Related
EDIT: Hello all, I just wanted to update this post. I did some intense researching, and found out that I could download CWM (the A13 variant), and it worked. However, I don't have any physical buttons, so nothing works execept the power button which reboots it. I have attached photos, to see what I am talking about. If you can help out, or know what direction to point me, I would greatly appreciate it
Hello all,
I am going on a long shot to get this answer, but it is worth a try. I know this is not a name-brand tablet, but it was a gift, and I would have to have it returned. So, I am going to just get to the point. I have already rooted the tablet, and have rooted apps up and running. My first issue is that the Youtube app does not work properly. With ANY video, it plays, but there is no video, but the sound is perfectly fine. I thought this might have been a video hardware issue (or rooting issue), however, this is not the issue. I have used JoeVLC to play many video files, and downloaded another browser and when to Youtube and played using flash as well. So if anyone could answer that, it would be great.
My second question is an actual root-question. This tablet is the EGS004 model with a 1.1ghz single-core and 512 of RAM, just to give you an idea of what I am working with. One thing I noticed is that it does not have any volume buttons, so a recovery may not be possible. But I would really like to flash some files. The way I went to root this device is by using the Cydia Impactor method, which worked flawlessly. I am not expecting a ROM, but I would like to cut out the "middle-man" and just run on pure android power. If you have any other idea on what I can do, I would greatly appreciate it.
Note, I have rooted MANY devices before, so I am very familiar with the process and how it works, but not to the knowledge on doing it by myself obviously. Thank you for my help.
I have the same problem with the Youtube App. It was working fine before I rooted the tablet, so I'm guessing it's a rooting issue. I've tried this app from the Play Store called "Video Tube" and it seems to play YouTube videos quite well, but it has a hard time scaling the video to the whole screen on some videos (The video itself is centered and has black margins around it).
Accessing Recovery will probably be quite difficult to do on this tablet. However, I installed the xposed framework and GravityBox, which gave me access to the advanced power menu which has an option to reboot into recovery. But I didn't try it yet. (Since I don't want to break/brick it since I use it for school & note taking )
Herc08 said:
My first issue is that the Youtube app does not work properly. With ANY video, it plays, but there is no video, but the sound is perfectly fine. I thought this might have been a video hardware issue (or rooting issue), however, this is not the issue. I have used JoeVLC to play many video files, and downloaded another browser and when to Youtube and played using flash as well. So if anyone could answer that, it would be great.
Click to expand...
Click to collapse
Hi,
I've also an ALLWINNER A13 tablet ... I'm not quite sure if we have the same version but anyway, as I read your post, I installed the youtube app from the playstore (version 5.3.32) and it works fine, video playing - pushing the playing video arround ...
.. oh, perhaps important, my tablet is not rooted ^^
regards
Juha
PS: You might post your tablet kernel version info, than we could compare :highfive:
My kernel version is 3.0.8+ (at least that's what Settings -> About Tablet says)
I managed to install CWM 6.0.2 and reboot into it via the advanced power menu which is part of the GloveBox mod for Xposed Framework.
By default, you can't do anything except reboot the system by pressing the power button. BUT, if you plug in a USB keyboard into the tablet, you can select things using the arrow keys and use the Enter key instead of the tablet's power button. That way, you can do whatever you want in recovery mode. Only problem is that it keeps saying "E:Can't open /cache/recovery/log .... (and some few more lines that are simmilar)"
I got the files from here: http://forum.xda-developers.com/showthread.php?t=2189640
For mine it was the A13, 11 Partitions Zip.
I'll probably attempt to flash the Cyanogenmod 10 for A13 devices on it
Erm yep Bricked
I followed the instructions and everything but it went wrong I guess.
This is a no-frills thread.
Okay here it is.
cm_satsuki-Nega_Spork.zip
For dsds testing: cm_satsuki_dsds_test_boot.img Note: you will see the Sony Bootanimation instead of CM13, this is intentional. Also detection may take a minute or two. Provide clear reports.
