Database Info

Stuck at Boot Loop, Need Help..

Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS

Um if you bought it from a samsung store, then take it back there.

my sasmsung galxy sm-j700f suddenly reboot to samsung lable
my mobile unable to open it flash to me "sasmung galaxy j7 powered by android" and it refuse to open then i flash the custom firmware by odin many times but it did not work then it try to flash twrp recovery and wibe data (factory reset )it did not work
Help please

gitompak said:
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Click to expand...
Click to collapse
try this guide I made for restoring stock firmware from Samsung sever with the smartswitch app for Windows.
http://forum.xda-developers.com/galaxy-j7/j700t-development/how-to-restore-j700t1-model-to-t3423455
but you NEED YOUR SERIAL# AND MODEL # of that phone!

Fix # I dont know - if it works
Try this if it helps....
You will need ( link unavailable due to my little amount of posting and not using this account):
Galaxy J7 USB Drivers for the phone
The stock ROM for the phone (exact firmware)
Odin
First install Samsung Galaxy J7 USB drivers on Windows PC. Then Download the Samsung Galaxy J7 Stock Firmware from the link above and extract the folder on your desktop.
Download ODIN flash tool to flash the firmware on your phone. Extract the folder and you will see the ODIN.exe file in the folder.
Now Turn off your Galaxy J7 and Boot in download mode.(Hold down Volume Down + Home + Power button at the same time)
Once your Galaxy J7 is in download mode. Connect it to the PC with USB cable and run the ODIN.exe file on your desktop.
If everything is right and drivers are working properly. You will see the blue box on the ODIN screen, if not reinstall the drivers again and reboot your PC.
Now select the AP option from the ODIN screen and select the firmware file that you extracted
Hit the Start button from the ODIN screen to start the flashing process.
Once completed you will see the PASS messages on the ODIN and Phone will reboot automatically. Now you can disconnect your phone.
IMPORTANT:. If your phone is still stuck on the boot loop or in the Samsung Android Logo, then turn off the phone and reboot in recovery mode. TO do this Hold down Volume Up + Home + Power button at the same time. Now from recovery select Wipe Data/Factory Reset and after that Wipe cache partition. Now reboot you phone. If you are using a custom recovery, just wipe data/factory reset and wipe cache partition again.
DONE!!!! You unbricked your Galaxy J7. Now your Phone is running the stock ROM. Check it on the setting. ENJOY..

What is the recommended firmware for
SM-J700F/DS?? Can I flash it with any SM-J700F ?
Thanks!

hazembadr00 said:
my mobile unable to open it flash to me "sasmung galaxy j7 powered by android" and it refuse to open then i flash the custom firmware by odin many times but it did not work then it try to flash twrp recovery and wibe data (factory reset )it did not work
Help please
Click to expand...
Click to collapse
Can you not hijack threads and make your own please?

Samsung J6 Touch Not Working
J6 touch not working after official update

gitompak said:
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Click to expand...
Click to collapse
Try to install TWRP on the phone, then try to wipe out the stock firmware that installed. And of course, reinstall the original stock firmware that come on that region. Its actually came from Indonesia, so be sure to install the right one.

Sijaygamer said:
What is the recommended firmware for
SM-J700F/DS?? Can I flash it with any SM-J700F ?
Thanks!
Click to expand...
Click to collapse
i need to know the answer for this please
i"ve tried every j700f rom out there nothing worked for me
is there any OFFICIAL firmware for the j700f/ds model ?

Samsung Galaxy S7 Edge ROOT (Exynos ONLY)

You can easily Root your S7 Edge (Exynos) by following my instructions! Running Android version 7 (Nougat)
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU DAMAGE OR BRICK YOUR PHONE. THIS THREAD IS CLEARLY FOR THE: SAMSUNG GALAX7 S7 EDGE (EXYNOS) SM-G935*. THIS IS THE METHOD OF HOW I ROOTED MY S7 EDGE AND I WANTED TO SHARE THIS METHOD WITH YOU.
WARNING: BEFORE STARTING TO ROOT YOUR PHONE MAKE SURE YOU HAVE AT LEAST 50% BATTERY. IF THE BATTERY RUNS OUT WHILE ROOTING YOUR PHONE, YOU WILL END UP DAMAGING YOUR PHONE
[AND MAKE SURE YOU BACKUP EVERYTHING INCLUDING SYSTEM, PHOTOS, VIDEOS, CONTACTS AND EVEN YOUR GOOGLE ACCOUNTS.]
To Root your S7 Edge you will need:
1. Your Galaxy S7 Edge(Exynos SM-G935*).
2. Your Laptop/PC
3. Files that will be given below.
Instructions:
1. Make sure you Enable USB Debugging and OEM Unlock From Developer setting. (To Enable Developer options you need to: Open settings>Scroll down and Press "About phone">Then you need to press "Build number" 6-7 times Until you see a Box saying that you Enabled Developer Options. Now go back and above the "About phone is where Developer Options are located)
2. Then you need to Download Odin and TWRP:
Odin Link: http://odindownload.com/download/Odin3_v3.10.6.zip
TWRP Link: https://dl.twrp.me/hero2lte/twrp-3.1.1-0-hero2lte.img.tar.html
3. After you downloaded all files on your Laptop/PC, you need to unzip Odin3_v3.10.6.zip anywhere you want.
4. Then you need to Enter Download mode by Turning off your S7 edge and pressing Home + Vol. Down + Power button until you see The S7 Edge logo.
5. After booting to Download mode. Connect your phone to the PC and Open Odin. You should see a small box saying ID:COM and below a blue Box saying "0:[COM*]". If you don't see that then you will need to download Samsung USB Drivers
USB Drivers: http://developer.samsung.com/technical-doc/view.do?v=T000000117
6. After connecting your Phone to your Computer, Press the "AP" Button and select the TWRP Zip you downloded.
7. After selecting TWRP Press the start button and wait until the process completes. Do NOT Unplug your phone until you see the box above The COM box saying PASS with green background.
8. Then your Phone should boot into Recovery. After that boot your phone normally
NOTE: AFTER FLASHING TWRP YOUR PHONE MAY NOT READ THE INTERNAL STORAGE AND YOU WONT BE ABLE TO BOOT YOUR PHONE OR INSTALL ANYTHING FROM INTERNAL STORAGE. TO FIX THAT JUST GO TO YOUR RECOVERY>WIPE>ADVANCED WIPE> TYPE YES.
ADVANCED WIPE WILL WIPE ANYTHING FROM YOUR INTERNAL STORAGE INCLUDING: PHOTOS,VIDEOS,APPS,CONTACTS AND ANYTHING THAT IS INSIDE THE INTERNAL STORAGE.
[MAKE SURE TO BACKUP EVERYTHING.]
9. After successfully booting your phone. Download the root Links:
SuperSU: http://download.chainfire.eu/1114/SuperSU/SR1-SuperSU-v2.82-SR1-20170608224931.zip?retrieve_file=1
dm-verity and forced encryption disabler:
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-5.1.zip
10. After that, you need to move these two files you just downloaded to your External SD Card.
11. Now boot to Recovery by turning off your phone and after that press the Power button + Home Button + Vol. Up button until you see S7 Edge logo.
12. After you booted to Recovery swipe the Allow Modifications. Then you will need to Go to Install>Select Storage>Micro SD Card>Select SuperSU Zip> Add more zips>no-verity zip.
13. Then slide to Install
14. After installation completes Click "Reboot system".
NOTE: Your phone should take 5-6 minutes to boot. Do NOT Turn your phone Off Until it boots Up.
Now your S7 Edge Should be rooted Now.
IF YOU HAVE ANY QUESTIONS ABOUT HOW TO INSTALL OR IF YOU HAVE ANY PROBLEMS INSTALLING. FEEL FREE TO PM ME. Thank's.

