROM, you need external sdcard to put the zip file.

motosuki said:
you need to use pc + odin to flash this firmware. it doesn't require external sdcard. it is different when you flashing custom ROM, you need external sdcard to put the zip file.
Click to expand...
Click to collapse
Hi I'm sorry, I hope its not too much of a drag for you. Bit can you give me steps?
I already have the mobile Odin.
Sent from my GT-P6200 using xda premium

Justinhopaolo said:
Hi I'm sorry, I hope its not too much of a drag for you. Bit can you give me steps?
I already have the mobile Odin.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
1. download samsung kies to get the correct driver for gt-p6200
2. download odin3 v.1.85
3. download Stock Firmware Austria - P6200XXLQ1_P6200OXALQ1_ATO.zip
4. install Kies
5. extract Odin3-v1.85.zip
6. extract P6200XXLQ1_P6200OXALQ1_ATO.zip until you get file P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
7. turn off your tablet
8. enter download mode (press volume up button + power button about 5 seconds)
9. plug the usb cable to your pc and your tablet
10. run Odin3 v1.85.exe
11. check if pc recognize your tablet by seeing ID:COM turn yellow and "Added!!" message in the message box lower left odin window.
12. klik PDA button and put P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
13. make sure to uncheck re-partition
14. click start
15. odin processing takes about 5 minutes, wait patiently.
16. if there's a "SUCCEED" in the message box, your tablet will restart
17. wait about 10 minutes, you should get your ICS boot to system
if it's not....
18. if your tablet didn't boot, you need to wipe cache / factory reset in the recovery mode
19. turn off your tablet.
20. press volume up + power button about 5 seconds.
21. do wipe cache / factory reset
22. reboot to system
23. it should be booting to system
if it's not...
contact nearest samsung service center

motosuki said:
1. download samsung kies to get the correct driver for gt-p6200
2. download odin3 v.1.85
3. download Stock Firmware Austria - P6200XXLQ1_P6200OXALQ1_ATO.zip
4. install Kies
5. extract Odin3-v1.85.zip
6. extract P6200XXLQ1_P6200OXALQ1_ATO.zip until you get file P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
7. turn off your tablet
8. enter download mode (press volume up button + power button about 5 seconds)
9. plug the usb cable to your pc and your tablet
10. run Odin3 v1.85.exe
11. check if pc recognize your tablet by seeing ID:COM turn yellow and "Added!!" message in the message box lower left odin window.
12. klik PDA button and put P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
13. make sure to uncheck re-partition
14. click start
15. odin processing takes about 5 minutes, wait patiently.
16. if there's a "SUCCEED" in the message box, your tablet will restart
17. wait about 10 minutes, you should get your ICS boot to system
if it's not....
18. if your tablet didn't boot, you need to wipe cache / factory reset in the recovery mode
19. turn off your tablet.
20. press volume up + power button about 5 seconds.
21. do wipe cache / factory reset
22. reboot to system
23. it should be booting to system
if it's not...
contact nearest samsung service center
Click to expand...
Click to collapse
is this the method if i want to flash other roms, like cm9?

Justinhopaolo said:
is this the method if i want to flash other roms, like cm9?
Click to expand...
Click to collapse
you need to use CWM recovery.
1. download CWM recovery
2. copy CWM file into your external sdcard
3. turn off your tablet
4. enter recovery mode, press volume up + power button about 5 minutes
5. use volume button to navigate and power button to choose
6. choose "apply update from external storage"
7. find p6200_CWMR_20111214.zip
8. push power button to choose, and wait until instalation finished
9. your tablet will reboot
to install CM9
1. download custom rom you want to install
2. put it in your external sdcard
3. turn off your tablet
4. enter recovery mode, press volume up + power button about 5 minutes
5. use volume button to navigate and power button to choose
6. choose "install zip from sdcard" and "choose zip from internal sdcard"
7. find the custom rom zip file
8. push power button to choose, and wait until instalation finished
9. choose go back until you find wipe data / factory reset
10. choose yes
11. choose wipe cache partition
12. choose yes
13. reboot system now
that should do it... and make sure you use the right custom ROM for your tablet model.

whenever ichoose apply update from external. it say no such directory or file etc..
howcome?

Justinhopaolo said:
whenever ichoose apply update from external. it say no such directory or file etc..
howcome?
Click to expand...
Click to collapse
did you succeed installing CWM? or you still trying to install CWM?
i make some correction in the tutorial... please read again.

