1st way :
Pulled full OTA file for Lenovo Vibe Shot - z90a40 ROW
Installation Procedures for the official rekaveri following:
Clean, not rutirovannaya and the changed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the file update.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select English and tychem to Install update.zip
What follows is some question about the installation. Select YES
The installation process is 100% dlitelnyy.Posle installation still some time to think. Do not panic.
After installation is complete, select the restart system . The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
2nd way :
How to install TWRP rekaveri for the following:
Installed S240-th firmware.
Be sure to set the region code. After the update, you do not change ...
Download the archive TWRP_lenovoota.zip and throw your phone. I checked on the external memory card.
Reboot in rekaveri. Select Install and update the file with.
Make wipes are cache, dalvik-cache, data and phone.
After installation is complete, reboot the system. The first start will be long enough.
I recommend to do a factory reset. In order to avoid possible problems during the transition from one to another OS
down load files : https://cloud.mail.ru/public/36qb/qhqsDGNVr
3rd: for who have problem with 1st & 2nd
1- download thise file :http://lenovo-forums.ru/topic/19311...363_160625_row/?do=findComment&comment=497835
2- Installing the firmware using QFIL on the Lenovo device based on Qualcomm chips:
(A)
We set vcredist_x86.exe , which go in the complete set with "proshivalschikom" itself;
set himself "flasher" - QPST.2.7.422.msi ;
install drivers for the Qualcomm chips - they are in the archive Qualcomm_USB_Drivers.7z
(B)
Completely turn off your device , and then we press the volume up key (Volume Up), and holding it connect the USB-cable which is already connected to the USB 2.0 port of your PC - in the Device Manager, you should see the device Qualcomm Lenovo HS-USB QDLoader 9008
3-Just install the firmware: -
(A)
Run the program QFIL
In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn)
, for this click on Knop «the Browse» , in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then choose prog_emmc_firehose_89XX.mbn file and click "Open" . then click on digging "the Load the XML ..." , alternately choose in the window that opens - first rawprogram0.xml and click "Open", and then patch0.xml and also click "Open".
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-76252800-1419253051.png
(B)
Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
The device should restart at the successful process of filling the firmware and boot into Android OS.
http://lenovo-forums.ru/uploads/monthly_12_2014/post-53625-0-39327800-1419253052.png
for root :::::::::
1ST : Unlock BootLoader
1. Install the software package QPST and drivers LenovoUsbDriver , QualcommUSBDrivers on your computer ( drivers are archived Service QPST programs )
2. Unpack the archive Z90a40_Android-L_unlock_7M.7z to the root of any drive.
3. Connect the device ( Z90a40 ) to a PC via USB-cable.
4. On your device, turn on debugging by the ADB .
5. Run the utility QFIL :
- in the line Select Build Type , select the Flat the Build
- in line Select Programmer press the button Browse and specify the path to the unzipped files \ Z90a40_unlock_7M \ the img \ prog_emmc_firehose_8936.mbn
- click on the button Load XML and select the first rawprogram0.xml and then patch0.xml
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-1.png.661990ee862f9d3e35653a046c561c4a.png
6. Run Reboot_QDLoader.bat::
http://lenovo-forums.ru/uploads/mon...7M_3.png.3018b3c020fc59cdab5e8b73461cc42e.png
7. In the main program window to see that the device is switched to the mode Qualcomm HS-USB QDLoader 9008 .
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-2.png.a73fc14b40f138b5a2fa71480a6df072.png
8.Start the process of firmware bootloader unlocked by pressing the button Download .
(If you have not defined QFIL utility device Qualcomm HS-USB QDLoader 9008 mode, then you should check through the Device Manager on your PC - there are no problems with Qualcomm driver)
9. At the end of the process unlocked bootloader firmware to the device you will see a sign in the window Status QFIL program the following lines:
Download Succeed
the Finish Download
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-3.png.3a5566b24283b342edc285b724004305.png
10.Turning off the device from the USB-cable and clamp button Power to turn on the device (sometimes takes up to 10-20 seconds).