re: Rooting
@-_Unknown_-
Do you have Nougat 7 installed or Marshmallow 6.01 ?

Misterjunky said:
@-_Unknown_-
Do you have Nougat 7 installed or Marshmallow 6.01 ?
Click to expand...
Click to collapse
Android Version 7.0 (Nougat)

is there no way of avoiding or fixing the twrp internal storage problem without erasing all your data?

with this rooting will my knox, samsung pay, secured folder still be functioning?

-_Unknown_- said:
You can easily Root your S7 Edge (Exynos) by following my instructions! Running Android version 7 (Nougat)
DISCLAIMER: I AM NOT RESPONSIBLE IF YOU DAMAGE OR BRICK YOUR PHONE. THIS THREAD IS CLEARLY FOR THE: SAMSUNG GALAX7 S7 EDGE (EXYNOS) SM-G935*. THIS IS THE METHOD OF HOW I ROOTED MY S7 EDGE AND I WANTED TO SHARE THIS METHOD WITH YOU.
WARNING: BEFORE STARTING TO ROOT YOUR PHONE MAKE SURE YOU HAVE AT LEAST 50% BATTERY. IF THE BATTERY RUNS OUT WHILE ROOTING YOUR PHONE, YOU WILL END UP DAMAGING YOUR PHONE
[AND MAKE SURE YOU BACKUP EVERYTHING INCLUDING SYSTEM, PHOTOS, VIDEOS, CONTACTS AND EVEN YOUR GOOGLE ACCOUNTS.]
To Root your S7 Edge you will need:
1. Your Galaxy S7 Edge(Exynos SM-G935*).
2. Your Laptop/PC
3. Files that will be given below.
Instructions:
1. Make sure you Enable USB Debugging and OEM Unlock From Developer setting. (To Enable Developer options you need to: Open settings>Scroll down and Press "About phone">Then you need to press "Build number" 6-7 times Until you see a Box saying that you Enabled Developer Options. Now go back and above the "About phone is where Developer Options are located)
2. Then you need to Download Odin and TWRP:
Odin Link: http://odindownload.com/download/Odin3_v3.10.6.zip
TWRP Link: https://dl.twrp.me/hero2lte/twrp-3.1.1-0-hero2lte.img.tar.html
3. After you downloaded all files on your Laptop/PC, you need to unzip Odin3_v3.10.6.zip anywhere you want.
4. Then you need to Enter Download mode by Turning off your S7 edge and pressing Home + Vol. Down + Power button until you see The S7 Edge logo.
5. After booting to Download mode. Connect your phone to the PC and Open Odin. You should see a small box saying ID:COM and below a blue Box saying "0:[COM*]". If you don't see that then you will need to download Samsung USB Drivers
USB Drivers: http://developer.samsung.com/technical-doc/view.do?v=T000000117
6. After connecting your Phone to your Computer, Press the "AP" Button and select the TWRP Zip you downloded.
7. After selecting TWRP Press the start button and wait until the process completes. Do NOT Unplug your phone until you see the box above The COM box saying PASS with green background.
8. Then your Phone should boot into Recovery. After that boot your phone normally
NOTE: AFTER FLASHING TWRP YOUR PHONE MAY NOT READ THE INTERNAL STORAGE AND YOU WONT BE ABLE TO BOOT YOUR PHONE OR INSTALL ANYTHING FROM INTERNAL STORAGE. TO FIX THAT JUST GO TO YOUR RECOVERY>WIPE>ADVANCED WIPE> TYPE YES.
ADVANCED WIPE WILL WIPE ANYTHING FROM YOUR INTERNAL STORAGE INCLUDING: PHOTOS,VIDEOS,APPS,CONTACTS AND ANYTHING THAT IS INSIDE THE INTERNAL STORAGE.
[MAKE SURE TO BACKUP EVERYTHING.]
9. After successfully booting your phone. Download the root Links:
SuperSU: http://download.chainfire.eu/1114/SuperSU/SR1-SuperSU-v2.82-SR1-20170608224931.zip?retrieve_file=1
dm-verity and forced encryption disabler:
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-5.1.zip
10. After that, you need to move these two files you just downloaded to your External SD Card.
11. Now boot to Recovery by turning off your phone and after that press the Power button + Home Button + Vol. Up button until you see S7 Edge logo.
12. After you booted to Recovery swipe the Allow Modifications. Then you will need to Go to Install>Select Storage>Micro SD Card>Select SuperSU Zip> Add more zips>no-verity zip.
13. Then slide to Install
14. After installation completes Click "Reboot system".
NOTE: Your phone should take 5-6 minutes to boot. Do NOT Turn your phone Off Until it boots Up.
Now your S7 Edge Should be rooted Now.
IF YOU HAVE ANY QUESTIONS ABOUT HOW TO INSTALL OR IF YOU HAVE ANY PROBLEMS INSTALLING. FEEL FREE TO PM ME. Thank's.
Click to expand...
Click to collapse
i can't flash twrp because of FRP lock and I can't boot the form because of dm-verity verification failure. How can you help me?