[q] how to root phone??????

my phones gotten much slower than it used to be...the most adventurous ive gotten with my phone was to update it...through kies that is...
so googling my way i got to xda forums...and on the registry i realised that im a total noob!
so i was wondering if anyone here could help me with a step by step procedure of how to root my gti9003 and then help me out with custom ROMs
Dont know if its relevant but the following are my present phone statistics
MODEL:GT-I9003
FIRMWARE: 2.3.6
BASEBAND: I9003DDLE1
KERNEL: 2.6.35.7-CL1153545 [email protected]#1
BUILD NUMBER: GINGERBREAD.DDLF2
ive read a lot on superoneclick and stuff but im not sure if thatll work for my phone.
Thanks

1. flash ddlf2 firmware from her http://www.hotfile.com/dl/161660941/...2_INU.zip.html and password for zip is sampro.pl OR samfirmware
2. then flash cf-root from here http://www.mediafire.com/?0ndawa4g0s851h4 then go to recovery mode by pressing volume up,home button and power button
3. Wipe Data / Factory Reset.
sent from Samsung galaxy S i9003 Remics JB v3

@karanmirchandani96
really appreciate the help..but as i said...im a noob...i couldnt understand much of your reply :/

Fir download the file then
Note: Before I proceed with this part, Samsung has made it VERY EASY for new users to flash compared to the older ones, Unlike the previous version's that require you to flash it twice or such, or separate files, Their newer releases will always be in this format. With one PDA.md5 file. Unfortunately I cannot keep updating this thread with every region as the flashing methods are exactly the same as follows.
1. Firstly, Download the required firmware from here
2. Run Odin3 v3.04 at the bottom of the page.
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Extract the contents from the zip, You should have a .dll and a 200-300 MB PDA file.
6. At this point you should see Re-Partition, Auto Reboot and F. Reset Time unchecked.
7. Click PDA button and select the only PDA file in the zip folder (Here you should not touch any of the Re-Partition/F.Reset options as the newer Odin automatically selects it for you, how conveinient!)
8. Click Start button to flash these files to phone.
9. Do not touch anything till you see PASS on the program window.
10. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should be there. (There should not be any "Unavailable")
11. Factory reset and enjoy
Note: XXKPQ can only be flashed with help from it's supporting predecessor XXKPE like the XXKPN/XXKPH/XXKPM series, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot.
Note: For those of you receiving WiFi drop issues, Assign a static IP using
Static IP [Download Here], hit the advanced tab and let it auto configure. Credit to [thatguyonfacebookiforgot]
1. Firstly, Download the 2.3.6 firmware from Przekret's thread
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPQ
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPQ_I9003XXKPQ_I9003SERKPQ_HOME.tar.md5 as PDA
16. Click on Start to flash XXKPQ PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPQ
18. Factory reset and enjoy
Note: XXKPN can only be flashed with help from it's supporting predecessor XXKPE like the XXKPH/XXKPM series, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot. This firmware is to fix the issues that pertained and caused some WiFi issues for other's
1. Firstly, Download the 2.3.5 firmware from Przekret's thread
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPN
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPN_I9003XXKPN_I9003SERKPN_HOME.tar.md5 as PDA
16. Click on Start to flash XXKPN PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPN
18. Factory reset and enjoy
Note: XXKPM can only be flashed with help from it's supporting predecessor XXKPE like the XXKPH series, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot.
1. Firstly, Download the 2.3.5 firmware from Przekret's thread
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPM
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPM_I9003XXKPM_I9003SERKPM_HOME.tar.md5 as PDA
16. Click on Start to flash XXKPM PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPM
18. Factory reset and enjoy
From Custom ROM's [Must be GINGERBREAD, Not Froyo, I am not responsible if your phone ends in a bootloop from ignorance]:
1. Just flash I9003XXKPM_I9003XXKPM_I9003SERKPM_HOME.tar.md5 in PDA as usual.