For dsds model owners, flash rom clean, then in recovery reboot to bootloader and flash this test boot.img with fastboot
Code:
fastboot flash boot cm_satsuki_dsds_test_boot.img
fastboot reboot
NegaSpork
Working:
Sim [single]
Storage
NFC
Audio record fixed
The rest is the same.
What doesn't work:
Since the camera is still not "fixed" we will just say it doesn't work, deal with it.
Next on my todo list is fmradio
DSDS support is still being worked out by the project members. [see test boot image above]
NOTE: OpenGapps may bug out quickpanel/pulldown menu. This may be related to version used.
I experienced this with pico and nano. [see note below]
Click to expand...
Click to collapse
Thanks @KbaB.BroS for testing :good:
Everything from before works, cell, mobile data, nfc, etc.
Internet speeds are good.
It feels snappier than before, so smooth
The pulldown bar works, I can interact with the toggles without any force closes. If somebody complains about their devices, let them know to use OpenGAPPS. I use the mini version
Click to expand...
Click to collapse
Cyanogenmod Source
Thanks to/for
@CTXz Sources and convincing me to get a Z5P instead of another Sammy device.
Sony Kitakami Platform Developer Organization
@zacharias.maladroit For answering questions, many questions. :silly: [ still have more... xD ]
Those of you without a sense of humor, go away.
Okay current features i'm working on and stuff that works/doesn't work
UVC support enabled in kernel. probably need to build rom-side support still. libuvc avutils etc.
- This is for plugging in camera devices in conjuction with apps like LegitDashcam.
USB Gadget functionality as per pelya's work ,
- pelya/android-keyboard-gadget Use in conjuction with the include USB Keyboard app to utilize your phone as a keyboard/mousepad.
I am working my kernel source here toward net-huntery goodness.
The rest you tell me, and you tell me properly. Messages like
"waahhh my whatchamhoozit is all floompy"
are not acceptable.
This is not a random discussion thread either. Idle chatter belongs in general.
This is also NOT a discussion thread for Xposed,Viper, etc..
Thank you.
m
Notes and Updates
NOTE
I have been running this build for two days now and so far , meh it's alright.
Audio [mic] and Camera issues are definitely annoying.
SELinux is COMPLETELY disabled on this build. If You want security go back to stock.
SELinux enforcing is the goal though.
I strongly recommend using a "traditional" root os SuperSU over systemless-root.
Reasons:
Opengapps requires a factory-reset or fresh install to set up correctly!
Privacy Guard based root sucks. It forgets alot of permissions granted.
Use BETA-SuperSU-v2.52 , I wil attach below as it seems hard to find by conventional means.
Would have posted earlier but needed a smoke break *>cough<* :silly:
Updates and Notes
Reserved
Attached UPDATE-SuperSU-v2.46.zip for another option ,
since that worked the best for me in the past.
Thanks for the input. I get error: 7 to install the .zip file
any solution?
Rubensss said:
Thanks for the input. I get error: 7 to install the .zip file
any solution?
Click to expand...
Click to collapse
You need to use the recovery @moonbutt74 compiled from his other thread.
Sent from my Z5 Premium using XDA Labs
KbaB.BroS said:
You need to use the recovery @moonbutt74 compiled from his other thread.
Sent from my Z5 Premium using XDA Labs
Click to expand...
Click to collapse
Thanks , I have already installed.
@moonbutt74
Would be easier to keep the ROM as daily and test if it supported the dual sim version phones too
Apart from that, some of my observations during a small period of usage :
Pardon me if these are already mentioned.
Screen brightness doesn't reach full capacity
Speaker volume is low I think
For me, I felt the display had some slight glitches. Enabled GPU rendering in developer settings and felt it got better , can't guarantee on this though
Had to revert to stock based since sim functionality for me wasn't available ( I have a dual sim phone)
Ashray_Vk
Okay good deal, umm let me try compiling a seperate kernel package.
Yep brightness is currently HORRIBLE
I didn't notice any glitches display-wise, do you actually mean lag in some screen transitions?
I only tested with radioball and raging thunder.
