Lenovo S10 android X86 - Android Software/Hacking General [Developers Only]

I've tested Android (2.2) Froyo on Lenovo S10 netbook. The generic stable release version of Android 2.2 (android-x86-2.2-generic.iso) does not work well at all. The problems are:
1. Screen Flickering
2. Feel slow for 1.6ghz cpu
3. no wifi
4. cannot wake-up from sleep despite holding down ESC or Arrow Keys
so I used IEEE PC version (android-x86-2.2-eeepc.iso), and found improvement. Screen stop flickering and feel fast. however, there are still no wifi and cannot wake-up from sleep. SD reader slot will not work, but instead it recognizes usb flash drive as SD card perfectly.
If anyone know how to get WIFI working or fix the sleep problem or any improvement on Lenovo S10 running Android Froyo, please post. Thanks
You can find full info about this project at
android-x86 dot org

anyone faces the same issue? pls respond. thanks.

I think 1.6 is the only stable x86 Android version there is.

android 1.6 able to use wifi on Lenovo S10? or only some specific netbook?

Same issues here. I hope that this will improve or even that they manage to port honeycomb to it.
What about forums on x86 android? Imagine having cooked roms for your laptop

hi. help
how to root android android-x86-2.2-r2
(android-x86.googlecode.com/files/android-x86-2.2-r2-s103t.iso)
for lenovo s10-3t

I try both android-x86-2.2-generic.iso and android-x86-2.2-r2-s103t.iso on my Lenovo S10-2 also not working too, keep screen flickering.
vinnyvinyny said:
I've tested Android (2.2) Froyo on Lenovo S10 netbook. The generic stable release version of Android 2.2 (android-x86-2.2-generic.iso) does not work well at all. The problems are:
1. Screen Flickering
2. Feel slow for 1.6ghz cpu
3. no wifi
4. cannot wake-up from sleep despite holding down ESC or Arrow Keys
so I used IEEE PC version (android-x86-2.2-eeepc.iso), and found improvement. Screen stop flickering and feel fast. however, there are still no wifi and cannot wake-up from sleep. SD reader slot will not work, but instead it recognizes usb flash drive as SD card perfectly.
If anyone know how to get WIFI working or fix the sleep problem or any improvement on Lenovo S10 running Android Froyo, please post. Thanks
You can find full info about this project at
android-x86 dot org
Click to expand...
Click to collapse

About which S10 you are talking about, S10, S10-2, S10-3...?
I own a S10 and I tested http://android-x86.googlecode.com/files/android-x86-2.3-RC1-eeepc.iso
Works well, no flickering and wifi is working.

I (and probably most of other people) am talking about S10-3t, which makes most sense to use android since it have touch screen.

s10-3t good work wish android-x86-2.2-r2-s103t.iso
1. Screen Flickering -( non flickering )
2. Feel slow for 1.6ghz cpu (work very fast, will start in 10 seconds with SSD)
3. no wifi (godd work after disable Ethernet card on Settings)
4. cannot wake-up from sleep despite holding down ESC or Arrow Keys (Yes, cannot wake-up, bat I solver this problem - Disable sleep screen)
for me an unsolved problem now
- keyboard Lenovo does not change modes English-Russian. only change mode En-Ru on screen keyboard
- and mini problem, all sites are loaded in the mobile mode, not very convenient.
PS. I formating android partition in EXT2 for SSD long life and fast work files system!!!! EXT2 no logging files system! for SSD and fast Read-Write it's good.

Related

Problems in Nokia 8 [Discussion Group]