2. The phone will end up in a bootloop due to ext4 conversion, Proceed to step 3.
3. Flash Skin's CFRoot in respective PDA.
4. Boot into Custom Recovery via 3 Button Combo.
5. Select option's Wipe Cache and Factory Reset
6. Voila, Enjoy your new easy flashable method.
Note: XXKPH can only be flashed with help from it's supporting predecessor XXKPE, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot.
1. Firstly, Download the link from spacebar's XXKPH Feedback thread.
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPH
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar as PDA
16. Click on Start to flash XXKPH PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPH
18. Factory reset and enjoy
1. Firstly, Download the link from Krazzy's stock firmware thread.
2. Run Odin3 v1.83
3. Check Re-Partition, Auto Reboot and F. Reset Time.
4. Click PIT button and select this file: latona_20110114.pit
5. Set it to download mode : Press Volume down + OK first, then hold Power button.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir]
9. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
11. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
13: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!]
14. Click Start button to flash these files to phone.
15. Do not touch anything till you see PASS on the program window.
16. Factory reset
17. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
1. Make all your backups using TB. Don't forget to move the TB folder to Ext_SD or PC after backing up.
2. Factory reset phone using manual code. (*2767*3855#)
3. Get into recovery mode and wipe all.
4. Now flash the new ROM as usual (latona and then the remaining 4 files.) Be sure not to make any lame errors here.
5. Factory reset again using manual code.
6. Now check to see if the power button functions and the phone reboots when you ask so. (It should work.)
7. Check camera. If you have a black screen, its okay.
8. Factory reset again using manual code.
9. Redo flash procedure again.
10. Factory reset again.
11. Check power button issue and camera. Both should be totally fine.
12. Press power button to lock and leave device for 10 mins. Now, press power button to check if the device wakes up as normal. It should. If you want to avoid the device being woken up by calls or texts or other notifications, just put it into flight mode and turn off Wi-Fi.
13. Root using SuperOneClick. It will show up Kernel Panic error in the end, but its no problem.
14. Just pull battery after that and restart phone. You should see SuperUser installed and working. Upgrade Busybox to 1.18.4 by Stericson.
15. Now install TB and go about your restoring business. DO NOT restore any system apps. Just restore User Apps and data.
16. If you didn't **** up any of the above, you should be up and running 2.3.4 without any issues (yet!).
thanks to spacebar2011 for his version.
1. Firstly, Download the link from Krazzy's stock firmware thread. [Apprently it's been proven recently its 2.3.4 GingerBread and not 2.3.3 ] [Link Below]
2. Run Odin3 v1.83
3. Check Re-Partition, Auto Reboot and F. Reset Time.
4. Click PIT button and select this file: latona_20110114.pit
5. Set it to download mode : Press Volume down + OK first, then hold Power button.
6. Connect USB cable and the program will detect the phone's Com number.
7. Click Start button to download the PIT file to phone.
8. After it is Done Click on Reset button [Partition box should be unchecked automatically - Thanks to jaskir]
9. Click PDA button and select this file: CODE_I9003XXKP7_CL280937_REV08_eng_mid_ship.tar
10. Click PHONE button and select this file: MODEM_I9003XXKP7_REV_00_CL1021949.tar
11. Click BOOTLOADER button and select this file: APBOOT_I9003XXKP7_CL280937_REV08_eng_mid_ship
12. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKP7.tar
13: You should unplug usb cable, remove battery, insert battery and bring it back to download mode. I have never been able to bring it to download mode with usb plugged in. [Thanks to jaskir for this suggestion to make it clear to new users!]
14. Click Start button to flash these files to phone.
15. Do not touch anything till you see PASS on the program window.
16. Factory reset
sent from Samsung galaxy S i9003 Remics JB v3

[GUIDE] Installing XPOSED on Galaxy S4 SGH-1337M (2017) (WITH PICTURES)