The build i just tested out had full WOW, HOW THE HELL DO I TURN THIS DOWN BRIGHTNESS. :silly:
So either atm i get crappy brightness as max level which is like 75% of stock.
Or i get the nice stock brightness but the slider breaks/doesn't work.
The speaker volume is limited to where it actually should be. Use a mediaplayer that has an option for software decoding, that is a 100% [double] boost. It's not the idea to bomb out the speakers by default, each user can find their own tweak.
m
On the "daily build" thing, my upload time is horrible, so i will not be pushing out excessive/pointless builds. when i have something else fixed, then i will upload another build. Currently i'm boxing with the brightness issue and getting the mic working for audio recording.
moonbutt74 said:
Ashray_Vk
Okay good deal, umm let me try compiling a seperate kernel package.
Yep brightness is currently HORRIBLE
I didn't notice any glitches display-wise, do you actually mean lag in some screen transitions?
I only tested with radioball and raging thunder.
The build i just tested out had full WOW, HOW THE HELL DO I TURN THIS DOWN BRIGHTNESS. :silly:
So either atm i get crappy brightness as max level which is like 75% of stock.
Or i get the nice stock brightness but the slider breaks/doesn't work.
The speaker volume is limited to where it actually should be. Use a mediaplayer that has an option for software decoding, that is a 100% [double] boost. It's not the idea to bomb out the speakers by default, each user can find their own tweak.
m
On the "daily build" thing, my upload time is horrible, so i will not be pushing out excessive/pointless builds. when i have something else fixed, then i will upload another build. Currently i'm boxing with the brightness issue and getting the mic working for audio recording.
Click to expand...
Click to collapse
By screen glitches, I meant that I saw a few glitches when I scrolled down menus ( like even settings app).
Might be just my sleepy eyes too, lol. And in the beginning, everything was feeling laggy, till I enabled those GPU options in the developer settings and turned the screen off and turned it back on.
Don't rely on this data though, I hope someone else verifies this thing before you take it up as an issue .
-Ash
Ashray_Vk said:
By screen glitches, I meant that I saw a few glitches when I scrolled down menus ( like even settings app).
Might be just my sleepy eyes too, lol. And in the beginning, everything was feeling laggy, till I enabled those GPU options in the developer settings and turned the screen off and turned it back on.
Don't rely on this data though, I hope someone else verifies this thing before you take it up as an issue .
-Ash
Click to expand...
Click to collapse
No problem I'm just looking for clarification, are you talking about lag or screen tearing?
moonbutt74 said:
No problem I'm just looking for clarification, are you talking about lag or screen tearing?
Click to expand...
Click to collapse
There was lag in the beginning, no doubt. Lag was there since the boot animation itself.
Yes! Screen tearing is the term i was searching for. I felt like I saw minor issues of screen tearing along with the lag. ( especially when I scrolled down the settings )
I'm so sorry if I am not able to make things clear.
Nice. My question is does it work well with xposed? Other rom gives me random soft reboot randomly
Sent from my E6853 using XDA-Developers mobile app
Killastyle said:
Nice. My question is does it work well with xposed? Other rom gives me random soft reboot randomly
Sent from my E6853 using XDA-Developers mobile app
Click to expand...
Click to collapse
K,
right now we are working on an Alpha build, self evident in thread title. Xposed being superfluous/unecessary is not being discussed in this thread. Of course later on in the release/beta level thread it will most likely be covered.
@KbaB.BroS
On the good side got brightness and auto brightness sorted.
@Ashray_Vk , give me a bit on the dsds kernel, from what I'm understanding SS an DS were supposed to have been combined, so I am running a fresh build after resync, which on my comp will take a day :silly: adn probably not as long as the actual upload
:laugh:
m
moonbutt74 said:
K,
right now we are working on an Alpha build, self evident in thread title. Xposed being superfluous/unecessary is not being discussed in this thread. Of course later on in the release/beta level thread it will most likely be covered.
@KbaB.BroS
On the good side got brightness and auto brightness sorted.