Hi Nokia 8 user's ,
I have been hearing many complaints about Nokia 8,so I decided to create a thread where I can collect all the complaints about phone and try to find the solution to the problems.
Note ??
The major problems and suggestions go to the Nokia 8 feedback box.
Something's??
->? I use is
- Asus Pixel Master Camera(for Pro Mode & scenary pics)
-https://www.apkmirror.com/apk/zenui...mera-5-0-30-3_181011_5m-android-apk-download/
-Google Camera(Selfies,human pictures)
Please note: Slow motion is not working!!
It's a bit too big for me?
My only complaints are since almost a year of using Nokia 8: LCD burn in is so goddamn bad, even my 3 years old Galaxy Note 4 hasn't have any burn ins, and fingerprint scanner is a bit too small so you might miss a few times. Oh and stock camera app is so so at best, GCam FTW
uchihakurtz said:
My only complaints are since almost a year of using Nokia 8: LCD burn in is so goddamn bad, even my 3 years old Galaxy Note 4 hasn't have any burn ins, and fingerprint scanner is a bit too small so you might miss a few times. Oh and stock camera app is so so at best, GCam FTW
Click to expand...
Click to collapse
I have mailed the Nokia team and they asked to install app to fix it like LCD burn in wiper.
Then I also want to write down my "problems":
- Since the update to Pie I have no Bluetooth connection to the Smartwatch (Ticwatch E, Wear OS 2.2)
Resetting to factory settings did not change the problem. Neither the clock nor the phone.
- During any execution of an app, the screen suddenly stops gesturing. Swiping or pressing buttons is no longer possible. This occurs about 4-5 times a week. The only solution: Reboot the device via Volume + Power Button.
Adoptable storage
What about not being able to use SD cards as adoptable / internal storage? Has anyone tinkered with or fixed this yet?
I am on my 2nd brand new 8 in a week and neither work for handsfree loud speaker calls. On Oreo, tried resetting both. No change
taiwaneeze said:
What about not being able to use SD cards as adoptable / internal storage? Has anyone tinkered with or fixed this yet?
Click to expand...
Click to collapse
It's bound to software essentially. Many apps from Google play store automatically choose SD card as storage for OBB files. If you want to enforce everything to be installed on a ticking bomb then you are free to do it with magisk modules at absolutely no effort.
KonikoO said:
It's bound to software essentially. Many apps from Google play store automatically choose SD card as storage for OBB files. If you want to enforce everything to be installed on a ticking bomb then you are free to do it with magisk modules at absolutely no effort.
Click to expand...
Click to collapse
From what I gather from doing research it sounds like you would need to do a system reset and then disable FBE (file based encryption) as this is the reason why using an sd card as internal storage does not work with the N8.
Sounds like the way to do this is to do it through a modified TWRP/boot image. Just wondering if anyone has done it yet. Was thinking of making a forum discussion about it. I get your point, but in the interest of development and utilization of a device to its fullest potential (aka the ability to move apps to the disk in the interest of increased storage/backup), I also think this feature would be welcome.
Magisk has this functionality? I just got my N8 last week and am playing with all this stuff, just sideloaded on the pie update but havent rooted or flashed a rom yet in the interest of keeping things mostly stock. If Magisk has the functionality then cool, just think it would be interesting to create a custom ROM/tweak to have the functionality to store and use the apps from SD as well as the onboard.
My complaints so far:
- no notification light
- sound quality very poor when making a call
- laggy performance sometimes
- fingerprint scanner too small
- on the Pie beta: rebooting the phone erases the registred fingerprints sometimes
- camera slow and unreliable
the one and the most annoying issue i have with this phone is : the screen sometime half dead ( artifact ) =))) just a normal day , woke up , check the time on phone , and wow !!!!!! the screen half dead =)) , waste a lot of time for replacement ...
paeschli said:
My complaints so far:
- no notification light
- sound quality very poor when making a call
- laggy performance sometimes
- fingerprint scanner too small
- on the Pie beta: rebooting the phone erases the registred fingerprints sometimes
- camera slow and unreliable
Click to expand...
Click to collapse
The official update is out rollback to Oreo and update to android pie officially.
My GPS is not working after upgrading to Android Pie. Cannot lock to any satellite. Just wondering if anyone got the same issue.
hkxforce said:
My GPS is not working after upgrading to Android Pie. Cannot lock to any satellite. Just wondering if anyone got the same issue.
Click to expand...
Click to collapse
I also have the same problem still finding the solution.....
Aryavart said:
I also have the same problem still finding the solution.....
Click to expand...
Click to collapse
I did a factory reset this morning. So far the GPS is working normal again. Will keep checking if problem appears again.
The charging problem still remains, after charging by original charger, it will stop charging after a few seconds. Any solution? No, clear cache, storage and soft reset is not solution.
hkxforce said:
I did a factory reset this morning. So far the GPS is working normal again. Will keep checking if problem appears again.
Click to expand...
Click to collapse
For me is whenever I am on my home WiFi it shows me different location and when I am outside on gps it shows my accurate position...
pepino34 said:
The charging problem still remains, after charging by original charger, it will stop charging after a few seconds. Any solution? No, clear cache, storage and soft reset is not solution.
Click to expand...
Click to collapse
I have had charging problems a few times. Charging stops after a few seconds or charging is intermittent.
Solved it with compressed air
The cause was cruft in the usb-c port. Pocket lint get pushed down and accumulated in the bottom of the port.
Try to blow it out or use something thin and non-conducting (toothpick?) to get it out.
Has anyone faced camera blur problem??