11. Open the main settings menu, the device and go to the " About phone -> Device Information " and press 7 times to select " Build number " until the display shows that you have become a developer.
12. Go back to the device's main Settings menu and go to the " For Developers " in " Factory Unlock " switch the toggle switch in the ON state .
13.Turn off the device (Z90a40), we press both volume buttons and connects to a PC via a USB-cable (the device enters the mode fastboot ), then run Unlock_Bootloader.bat
You should see the value of true if the secondary Bootloader check the status in the string the Device unlocked :
(Bootloader) Device tampered: false
(Bootloader) Device unlocked: true
(Bootloader) Charger screen enabled: false
(Bootloader) Display panel: A
OKAY [0.046s]
finished. total time: 0.046s
http://lenovo-forums.ru/uploads/monthly_2016_04/sshot-4.png.49581f68c35fd8e8922eaef936037988.png
14.So all of this unlocking process is completed successfully .
files need links :
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56368
2nd: to do ( install TWRP 3.0.2.0 for Lenovo Vibe Shot )
Extract the folder TWRP archive TWRP-3.0.2.0_Z90a40_by_SevenMaxs.7z to the root of any drive
Turn off the device ( Z90a40 ), we press both volume buttons and connects to a PC via a USB-cable; the device will go into fastboot mode (on the PC must be set for the driver ADB).
Connect your phone to a PC via usb-cable, and run the Flash-TWRP.bat ( the Run-TWRP.bat for a single run TWRP.)
We are waiting for the phone to boot into TWRP
You can now disconnect the usb-cord
Installation is finished!
links : http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=56391
Login or TWRP:
On the device is turned off hold down both volume buttons and the inclusion of produce, release the power button immediately once the device is turned on and the volume buttons once away; boot logo TWRP.
3rd : install su from twrp
su.zip link : https://drive.google.com/file/d/0BxQ_dY80FUzYUXN6QThDd3pSWWc/view?usp=sharing
4th: install xposed.zip ( the erorrs have been solved)
link :
soooooooooooooooooooooon
soz for error happen before
updated 23/8/2016
that's all
Everything is fine, but TWRP in Russian how to change it to English?
xposed mode is not installing
in TWRP its said that I/O error on system folder.
MOD EDIT: Please don't quote the OP
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot
shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Sent from my Lenovo VIBEShot
Click to expand...
Click to collapse
Root successful :good:
but I cant able to xposed framework
because in TWRP its says "cp: can't stat "/system" I/O error"
---------- Post added at 03:49 AM ---------- Previous post was at 02:51 AM ----------
cant able to install xposed framework tried everything
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
xposed worked with me and now erorr
sorry for that but it solved try agine
since root of the rom I tried about hundred times but still xposed framework not installed ?
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
yasirriaz1977 said:
since root of the rom I tried about hundred times but still xposed framework not installed ?
Click to expand...
Click to collapse
Try new zip
shouk_1987 said:
In Chinese MM which used the same TWRP i guess
I played with buttons it is one of the bottom buttons
It will give you a blue screen with tabs
One of them has the earth planet icon
It contain languages you will find english within them
Please confirm that rooting was successful on official S363 MM or not
Click to expand...
Click to collapse
All work now
elbhrawy said:
Try new zip
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
yasirriaz1977 said:
http://4pda.ru/forum/index.php?act=attach&id=7533763&dlsess=8f37b888e4eb17f073e312a5fa82e658 new link give me error like this
Click to expand...
Click to collapse
I will upload now
elbhrawy said:
I will upload now
Click to expand...
Click to collapse
eagerly waiting for xpposed to work on my charmed device
yasirriaz1977 said:
eagerly waiting for xpposed to work on my charmed device
Click to expand...
Click to collapse
Updated
elbhrawy said:
Updated
Click to expand...