@Ashray_Vk , give me a bit on the dsds kernel, from what I'm understanding SS an DS were supposed to have been combined, so I am running a fresh build after resync, which on my comp will take a day :silly: adn probably not as long as the actual upload
:laugh:
m
Click to expand...
Click to collapse
Normally, if I'd flash a stock based ROM which was meant for single sim, one sim would work in the dual sim models but the memory card would be not detected . sadly, that wasn't the case with cm though. Not even a single sim gets detected.
Ashray_Vk said:
Normally, if I'd flash a stock based ROM which was meant for single sim, one sim would work in the dual sim models but the memory card would be not detected . sadly, that wasn't the case with cm though. Not even a single sim gets detected.
Click to expand...
Click to collapse
you tried enabling only single SIM mode in Sony's (or other) "Stock" ROM and then flashing this ROM ?
Then at least one SIM might work - unless of course the Z5 devices handle things entirely differently
zacharias.maladroit said:
you tried enabling only single SIM mode in Sony's (or other) "Stock" ROM and then flashing this ROM ?
Then at least one SIM might work - unless of course the Z5 devices handle things entirely differently
Click to expand...
Click to collapse
Um, actually, was running rom aur and then had disabled one sim ( just because i didnt want to use that sim) and then had flashed this.
Unfortunately, not even a single sim worked in this.
Killastyle said:
Nice. My question is does it work well with xposed? Other rom gives me random soft reboot randomly
Sent from my E6853 using XDA-Developers mobile app
Click to expand...
Click to collapse
No problem with XPosed for some time here
Updated Build
CM13 Z5P E6853 Somehwere in Alpha -- Updated DragonLady
see OP , OH! and READ IT. grrrrrrr
Please verify communications are functioning, sim detection, in-call mic working etc.
Is your model SS or DS? Please state model number.
Brightnes and auto brightness should be fixed.
External storage fixed
Re-introduced kcal support in kernel
Included system apps [free, and free versions] - as we are testing , some creature comforts.
Adaway.apk
HKB.apk <--- hacker's keyboard
HKNDCTRU.apk <--- hacker's keyboard cyrillic/russian support
KernelAuditor.apk
NetworkDiscovery.apk <--- fairly useful network discovery app, find it on fdroid
NovaLauncher.apk
OpenCamera.apk
PicuriRam.apk
Quickpic.apk
Rebooter.apk
Superuser.apk <--- enable developer options and root access via that way first, then run supersu and update.
Terminal.apk < jackpal terminal
TotalCommander.apk
USB-Keyboard.apk
USBKB.apk < this one and the one above are the same app, i dun goofed.
Wifitoggle.apk
i am working a vanilla cm13 as well as my own custom build in the same turn, the custom utility in sbin is ccrypt, if you want to know how to use it, pm me and i'll give you a break down. do not use it to encrypt a block device !! single files only, and do not use a generated key, use a memorizable alpha-numeric password, else leave it alone.
m
@zacharias.maladroit WHAT HAPPENED TO PERRY !?!?!?!? :crying:
@moonbutt74
I'm sort of wiping the slate clean in several areas of my life - and that (unfortunately) was part of it :angel:
VRHeads has posted a method to enable Daydream on non-daydream phones. (Nougat and Root required).
www.vrheads.com/how-manually-enable-daydream-phones-google-has-not-approved
Enjoy - click thanks if i helped.
Tested it on Nexus 5 and LineageOS, and it actually works.
Of course loading times and performance lack a bit, but it still works more or less on an enjoyable level, controller pairs and works nicely, etc. Could be handy for testing, cool stuff.
Not able to make it work on nexus 5
Hii i tried to make daydream work on my nexus 5... I followed all the steps properly..but still im getting app stopped error when i actually tries load...i mean after (press n hold home button in emulator) im getting this error...please help...also please let me knwo if you have overclocked your cpu...im running on android 7.1.2 aosp (santhosh rom)
This preview of the Oreo build is updated with the March 2018 security patches. It is Android Oreo, version 8.1. If you want to use this, keep in mind that this is a development preview! It is not the final release. There are also a few things to note about using it.
