My Note Edge on AT&T stock not rooted. All of a sudden went to a black screen with a blue notification flashing. I was able to do a factory reset and wiped the cache. Now I'm in a constant bootloop and/or the black screen. I have changed the battery as well and still nothing. Does anyone have any other ideas?
Download cmw recOvery for your model and use odin to flash the recovery while your phone is in the downloading screen (volume down+home button+power button). Use the csc in odin locate the downloaded recovery and press start.
If this doesn't work then you have to download the stock firmware which is around 2 gb and flash it usin odin in the same downloading screen, this time you have to use the ap option to located the file in odin and press start.
You have to have Samsung driver installed for odin to recognise when the device connects.
Related
I installed CM10 unofficial and had signal issues and lost LTE so I wanted to go back to stock rooted. Flashed root66 via Odin and now my phone gets stuck at the 4g LTE bootscreen. I have tried everything to flash a recovery, but so far nothing has worked. I am able to access downloader mode and it says my phone is samsung official but custom and 1 flash count. What should I do now?
Turn off the phone completely
Hold the down volume, home button, and power button (this will give you yellow triangle) then press volume up to access download mode
Flash the official, none-rooted stock rom (found over at http://forum.xda-developers.com/showthread.php?t=1755386)
let me know if that worked for you.
On the S2 (AT&T) you had to do a factory reset from the E3 recovery console after doing a reset like you're doing or else it would boot loop. See if you can get into the recovery console and do a factory reset and see if that fixes it.
So I have TWRP on but it was mistakenly the T-Mobile version TWRP so the touch screen doesn't work and I can't hold down Vol Up+Home+Power to go to Odin. And if I hold Vol Dow+Home+Power and release right when it turns off, it just will boot back into recovery! Is there a way to reboot into download mode or anything on the main screen of TWRP? ADB? Anything?
Vindicate said:
So I have TWRP on but it was mistakenly the T-Mobile version TWRP so the touch screen doesn't work and I can't hold down Vol Up+Home+Power to go to Odin. And if I hold Vol Dow+Home+Power and release right when it turns off, it just will boot back into recovery! Is there a way to reboot into download mode or anything on the main screen of TWRP? ADB? Anything?
Click to expand...
Click to collapse
So now I'm in recovery and I tested Fastboot and ADB to see if anything would work. I got ADB to work, BUT here's the catch. The device is "Offline." Check image below....
Did the same with TWRP... awhile back..But I knew it was for the T-Mobile.
I was checking to see if it work (SCREEN WAS NOT RESPONDING, STUCK IT WAS..ALL i DID WAS VOL+ MENU-B+PWR. AND I FLASH A COPY OF THE FIRMWARE I PICKED FROM SAMSUNG WEB SITE .BACK TO STOCK NO ISSUES)
CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t
WORKED FOR ME..
HOPE YOU FIND A SOLUTION.
Vindicate said:
So I have TWRP on but it was mistakenly the T-Mobile version TWRP so the touch screen doesn't work and I can't hold down Vol Up+Home+Power to go to Odin. And if I hold Vol Dow+Home+Power and release right when it turns off, it just will boot back into recovery! Is there a way to reboot into download mode or anything on the main screen of TWRP? ADB? Anything?
Click to expand...
Click to collapse
If all else fails just Odin the firmware
Solved
How I fixed my Sprint Galaxy S6 stuck in TMobile TWRP boot loop:
I have a lot of my music I made, pictures of my kids and family and did not want to lose my data.
SO, IF YOU VALUE YOUR DATA, PLEASE FOLLOW THESE INSTRUCTIONS
1.) Download Odin 3.10.6 from here:
http://forum.xda-developers.com/showthread.php?t=2711451
2.) Download Sprint TWRP Recovery Image:
https://dl.twrp.me/zerofltespr/twrp-2.8.6.0-zerofltespr.img.tar.html
3.) Enter Galaxy S6 Download Mode:
Here are the few simple steps to boot Galaxy S6 download mode:
Turn your Samsung Galaxy S6 off completely...
you could run the battery down by resetting the phone several times,
but you could probably avoid this by trying this following button sequence:
Boot into Galaxy S6 recovery mode by pressing and holding each button, one at a time
(Volume Down>Home >Power) keys at the same time.