YOUR PHONE OR INSTALL ANYTHING FROM INTERNAL STORAGE. TO FIX THAT JUST GO TO YOUR RECOVERY>WIPE>ADVANCED WIPE> TYPE YES.
ADVANCED WIPE WILL WIPE ANYTHING FROM YOUR INTERNAL STORAGE INCLUDING: PHOTOS,VIDEOS,APPS,CONTACTS AND ANYTHING THAT IS INSIDE THE INTERNAL STORAGE.
-------
Are you trying to break devices here? It's format data option you're looking for. It will wipe all your data and that's what needs to be done. One other thing, the guy brings up external SD card in step 10 but you can do it using computer if you enable USB debugging. Plug the USB cable when you boot up in twrp recovery and transfer the superuser file over to your storage.

doesnt work for me
ive done all steps but the problem is that the phone never boot into twrp and try to reboot but said it failed so i had to manually factory reset it so it can boot again is there a way to force the phone booting into recovery?

undeadAndi said:
ive done all steps but the problem is that the phone never boot into twrp and try to reboot but said it failed so i had to manually factory reset it so it can boot again is there a way to force the phone booting into recovery?
Click to expand...
Click to collapse
Did you found the solution?
I'm trying to install LineageOS 15.0 but Cant even get to install TWRP.. SMH

Fix ----
There is an option in odin that reboots the device after a flash. Go to odin > options > uncheck auto reboot. That way your phone doesn't get stuck at the samsung logo. Quick tip: If you try to reboot into recovery after twrp flash and fail, for example you hold down the wrong keys, your phone will be stuck at samsung logo so you have to be sure your doing it right. If in any case this does happen, hold power down volume and power button for 5 seconds and your phone will bootloop. Try rebooting into recovery again and format data

vooks said:
i can't flash twrp because of FRP lock and I can't boot the form because of dm-verity verification failure. How can you help me?
Click to expand...
Click to collapse
Same here, did you get it to work in the end?

sanitynl said:
Same here, did you get it to work in the end?
Click to expand...
Click to collapse
I remember ticking re-partitioning then using PIT with combination of No auto reboot.
I got to work in the end... flashed TWRP

(°_o) said:
I remember ticking re-partitioning then using PIT with combination of No auto reboot.
I got to work in the end... flashed TWRP
Click to expand...
Click to collapse
How were you able to use PIT? How did you get the twrp file to show up in PIT?

i have a problem on my s7 edge
i cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help me
i cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help mei cant use any touchwiz software my phone would just go into a boot loop. but now as there was just a leak of the s7 edge 8.0 rom i tried installing it and it worked
It booted up and worked but I cannot install any apps
I cannot install any app from the playstore,not able to restore and install any apps from the samsung cloud,and not able to to install any apk that is downloaded from any browser
Guys please help me

ingrahamab said:
How were you able to use PIT? How did you get the twrp file to show up in PIT?
Click to expand...
Click to collapse
I think I got the PIT from another thread... I dont remeber acutally..
I already got TWRP working.. and flashed custom ROM..
Sorry

Only for EDGE?
Hi, i have the regular S7. Think this root will work?

just got the galaxy s7 exynos dual sim international version
SM-G930FD (International Dual SIM)
will rooting bring any benefits?
i hear a lot about slowed down phones,
crap battery life, etc.

[email protected] said:
Hi, i have the regular S7. Think this root will work?
Click to expand...
Click to collapse
I have the Canadian version SM-G930W8, had trouble flashing recovery until I found this one,,,,,, twrp-3.1.1-0-herolte.img.tar. Flash in download mode and your set, just remember the steps of enabling oem unlock etc...
---------- Post added at 06:10 AM ---------- Previous post was at 05:59 AM ----------
9kaze9 said:
just got the galaxy s7 exynos dual sim international version
SM-G930FD (International Dual SIM)
will rooting bring any benefits?
i hear a lot about slowed down phones,
crap battery life, etc.
Click to expand...
Click to collapse
I love rooting and playing around with different roms, currently I have 3 roms I am testing out. Each are fast
SupermanRom.v1.1.9
RR-N-v5.8.5-herolte-Final
Note.Fan.Edition.Vol2.0
I have several kernels that I test out and overclock. As for battery life I am not sure as I bought a Samsung Galaxy S7 Battery Case HETP Rechargeable Extended 4500mAh Backup Battery Charging Case

good info guys, thanks! Just to confirm, the galaxy s7 edge and regular galaxy s7 exynos are the same phone essentially? this root should work on both edge and regular exynos galaxy s7?

Unfortunately, yes

Galaxy s6 G920F "bricked".