THIS GUIDE IS ONLY FOR GALAXY S4 SGH-1337M
Guide made on 2017-03-12
I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU DO TO YOUR PHONE!
PERFORMING THIS WILL MAKE YOUR WARRANTY GO AWAY!
LEAVE A THANKS IF IT WORKS
This guide is split up into four parts meaning that if you just want to root your phone or just want to restore to stock then you can YOU CAN NOT INSTALL XPOSED WITHOUT ROOTING AND GETTING STOCK FIRST!
Welcome to my guide on how to install XPOSED on the Samsung Galaxy S4 (SGH-1337M) this guide is strictly for the SGH-1337M the reason I made this was because I spent a lot of hours trying to put parts of threads together since no one had specifically made a guide that was simple and noob friendly for installing XPOSED. Another reason is some people feel uncomfortable following guides made for the SGH-1337 mainly because it is different from the SGH-1337M. Another reason was I found no updated 2016/2017 guides for it. Follow every part step by step or you may risk losing your phone.
Also make sure you backup anything that isn't synced with Google that you want to keep, photos, music, contacts. This will delete all data on the phone.
This guide will be split up into four parts:
-Stock
-Root
-ROM that is needed
-Installing XPOSED
Requirements:
-A PC
-Internet
-Samsung Galaxy S4 SGH-1337M
-USB Cable
-SD Card with at least three free GB on it.
Stock Firmware
BEFORE YOU BEGIN (IMPORTANT)
1. Power off device
2. Boot into the stock recovery by holding Power Button+Home Button+Volume Up Button when you see the Galaxy S4 logo then let go of Power Button but keep holding Home and Volume Up
3. Wipe Data/Factory Reset
4. Wipe Cache Partition
5. Power Down
Now you may begin
1. Download the latest stock firmware from sammobile for your device from make sure it is for 5.0.1:
-https://www.sammobile.com/firmwares/database/SGH-I337M/
2. Extract the .zip after you finish downloading
3. Download ODIN v.3.12.3
-Attachment at bottom of thread.
4. Extract the .zip to get the ODIN program.
5. Turn your device off.
6. Boot into download mode by holding Power Button+Volume Down Button
7. When it gives warning press the Volume Up Button
8. Connect device to PC using USB cable.
9. Run ODIN as administrator
10. Your ODIN screen should look like this now:
-http://prntscr.com/ej6hrl
Note: Where it says [0:COM8] The 8 can be any number.
11. Click AP and find the .md5 file you extracted from the stock firmware .zip from earlier.
Note: It is normal for ODIN to freeze while checking the file don't panic and don't close out.
12. On the left hand side where it says options copy down these settings
-http://prntscr.com/ej6ivi
13. When you are done all that it should look like this:
-http://prntscr.com/ej6jmz
Note: My .md5 file or binary size won't look exactly like yours don't panic.
14. Click start
15. It will take a while just be patient and wait, mine took about 10-15 minutes yours might take longer. It should look like this when done and it should reboot automatically:
-http://prntscr.com/ej6nq9
Note: First boot may take a while be patient.
16. Quickly go through setup it doesn't matter what you choose because this isn't the final product.
17. As soon as you finish setup head over to Settings.
18.Go to "More" and click Security
19. Check Unknown Sources
20. Go back to "More"
21. Go to About Device
22. Tap the Build Number until it says developer options enabled.
23. Go back to "More"
24. Go to Developer options
25. Check USB Debugging
26. Turn phone off.
Rooting The Device
1. Download CF-Auto-Root.zip
-http://download.chainfire.eu/327/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltecan-jfltevl-sghi337m.zip
2. Extract the .zip
3. Boot into Download Mode.
4. Connect Device to PC
5. Run ODIN as administrator
6. Your ODIN screen should look like this now:
-http://prntscr.com/ej6hrl
Note: Where it says [0:COM8] The 8 can be any number.
7. Click AP and click the CF-Auto-Root .md5 file that you downloaded
8. On the left hand side where it says options copy down these settings
-http://prntscr.com/ej6ivi
9. When you are done all that it should look like this:
-http://prntscr.com/ej779o
10. Click Start
11. It should look like this when done and it should reboot automatically:
-http://prntscr.com/ej77ok
Note: First boot may take a while be patient.
12. When it starts go to Play Store sign in and download Root Checker by joeykrim
13. Open the app and make sure the phone is rooted
Note: When you click "Check for root" it will ask for SuperUser permission you have 15 seconds to click grant otheriwse it will show wrong results.