It requires you to be bootloader unlocked (unlocking wipes your phone)
This update will wipe your phone even if you're already unlocked
You will not get any OTAs while on this build
VoLTE and WiFi Calling might not work
No CTS, so Android Pay/Pokemon Go may not work
May be some undocumented bugs
If you're fine with all of that, then the download link can be found on Razer's developer page about the update.
If you want to go back to the stock Nougat images, just follow the instructions here.
If anyone does this can they show us some videos
iStasis said:
If anyone does this can they show us some videos
Click to expand...
Click to collapse
Look up a video of Oreo on a Pixel. It looks exactly the same.
No default white theme like normal Oreo same default theme as nougat.
Screen now has a colour option which can be set to show more vibrant colours.
Double tap to sleep (only on lockscreen)
Speakers seem louder than before.
And all the normal Oreo stuff
Also Pokémon go does work.
Roxas598 said:
No default white theme like normal Oreo same default theme as nougat.
Screen now has a colour option which can be set to show more vibrant colours.
Double tap to sleep (only on lockscreen)
Speakers seem louder than before.
And all the normal Oreo stuff
Also Pokémon go does work.
Click to expand...
Click to collapse
Color options and more power for the speakers are both great news. Much excited.
I'm tinkering with GSIs and I've realised you can go into Download Mode by tapping the Power button several times as soon as the Razer logo pops up (before the orange 'tampered' message appears).
In case that helps someone ^
linuxct said:
I'm tinkering with GSIs and I've realised you can go into Download Mode by tapping the Power button several times as soon as the Razer logo pops up (before the orange 'tampered' message appears).
In case that helps someone ^
Click to expand...
Click to collapse
I wonder if there's a way of doing that with maybe the volume buttons to go directly into recovery as well ?
Roxas598 said:
No default white theme like normal Oreo same default theme as nougat.
Screen now has a colour option which can be set to show more vibrant colours.
Double tap to sleep (only on lockscreen)
Speakers seem louder than before.
And all the normal Oreo stuff
Also Pokémon go does work.
Click to expand...
Click to collapse
How would you rate the new colors, I've always felt the display was a tiny bit washed out
need help
im trying to update my phone, but when i run the flash_all command, its says waiting for device and stays there for ever, now it has more than 30 minutes with no sign of working
Horuhe93 said:
im trying to update my phone, but when i run the flash_all command, its says waiting for device and stays there for ever, now it has more than 30 minutes with no sign of working
Click to expand...
Click to collapse
Install Android USB driver
hello5629 said:
Install Android USB driver
Click to expand...
Click to collapse
ADB reboot bootloader then the flash all bat
i tested oreo and it looks very good,but until official release i reflashed the noughat stock img and now my sim wont recognise any help
please
parky169 said:
i tested oreo and it looks very good,but until official release i reflashed the noughat stock img and now my sim wont recognise any help
please
Click to expand...
Click to collapse
It did the same thing to me when I flashed stock nougat to fix boot loop. Remove and reinstall the Sim card. That worked for me.
Anyone having Bluetooth mic issues on this preview?
Just got a new BT headset with a built in mic and it ain't working. Just thought I'd check in here before returning it.
I went back to Nougat but did anyone else notice the screen colours go between vibrant and normal all the time? noticed it on the lockscreen, Keyboard and quick toggles but it only seemed to happen with colourful stuff. Default Razer wallpaper, Coloured keyboard and theme applied etc
Yes @Roxas598 I did notice the colors change from vibrant to normal a lot. And I've been watching Netflix on it lately as well and have been watching the second season of a series of unfortunate events and the whole show has been looking darker than it should, making it hard to watch even with brightness all the way up.
AwesomeFabe said:
Yes @Roxas598 I did notice the colors change from vibrant to normal a lot. And I've been watching Netflix on it lately as well and have been watching the second season of a series of unfortunate events and the whole show has been looking darker than it should, making it hard to watch even with brightness all the way up.
Click to expand...
Click to collapse
I already reported the issue but wanted to make sure it wasn't just me. Thanks!