Click to collapse
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again
yasirriaz1977 said:
Downloading ..........................................
when installed will update here soon.....:good:
update.........
same error
cp:can't stat '/system/xposed.prop': I/O error
updater process ended with ERROR: 1
Error installing zip file '/sdcard/Z90a40 restoration/xposed-v80-sdk23-arm64-by-romracer-20160202.zip'
update .........
after aforementioned error my device also unroot
now I am going to root it again
Click to expand...
Click to collapse
its worked with me
elbhrawy said:
its worked with me
Click to expand...
Click to collapse
but its not worked for me, please do something
Sent from my Lenovo Z90a40 using XDA Premium 4 mobile app
i have problem with update
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance
il_milanese said:
the update.zip block at 45% update
i'll try with file TWRP_lenovoota.zip...where i'll put the file?
on sd card ...but i put it in specific folder? rename the file?
tnx in advance
Click to expand...
Click to collapse
use qfil better
I have the bootloader unlock and TWRP installed,
the TWRP recovery let me know that i have no SO installed.
how can I install/flash a rom without brick the phone with this recovery installed?
Things to mustnt do with TWRP installed?
i've been 2 days without phone(bricked). I need help
Thank you
a bit confussing cause the english not too good, look like translated from other language.
can somebody fix it?
so can i have root with marsmallow?
Thank U.
OTA update v363 Ok. Thank U.
This Guide Tells You How To Update Your Lenovo Vibe X3 (X3a40 Variant) To The Latest Marshmallow Firmware
Warning
If This Bricks Your Phone I Am Not Responsible Although It Is Very Safe But If You Do Anything Stupid It May Brick The Phone If This Happens Repeat All The Steps Again Without Messing Up It Should Fix The Phone
List Of Things Required For Updating Your DeviceDrivers + QFIL - https://drive.google.com/folderview?id=0B5QzQ51ejd3rLWREYmNjWjNwV1U&usp=sharing
Lenovo Vibe X3 Marshmallow Firmware - https://drive.google.com/file/d/0B6fGoFSBPp8QcWtaUlcwVTMxMHc/view?usp=sharing
Lets Begin
Flashing Guide
WARNING: Everything apart from data in external SD card will be wiped. Make sure to backup everything.
1.Download the QFIL flash package ZIP and appropriate ZIP from Drivers+QFIL.
2.Extract the ZIPs to a folder whose complete path has no spaces (space characters) at all.
3.Make sure you uninstall any other phone's PC Suite/drivers as they may cause conflicts. Microsoft Emergency Driver (installed for restoring Lumia devices) is known to conflict, please uninstall it.
4.Go to Drivers+QFIL folder extracted in Step 2, run the appropriate 'INSTALL_DRIVERS_&_QFIL.bat' and follow the instructions.
5.Backup contacts, SMS, apps, etc. as well as the entire internal storage as they will all be wiped(you will setup a new phone). Internal storage WILL BE erased when using the QFIL flash method.
6.Run 'QFIL' program. (If Unable To Find It Search It In Start Menu You Will Find It There)
7.Select 'Flat Build' as build type.
8.Click on 'Browse', select the 'prog_emmc_firehose_8992.mbn' file from the 'X3a40_S217_160623_ROW_QFIL' folder which you extracted.
9.Click on 'Load XML' and select 'rawprogram0.xml' followed by 'patch0.xml'.
10.Make sure you completed each step precisely, the USB cable is connected ONLY to USB port (USB 2.0 preferably) of PC and not to device yet, the device is powered off and is charged (at least 40%).
11.Now boot into EDL by plugging in the USB cable to device and quickly pressing and holding power button for ~1 second. QFIL's 'No port available' text should change to 'Qualcomm HS-USB QDLoader 9008 (COMXX)'. The display will stay off so, don't worry about it.
12.Within ~5 seconds put the device on a stable surface (so that it doesn't move around or shake) and press the 'Download' button on QFIL. If you are late, the device starts to power on normally and you need to go back to Step 11 and continue.
13.Wait for the flash to complete and 'Download Succeeded' message appear at the bottom.
14.Unplug the USB cable from the device and press and hold the power button for ~10 seconds to power it off.