Android Q Desktop Mode

Hello Community.
As any of you who did some tests know it is in early state. I am wondering is it not to popular topic? Since I have switched from Galaxy S8+ and I was using Dex OS everyday, it is the feature I miss the most.
I think that it also gives a lot of possibilities for anyone who travels a lot. It is very nice to have a "desktop" in a hotel room on which you can answer emails, or brows internet in desktop mode. All you need is only keyboard, mouse and usb-c to hdmi cable and of course your phone.
I have just tested new Desktop Mode on Android Q(OnePlus 7 Pro) and what can I say?
Not to much.
And here is my question. Does anyone know about some development which is likely in progress or maybe there is any option to port Samsung's Dex OS to other phones?
All I have found is only one guy: Daniel Blandford:
https://www.youtube.com/watch?v=Fj2P0omAkek
and what he is showing looks very promising, but still it is only one guy?!?
My dream and ideal solution was razer's project project Linda
https://www.youtube.com/watch?v=5gKu-T13vXs
which was promised to be released along with Razer Phone 2 but in the end was killed.
There is some other solution to lapdocks but for me not to ergonomic in terms of mobility.
I believe that Android as a daily OS is possible and I hope that it will go live soon.
Same here. I tried it, have Bluetooth mouse and foldable keyboard, and really liked how snappy it is! However, there's no way to adjust resolution or font size, which would be the first step toward something really usable. I would like to test the limits of any solution, whenever available.
I discussed with Daniel Blandfort and he told me he currently stopped development of his Flow Desktop because he could not raise any interest and get enought Patreons to keep going unfortunatelly...
Maybe you can use Sentio desktop on your oneplus ? I think it looks better than the current raw android 10 desktop.
Something looking really neat I found is Keydock. It's basically a keyboard-docking station to use desktop mode.
Mod edit: Link removed!
There's a website (Mod edit: Link removed!) where they try to get enought suscribers to launch Keydock on kickstarter
Sentio was a good find and worth trying. However, it didn't work for me. Also, it seems that work on Sentio stopped. Last update was someone last year.
PaddleStroke said:
I discussed with Daniel Blandfort and he told me he currently stopped development of his Flow Desktop because he could not raise any interest and get enought Patreons to keep going unfortunatelly...
Maybe you can use Sentio desktop on your oneplus ? I think it looks better than the current raw android 10 desktop.
Something looking really neat I found is Keydock. It's basically a keyboard-docking station to use desktop mode.
Mod edit: Link removed!
There's a website (Mod edit: Link removed!) where they try to get enought suscribers to launch Keydock on kickstarter
Click to expand...
Click to collapse
Flow desktop looked awesome, it's a shame if development really has been discontinued.
I wonder how it would have worked, would it have been a custom rom or an app
Skickat från min GM1913 via Tapatalk
https://play.google.com/store/apps/details?id=com.kairos.duet
There is new project named Nexdock. Looks very promising. It's basically a laptop without CPU, GPU. All is based on the phone connected via USB-C cable.
http://nexdock.com/touch/
Here is TK Bay testing this with OnePlus 7 T Pro McLaren
starts at 6:22
But as he mention on his video, OnePlus (Android Q) is still not ready as a full desktop mode (resize open apps, etc), it looks more like basic android desktop.
NexDock with OP 7T Pro McLaren Edition
About a week ago I received my new Nexdock Touch. Great build quality, looks similar to Macbook Air.
Only issue I have found, is a problem with connection and starting Desktop Mode. It sometimes start charge the phone instead lunching Desktop Mode. But when connected, the phone wont charge anymore.
Looks like there is a order in what to connect first, Lapdock with cable, than phone with locked screen.
What works:
+ touch screen
+ tauchpad
+ sound
+ most of the buildin OxygenOS apps
What don't work:
- dimming phone screen, to save battery
- charging the phone while connected
- some other/additional installed apps (like ES Explorer, All in one Toolbox)
- Nova Launcher on extended screen
Some of the issues can be fixed with Taskbar 6.0. This will add additional taskbar on the extedned screen, will fix the issue with dimming phone display to preserve battery.
Taskbar 6.0 with some extra features explained here.
When Camera app is open on the phone, everything slows down, phone is laggy and slow. Word and Excel seems to be in mobile mode, as all is very large on external screen.
This mode helps to improve security, as all data is on one device - mobile phone. This is handy when I'm working in the car, or I need to send email with invoice or even play PUBG
Overall, Desktop Mode is amazing experience, it shows how powerful OnePlus 7T Pro is.
Please add thumb up at OnePlus Ideas 2 for expanding Desktop Mode!
koliberk said:
About a week ago I received my new Nexdock Touch. Great build quality, looks similar to Macbook Air.
Only issue I have found, is a problem with connection and starting Desktop Mode. It sometimes start charge the phone instead lunching Desktop Mode. But when connected, the phone wont charge anymore.
Looks like there is a order in what to connect first, Lapdock with cable, than phone with locked screen.
What works:
+ touch screen
+ tauchpad
+ sound
+ most of the buildin OxygenOS apps
What don't work:
- dimming phone screen, to save battery
- charging the phone while connected
- some other/additional installed apps (like ES Explorer, All in one Toolbox)
- Nova Launcher on extended screen
Some of the issues can be fixed with Taskbar 6.0. This will add additional taskbar on the extedned screen, will fix the issue with dimming phone display to preserve battery.
Taskbar 6.0 with some extra features explained here.