Dear Xda Developers,
I have a s6 (G920F) from a friend, his phone failed on updating and got in a boot loop. The phone is from Israel and I live in the Netherlands so he didn't get any warranty here in the Netherlands. So I flashed the stockrom from Israel to it but I got this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I wait a while it goes to recovery, I can still access download mode. I got the rom from SamMobile, I also tried flashing the French and Netherlands rom all from sam mobile to it but no success same outcome. tried factory wipe also nothing. I got also the 4 file firmware from the program samfrim and also the Israel version but no luck either, I'm out of ideas so far. hope you can help me.
kind regards,
Ruben
Sorry for my bad English..

Rubenskie said:
Dear Xda Developers,
I have a s6 (G920F) from a friend, his phone failed on updating and got in a boot loop. The phone is from Israel and I live in the Netherlands so he didn't get any warranty here in the Netherlands. So I flashed the stockrom from Israel to it but I got this screen:
If I wait a while it goes to recovery, I can still access download mode. I got the rom from SamMobile, I also tried flashing the French and Netherlands rom all from sam mobile to it but no success same outcome. tried factory wipe also nothing. I got also the 4 file firmware from the program samfrim and also the Israel version but no luck either, I'm out of ideas so far. hope you can help me.
kind regards,
Ruben
Sorry for my bad English..
Click to expand...
Click to collapse
Look HERE. There is all what you need. Just download latest stock via SamFirm (or www.updato.com) then flash it via latest Odin3. For get download mode just press Volume - & Power & Home for 30 seconds, phone must show you download mode. After correctly flashed first go to stock recovery menu (Volume +, Power, Home) and do factory reset (format data) and wipe dalvik/cache, then normally reboot to system.

rifek4 said:
Look HERE. There is all what you need. Just download latest stock via SamFirm (or www.updato.com) then flash it via latest Odin3. For get download mode just press Volume - & Power & Home for 30 seconds, phone must show you download mode. After correctly flashed first go to stock recovery menu (Volume +, Power, Home) and do factory reset (format data) and wipe dalvik/cache, then normally reboot to system.
Click to expand...
Click to collapse
I did all this it is now stuck in a bootloop.

Rubenskie said:
I did all this it is now stuck in a bootloop.
Click to expand...
Click to collapse
For sure correctly flashed latest firmware for your model? And did factory reset etc? Try flash CF-Auto-Root then TWRP (both via Odin3). After that go to recovery menu (TWRP) do full wipe and try clean install any custom ROM.

rifek4 said:
For sure correctly flashed latest firmware for your model? And did factory reset etc? Try flash CF-Auto-Root then TWRP (both via Odin3). After that go to recovery menu (TWRP) do full wipe and try clean install any custom ROM.
Click to expand...
Click to collapse
I flashed the right frimware so i tried your second option cf-auto root successful, twrp successful tried to flash lineage os (unofficial) now its stuck on the loading screen of lineage os https://forum.xda-developers.com/galaxy-s6/orig-development/rom-lineageos-14-1-t3598775

Rubenskie said:
I flashed the right frimware so i tried your second option cf-auto root successful, twrp successful tried to flash lineage os (unofficial) now its stuck on the loading screen of lineage os https://forum.xda-developers.com/galaxy-s6/orig-development/rom-lineageos-14-1-t3598775
Click to expand...
Click to collapse
I didn't tried LOS. But do a full-wipe (format all) and try just another, the best choose is stock-based ROM, for example OdexLite. If everything will be good then look for another ROM. My favorite is Noble S8 Port (NNE5.1).

rifek4 said:
I didn't tried LOS. But do a full-wipe (format all) and try just another, the best choose is stock-based ROM, for example OdexLite. If everything will be good then look for another ROM. My favorite is Noble S8 Port (NNE5.1).
Click to expand...
Click to collapse
I tried flashing odex lite, now it boots to twrp. And for some weird reason is my touchscreen mirrored in twrp, when i tap on the right side on my screen it activates the left side. I attached a video so you can see.

Rubenskie said:
I tried flashing odex lite, now it boots to twrp. And for some weird reason is my touchscreen mirrored in twrp, when i tap on the right side on my screen it activates the left side. I attached a video so you can see.
Click to expand...
Click to collapse
Ok, but it's really weird. Look's like hardware issue. Something happened with phone before?

rifek4 said:
Ok, but it's really weird. Look's like hardware issue. Something happened with phone before?
Click to expand...
Click to collapse
Not that I know, I had the same problem on my tab a t550 I flashed an older twrp and fixed it but I tried that also on the s6 but doesnt work

Rubenskie said:
Not that I know, I had the same problem on my tab a t550 I flashed an older twrp and fixed it but I tried that also on the s6 but doesnt work
Click to expand...
Click to collapse
If you downloaded correctly latest TWRP for your model, must works without any problems like for milions people.
P.S.
Try to reflash latest stock 7.0 via Odin then after finished just go to stock recovery menu, do factory reset and wipe dalvik/cache then reboot to system and check how its going.

rifek4 said:
If you downloaded correctly latest TWRP for your model, must works without any problems like for milions people.
P.S.
Try to reflash latest stock 7.0 via Odin then after finished just go to stock recovery menu, do factory reset and wipe dalvik/cache then reboot to system and check how its going.
Click to expand...
Click to collapse
I did that and now I get the no command screen if I wait a bit it reboots, I can't get into recovery only in download.