My Fitbit is not being recognised at all, and my bluetooth mic on my new headphones doesn't work. So it looks like there are some issues with Bluetooth which I'll revert to stock to resolve. Not bad so far, but obviously being close to stock means it doesn't feel much different to 7.1, certainly not enough that you get that excited buzz we once got back when Android revisions were massively different.
Literally got everything working
joemossjr said:
Literally got everything working
Click to expand...
Click to collapse
How did you do this? I'd like to know since I'd like to use Netflix and Google Pay.
Hi Guys,
Some of you may remember me if you had a Galaxy S9 or Note 10... I rooted my Note 10+ 5G (N976B) Last night and decided to try and have a stab at getting stock android on there by means of project treble. This is a Semi Generic System Image - meaning it's been/being enhanced specifically for our note devices and less focused towards being cross compatible with other devices.
If you have already tested the existing treble roms you'll know that the back lighting doesn't work and you can't adjust brightness. I've had a play around and I've got a working Android 10 AOSP build with fully working backlighting. I thought I'd share as I'd seen a few people who said they can't get GSI's working.
Download System Image
Gapps are included, the image is not rooted. You can flash Magisk yourself.
How to flash:
Make sure you're on a stock based rom (and rooted/twrped) Dr Ketan posted a good guide for this.
Download the System Image above
Reboot to TWRP
Select Wipe
Slide the bar across the bottom of the screen
Go back to the main TWRP menu and select install
Press "Install Image" at the bottom right.
Select the system image you downloaded and swipe to flash.
Once the GSI boots perform another reboot - for some reason the navbar doesn't start up on first boot.
What's working and not working:
Obviously you lose S-Pen functionality, but can still use it as a stylus. You also lose the ability to use your telephoto and telescopic lenses.
UltraSonic Fingerprint isn't working at the moment, but I'm looking into fixing that.
How can you help me?
Let me know how it's working for the different device models. People on other versions please can you let me know your device vendor fingerprint. (to do this On your device, in adb or Termux app use this command: getprop ro.vendor.build.fingerprint)
Credits:
phhusson - for all the project treble work, this is all thanks to him.
Please please support N976n. ???
xshaowenruix said:
Please please support N976n.
Click to expand...
Click to collapse
It should work, it's semi generic. Give it a try and let me know if it works.
If it doesn't I'll need your device fingerprint.
Good work!
Nice ... you stared to work whit the N10+ , still remember havoc in my N9 was a great time , keep goin Fox
@CodeFox. Thank you so much for your work with this! I booted successfully into Android 10 which is awesome. Installing Magisk was successful as well. Do you have any plans to add mods to this?
Welcome aboard
carandcar said:
@CodeFox. Thank you so much for your work with this! I booted successfully into Android 10 which is awesome. Installing Magisk was successful as well. Do you have any plans to add mods to this?
Click to expand...
Click to collapse
Glad to hear it worked for you - can I ask what specific device you're using?
No mods to this really, but right now I'm compiling a AEX pie based sGSI which I'm hoping should have some more improved functionality and potentially the fingerprint sensor working. There's no reason to mod bog standard Android 10, may aswell just use custom roms.
CodeFox said:
Glad to hear it worked for you - can I ask what specific device you're using?
No mods to this really, but right now I'm compiling a AEX pie based sGSI which I'm hoping should have some more improved functionality and potentially the fingerprint sensor working. There's no reason to mod bog standard Android 10, may aswell just use custom roms.
Click to expand...
Click to collapse
I have N975f. I understand what you mean about keeping it pure. I just like to be able to change the look up. ? Thank you again for bringing this to us.
I managed to get fingerprint working
I seem to have gotten it working by doing a fresh reset, flashing this version of gapps (https://forum.xda-developers.com/android/software/arm64-bitgapps-q-10-0-0-t3968500), wiped cache/dalvik then rebooted. i dont know if it made a difference or not but i also held my thumb on the sensor for extra long during the initial set up. Did it on N975F
Jamjarr said:
I seem to have gotten it working by doing a fresh reset, flashing this version of gapps (https://forum.xda-developers.com/android/software/arm64-bitgapps-q-10-0-0-t3968500), wiped cache/dalvik then rebooted. i dont know if it made a difference or not but i also held my thumb on the sensor for extra long during the initial set up. Did it on N975F
Click to expand...