When Camera app is open on the phone, everything slows down, phone is laggy and slow. Word and Excel seems to be in mobile mode, as all is very large on external screen.
This mode helps to improve security, as all data is on one device - mobile phone. This is handy when I'm working in the car, or I need to send email with invoice or even play PUBG
Overall, Desktop Mode is amazing experience, it shows how powerful OnePlus 7T Pro is.
Please add thumb up at OnePlus Ideas 2 for expanding Desktop Mode!
Click to expand...
Click to collapse
@koliberk
mind giving tips?
i have the oneplus 7 pro and couldnt get keyboard/trackpad/touch to work
:|
lastdemonz said:
@koliberk
mind giving tips?
i have the oneplus 7 pro and couldnt get keyboard/trackpad/touch to work
:|
Click to expand...
Click to collapse
Do you have Nexdock Touch? If so, I have the same problem when connecting cable to Nexdock and than to my phone.
Desktop mode won't turn ON, only I have charging in progres with external screen connected, nothing else works.
So to solve this issue , I need to disconnect the phone by the time charging is started. Than plug the cable back. This may take a moment and few times to unplug and than plug back. Until the charging of the phone won't start, than if you leave it plugged, all start to work.
This must be an issue with Desktop Mode in development state.
koliberk said:
Do you have Nexdock Touch? If so, I have the same problem when connecting cable to Nexdock and than to my phone.
Desktop mode won't turn ON, only I have charging in progres with external screen connected, nothing else works.
So to solve this issue , I need to disconnect the phone by the time charging is started. Than plug the cable back. This may take a moment and few times to unplug and than plug back. Until the charging of the phone won't start, than if you leave it plugged, all start to work.
This must be an issue with Desktop Mode in development state.
Click to expand...
Click to collapse
I see.
we probably have a different type problem
because my problem isn't going to desktop mode but to make the keyboard,track pad and touch working
I get the taskbar desktop mode every time i plug it in but i cant interact with it :|
I hope you don't mind me asking but
what oxygen-OS version are you?
have you installed any custom roms/kernels on your phone?
lastdemonz said:
...
I hope you don't mind me asking but
what oxygen-OS version are you?
have you installed any custom roms/kernels on your phone?
Click to expand...
Click to collapse
I'm have xXx_NoLimits_12 on OxygenOS 10.0.11 HD01BA.
Did you turn these three options in the development mode?
koliberk said:
I'm have xXx_NoLimits_12 on OxygenOS 10.0.11 HD01BA.
Did you turn these three options in the development mode?
Click to expand...
Click to collapse
yeah i did turn those options
it might be the version i am using 10.3.5.GM21AA
lastdemonz said:
yeah i did turn those options
it might be the version i am using 10.3.5.GM21AA
Click to expand...
Click to collapse
This means you have OP7 Pro, right? Not the OP7T Pro
Could be an issue with development state of your Desktop Mode. Try different cable or check if your phone is compatible with connecting keyboard/touchpad through USB-C port.
koliberk said:
This means you have OP7 Pro, right? Not the OP7T Pro
Could be an issue with development state of your Desktop Mode. Try different cable or check if your phone is compatible with connecting keyboard/touchpad through USB-C port.
Click to expand...
Click to collapse
it should be the same as yours because their have the same type of hardware
i dont really have another cable so i cant tell but i do see similarities with people on the internet about Oneplus phones not working with it for example check this youtube channel
i have the same problem as him
ill try installing your firmware it might do the trick
lastdemonz said:
it should be the same as yours because their have the same type of hardware
i dont really have another cable so i cant tell but i do see similarities with people on the internet about Oneplus phones not working with it for example check this youtube channel
i have the same problem as him
ill try installing your firmware it might do the trick
Click to expand...
Click to collapse
I have very similar issue. First thing after connecting my NexDock Touch, phone starts to charge, than there is no way I can use keyboard, touchpad or touch screen. No any key on the keyboard works, so no dimming the screen, no volume, no caps lock. Only there is a desktop on external screen.
So I need to unplug the phone and connect it back. After few times, with locking the phone and unlocking, connecting the cable and than disconnecting, Desktop Mode starts to work with all peripheral coming with NexDock Touch.
But than, the phone wont charge anymore. So it's only charging the phone without interaction (external keyboard/touchpad/touch screen) or no charging with everything working fine.
Another issue is Night Mode - https://www.youtube.com/watch?v=Tx3ZqPJeoPs
koliberk said:
I have very similar issue. First thing after connecting my NexDock Touch, phone starts to charge, than there is no way I can use keyboard, touchpad or touch screen. No any key on the keyboard works, so no dimming the screen, no volume, no caps lock. Only there is a desktop on external screen.
So I need to unplug the phone and connect it back. After few times, with locking the phone and unlocking, connecting the cable and than disconnecting, Desktop Mode starts to work with all peripheral coming with NexDock Touch.
But than, the phone wont charge anymore. So it's only charging the phone without interaction (external keyboard/touchpad/touch screen) or no charging with everything working fine.
Another issue is Night Mode - https://www.youtube.com/watch?v=Tx3ZqPJeoPs
Click to expand...
Click to collapse
well atleast it works
imagine being stuck with this device and you cant properly interact with it :|
and tbh i dont really know how to downgrade to your version
lastdemonz said:
and tbh i dont really know how to downgrade to your version
Click to expand...
Click to collapse
Not sure if you can do that, I'm on the newest firmware on my OP7T Pro McLaren 4G.