Rubenskie said:
I did that and now I get the no command screen if I wait a bit it reboots, I can't get into recovery only in download.
Click to expand...
Click to collapse
After flashed stock when you tryin get to recovery menu you see no command that's it right? If phone show you "no command" try to use Volume's buttons or Home, you should see just recovery menu options after few clicks.

rifek4 said:
After flashed stock when you tryin get to recovery menu you see no command that's it right? If phone show you "no command" try to use Volume's buttons or Home, you should see just recovery menu options after few clicks.
Click to expand...
Click to collapse
After wipe its now stuck on the pulsating samsung boot

Rubenskie said:
After wipe its now stuck on the pulsating samsung boot
Click to expand...
Click to collapse
Flash CF-Auto-Root and latest TWRP via latest Odin3. Full-wipe and try install and boot for example Noble S8 Port (NNE5.1).

rifek4 said:
Flash CF-Auto-Root and latest TWRP via latest Odin3. Full-wipe and try install and boot for example Noble S8 Port (NNE5.1).
Click to expand...
Click to collapse
I reflashed everything and tried installing nne5.1 and i get an error (see attachments) twrp ia still "mirrored"

Rubenskie said:
I reflashed everything and tried installing nne5.1 and i get an error (see attachments) twrp ia still "mirrored"
Click to expand...
Click to collapse
Again look's like HW issue if you TWRP is mirrored.

Rubenskie said:
Dear Xda Developers,
I have a s6 (G920F) from a friend, his phone failed on updating and got in a boot loop. The phone is from Israel and I live in the Netherlands so he didn't get any warranty here in the Netherlands. So I flashed the stockrom from Israel to it but I got this screen:
If I wait a while it goes to recovery, I can still access download mode. I got the rom from SamMobile, I also tried flashing the French and Netherlands rom all from sam mobile to it but no success same outcome. tried factory wipe also nothing. I got also the 4 file firmware from the program samfrim and also the Israel version but no luck either, I'm out of ideas so far. hope you can help me.
kind regards,
Ruben
Sorry for my bad English..
Click to expand...
Click to collapse
Hello brother, the only way is to install twrp, you don't need to open the bootloader, first install twrp with Edin, secondly, in the install twrp section, install the Magisk root zip file and hit reboot, then it will come up, then if you jump the serial with Octopus box, the serial fix it

Rubenskie said:
I did all this it is now stuck in a bootloop.
Click to expand...
Click to collapse
Ruben , you dont need cf root , You have TWrp? Install this version https://eu.dl.twrp.me/zeroflte/twrp-3.2.1-0-zeroflte.img.tar.html via odin or unpack get the image out of it and flash in twrp as IMG and recovery ..then in TWRP look for tab FORMAT DATA , type yes , then when done hit home in TWRP and select reboot back into recovery , When back in recovery , install Android 10 or 11 ,by Enesuzun , don't flash old outdated ROMS , last build is Feb 2022 ROM 11 , do as I said and your done. NO need ROOT MAGISK or all of that ,

[Guide] Huawei Y360-U61: Stock ROM / Factory Reset / OTA / TWRP / Root

Hi, in this post Im going to share with you all my tutorials for the Y360 in only one post and translated to english. You can follow this guides regardless for your Y360 variant, however, the firmware file im giving you guys here is for the U61, do not try to flash this firmware if you dont have a U61.
How to install stock rom (firmware) on the Y360-U61​What we are gonna need in this first part is the Mediatek Driver, the Sp Flash Tool and the firmware files.
Driver Mediatek Y360:
https://mega.nz/#!dzxBnDpb!c37qAbpfJ5FPB2BwCCglBentRcgBReLhT6UjULxQ3L8
Option 2:https://androidmtk.com/download-mtk-usb-all-drivers
SP Flash Tool:
https://mega.nz/#!9uI3wDxL!07YMWuwPPoJ1uYTUnSLSuFgUEruy3iS__M4GVb3-ayI
Option 2: https://spflashtool.com/
Firmware stock Y360-U61 (B116): https://mega.nz/#!4zJzFKjR!kROGPkFXtK-xp7yH7pIWia3eLbVMf7gdVSOEjWJJYVo
PLEASE READ
- Files have RAR5 compression, you'll need Winrar 5
- Password: Tecnoriales
Before you start, unrar all 3 files and instal MTK Drivers.
1. Run Sp Flash Tool as Admin, check that in Downlaod Agent says MTK_AllInOne_DA.bin, and in Scatter put the one tha is inside the firmware folder.
2. Leave everything as is and press Download, turn off your Y360-U61 and plug it to your PC using an USB cable.
3. If the drivers were properly installed, Sp Flash Tool will recognize your phone and start writing data to it automatically. This will take some minutes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. When the process is done you will see a green check and the phone will be shutdown. Now is safe to close Sp FlashTool, disconnect your phone and turn in on.
5. Since this is a first boot and Android have to build caches and stuff it might take some time and even restart itself in the process. Eventually you'll reach the setup wizard. If you end up with a bootloop, ramdom reboots, etc, perform a Factory reset from the recovery menu.
How to perform a factory reset from the recovery in the Y360​To do this you dont need a custom recovery, it can be done using the stock recovery that comes on your Y360.
1. Turn off your Y360 and press Vol+ y Power until you see the white text.
2. With Vol+ select recovery and press Vol- to enter.
3. Your y360 will reboot and enter into the recovery menu
4. Once on the recovery, use volume keys to go up and down and power to select. Go to Wipe data / Factory Reset
5. Go to Yes and press Power, the hard reset will start, it takes seconds. You can see the status in the log at the bottom of the screen.
6. Go back to the man menu of the recovery and select Reboot system Now pressing Power. Your 360 will reboot.
7. Again, this will be a long boot since Android has to build caches and stuff. Luckily your phone will be trouble free once it boots up and you complete the setup wizard.
In this video you can see how to flash the firmware and how to perform the hard reset from the recovery menu. You can also notice how was getting random reboots after flashing the firmware and i solved this performing the factory reset.
[youtube]8jy_nRtuYE8[youtube]
Update Y360 via OTA​The firmware i left is B116 which i think is the latest an has no updates.
For Information purposes:
The firmware i gave you is B104, but in the huawei servers exist the b107 patch. So the very first thing you should do after installing the firmware is updating. Specially if you plan on rooting, OTAs will break root.
Once your y360-U61 is up and running, connect to a wifi network and go to Settings to run the updater. Like i said you will find the B107 update, which is about 90MB.
After the download is complete you have to give the order to install the update, from now on the process is automatic, the phone will restart and the update will be installed.
Once it finishes, you can go to updates again to check your version, it should be B107 and it should say there's no more updates.
Install TWRP for the Huawei Y360​TWRP is a custom recovery which allows you to flash zips to modify or change your system. You need the mediatek drivers, sp flashtool and the .img file of TWRP.
Driver Mediatek Y360:
https://mega.nz/#!dzxBnDpb!c37qAbpfJ5FPB2BwCCglBentRcgBReLhT6UjULxQ3L8
SP Flash Tool:
https://mega.nz/#!9uI3wDxL!07YMWuwPPoJ1uYTUnSLSuFgUEruy3iS__M4GVb3-ayI
TWRP 2.8.7.0:
https://mega.nz/#!V2BUCJDZ!wif0gspJ2lZiYzJPzQiG73LVzWGcbamK8bWos6sdPvk
TWRP 3.1 (Newer, required by Android N roms):
https://mega.nz/#!AqQW0bBJ!xOzVZyVBjye9zgLO7G9tttL886i-7uCyMP_P7d0ZS2Q
Password: Tecnoriales
PLEASE READ
- Files have RAR5 compression, you'll need Winrar 5
Before you install, unrar all files and install mediatek drivers.
1. Run Sp Flash Tool as Admin, check that in Downlaod Agent says MTK_AllInOne_DA.bin, and in Scatter put the one tha is inside the SP FlashTool folder or the one from your stock firmware folder.
<Mod Edit> Blog link removed
2. Uncheck all boxes except recovery., double click on it to open Windows explorer and load the .img file of TWRP.
3. Press Download, turn of your phone and plug to the PC. If drivers are ok the writing will start automatically is only a couple of seconds. You will see a green check message from Sp Flash Tool when it finishes. It is safe to close it and unplug your phone.
4. To boot into recovery turn off your Y360 and press Vol+ y Power until you see the white text. Select recovery and Press Vol-
5. Your 360 will restart and boot into TWRP, since this is the first time you will see a prompt about allowing TWRP to modify your system, swipe the slider control at the bottom of the screen to accept.
Now that you have a custom recovery you can flash zip files to root, install xposed, install custom roms, etc...
Root the Huawei Y360 (SuperSu)​To do this you need to have TWRP and the zip file with SuperSu.
Root Y360 (SuperSu):
https://mega.nz/#!86xG0IYY!B6doaVtqKxXyYFQIptCQypW9A-zdaqEa6ndrAZ9Ij78
Password: Tecnoriales
Download the file and copy to your sd card before you start.
1. Boot into recovery and go to Install
2. Go to your external_SD and select the Zip file
3. Slide the control on the bottom of the screen to flash the zip file. It will take seconds.
4. When is done tap on reboot system now and wait for the phone to get ready. You might see android optimizing some apps.
5. You will have SuperSu on your launched and your phone fully rooted. This is an old version so you will get soon the Update from Google play.
In this video you can see how to install TWRP and how to root. Is in spanish