15.Now power on the device normally. If display doesn't turn on press and hold the power button again for longer time, it will boot.
16.Once you have finished the initial set up, open dialer, dial '####682#', choose your region (IN - For India) and confirm. [Don't Skip This Step Its Important]
NOTE - IF Having Trouble In Installing The Drivers Or Detecting The Phone In QFIL Google On How To Disable Signature Enforcement In Windows 8 or 8.1 or 10 And After Doing That Again Install The Drivers.
HIT Thanks Button If I Helped You It Will Keep Me Motivated In Helping Others
TIPS & INFORMATIONThe various modes X3a40 can boot into:
Recovery mode: Press and hold Volume up + Volume down + Power together until Lenovo logo shows up and flickers once. Release the buttons and you will reach the recovery. This opens up the recovery of the device.
Qualcomm Diagnostics mode: Press and hold Volume down + Power button together until Lenovo logo shows up and flickers once to boot into this mode. This opens up the Qualcomm Diagnostics screen which has a number of hardware testing and other tools along with ability to flash the stock ROM. It is also used for further Diagnosis using a PC.
Fastboot mode: Press and hold Volume up + Volume down and plug in the USB cable(already connected to PC). You may also use the ADB command "adb reboot bootloader". Obviously you need a working device with USB Debugging turned on and ADB installed on PC. This opens the traditional Fastboot interface.
EDL mode: Plug the USB cable and quickly press and hold the power button for a little while. Device stays in EDL only for ~5 seconds unless you start firmware flash via QFIL. You can also use ADB command "adb reboot edl". This will put your device in Qualcomm Emergency Download Mode which is meant to flash stock firmware using QFIL tool on working/bricked devices.
Normal mode: This is what you boot by normally pressing the power button. I don't need to say much about this one.
Keep your NV data (IMEI, Serial No., etc.) backed up from QFIL>Tools>QCN Backup Restore. Device must be in Qualcomm Diagnostics mode. There are many more ways to do this.
#Note- If Any Of The Link Goes Down Inform Me I'll Bring The Up As soon as Possible.
Will just flashing the SuperSU zip enable me to get root in Marshmallow rom?
Or should I do everything from this thread again to gain root? I already have root in my lollipop and want to update to Marshmallow only if I can get root in it.
This is stolen from this existing thread:
http://forum.xda-developers.com/android/development/rom-lenovo-vibe-x3-row-x3a40-stock-t3328461
Thread closed.
Warning: this device
(Build: LW_X325_APR_2017_V2748_01_FINAL
Build fingerprint: 'alps/Z22/Z22:4.4.2/KOT49H/1492164051:user/test-keys')
contains the com.adups.fota and com.data.acquisition malware. Use at your own risk!
Credit: All credit goes to:
yuweng for Easy Magic TWRP Installer for all MediaTek Devices
out386 for [MTK] Rooting a device (kind of) manually
koush for Universal ADB drivers
Chainfire for adbd Insecure
bovirus and rua1 for MTK Droid Root & Tools
Hovatek for [Tutorial] How to manually install MT65xx (MediaTek) USB VCOM drivers on Windows
Alternate download links:
https://mega.nz/#!UAl2HYoR!jUgMi_YkrrQ3CBhjMSCRcZat1QGEhbnOiJ6XjQV8yEw
OR
http://www.mediafire.com/file/a2eqra3fpzxpy88/recovery.img
Pre-setup:
You will need:
Universal ADB drivers
MTK Droid Root & Tools
SP Flash Tool
MediaTek PreLoader USB VCOM: I used this method from Hovatek which works on Windows 7 x64 but I can't vouch for other OS/architectures
Setup Instructions:
1. Install the Universal ADB drivers.
2. With your phone turned on, connect your phone via USB. USB debugging must be enabled and the phone must be connected as Camera (PTP) for any tools to access it.
3. Use MTK Droid Root & Tools to generate a scatter file.
4. Disconnect the USB cable. Turn your phone off and remove the battery. Reconnect the USB cable, keeping the phone turned off.