			
				
koliberk said:
Not sure if you can do that, I'm on the newest firmware on my OP7T Pro McLaren 4G.
Click to expand...
Click to collapse
thats really weird
but the nex with oneplus looks amazing
i ordered an adapter (saw people getting it to work with )
i hope ill get it working
thanks for the information
if you find anything else please reply here so i know

System UI crashes in Bliss Os 12

The Bliss Os 12 is extremely cool and smart.
I ran it on my live PD and installed it however, I encountered a problem after going into it.
Bliss Os 12 (latest) Generic-intel, stops taking inputs in home screen.
The 3 main(back, home, apps) taskbar still works.
I can touch it and click it.
However the input will not work in the home screen.
If I try bring down the status bar which as the battery, aeroplane mode, etc. down, it shows error System has stopped working.
Every time.
So that is the problem
Windows 10 64-bit, intel i3, Lenovo Yoga laptop.
Same here.. I'm running on AMD Ryzen 3 3200G, and ASUS Prime A320M-K Motherboard with 8GB of RAM. I'm running it as a stand alone Device so, there is no dual boot in it.
Here's the logs that I got.
del.dog/ucucroghoc.txt

Android 10 v11.0.9 Bugs, Enhancements, Battery Life etc.

Android 10
Release date: Sunday, Aug 9th, 2020
Build Version: QKQ1.191002.002.V11.0.9.0.QDLMIXM
Kernel Version: 3.18.124-perf-gceec2f0
Bootloader Version: MSM8953_DAISY2.0_20200805174034
Baseband Version: 953_GEN_PACK-1.202044.1.240106.1,953_GEN_PACK-1.202044.1.240106.1
Android Security Patch Version: 1 July 2020
Please report bugs via Xiaomi's Feedback app.
How to Generate Bug Reports
Bugs:
1- [email protected] fps Video Recorder doesnt work on OmniVision OV12A10 Back Camera sensor. (Tap here for more info)
2- We still cant turn off Settings app suggestions.
3- Direct share feature doesnt work. It gives an error:
"Direct share is not available"
4- Multiple users experiencing installation problems. Source-1 Source-2
5- Sim card menu is still not adapted to the dark mode, it persists to be white while global theme is dark. Source 1 - Source 2 (Same as v11.0.5)
6- Splitscreen feature doesnt let us to fit video.
7- Ram management is still bad. When i switch to YouTube app from Firefox (with 1 page) LMK kills Firefox app from memory. It even restarts second Firefox page when i trying to select image file via default file manager.
8- I am experiencing a lot of glitches (most likely screen tearing) while scrolling with Firefox.
9- Some app services stucks on Restart state.
- diaglogger
- com.qualcomm.qti.workloadclassifier
- Simcontacts
- CallEnhancement
- com.qualcomm.atfwd
Reboot fixes all. Maybe these apps causes sluggishness. Maybe these apps Xiaomi's little secret. We dont know yet.
10- Still requires daily reboot to maintain its performance. If we dont device becomes sluggish.
Missing features:
N/A
Enhancements:
1- Fourth Stable Android 10 release.
2- It comes with July 2020 Android Security patch.
Battery Life:
N/A
Notes:
- This is the fourth stable Android 10 update for Xiaomi Mi A2 Lite.
- There was June 2020 Security patch in the third stable Android 10 update.
- Arrived 47 days later after v11.0.7
- It weights 180 MB for OTA.
- Xiaomi didnt updated the modem and gpu drivers(gpu driver is same -OpenGL ES 3.2 [email protected] ([email protected], Ieeb4a86f7b, 1573670678) (Date:11/13/19)- since first build) in this build so dont expect something new.
3DMark Test Results: (v2.0.4661)
Slingshot Extreme OpenGL ES 3.1 - Overall score 463
Slingshot Extreme Vulkan - Overall score 515
It will be beneficial to restart your phone after the first installation.
Older builds:
1 - Android 10 v11.0.4
2- Android 10 v11.0.5
3- Android 10 v11.0.7
I will constantly update this thread.