14. If it isn't repeat this process again
15. Turn phone off.
Custom ROM that is needed.
General Information:
-Basically XPOSED requires a deodexed firmware and when I wanted to get it I didn't know how to deodex my firmware so instead I found a custom ROM which is very popular and extremely good that has a deodexed firmware.
We can do this two ways, but first we must do this.
1. Power off device
2. Boot into the stock recovery by holding Power Button+Home Button+Volume Up Button when you see the Galaxy S4 logo then let go of Power Button but keep holding Home and Volume Up
3. Wipe Data/Factory Reset
4. Wipe Cache Partition
5. Power Down
Method 1 Downloading ROM using PC then transferring to SD Card
1. Download the GoldenEye ROM from here
-https://www.androidfilehost.com/?fid=23991606952595353
2. Do not extract the .zip
3. Transfer .zip onto SD Card
4. Put SD card into phone
5. Boot phone and go through setup
6. Go to Google Play Store sign in and download ClockworkMod Rom Manager
7. Run the ROM Manager
8. Click Recovery Setup
9. Click ClockwordMod Recovery
10. Click your device.
11. Click "Flash ClockworkMod Recovery"
12. Give Superuser permissions
13. Reboot into Recovery from the ROM Manager
14. Wipe Data/Factory Reset
15. Wipe Cache Partition
16. Go to advanced
17. Wipe dalvik cache
18. Go back
19. install zip
20. Find the GoldenEye ROM from your SD card and install
21. It will start the Aroma installer click 1337M at device selection after you agree to terms.
22. Select GoldenEye Full
23. Go through the rest of the installer choosing your options that you prefer
24. It will take quite a while to install
Note: After it installs it will take a long time to boot do not panic for me it took around 15-20 minutes it might take longer for you.
Method 2 Downloading ROM using Device then transferring to SD Card
1. Boot Phone
2. Go through setup
3. Download the GoldenEye ROM from here using any browser from the Play Store
-https://www.androidfilehost.com/?fid=23991606952595353
4. Do not extract the .zip
5. Move .zip onto sd card using any file manager found on Play Store
6. Go to Google Play Store sign in and download ClockworkMod Rom Manager
7. Run the ROM Manager
8. Click Recovery Setup
9. Click ClockwordMod Recovery
10. Click your device.
11. Click "Flash ClockworkMod Recovery"
12. Give Superuser permissions
13. Reboot into Recovery from the ROM Manager
14. Wipe Data/Factory Reset
15. Wipe Cache Partition
16. Go to advanced
17. Wipe dalvik cache
18. Go back
19. install zip
20. Find the GoldenEye ROM from your SD card and install
21. It will start the Aroma installer click 1337M at device selection after you agree to terms.
22. Select GoldenEye Full
23. Go through the rest of the installer choosing your options that you prefer
24. It will take quite a while to install
Note: After it installs it will take a long time to boot do not panic for me it took around 15-20 minutes it might take longer for you.
Installing XPOSED
We can do this two ways, but first we must do this.
1. Power off device
2. Boot into the stock recovery or CWM recovery by holding Power Button+Home Button+Volume Up Button when you see the Galaxy S4 logo then let go of Power Button but keep holding Home and Volume Up
3. Wipe Data/Factory Reset
4. Wipe Cache Partition
5. Power Down
Method 1 Downloading XPOSED using PC then transferring to SD Card
1. Download the XPOSED Framework and .apk installer from here
XPOSED Framework
-https://www.dropbox.com/s/taywsnvw994uvha/xposed-v86.2-samsung-5.0.x-sdk21-by-dkcldark-arm.zip?dl=1
XPOSED Installer
-Attached at bottom of thread
2. Do not extract the .zip
3. Transfer .zip and .apk onto SD Card
4. Put SD card into phone
5. Boot phone and go through setup
6. Go to Google Play Store sign in and download ClockworkMod Rom Manager
7. Run the ROM Manager
8. Click Recovery Setup
9. Click ClockwordMod Recovery
10. Click your device.
11. Click "Flash ClockworkMod Recovery"
12. Give Superuser permissions
13. Reboot into Recovery from the ROM Manager
14. Wipe Data/Factory Reset
15. Wipe Cache Partition
16. Go to advanced
17. Wipe dalvik cache
18. Go back
19. install zip
20. Find the XPOSED Framwork from your SD card and install
21. It will start the installing
24. It will take quite a while to install
Note: After it installs it will take a long time to boot do not panic.
25. Go through setup process and then install the .apk from the SD card by clicking it using any file manager.
26. It will install
Final
We have finally finished installing XPOSED it was a long process but it was worth it.