5. Open SP Flash Tool. Optional but highly recommended: use the Readback tab to backup your current ROM. Root is NOT required for readback backup. Load the scatter file generated in step 3. The download agent should be MTK_AllInOne_DA.bin by default, select it if it isn't.
6. Browse and select the recovery.img if it isn't already. Make sure that ONLY the checkbox to the left of RECOVERY is checked! The dropdown menu should be set to "Download Only", select it if it isn't. Click Download and wait for a green check mark to appear. Now it's safe to disconnect the USB, put the battery back in, start the phone, and reconnect the USB.
7. The fastest way to get to recovery is to boot normally, then open adb and type and enter adb reboot recovery to reboot directly into recovery. Holding volume up + power from the off state works too. Volume down + power enters factory test mode which isn't very interesting.
Notes:
The bootloader is unlocked. It appears that there's no easy way for a non-root user to tell that though, fastboot oem commands will silently hang indefinitely, fastboot getvar all only returns partition names and sizes, stock recovery doesn't show lock status...
All images must be flashed. fastboot boot will silently hang on 'booting...' indefinitely.
fastboot flash can be used to flash boot.img but not recovery.img, some sort of permissions issue
End:
Let me know if I forgot something.
This post appears to be intended to refer to SMT TELECOMM HK LIMITED X325 devices that use Life Wireless (mobile virtual operator) branding (There is also a Social Mobile Telecommunications branded version of X325).
The title refers to the device as "BPX325", but BPX325 is the model code of the battery, not the device.
Thanks for the recovery. It would also be good to state what version of TWRP the recovery is based on.
Ascii3 said:
This post appears to be intended to refer to SMT TELECOMM HK LIMITED X325 devices that use Life Wireless (mobile virtual operator) branding (There is also a Social Mobile Telecommunications branded version of X325).
The title refers to the device as "BPX325", but BPX325 is the model code of the battery, not the device.
Thanks for the recovery. It would also be good to state what version of TWRP the recovery is based on.
Click to expand...
Click to collapse
Oops, fixed. This uses TWRP 2.8.2.0. I only know for sure that it works on my device, maybe this will help determine compatibility?
[ro.mediatek.chip_ver]: [S01]
[ro.mediatek.platform]: [MT6572]
[ro.mediatek.version.branch]: [KK1.MP7]
[ro.mediatek.version.release]: [ALPS.KK1.MP7.V1]
I'm not sure. I'm no Android developer, I learned all this the hard (trial and error) way after finding adups.fota in the system partition and not trusting rooting apps to do the job for me.
*C.M FLARE S7 CMW/PHILZ TOUCH CUSTOM RECOVERY*
[Tutorial]
Root not necessary*
No need to: ro.secure = 0 /off
REQUIREMENTS LISTED BELOW:
*Enable Developer Options [Turn On*]
*OEM Unlock [Optional*]
*Enable USB Debugging [Turn On*]
*Download C.M Flare S7 Recovery [Complete Set*]: https://drive.google.com/open?id=1SzTbVQ_dIiWdqj7cuB_17b9P5J1la4-C
------------------
Option 1: [Through SP FLASH]
Step1: Open SP FLASH Flash_tool.exe make sure to run as Administration.
Step2: On Scatter loading file, Choose MT6739_Android Scatter.txt file.
Step3: Select Download Only.
Step4: Uncheck all and Check the recovery only
Step5: Locate and Choose custom recovery.img file
Step6: After selecting the recovery.img file, press the DOWNLOAD button
Step7: Power off your phone and then remove the battery
Step8: Connect the phone USB cable and wait for 30 seconds
Step9: if the flashing has been successful, disconnect the cable then Press VOLUME UP + POWER Button.
Option 2: [Through ADB]
Step1: You should Enable USB Debugging mode before using adb
(Located in "Settings", "System", and tap 'About Phone' 7 times)
Go back to System Settings
Turn on: DEVELOPER OPTIONS.
Turn on: OEM UNLOCK & USB DEBUGGING.