First of all, I changed my logic in which I do this updates. Last month I had my one and only random system reboot so I tried to give it a little thought on how I should update this system, and so far I had no problem with it: You see, Android 10 had quite a lot of bad, unresolved updates, especially for those who manage to have a "successful" day one update (this translates to those who didn't have a bricked device) so now, when an update comes, it just tried to patch the old broken version, with mixed results, and not completely over write it. Remember back in A9 age? When you'd miss an montly update, the next month your update size would be >1gb? That means the 2 version old android version wouldn't be compatible with the new build so it did a complete rewrite of the partition? This never happened on A10 since launch, so here's what I did, after that system crash I downloaded the 10.0.7 and flashed it twice (by rewriting twice it means this, flash, reboot, boot into system, shut down, recovery, flash again, reboot, boot into system) through recovery, thus rewriting both A and B partitions with a known "good" (it still has bugs, but it doesn't carry the day 1 or day 2 major bugs) firmware flash. Now the same happened with the new update the 11.0.9, copied to SD, flashed through recovery and here is my review.
The bug in which the 5G icon in the wi-fi menu wouldn't hold if connected to the network and turned into a 4G wi-fi network still stands. This is only a visual bug, since the 5G network is doing just fine.
Tested the camera extensively and now it has a more aggressive focus and it's sharp again, image size is now large, like before, quality is improved in daylight, but the low light still could use some improvement.
The "useless" cards in Settings menu are still there (I personally only have the Customize your pixel one).
There is now a smoother feedback in the haptic feedback, so sometimes it seems like it's not working, but it's me not feeling it.
The 4G speeds still seem to be low, but again, like I said last time it could be a problem from my network provider, so I can't be 100% sure.
The internal storage speeds seem more and more slow on the other hand, I can't get transfers over 30mb/s on the internal storage, weird, because on .7 I could go over 100mb/s without a problem.
The RAM management is weird, after flashing the phone "my way", I can open ALL of the phone's apps and they'd stay up and running in the RAM until the phone starts going so sluggish that's almost a burden to use. It doesn't selectively remove apps from ram until closed from the recent menu. It isn't a problem for 5-10 apps open at once, but it starts getting weird after 30-40. Also the background apps are killed after a specific time, not by RAM usage which is counter intuitive... damn.
The MTP - SD card is still faulty. Refuses to display contents of large folders unless plugged out and plugged back in again. At least it's not crashing transfers right now.
The Media scanner is still faulty, after copying data to SD card they won't display in the specific apps (Google Photos, Google Music) but if manually searched (for example in my case Hiby Music) they're there and they can be used. Only reboot fixes this problem.
Direct Share is still not working.
This is all I had to say about the new .9 update, the rest of the more extensive things I covered can be found in the 11.0.7 thread, and it wasn't productive to write them here again, since the experience didn't change.
Battery seems a little worse than 11.0.7 but that was just the first day of testing, so it's irrelevant for most real world situations.
Other than the new method of installing and the few problems that seems odd to me, I can't report anything else after 1 day of usage. It's more usable, but it still have it's quirks... at least they didn't break anything else this time.
Yup.. Day two ram managent is getting as you described.. Still the device seems working better..
Update: generally better but still ram gets full after a couple of days. Still needs to reboot to fix the issue and clean the memory.
I think it's unbelievable that 4gb of ram are not enough to run this system.. There must be some bad development.
Not seeing "Some app services stucks on Restart state".
I can confirm you that the app you have mentioned in 9 are causing the device to slow because if you restart the app and then force stop them via hibernator Pro your phone who don't feel slow until they start again