Going to be doing some major updates to the steps stay tuned.

[GUIDE] Pantech Vega R3 IM-A850 S/K/L from KiKat to Nougat

Notes:
- I'm not the developer of the ROM. ROM developer's link is at the bottom of the thread. Support him for his brilliant work.
- You need to be in stock ROM (4.4.2) in order to flash the recovery!
- Flash at your own risk. This ROM is not stable yet!
FILES NEEDED
- ROOT -
http://4shared.com/mobile/efYolQsrce/tr_2.html
- Recovery Flash Tool - http://www.4shared.com/mobile/Svw_WpXTba/recovery.html
- RECOVERY - https://dev.androidfilehost.com/?fid=24052804347779407
- ROM - https://sourceforge.net/projects/ng...e-14.1-20170424-UNOFFICIAL-ef50l.zip/download
- SU/ROOT - SuperSU/Magisk/LOS Root
- GApps - opengapps.org - Choose ARM - Choose GApps type Pico/Nano (recommended)
Steps:
Step One - "Preparing Files"
- Extract .zip file and copy/cut recovery.img to sdcard
- Copy/cut all downloaded .apk and .zip files to sdcard as well
Step Two - "Rooting"
- Install tr_2.apk
- Tap make in ra1n
- Wait for few seconds
- A pop-up will show up that root has been installed
Step Three - "Flashing Recovery"
- Install recovery.apk
- Grant Root Access
- Wait for few seconds
- A pop-up will show up that you need to backup your current stock recovery. Make a backup
- Tap flash recovery
- Tap other from storage
- Locate where you place recovery.img that you extracted
- Tap recovery.img
- Wait for few seconds
- A pop-up will show up that you need to reboot/restart your phone to complete the process
- Tap reboot/restart
Step Four A - "Installing Nougat for Newbies"
- Power off the phone
- Wait 5 seconds
- Hold +Volume + -Volume + Power at the same time
- Use +Volume and -Volume to navigate through the menu
- Choose RECOVERY
- Wait for few seconds
- Tap Wipe
- Slide Factory Reset
- Wait for few seconds
- Tap Back
- Tap Advance Option
- Tap Dalvik Cache, Cache, Data, System and Internal Storage
- Swipe to Confirm
- Wait for few seconds
- Tap Back
- Head to the Menu
- Tap Install
- Locate external_sd
- Tap external_sd
- Tap the ROM, SU/ROOT (optional) and GApps (the add button is in the top right corner)
- Swipe to Confirm
- Wait for few seconds
- Tap Wipe dalvik/cache
- Wait for few seconds
- Tap Reboot
- Wait 'till installation is finish (est. time - 5-10 minutes)
- Enjoy
Step Four B - "Installing Nougat for Experienced"
- Power off the phone
- Wait 5 seconds
- Hold +Volume + -Volume + Power at the same time
- Use +Volume and -Volume to navigate through the menu
- Choose RECOVERY
- Wait for few seconds
- Do a Factory Reset first
- Wipe Dalvik Cache, Cache, Data, System and Internal Storage
- Install ROM
- Install SU/ROOT (optional)
- Install GApps
- Tap Wipe dalvik/cache (necessary) after successful flashing
- Wait 5-10 minutes
- Enjoy
Not Working
- Bluetooth
- Data
- Others?
Credits:
OpenGApps
Magisk
SuperSU
LineageOS
ROM Developer:
Nguyenhung9x
XDA Profile - https://forum.xda-developers.com/member.php?u=7770592
Donate to the developer for continue support to this device.

Bluetooth not working!!!
ma'am/sir i appreciate your work, but the bluetooth sir is not working... plsss kindly fix asap hehe thank you ma'am/sir for your hard work.

I dont have an Micro SD. How should I do?? Can I do without formating Internal Storage??

I bought an SD, from sandisk but couldn't download that TWRP but had the one which has same version and same dev.(Have it in HDD,Labeled for A850*)So, i did those steps and the rom would't finish installing even in 2 hours. What Should I Do?? CM and RR roms only took five minutes....

I managed to recover my dad's old [this phone] that initially ran Kitkat 4.4. Well, it worked, though sometimes it may cause some issues which is from the hardware side, or it is, or something else. Thanks.

P/S: well I found an issue for it recently though, after a while of using there's chance of your device suddenly gets bootlooping but it's like that it could get to the lock screen, but suddenly go back to the boot animation, and then it recurs the phenomenom. Not sure if the error comes from device side or the ROM being unstable.
Edit: perhaps my battery is the problem. Sometimes it suddenly shut the phone off while there're still 50% left. But at least I think so.

barnacl437 said:
P/S: well I found an issue for it recently though, after a while of using there's chance of your device suddenly gets bootlooping but it's like that it could get to the lock screen, but suddenly go back to the boot animation, and then it recurs the phenomenom. Not sure if the error comes from device side or the ROM being unstable.
Edit: perhaps my battery is the problem. Sometimes it suddenly shut the phone off while there're still 50% left. But at least I think so.
Click to expand...
Click to collapse
That's a pretty common issue, it might as well be fixable though.
Remove your battery and try cleaning the contact between the battery and the device using an eraser.