Step 2: On your Computer, install "ADB-Setup-1.4.3" then after this software has been installed
Before you can use ADB you should Unlock the BOOTLOADER before flashing (this will wipe or reset the phone)
*make sure that the "OEM UNLOCK" is turned on*
On you computer open 'CMD' command.
-----------------------
Unlocking the OEM BOOTLOADER to enable the Flash feature on Fastboot*
you can use VOLUME UP + POWER BUTTON to go to Fastboot by selecting BootLoader Or ADB.
Option 1: using adb
Type:
adb devices
(Phone id will pop up in cmd with the list of 'DEVICES' attached)
adb reboot bootloader
(*in Fastboot type*)
fastboot oem unlock
(*Message will pop-up on your phone then Press VOLUME UP*)
(*To enable Flashing Custom Recovery Type command *)
fastboot flashing unlock_critical
(*Again Press VOLUME UP to enable*)
fastboot flashing get_unlock_ability
(*Queries bootloader to see if the device is unlocked*)
-----------------------
after unlocking the fastboot and oem bootloader
you can now Flash the Custom Recovery [CWM/Philz Touch 6]
in C.M FLARE S7 Folder Locate the CWM-Philz Touch 6 Custom Recovery
and copy the recovery.img file then
Type:
fastboot flash recovery recovery.img
(after flashing succeeded*)
Type:
fastboot reboot
(it will automatically reboot your phone)
-------------------------
*[End of tutorial]*
Tutorial
I flash it via flashify and ends with successful.
But i have notice that the recovery not working on touch button, anyway thanks for making this recovery.
How to fix?
Sir please tell me on How to fix Can't mount data on this custom recovery. I try to full backup using this recovery but its ended can't mount data. Sorry for my bad english I hope you can help me sir.
TECNO & INFINIX FLASHING GUIDE
Tested phone list (Main page)
1.Tecno KD7
2. Infinix hot 9 play:
X680
X680B
X680F
3. Infinix Hot 9
X655C
4.Tecno KE7
5. Other Phone Work
*** Flash to fixt:****
Auto Restart On Off
Hanging While Device Running
Pin Lock
Pattern Lock
Face Look
Privacy Lock
Start Android Password
Auto Fastboot Mode
Auto Recovery Mode Unfortunately Android Has Stopped Virus Problem
Storage Space Running Out
Sp Tool Error S Not Enough Storage Space
White/Black LCD After Flash Other Firmware
Invalid IMEI Baseband Unknown
Dead After Flash Etc
# # Formate and Download erxta imei fixt tool ##
Tested phone : TECNO & INFINIX
** Driver & Flash tool download **
1. Download Driver:ChimeraInstaller.zip
File info :
a to z driver
2. Download Flash Tool:
Mtk bypass & flashing tool zip
File info :
1. Mtk Bypass tool
2.SP_Flash_Tool_v5.1924_Win
3.ModemMETA_v10.1816.0.01 (IMEI FIXt)
3. Your phone flash file Download: Main page
## Flashing possess
## driver install guid
Fast ChimeraInstaller tool install and open custom install -1, 2 & 6 no. driver install
pc antivirus off
Mtk bypass & flashing tool zip download & unzip
unzip folder open
mtk bypass tool folder open & libusb-win32-devel-filter-1.2.6.0 install . launch & open. install driver a filter open. after phone power off . after Volum up + Volume down + power button hold click then USB cable connected. top up mtk driver show . click and install
## flashing process :
Antivirus OFF
Mtk bypass too open & bypass button click.
Volum up + Volume down + power button hold click then USB cable connected.
Not unplug USB cable
So tool open & sClick on Scatter-loading by the right
[[ Mtk bypass tool to phone connected:
1. Volume up button hold click then USB cable connected.
2.Volume up + down button hold click then USB cable connected.
3.Volum up + Volume down + power button hold click then USB cable connected. ]]
4.Flashing guide:
Mtk bypass tool +sptool tutorial video
5.Flashing guide
Full format + IMEI fix video tutorial