Hello all.
I flashed CM10 using CMW recovery.Phone was working fine
.
Later i tried to flash back to my earlier rom. I entered download mode and installed recovery via odin.
Odin showed green and phone rebooted normally.
I then tried to enter recovery by pressing power button and selecting reboot into recovery.
However wne i did this phone is into reboot loop.
i also Cant get into recovery using Press VolUp + VolDown + Power buttons at the same time
Keep buttons pressed till "SAMSUNG" word disappear..
The phone is rebooting. i see samsung logo then it turns off the n again a logo and so on.
Please advice waht do i do to get into recovery
QUOTE=shalabhbatra100;35377211]Hello all.
I flashed CM10 using CMW recovery.Phone was working fine
.
Later i tried to flash back to my earlier rom. I entered download mode and installed recovery via odin.
Odin showed green and phone rebooted normally.
I then tried to enter recovery by pressing power button and selecting reboot into recovery.
However wne i did this phone is into reboot loop.
i also Cant get into recovery using Press VolUp + VolDown + Power buttons at the same time
Keep buttons pressed till "SAMSUNG" word disappear..
The phone is rebooting. i see samsung logo then it turns off the n again a logo and so on.
Please advice waht do i do to get into recovery[/QUOTE]
u have to do a new Odin ROM install or do a recovery install again.
until the looping boot exists u'll never get in CWM or Download mode.
keep tryin'
When I hold the -vol and power on my 8013, instead of entering the recovery image, the tablet enters the Odin mode. And my 4.3 ROM quit booting. Is there a way to flash a ROM via Odin?
lewmur said:
When I hold the -vol and power on my 8013, instead of entering the recovery image, the tablet enters the Odin mode. And my 4.3 ROM quit booting. Is there a way to flash a ROM via Odin?
Click to expand...
Click to collapse
I solved my own problem, but I'm really disappointed by the lack of response I got from this forum. For any one else who runs into the problem, I apparently had an incompatible recovery image installed. I flashed the TWRP image and now when I hold vol up and power on, it enters the recovery image and I'm able to flash .zip files. I mistakenly thought the combination was vol down and power on, when, in fact, that is apparently supposed to be for the "download" mode.
So I have TWRP on but it was mistakenly the T-Mobile version TWRP so the touch screen doesn't work and I can't hold down Vol Up+Home+Power to go to Odin. And if I hold Vol Dow+Home+Power and release right when it turns off, it just will boot back into recovery! Is there a way to reboot into download mode or anything on the main screen of TWRP? ADB? Anything?
Vindicate said:
So I have TWRP on but it was mistakenly the T-Mobile version TWRP so the touch screen doesn't work and I can't hold down Vol Up+Home+Power to go to Odin. And if I hold Vol Dow+Home+Power and release right when it turns off, it just will boot back into recovery! Is there a way to reboot into download mode or anything on the main screen of TWRP? ADB? Anything?
Click to expand...
Click to collapse
So now I'm in recovery and I tested Fastboot and ADB to see if anything would work. I got ADB to work, BUT here's the catch. The device is "Offline." Check image below....
Did the same with TWRP... awhile back..But I knew it was for the T-Mobile.
I was checking to see if it work (SCREEN WAS NOT RESPONDING, STUCK IT WAS..ALL i DID WAS VOL+ MENU-B+PWR. AND I FLASH A COPY OF THE FIRMWARE I PICKED FROM SAMSUNG WEB SITE .BACK TO STOCK NO ISSUES)
CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t
WORKED FOR ME..
HOPE YOU FIND A SOLUTION.
Vindicate said:
So I have TWRP on but it was mistakenly the T-Mobile version TWRP so the touch screen doesn't work and I can't hold down Vol Up+Home+Power to go to Odin. And if I hold Vol Dow+Home+Power and release right when it turns off, it just will boot back into recovery! Is there a way to reboot into download mode or anything on the main screen of TWRP? ADB? Anything?
Click to expand...
Click to collapse
If all else fails just Odin the firmware
Solved
How I fixed my Sprint Galaxy S6 stuck in TMobile TWRP boot loop:
I have a lot of my music I made, pictures of my kids and family and did not want to lose my data.
SO, IF YOU VALUE YOUR DATA, PLEASE FOLLOW THESE INSTRUCTIONS
1.) Download Odin 3.10.6 from here:
http://forum.xda-developers.com/showthread.php?t=2711451
2.) Download Sprint TWRP Recovery Image:
https://dl.twrp.me/zerofltespr/twrp-2.8.6.0-zerofltespr.img.tar.html
3.) Enter Galaxy S6 Download Mode:
Here are the few simple steps to boot Galaxy S6 download mode:
Turn your Samsung Galaxy S6 off completely...
you could run the battery down by resetting the phone several times,
but you could probably avoid this by trying this following button sequence:
Boot into Galaxy S6 recovery mode by pressing and holding each button, one at a time
(Volume Down>Home >Power) keys at the same time.
