Earlier we posted the screenshots, claiming to finally have nailed Qmobile Noir A7. Here is the most requested post for the step by step method of rooting, All you are required to do is follow the steps.
Installing CWMR
1. Download the Files
i. Scatter and CWMR for A7(Download Here)
ii. SPFlashTool ( Download Here )
iii. Drivers for A7 – CD or from the Q site.
iv. root_a7.zip( Download Here )
2. With phone on, connect the phone to the computer and start USB Debugging.
3. Install the Drivers to it through driver file.
4. Now Switch the phone off and connect the phone to the computer again. It’ll ask you to install the another driver. Install it from the preloaders downloaded.
5. Put the file in Scatter per Image Below.
6. Ensure nothing but the recovery check box is clicked. Rest remain unchecked.
7. Switch off your Phone. Take the Battery out for 5 Secs and reinsert the Battery.
8. On Flashtool press download.
9. Connect your phone cable connecting it to the computer. No hurries take your time. (Ensure when download was clicked your phone was not connected to the phone)
10. Upon successful flashing you will see the green circle icon.
11. Close the tool and restart your phone in recovery mode by holding power + Volume up
12. You should be able to enter CWMR.
Rooting Phone
Download Root_A7.zip file
Copy to SD card.
Power off your phone.
Turn on by pressing power button + volume up button.
Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “Root_A7.zip” –> Select Yes
When done Successfully Go Back main CWMR And Reboot your phone.
Check your applications section you’d have superuser there.
Open Superuser app and in settings update your binaries.(Congratulations you are rooted).
PS : INCPak never lied to anyone, doubt ever us we just ensure that this procedure is verified and doesn’t mess your phone !
- See more at: http://www.incpak.com/tech/lets-root-qmobile-noir-a7/#sthash.Vds1TVe2.dpuf
CREDITS:UBAID KHAN AND KHURRAM
Related
Here's the complete steps for rooting Samsung Galaxy ACE II (for newbie) thanks to this site (http://support.evanhe.com/2012/11/13/how-to-root-samsung-galaxy-ace-ii/)
1. Download this (https://www.opendrive.com/files/63284615_5VxZV/RootPack.zip)
2. Connect your phone to the PC with the USB cable and open it up in the file manager. (You can then also backup all your stuff.)
3. Right click RootPack.zip and choose extract here, then copy upd.zip to “Phone” on the file manager. Leave your phone connected to the PC via USB up to step #8
4. In the extracted files of RootPack.zip open Odin3-v1.85 -> Odin3 v1.85.exe
5. Click on PDA and choose I8160XXLD8_ready_to_root_ANT.tar.md5 that you’ll find in the extracted files of RootPack.zip Do not click start.
6. Boot your phone in download mode (hold vol down + home + power) and wait a few seconds so that your PC detected it.
7. Now click start in Odin. If the box on the left upper side isn’t turning green hit start a 2nd time.
8. Once odin has finished, disconnect your phone from the USB and boot your phone into recovery mode (vol up + home + power)
9. Select update from SD Card via the volume keys and select upd.zip and flash it.
This is for newbie like me. Credits to evanhe
Cache
can we install the cwm from cahce
if our device is rooted ?
Install XXLPY Android 4.1.2 Jelly Bean Firmware on I9070 Galaxy S Advance
LINK-
http://www.hotfile.com/dl/187838919/fd98d34/I9070XXLPY_I9070SERLPY_SER.zip.html
STEPS-
Android 4.1.2 Official Firmware
1.Extract Firmware zip file that you downloaded already from above link, you will get a .tar file and some other files.
2.Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
3.Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
4.Now, put the Galaxy S Advance I9070 phone in Download Mode by pressing pressing and holding down the Volume Down and Home buttons while pressing the Power button until you are welcomed by a green robot indicating you are in Download Mode.
5.Now run Odin3 v3.07.exe (see Step 2) as an Administrator because Admin privileges is required to complete the process smoothly.
