Database Info

Lenovo S10 android X86

I've tested Android (2.2) Froyo on Lenovo S10 netbook. The generic stable release version of Android 2.2 (android-x86-2.2-generic.iso) does not work well at all. The problems are:
1. Screen Flickering
2. Feel slow for 1.6ghz cpu
3. no wifi
4. cannot wake-up from sleep despite holding down ESC or Arrow Keys
so I used IEEE PC version (android-x86-2.2-eeepc.iso), and found improvement. Screen stop flickering and feel fast. however, there are still no wifi and cannot wake-up from sleep. SD reader slot will not work, but instead it recognizes usb flash drive as SD card perfectly.
If anyone know how to get WIFI working or fix the sleep problem or any improvement on Lenovo S10 running Android Froyo, please post. Thanks
You can find full info about this project at
android-x86 dot org

anyone faces the same issue? pls respond. thanks.

I think 1.6 is the only stable x86 Android version there is.

android 1.6 able to use wifi on Lenovo S10? or only some specific netbook?

Same issues here. I hope that this will improve or even that they manage to port honeycomb to it.
What about forums on x86 android? Imagine having cooked roms for your laptop

hi. help
how to root android android-x86-2.2-r2
(android-x86.googlecode.com/files/android-x86-2.2-r2-s103t.iso)
for lenovo s10-3t

I try both android-x86-2.2-generic.iso and android-x86-2.2-r2-s103t.iso on my Lenovo S10-2 also not working too, keep screen flickering.
vinnyvinyny said:
I've tested Android (2.2) Froyo on Lenovo S10 netbook. The generic stable release version of Android 2.2 (android-x86-2.2-generic.iso) does not work well at all. The problems are:
1. Screen Flickering
2. Feel slow for 1.6ghz cpu
3. no wifi
4. cannot wake-up from sleep despite holding down ESC or Arrow Keys
so I used IEEE PC version (android-x86-2.2-eeepc.iso), and found improvement. Screen stop flickering and feel fast. however, there are still no wifi and cannot wake-up from sleep. SD reader slot will not work, but instead it recognizes usb flash drive as SD card perfectly.
If anyone know how to get WIFI working or fix the sleep problem or any improvement on Lenovo S10 running Android Froyo, please post. Thanks
You can find full info about this project at
android-x86 dot org
Click to expand...
Click to collapse

About which S10 you are talking about, S10, S10-2, S10-3...?
I own a S10 and I tested http://android-x86.googlecode.com/files/android-x86-2.3-RC1-eeepc.iso
Works well, no flickering and wifi is working.

I (and probably most of other people) am talking about S10-3t, which makes most sense to use android since it have touch screen.

s10-3t good work wish android-x86-2.2-r2-s103t.iso
1. Screen Flickering -( non flickering )
2. Feel slow for 1.6ghz cpu (work very fast, will start in 10 seconds with SSD)
3. no wifi (godd work after disable Ethernet card on Settings)
4. cannot wake-up from sleep despite holding down ESC or Arrow Keys (Yes, cannot wake-up, bat I solver this problem - Disable sleep screen)
for me an unsolved problem now
- keyboard Lenovo does not change modes English-Russian. only change mode En-Ru on screen keyboard
- and mini problem, all sites are loaded in the mobile mode, not very convenient.
PS. I formating android partition in EXT2 for SSD long life and fast work files system!!!! EXT2 no logging files system! for SSD and fast Read-Write it's good.

[Q] Two cm12 Q's

I'm running cm12 on my rooted notepro P900; it's a beautiful experoence. I've noticed two things and was hoping for some guidance...
1: Even after a total cold boot up, i will always have youtube show up in the running applications list. At one point I kept it from auto starting via a 3rd party program, but it made you tube unusable. Are there other ways?
2. When I adjust the volume from either my bt keyboard or the hardware buttons, the slider completely obliterates whatever else is on the screen. In a few moments it goes away and everything else is still there unharmed, but it is jarring to say the least. Since my device doesn't have an arm processor, i cant use the xposed mods that ive read are out there. Any ideas would be awesome.
Thanks!
.

angus454 said:
I'm running cm12 on my rooted notepro P900; it's a beautiful experoence. I've noticed two things and was hoping for some guidance...
1: Even after a total cold boot up, i will always have youtube show up in the running applications list. At one point I kept it from auto starting via a 3rd party program, but it made you tube unusable. Are there other ways?
2. When I adjust the volume from either my bt keyboard or the hardware buttons, the slider completely obliterates whatever else is on the screen. In a few moments it goes away and everything else is still there unharmed, but it is jarring to say the least. Since my device doesn't have an arm processor, i cant use the xposed mods that ive read are out there. Any ideas would be awesome.
Thanks!
.
Click to expand...
Click to collapse
All Exynos 5 Octa core use ARMv7 instruction set. Does ARM mean anything different? Xposed + Lollipop TouchWiz stock rom = bootloop (Pretty nice if you're bored). For CM12 xposed should work on Samsung devices.