thank you !!!!!

firmware zip password is wrong

My Huawei is bricked
Hi,
my Huawei Y360-U61 dual-SIM boots but then blocks with continuous pop-ups or reboots.
I tried to update the firmware ROM via MicroSD card using many versions (full update and OTAs) from a website that provides many ROM versions, but without success. When I boot in recovery mode it says that the firmware version is Y360-U61V100R001C577B111 (I found and tried with this and successive versions without success), and I always perform a factory reset after updating and rebooting. I also tried connecting my phone to my laptop then using SP flash tools with the firmware version you provided on this thread (that should correspond to version V100R001C480B104c for the device model Y360-U23, or V100R001C443B104, or Y360-U31V100R001C05B104 both for the device model Y360-U31), I also tried in fastboot mode and ADB mode, again without success. My phone was bought in Italy about 3 years ago (2015 or so), and maybe I inadvertently rooted it, then tried to have an unblock code from Huawei consumer support but they eventually said that there is no code for my smartphone.
Before throwing away my phone, do you have any hint in this regard on how to eventually solve the problem?
Thank you
Bruno

What is a password decompressor
What is a password decompressor

IMEI is gone after factory reset. Tried flashing firmware. still network is not detected. Y360-U61

I have the same problem on my Italian phone. Any luck resolving the issue?

Hello guys, i have a problem. After flashing via SP Flash Tool nothing happened. I have done this on other chinese phones without a single problem but now i dont know what to do. I tried flashing recovery, flash with preloader or without and still nothing happens. In SP Tool everything looks fine and when i turn up phone, old system starts up

tornido067 said:
firmware zip password is wrong
Click to expand...
Click to collapse
No, is not. Is a RAR5 file you need to use Winrar 5. Sorry for the late response

RavinduSha said:
IMEI is gone after factory reset. Tried flashing firmware. still network is not detected. Y360-U61
Click to expand...
Click to collapse
Get it fixed on engeneer menu. Its super easy, just search it on google for MTK phones. Sorry for the late response

saeedshsh said:
What is a password decompressor
Click to expand...
Click to collapse
- Password: Tecnoriales - Is in OP. Sorry for the late response

brunobiondo said:
Hi,
my Huawei Y360-U61 dual-SIM boots but then blocks with continuous pop-ups or reboots.
I tried to update the firmware ROM via MicroSD card using many versions (full update and OTAs) from a website that provides many ROM versions, but without success. When I boot in recovery mode it says that the firmware version is Y360-U61V100R001C577B111 (I found and tried with this and successive versions without success), and I always perform a factory reset after updating and rebooting. I also tried connecting my phone to my laptop then using SP flash tools with the firmware version you provided on this thread (that should correspond to version V100R001C480B104c for the device model Y360-U23, or V100R001C443B104, or Y360-U31V100R001C05B104 both for the device model Y360-U31), I also tried in fastboot mode and ADB mode, again without success. My phone was bought in Italy about 3 years ago (2015 or so), and maybe I inadvertently rooted it, then tried to have an unblock code from Huawei consumer support but they eventually said that there is no code for my smartphone.
Before throwing away my phone, do you have any hint in this regard on how to eventually solve the problem?
Thank you
Bruno
Click to expand...
Click to collapse
Well that is weird maybe you just have a bad EMMC. If flashing the firmware with Sp flashtool doesnt fix the problem... i cant think on anything it will. Sorry for the late response