6.Now connect your Galaxy S Advance GT-I9070 with your PC using USB cable. A message will arrive under Odin’s message box in the bottom left saying “Added!!”. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should then reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
7.Select these files in Odin at respective buttons from extracted I9070XXLPY firmware folder :
a)Click the PDA Button, and select the .tar file here with *code* appearing in its name
8.in Odin window, make sure Auto Reboot and F. Reset Time checkboxes are selected. Also, make sure that Re-Partition checkbox is selected, only if you are using a .pit file (see Step 7.4).
9.Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process.
10.Once flashing completed, the phone will reboot automatically and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can then unplug the USB cable to disconnect your device from computer.
NOTE-If you have PARAMETER ERROR delete.md5,extension should end with .tar and put it in PDA.
ROOT(by shaaan)
How to :
1. Download the zip and place it in the root of your sd card.
PS : SD Card is a must.
2. Reboot to the stock recovery.
3. Select install update from external storage.
4. Select the root.zip file.
5. Viola
Enjoy your rooted JB.
LINK- http://d-h.st/ook
Thread already there under general.
http://forum.xda-developers.com/showthread.php?t=2086965
Reported.
hmm
thats was not a proper guide,
you edited it later.
Perform a factory reset after booting 4.1.2 ... else you will get "Insert SIM card" error.
Thread closed, its pretty much the same as this one >>> http://forum.xda-developers.com/showthread.php?t=2086965
Today I am sharing how to root MMX A110 using sp flash tools
First you need some things download below
1) CWM recovery
http://d-h.st/Ky2
Thnxx @suhas.holls
2) MMX A110 Drivers
http://www.mediafire.com/?5ai8nwihmp30grw
3) VCOM drivers
http://www.mediafire.com/?3wec990b42j3nn7
4) SP flash tools
http://www.mediafire.com/?b111ivr9it76cma
5) Supersu.zip
http://www.mediafire.com/?i1y443she8hlby6
6) MT6577 scatter file
http://www.mediafire.com/?2cp7i70khi8fe84
Now after downloading all things
1)Install The drivers in your PC or lappy whatever, window xp or 7 should be used.
2)Now first copy supersu.zip into root(out of every folder)of your phone's SD card
3) Now in developers option tick USB Debugging
4) Switch off the phone remove then replace battery and connect it to PC now your PC will install MTK preloaders.
5) Now remove data cable and don't turn on the phone, if its turned on itself then turn it off
6) Now open sp flash tools folder and open spflashtools.exe , search for the option "Scatter-Loading" and click on it and locate the scatter file you downloaded.
7) A list will appear then untick all except"Recovery"
8) Click on recovery and locate the cwm recovery you downloaded.
9) After selecting recovery insert data cable in PC and not in phone only connect one side i.e. to the PC.
10)Now click on download button and a countdown will start in the lower progress bar then connect your phone (in switched off state) Then a yellow bar and a green bar will appear and after that a green ring will appear saying "Download OK".
Your phone's recovery is now cwm.
11) Now remove phone and press Volume up volume down power key simultaneously and a mode will appear with two option recovery mode and factory mode.
12) Using volume up choose recovery mode and press power key.
13) then choose again recovery mode and press volume down key.
14) Now choose Install a zip from SD card and select"supersu.zip"And after installing it reboot your phone.
After rebooting you will find an app named Supersu
Hurray Your phone is rooted and now it has endless things to do.
Remember- Rooting void your phone's warranty
If you liked my work, please Hit thanks button it will motivate me and won't cost you.
Important
avinash130413 said:
Today I am sharing how to root MMX A110 using so flash
I am not responsible if anything happens to your phone, do at your own risk..
Click to expand...
Click to collapse
THIS WILL VOID YOUR WARRANTY OR MAY BRICK YOUR PHONE IF NOT DONE CORRECTLY.
I made this because i wanted to play AR games on an unsupported phone, so i want to help other people.
Follow this tutorial CLOSELY, or you'll mess up your phone
WARNING: THIS POST IS DIVIDED IN TO PARTS, IF YOU'RE HERE FOR THE A20e ROOT GUIDE, PLEASE CLICK (Coming soon)
1.0: Preparing.