I'm still having memory issues on my 4GB RAM model. Chrome tabs usually reload when switching back from another app even if I only have 1 tab open. The Google feed on the left of the main screen also reloads constantly. Those things didn't happen on android 9, I was able to seemingly switch between apps.
ema93a said:
I'm still having memory issues on my 4GB RAM model. Chrome tabs usually reload when switching back from another app even if I only have 1 tab open. The Google feed on the left of the main screen also reloads constantly. Those things didn't happen on android 9, I was able to seemingly switch between apps.
Click to expand...
Click to collapse
Same. I cant even download Call Of Duty: Mobile if i wont stay on Google Play Store app. Play Store downloads it %99 and if i switch to another app LMK kills the download process and then i am switching back to Play Store app it starts downloading from %0.
perfect_ said:
Same. I cant even download Call Of Duty: Mobile if i wont stay on Google Play Store app. Play Store downloads it %99 and if i switch to another app LMK kills the download process and then i am switching back to Play Store app it starts downloading from %0.
Click to expand...
Click to collapse
Lspeed fixes it
I had issues when multitasking Youtube and Opera/Chrome. It lagged until starting to freeze the browser, requiring me to press home and go back to browser. In some ocasions, the device restarted, maybe when ram got full or somehow corrupted.
After months in this situation, I gave up the once beloved Android One for the MIUI port HybridOS. After flashing this rom my device is completely different, more responsive, much less laggy, battery charges much more faster, and drains a lot less. The difference is like water turned into wine. Not to mention better camera quality (much better!), and the ability to record internal audio from everything (thanks to MIUI). I'm happy with my device again.
Sir waiting for 11.0.10.0 review
dplc81 said:
I had issues when multitasking Youtube and Opera/Chrome. It lagged until starting to freeze the browser, requiring me to press home and go back to browser. In some ocasions, the device restarted, maybe when ram got full or somehow corrupted.
After months in this situation, I gave up the once beloved Android One for the MIUI port HybridOS. After flashing this rom my device is completely different, more responsive, much less laggy, battery charges much more faster, and drains a lot less. The difference is like water turned into wine. Not to mention better camera quality (much better!), and the ability to record internal audio from everything (thanks to MIUI). I'm happy with my device again.
Click to expand...
Click to collapse
Hi
Are you still on that version ?
How has it been I'm tempted as my phone's so slow now I'm still on stock.
Do the banking apps work ok as that's my main worry for changing as I need them.
Do you have a link for your version I can't seem to find it.
Thanks
steve.loveday said:
Hi
Are you still on that version ?
How has it been I'm tempted as my phone's so slow now I'm still on stock.
Do the banking apps work ok as that's my main worry for changing as I need them.
Do you have a link for your version I can't seem to find it.
Thanks
Click to expand...
Click to collapse
Hi, I felt my device was slowly becoming unstable, and some bugs from the original MIUI device began to bother me a little, e.g. "Do Not Disturb" mode don't block message sounds from favorite contacts, I wanted only call sounds, as in Android One. My wife still uses the Hybrid OS (same phone as ours) and she likes it a lot because of the camera quality and the cool interface. Banking apps work fine in HybridOS.
I decided to downgrade my A2 Lite to the original Oreo Android One (8.1), and I think battery lasts more then Hybrid OS, and the phone is even more smoother and stable. Some tradeoffs are the (very bad) camera, no dark theme, no radio, and some other minor features, but the phone is almost like when I bought it back in 2018. Now I remember how great this phone was/is.
If you really wish, I can try to upload the Hybrid OS somewhere.