M0rt3s said:
Hello guys, i have a problem. After flashing via SP Flash Tool nothing happened. I have done this on other chinese phones without a single problem but now i dont know what to do. I tried flashing recovery, flash with preloader or without and still nothing happens. In SP Tool everything looks fine and when i turn up phone, old system starts up
Click to expand...
Click to collapse
same problem as well anyone know what's problem ?

mauriciognr said:
Get it fixed on engeneer menu. Its super easy, just search it on google for MTK phones. Sorry for the late response
Click to expand...
Click to collapse
Was able to get imei back. But the network is not detected.

thank you
mauriciognr said:
Hi, in this post Im going to share with you all my tutorials for the Y360 in only one post and translated to English.
Click to expand...
Click to collapse
I cant THANK YOU enough man, I am skilled in this stuff but after many attempts, i felt really lost.
your nice post and those links really helped me.
thanks again
mortem

TWRP installation
mauriciognr said:
Install TWRP for the Huawei Y360​TWRP is a custom recovery which allows you to flash zips to modify or change your system. You need the mediatek drivers, sp flashtool and the .img file of TWRP.
Click to expand...
Click to collapse
I found and tried with success a way to install TWRP without the need of a PC:
- Root your device with KingRoot (APK is available on apkpure.com);
- Install MobileUncleTool (I found version 3.0 here: https://androiddatahost.com/414a2 )
- Download a custom recovery in SD Card root (the one in the opening post)
- Start Mobileuncle Tools and open Recovery Update menu item (grant su permissions when asked)
- Select and install the just downloaded custom recovery

[solved] bypass frp lock while drk error

This tutorial will help you to bypass frp lock while direct root key or DRK is damage. I tried so many ways to bypass the frp but its custom binary blocked by frp every time i flashed a file.
1. download odin 3.12.x
2. Download and Flash factory binary
factory binary
Or you can refer to this thread
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
Or this
click here
3. Flash the factory binary using odin. Just ticm ap then browse your downloaded file. enable dev opt. Usb debugging. (Enable dot search B under usb debugging if no yet activated)
4. download apk installer software for pc and Install
download here
5. After installing apk installer for pc. It will automatically detect your phone
5. Download kingroot.apk
kingroot download
6. After downloading kingroot.apk open APK Installer for pc and browse for kingroot.apk then install
7. After successfully installed go to your S7 then open* kingroot application.
8. Before you root connect your s7 to wifi.
9. Root your phone using kingroot. (In case you see"Just tap request" choose your s7, just wait after a while you will be able to root it.
10. If successfully rooted, Bypass frp using any frp bypassing app. (I recommend srs unlock because it has free bypass on frp download here ) or maybe you can just other application to bypass frp like crack z3x samsung tool 29.5, frp tool pro, frp hijacker, etc that supports g930f/fd.
11. Perform factory data reset under settings and after that try to perform wipe data/factory data reset thru recovery mode and wipe cache
12. Turn off your phone
13. Go to download mode. Press and hold at the same time (vol.down+home button+power button)
14. Check if the rhe FRP status was turn off
15. Flash your stock firmware.
Once you flashed your firmware successful. You will encounter an error about dm verity verification.
You just need to flash twrp 3.2.0.4 and install the disable dm verity zip file. Or you can just search to google if you want. I dont have enough time to upload the files but if i have free time. I will update this thread
In case of error try to repeat.
Do at your own risk. I have no responsibility if you brick your phone. Thou it was already brick hehehe just kidding
Im just here helping to share the method ive found thru searching the web.
It works for me.
You can also donate if you find this tutorial is helpful
Btc: 38DqbW3KppDGQWnqVh3qT9nCZQKNCBCSes
Eth: 0x99aaed9c3fb9b1ba0626a8ffec618cad06c18153
Credits to all the owners of the links ive provided
Lìnks:
http://q.gs/E7Ha9
http://q.gs/E7KKJ

Up

kripto00 said:
This tutorial will help you to bypass frp lock while direct root key or DRK is damage. I tried so many ways to bypass the frp but its custom binary blocked by frp every time i flashed a file.
1. download odin 3.12.x
2. Download and Flash factory binary
factory binary
Or you can refer to this thread
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
Or this
click here
3. Flash the factory binary using odin. Just ticm ap then browse your downloaded file. enable dev opt. Usb debugging. (Enable dot search B under usb debugging if no yet activated)
4. download apk installer software for pc and Install
download here
5. After installing apk installer for pc. It will automatically detect your phone
5. Download kingroot.apk
kingroot download
6. After downloading kingroot.apk open APK Installer for pc and browse for kingroot.apk then install
7. After successfully installed go to your S7 then open* kingroot application.
8. Before you root connect your s7 to wifi.
9. Root your phone using kingroot. (In case you see"Just tap request" choose your s7, just wait after a while you will be able to root it.
10. If successfully rooted, Bypass frp using any frp bypassing app. (I recommend srs unlock because it has free bypass on frp download here ) or maybe you can just other application to bypass frp like crack z3x samsung tool 29.5, frp tool pro, frp hijacker, etc that supports g930f/fd.
11. Perform factory data reset under settings and after that try to perform wipe data/factory data reset thru recovery mode and wipe cache
12. Turn off your phone
13. Go to download mode. Press and hold at the same time (vol.down+home button+power button)
14. Check if the rhe FRP status was turn off
15. Flash your stock firmware.
Once you flashed your firmware successful. You will encounter an error about dm verity verification.
You just need to flash twrp 3.2.0.4 and install the disable dm verity zip file. Or you can just search to google if you want. I dont have enough time to upload the files but if i have free time. I will update this thread
In case of error try to repeat.
Do at your own risk. I have no responsibility if you brick your phone. Thou it was already brick hehehe just kidding
Im just here helping to share the method ive found thru searching the web.
It works for me.
You can also donate if you find this tutorial is helpful
Btc: 38DqbW3KppDGQWnqVh3qT9nCZQKNCBCSes
Eth: 0x99aaed9c3fb9b1ba0626a8ffec618cad06c18153
Credits to all the owners of the links ive provided
Lìnks:
http://q.gs/E7Ha9
http://q.gs/E7KKJ
Click to expand...
Click to collapse
I am rooted with magisk. is rooting with kingroot necessary?