Release all three buttons when Samsung Galaxy S6 screen flickers and you see a warning sign.
Press Volume Up to continue booting into to Recovery mode.
4.) Flash the Sprint TWRP Recovery package:
1. Add the tar file to the "AP" section of ODIN.
2. Under Options make sure to ONLY select "Auto Reboot" and "F. Reset Time".
DO NOT select repartition, or anything else!
3. Click start and it will immediately flash and reboot.
4. Click reboot system and you have your phone back to a working condition.
MafiaIlluminati said:
How I fixed my Sprint Galaxy S6 stuck in TMobile TWRP boot loop:
I have a lot of my music I made, pictures of my kids and family and did not want to lose my data.
SO, IF YOU VALUE YOUR DATA, PLEASE FOLLOW THESE INSTRUCTIONS
1.) Download Odin 3.10.6 from here:
http://forum.xda-developers.com/showthread.php?t=2711451
2.) Download Sprint TWRP Recovery Image:
https://dl.twrp.me/zerofltespr/twrp-2.8.6.0-zerofltespr.img.tar.html
3.) Enter Galaxy S6 Download Mode:
Here are the few simple steps to boot Galaxy S6 download mode:
Switch your Samsung Galaxy S6 off completely...
you could run the battery down by resetting the phone several times,
but you could probably avoid this by just trying this following button sequence:
Boot into Galaxy S6 recovery mode by pressing and holding each button, one at a time
1. Volume Down, 2. Home and 3. Power keys at the same time.
Release all three buttons when Samsung Galaxy S6 screen flickers and you see a warning sign.
Press Volume Up to continue to the main screen of Recovery mode.
4.) Flash the Sprint TWRP Recovery package:
1. Add the tar file to the "AP" section of ODIN.
2. Under Options make sure to ONLY select "Auto Reboot" and "F. Reset Time". DO NOT select repartition, or anything else!
3. Click start and it will immediately flash and reboot.
4. Click reboot system and you have your phone back to a working condition.
Click to expand...
Click to collapse
This just saved me! Thank you!
cassini24 said:
This just saved me! Thank you!
Click to expand...
Click to collapse
You're welcome! I couldn't imagine anyone else losing their data like I almost did mine. :angel:
Which .tar file should i put into AP?. I have a G925I version.
currently it boots ONLY into TWRP.
help please i have tried to root my s7 edge didnt work was saying failed cashe so tried some tips on changing the data file to FAT but phone bat went while it was doing it and now phone loads up the team win recovery screen and freezes on that
twrp stuck on exit: s6 edge
twrp getting stuck when i press reboot or power off..so i cant go back now.whatever i do the screen again open twrp.plz help
update: just download latest version from twrp site and flash it using odin..dont download anyfile from other pages or links. now my problem is solved.
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Okay, so I attempted to unroot and flash the stock 5.0.2 software and I got a error on the download screen. It says SW REV. CHECK FAIL. DEVICE: 3. BINARY: 1.
If you have no knox install MM official then flash this kernel tar file (AP) https://drive.google.com/folderview?id=0B40ItdHKfkyQcTA5bnRPWDg0X28&usp=drive_web#list it will boot to mm 5min :good:
Btw you cann downgrade from 5.1.1 to 5.0.1 you just go up not down
zach616 said:
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Click to expand...
Click to collapse
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
emcardle660 said:
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
Click to expand...
Click to collapse
will try and update. thank you. didnt work.
Okay guys so now I need a ROM to flash using ODIN. I tried to download from sammobile but the speeds are too damn slow. What I tried to flash was this file " G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 " and i got the error 3 to 1.
Download Samfirm from here, XDA itself.
Run samfirm, enter model as G920F and your region code.
It will download from Samsung servers, so high speed.
Now flash using Odin the downloaded file by putting the phone in download mode, (vol down+home+power on).
How did it happen?
Did you try to flash the VOD 6.0.1 and got stuck towards the end at hidden.IMG failing the process?
If yes, then its a two minute job. Just open the 6.0.1 tar archive and look for hidden.IMG extract it anywhere and rename it from "hidden.img" to "hidden.img.tar".
Note flash this hidden.img.tar as AP in download mode, your phone should boot.