Release all three buttons when Samsung Galaxy S6 screen flickers and you see a warning sign.
Press Volume Up to continue booting into to Recovery mode.
4.) Flash the Sprint TWRP Recovery package:
1. Add the tar file to the "AP" section of ODIN.
2. Under Options make sure to ONLY select "Auto Reboot" and "F. Reset Time".
DO NOT select repartition, or anything else!
3. Click start and it will immediately flash and reboot.
4. Click reboot system and you have your phone back to a working condition.
MafiaIlluminati said:
How I fixed my Sprint Galaxy S6 stuck in TMobile TWRP boot loop:
I have a lot of my music I made, pictures of my kids and family and did not want to lose my data.
SO, IF YOU VALUE YOUR DATA, PLEASE FOLLOW THESE INSTRUCTIONS
1.) Download Odin 3.10.6 from here:
http://forum.xda-developers.com/showthread.php?t=2711451
2.) Download Sprint TWRP Recovery Image:
https://dl.twrp.me/zerofltespr/twrp-2.8.6.0-zerofltespr.img.tar.html
3.) Enter Galaxy S6 Download Mode:
Here are the few simple steps to boot Galaxy S6 download mode:
Switch your Samsung Galaxy S6 off completely...
you could run the battery down by resetting the phone several times,
but you could probably avoid this by just trying this following button sequence:
Boot into Galaxy S6 recovery mode by pressing and holding each button, one at a time
1. Volume Down, 2. Home and 3. Power keys at the same time.
Release all three buttons when Samsung Galaxy S6 screen flickers and you see a warning sign.
Press Volume Up to continue to the main screen of Recovery mode.
4.) Flash the Sprint TWRP Recovery package:
1. Add the tar file to the "AP" section of ODIN.
2. Under Options make sure to ONLY select "Auto Reboot" and "F. Reset Time". DO NOT select repartition, or anything else!
3. Click start and it will immediately flash and reboot.
4. Click reboot system and you have your phone back to a working condition.
Click to expand...
Click to collapse
This just saved me! Thank you!
cassini24 said:
This just saved me! Thank you!
Click to expand...
Click to collapse
You're welcome! I couldn't imagine anyone else losing their data like I almost did mine. :angel:
Which .tar file should i put into AP?. I have a G925I version.
currently it boots ONLY into TWRP.
help please i have tried to root my s7 edge didnt work was saying failed cashe so tried some tips on changing the data file to FAT but phone bat went while it was doing it and now phone loads up the team win recovery screen and freezes on that
twrp stuck on exit: s6 edge
twrp getting stuck when i press reboot or power off..so i cant go back now.whatever i do the screen again open twrp.plz help
update: just download latest version from twrp site and flash it using odin..dont download anyfile from other pages or links. now my problem is solved.
My Note Edge on AT&T stock not rooted. All of a sudden went to a black screen with a blue notification flashing. I was able to do a factory reset and wiped the cache. Now I'm in a constant bootloop and/or the black screen. I have changed the battery as well and still nothing. Does anyone have any other ideas?
Download cmw recOvery for your model and use odin to flash the recovery while your phone is in the downloading screen (volume down+home button+power button). Use the csc in odin locate the downloaded recovery and press start.
If this doesn't work then you have to download the stock firmware which is around 2 gb and flash it usin odin in the same downloading screen, this time you have to use the ap option to located the file in odin and press start.
You have to have Samsung driver installed for odin to recognise when the device connects.
Hi,
I got an Samsung XCover 4s and tried to flash Lineage 18 with this guide: https://forum.xda-developers.com/t/...sing-odin-without-twrp-phh-lineageos.4114435/
However it never really worked (I also tried the other customROMs) and the device either started with its old firmware or just entered download mode on start so I could flash the original firmware again with Odin v3.13.
Unfortunately I did a mistake in the last try and created the new AP_xxx.tar.md5 with vbmeta.img.lz4 from the original firmware instead of the clean vbmeta.img.lz4 and flashed it. Now the device only shows the start screen and then goes black or reboots when connected to USB. I also tried to enter recovery and download mode via VOL_DOWN + HOME + POWER and VOL_UP + HOME + POWER but it doesn't work.
Is there any other option to enter download mode and flash the original firmware or is the device bricked?
Nevermind, I got into download mode again by plugging in the USB cable and pressing VOL_DOWN + HOME (NO power button) for several seconds. Flashing the original firmware worked
did you manage to flash lineage os ?