Click to collapse
Hmm, Interesting. I will look into it. Thank you.
Thanks (and a quick question)
Thanks for the rom! This works for me on an N975F, including the fingerprint sensor. The only slight nit I have with it is that I can't figure out how to get rid of the cursor showing up on the screen when I use the stylus. Is there any chance there's a way to hide the cursor, or if it can be added? I don't use any other external input devices ever, so I'd be fully satisfied with a way to just disable the cursor globally on my device.
saghm said:
Thanks for the rom! This works for me on an N975F, including the fingerprint sensor. The only slight nit I have with it is that I can't figure out how to get rid of the cursor showing up on the screen when I use the stylus. Is there any chance there's a way to hide the cursor, or if it can be added? I don't use any other external input devices ever, so I'd be fully satisfied with a way to just disable the cursor globally on my device.
Click to expand...
Click to collapse
Was there any trick to getting the fingerprint to work?? I've had no joy with it. As soon as I try to register my fingerprint it says there was an enrolment error.
Would this gsi theoretically also fix the s10's brightness issue too?
CodeFox said:
Was there any trick to getting the fingerprint to work?? I've had no joy with it. As soon as I try to register my fingerprint it says there was an enrolment error.
Click to expand...
Click to collapse
It did this to me too when I was first setting up the phone, but after it was all set up, I went into the settings to try again, and it worked that time. It didn't show the fingerprint logo during this setup (and it still doesn't on the lock screen), but after a couple tries I was able to estimate correctly where the sensor was. Interestingly, the fingerprint logo does come up in the password manager app I use when I go to unlock it.
Not sure if there are logs that would help or if recording my screen while adding a new fingerprint would be informative, but I'd be happy to do either if that helps you debug in some way.
saghm said:
Thanks for the rom! This works for me on an N975F, including the fingerprint sensor. The only slight nit I have with it is that I can't figure out how to get rid of the cursor showing up on the screen when I use the stylus. Is there any chance there's a way to hide the cursor, or if it can be added? I don't use any other external input devices ever, so I'd be fully satisfied with a way to just disable the cursor globally on my device.
Click to expand...
Click to collapse
DBDPCG said:
Would this gsi theoretically also fix the s10's brightness issue too?
Click to expand...
Click to collapse
What's the issue with the S10? The backlight doesn't work?
CodeFox said:
What's the issue with the S10? The backlight doesn't work?
Click to expand...
Click to collapse
As I've heard, haven't tried it yet though
DBDPCG said:
As I've heard, haven't tried it yet though
Click to expand...
Click to collapse
For what it's worth, all the other GSI's I've tried for the Note 10+ weren't able to adjust the backlight; this is the first one where it just worked. I don't have an S10 to try this out on though, so I have no idea how this ROM would run on it.
LTE working despite phone claiming 3G
One thing I've noticed with this ROM is that the phone claims that it's always only getting 3G rather than LTE and has no bars; however, from doing a speed test on data (with wifi turned off, of course), I got around 8.5 Mbps down, which from a quick Google seems to be will beyond 3G range and into the range that LTE would give. If anyone else thinks they are having issues with getting LTE, I suggest doing a speed test, since you might actually be getting it despite what the phone reports.
saghm said:
One thing I've noticed with this ROM is that the phone claims that it's always only getting 3G rather than LTE and has no bars; however, from doing a speed test on data (with wifi turned off, of course), I got around 8.5 Mbps down, which from a quick Google seems to be will beyond 3G range and into the range that LTE would give. If anyone else thinks they are having issues with getting LTE, I suggest doing a speed test, since you might actually be getting it despite what the phone reports.
Click to expand...
Click to collapse
Go into your network settings and change the default connection from 3g to LTE/4G/3G.
For some reason it seems to default to 3g preferred.