1. Get your firmware from Sammobile or other sites
Get the NEWEST firmware that is from YOUR COUNTRY.
2. Download and install samsung mobile drivers.
3. Download ODIN Flash tool.
1.1: Unlocking your bootloader.
From this point on, you are taking a risk. You will void your warranty if you continue, i cant stress this enough.
1. Open the settings app, and navigate to: Device Info>Software Information and press Build number 7 times in a row. You will now have access to the developer settings.
2. Navigate back to settings, scroll down and press on "Developer settings"
3. Now, you should see a button called "OEM Unlock". PRESSING THIS WILL WIPE ALL OF YOUR DATA. (Which is normal.)
4. Go through the inital setup, and dont enter your data YET. Dont turn on wifi aswell, since youre going to wipe your data again later.
5. Now, turn off your phone.
6. When your phone is turned off, hold the Volume UP and DOWN button, and plug in your USB-Type C cable.
7. Now, hold the volume UP button for 8 seconds, until the screen changes. Press the volume UP button afterwards. Your data will get wiped again.
8. Go through the initial setup AGAIN, connect to wifi, but DONT enter your google/samsung account data just yet.
You have now unlocked your bootloader.
1.2: Unpacking your boot image.
1. Once you have the firmware, extract it using 7-Zip (Or any other extraction program).
2. You should now have a file called "boot.img.lz4"
3. Download the LZ4 Program on Github.
4. -Extract the zip in any EMPTY folder.
-Put the "boot.img.lz4" into the folder.
-Open CMD. Navigate to the folder you extracted LZ4 into.
- use this command to extract it: "lz4.exe -d boot.img.lz4 boot.img
- Done, now put the "boot.img" to your phone storage.
1.3: Patching the boot image.
1. After you copied the "boot.img" to your phone storage, open magisk manager.
2. Now, select the Install button on the TOP. Press "Patch an image"
3. Select the "boot.img" file you copied from your PC.
4. Wait.
5. Done. Copy the "magisk_patched.img" file to your computer.
6. Convert the ".img" file into a ".tar" file.
2.0: Rooting: Flashing the .tar to your phone.
Follow closely.
1. Turn off your phone, and hold the volume UP and Power button at the same time. After you booted into the recovery, select "reboot into bootloader".
2. Open odin, and firstly go to "options" and untick "Auto reboot". Then, press the "AP" Slot, and select the "magisk_patched.tar" file.
3. Connect your USB Cable, and press "start".
4. it should now say "PASS"
2.1: Rooting
1. hold the volume DOWN and Power button for 7 seconds.
2. QUICKLY hold the volume UP and Power button
3. Select "Wipe data". Press yes.
3. Now, go through the initial setup. You can now enter your data, since we arent wiping our phone anymore.
3. Final Touches
1. Download Magisk Manager again. Open it, and it will install a zip. It will automatically restart.
2. Open magisk manager. If there is a GREEN tick on the top, Well done! You've made it!
You are done with rooting your phone! you can now leave, or continue if you want to play AR games.
Other: AR Compatibility
1. Open magisk manager, press the 3 lines on the top left, and select "downloads"
2. Search "ARCore"
3. Install it, and reset your phone.
4. Now, go to the play store and install "ARCore"
5. You have AR access! Download games like "FNaF AR" or anything else.
This guide will get updated every week.
anyone can confirm this'll work?
Chiryn said:
anyone can confirm this'll work?
Click to expand...
Click to collapse
I tried it, but it didn't work. I think I downloaded a bad firmware tho. I am going to try it now. Btw. if you want an easy firm download I highly recomend Frija v.1.3.0. - only easy, fast and WORKING (at least for me) firmware downloader.
I am stuck at odin saying NAND Write Start!!.
Could anyone help me?
Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100
DevOpsXDA said:
Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100
Click to expand...
Click to collapse
Hi, i can use this way Also for Vodafone Smart Tab 10?
DevOpsXDA said:
Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100
Click to expand...
Click to collapse
where is the archive?