Bliss OS 11.13 GMS Stable - Touchscreen issue

Hi, I have a intel atom Z3735F tablet - Cube IWORK8. I've installed Bliss OS 11.13 GMS.
The thing is that the touchscreen works only when I turn on the tablet with the USB keyboard plugged into the micro-usb OTG port on the device. Once the tablet loads Bliss OS, I can unplug the keyboard and touchscreen works until I restart/turn off the tablet. When I launch it without keyboard plugged in, touchscreen doesn't work at all. Do you know why this might happen?
What I may add is that on every launch, no matter what I get below error. Yet, system loads.
Failed to initialize input device.
My BIOS Touch Pannel options:
Ntrig
MSSL
ChipOne
FocalTech
Goodix
Disabled
CPU Brand: Intel
CPU: Z3735F
Core: 1.8GHz,Quad Core
GPU: Intel HD Graphic(Gen7) 1280x800 px
To resolve this issue I had to install kernel 5.8 https://sourceforge.net/projects/blissos-dev/files/Android-Generic/PC/gearlock_extensions/
HI! Sorry to bother you but do you happen to have a step by step on how to install Bliss OS on a android Z3735 tablet? I have a chinese (Argentina manufactured or re branded) tablet with that processor and I´m hoping to be able to install Bliss OS to upgrade to at least Android 8. Thanks!
syt22 said:
To resolve this issue I had to install kernel 5.8 https://sourceforge.net/projects/blissos-dev/files/Android-Generic/PC/gearlock_extensions/
Click to expand...
Click to collapse
hi
i'm using the same chipset
HP Pavillion X2
also getting the same problem
first time running after installation, everything works
then the touchscreen died
is there reference to install that kernel using gearlock?
moqadmodar said:
hi
i'm using the same chipset
HP Pavillion X2
also getting the same problem
first time running after installation, everything works
then the touchscreen died
is there reference to install that kernel using gearlock?
Click to expand...
Click to collapse
have you been able to solve your issue?
after an installation, everything works well; auto rotation, volume and touchscreen.
but after that touchscreen does not work. auto rotate sometimes does not work.
volume buttons sometimes does not work. sometimes there's no audio.
And some persistent issues:
power button does not turn off the screen.
sometimes I need to long press power button to wake up device from sleep
I have an HP elite x2 G3 (kabylake core I5 cpu) and I also tried installing kernel 5.8 but no real effect.

Categories

Resources