LS.xD said:
All Exynos 5 Octa core use ARMv7 instruction set. Does ARM mean anything different? Xposed + Lollipop TouchWiz stock rom = bootloop (Pretty nice if you're bored). For CM12 xposed should work on Samsung devices.
Click to expand...
Click to collapse
thank you ! I'll make a backup and then give it a shot.

Smartwatch z80s - error on startup [unfortunately android watch has stopped]

Hi XDA members. This is my first post to XDA. Greetings to everyone. Only you people here can troubleshoot.
I have a Z80s smartwatch with MTK with specs:
-----------------------------------------------------------------------------------
Z80S 1.54 inch Android 5.1 3G Smartwatch Phone MTK6580 1.3GHz Quad Core 4GB ROM Pedometer Bluetooth GPS
Parameters：
Display: 1.54 inch 320 x 320 pixels IPS screen
CPU: MTK6580 Quad Core 1.3GHz
System: Android 5.1
RAM+ROM: 512MB RAM + 4GB ROM
Bluetooth: V4.0
SIM type: single nano SIM
Functions: GPS, Pedometer, Message, MP3, Gravity Sensor, Sound Recorder
Additional feature: simply lift your wrist, this watch screen will be bright, which makes it easy to view time
Network:
GSM: 850/900/1800/1900MHz
WCDMA: 2100MHz
---------------------------------------------------------------------
The very first time i started it the error msg appears:
[unfortunately android watch has stopped]
(i cannot insert a picture link of the problem- i need 10 posts)
I can never go to other screen so that i can reset it... there are another two keys on the right of the watch:
1. POWER ON/OFF and the other
2. GO BACK
i tried long press , continuous tap ...every combination during boot but no RESET option.
Anyone can help please

Worked after many trials
i tried every Windows app with adb:
1. Qtadb (Good app [ learned may things] - nonetheless did not solved)
2. Android MultiTools
3. Android App manager
-----------------------------
Last thing i tried is to root ( in my mind just to maybe enable system apps that could have been not initializing) using Kingo root
still the startup was messy ( error msg: unfortunately android watch has stopped)
then i saw a small (very small icon - a gift box like) appearing whenever i click OK under the above error msg)...which was an advertisement
when clicked: an advertisement appeared with a blue download button.... which i clicked ( where personally i use adblock on my PC hating ads)...
.....play store opened...and i realised ...to look for an app for factory reset on play store....
i just made a search on "factory reset" on play store (with high rating- i dnt remember something like S.R.P lab [author]) then after installed a green button displaying OPEN
- Smartwatch asked me to accept if System device want to reset....
and finally my device reset to factory default settings.......
-----------------
i THANK xda FORUMS AGAIN... Not for problem today...but for other days where great information were helpful....
Poor english of mine....

System UI crashes in Bliss Os 12

The Bliss Os 12 is extremely cool and smart.
I ran it on my live PD and installed it however, I encountered a problem after going into it.
Bliss Os 12 (latest) Generic-intel, stops taking inputs in home screen.
The 3 main(back, home, apps) taskbar still works.
I can touch it and click it.
However the input will not work in the home screen.
If I try bring down the status bar which as the battery, aeroplane mode, etc. down, it shows error System has stopped working.
Every time.
So that is the problem
Windows 10 64-bit, intel i3, Lenovo Yoga laptop.

Same here.. I'm running on AMD Ryzen 3 3200G, and ASUS Prime A320M-K Motherboard with 8GB of RAM. I'm running it as a stand alone Device so, there is no dual boot in it.
Here's the logs that I got.
del.dog/ucucroghoc.txt

Bliss OS X-axis inverted

Hi Community,
Thanks for reading my issue!
I installed Bliss OS as single boot OS on an old 2-in-1 tablet. It works fine but the X-axis is permanently inverted, so if i press left bottom on my screen, it clicks on the right bottom icon. I tried calibrating the screen with the inbuilt calibration tool but without effect. Furthermore, the screen rotation does not work but that could be a separate issue.
I would really appreciate any comments!
Specs
Intel® Atom™ x5-Z8300 processor
Intel® HD Graphics (Gen8-LP 12EU)