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Um if you bought it from a samsung store, then take it back there.
my sasmsung galxy sm-j700f suddenly reboot to samsung lable
my mobile unable to open it flash to me "sasmung galaxy j7 powered by android" and it refuse to open then i flash the custom firmware by odin many times but it did not work then it try to flash twrp recovery and wibe data (factory reset )it did not work
Help please
gitompak said:
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Click to expand...
Click to collapse
try this guide I made for restoring stock firmware from Samsung sever with the smartswitch app for Windows.
http://forum.xda-developers.com/galaxy-j7/j700t-development/how-to-restore-j700t1-model-to-t3423455
but you NEED YOUR SERIAL# AND MODEL # of that phone!
Fix # I dont know - if it works
Try this if it helps....
You will need ( link unavailable due to my little amount of posting and not using this account):
Galaxy J7 USB Drivers for the phone
The stock ROM for the phone (exact firmware)
Odin
First install Samsung Galaxy J7 USB drivers on Windows PC. Then Download the Samsung Galaxy J7 Stock Firmware from the link above and extract the folder on your desktop.
Download ODIN flash tool to flash the firmware on your phone. Extract the folder and you will see the ODIN.exe file in the folder.
Now Turn off your Galaxy J7 and Boot in download mode.(Hold down Volume Down + Home + Power button at the same time)
Once your Galaxy J7 is in download mode. Connect it to the PC with USB cable and run the ODIN.exe file on your desktop.
If everything is right and drivers are working properly. You will see the blue box on the ODIN screen, if not reinstall the drivers again and reboot your PC.
Now select the AP option from the ODIN screen and select the firmware file that you extracted
Hit the Start button from the ODIN screen to start the flashing process.
Once completed you will see the PASS messages on the ODIN and Phone will reboot automatically. Now you can disconnect your phone.
IMPORTANT:. If your phone is still stuck on the boot loop or in the Samsung Android Logo, then turn off the phone and reboot in recovery mode. TO do this Hold down Volume Up + Home + Power button at the same time. Now from recovery select Wipe Data/Factory Reset and after that Wipe cache partition. Now reboot you phone. If you are using a custom recovery, just wipe data/factory reset and wipe cache partition again.
DONE!!!! You unbricked your Galaxy J7. Now your Phone is running the stock ROM. Check it on the setting. ENJOY..
What is the recommended firmware for
SM-J700F/DS?? Can I flash it with any SM-J700F ?
Thanks!
hazembadr00 said:
my mobile unable to open it flash to me "sasmung galaxy j7 powered by android" and it refuse to open then i flash the custom firmware by odin many times but it did not work then it try to flash twrp recovery and wibe data (factory reset )it did not work
Help please
Click to expand...
Click to collapse
Can you not hijack threads and make your own please?
Samsung J6 Touch Not Working
J6 touch not working after official update
gitompak said:
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Click to expand...
Click to collapse
Try to install TWRP on the phone, then try to wipe out the stock firmware that installed. And of course, reinstall the original stock firmware that come on that region. Its actually came from Indonesia, so be sure to install the right one.
Sijaygamer said:
What is the recommended firmware for
SM-J700F/DS?? Can I flash it with any SM-J700F ?
Thanks!
Click to expand...
Click to collapse
i need to know the answer for this please
i"ve tried every j700f rom out there nothing worked for me
is there any OFFICIAL firmware for the j700f/ds model ?
Hello,
I bought a Samsung S8+ from someone.
Initially it worked, but during a facebook video call, the phone went off.
It was impossible to turn it back on, except in download mode. (It doesn't even boot up to the Samsung logo)
So I used Frija to download the latest OS for the G955F XEF, and flashed with ODIN (CSC File).
Odin indicates that the flash was successful but the phone does not restart and still does not turn on, except in download mode.
So I tried a flash again with Nand erase. Once again, the flash went successfull, but the phone does not start except in download mode.
I'm not sure what to do anymore: unsure:
Thanks for your help
Reboot to recovery with power + vol up
You havent said anythinf about the recovery
Nothing is happening when I try to boot in recovery mode.
Only download mode is working.
I tried flashing with Odin 3.14.4 too (had a older version before)
Use fastboot
Do fastboot reboot
Fastboot is power + volume up + bixby right ?
Nothing is happening... phone won't boot.
It is only booting in donwload mode power + volume down + bixby