LineArc said:
I am rooted with magisk. is rooting with kingroot necessary?
Click to expand...
Click to collapse
Once combination file is flashed its neccessary to use kingroot because you cant flash twrp while frp on and drk error

LineArc said:
I am rooted with magisk. is rooting with kingroot necessary?
Click to expand...
Click to collapse
If you root your phone before and flashed combjnation file,Root will be gone. So use king root.apk thru apk installer because no file.manager in combination file

kripto00 said:
If you root your phone before and flashed combjnation file,Root will be gone. So use king root.apk thru apk installer because no file.manager in combination file
Click to expand...
Click to collapse
the thing is that I get error while flashing combination file. something like device 2 binary 1.
right now my binary are samsung official and system is custom. need your help bruh.

LineArc said:
the thing is that I get error while flashing combination file. something like device 2 binary 1.
right now my binary are samsung official and system is custom. need your help bruh.
Click to expand...
Click to collapse
When i flash factory binary no error at all. Try to download intrtnational version of factory bimary or combination file

kripto00 said:
When i flash factory binary no error at all. Try to download intrtnational version of factory bimary or combination file
Click to expand...
Click to collapse
Thank you for your help but I got mine repaired. A guy shared a link with me which I flashed with Odin it was a full firmware and surprisingly it did not get any error this time.
But still thank you

kripto00 said:
This tutorial will help you to bypass frp lock while direct root key or DRK is damage. I tried so many ways to bypass the frp but its custom binary blocked by frp every time i flashed a file.
1. download odin 3.12.x
2. Download and Flash factory binary
factory binary
Or you can refer to this thread
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
Or this
click here
3. Flash the factory binary using odin. Just ticm ap then browse your downloaded file. enable dev opt. Usb debugging. (Enable dot search B under usb debugging if no yet activated)
4. download apk installer software for pc and Install
download here
5. After installing apk installer for pc. It will automatically detect your phone
5. Download kingroot.apk
kingroot download
6. After downloading kingroot.apk open APK Installer for pc and browse for kingroot.apk then install
7. After successfully installed go to your S7 then open* kingroot application.
8. Before you root connect your s7 to wifi.
9. Root your phone using kingroot. (In case you see"Just tap request" choose your s7, just wait after a while you will be able to root it.
10. If successfully rooted, Bypass frp using any frp bypassing app. (I recommend srs unlock because it has free bypass on frp download here ) or maybe you can just other application to bypass frp like crack z3x samsung tool 29.5, frp tool pro, frp hijacker, etc that supports g930f/fd.
11. Perform factory data reset under settings and after that try to perform wipe data/factory data reset thru recovery mode and wipe cache
12. Turn off your phone
13. Go to download mode. Press and hold at the same time (vol.down+home button+power button)
14. Check if the rhe FRP status was turn off
15. Flash your stock firmware.
Once you flashed your firmware successful. You will encounter an error about dm verity verification.
You just need to flash twrp 3.2.0.4 and install the disable dm verity zip file. Or you can just search to google if you want. I dont have enough time to upload the files but if i have free time. I will update this thread
In case of error try to repeat.
Do at your own risk. I have no responsibility if you brick your phone. Thou it was already brick hehehe just kidding
Im just here helping to share the method ive found thru searching the web.
It works for me.
You can also donate if you find this tutorial is helpful
Btc: 38DqbW3KppDGQWnqVh3qT9nCZQKNCBCSes
Eth: 0x99aaed9c3fb9b1ba0626a8ffec618cad06c18153
Credits to all the owners of the links ive provided
Lìnks:
http://q.gs/E7Ha9
http://q.gs/E7KKJ
Click to expand...
Click to collapse
I have G935F Binary 2, I follow the same steps > after reset phone > frp lock still ON.
What's wrong?

mofazar said:
I have G935F Binary 2, I follow the same steps > after reset phone > frp lock still ON.
What's wrong?
Click to expand...
Click to collapse
Did you root your phone using kingroot thru apk installer?

LineArc said:
Thank you for your help but I got mine repaired. A guy shared a link with me which I flashed with Odin it was a full firmware and surprisingly it did not get any error this time.
But still thank you
Click to expand...
Click to collapse
Any chance you can send me the link i really need a combination rom for my G930F binary 2 but the only ones around are for AP SWREV B:1 and the only one i have for B:2 binary is not booting at all and i need to fix my imei number like yesterday i would really appreciate any help if you can.
The flash error you are experienceing device 2 binary 1 is because your S7 now uses the march 2018 update and now bootloaders have gone from U1 to U2 firmware and hence a U1 bootloader or firmware can no longer be flashed due to an Efuse that blows to prevent a downgrade you can check this out on sammobile check the firmware number from the release before march 2018 they will say G930FXXU1DRBE for an example but the march firmwares onwards use G930FXXU2DRBE for example.
Thanks
Matthew from australia

Matty1993 said:
Any chance you can send me the link i really need a combination rom for my G930F binary 2 but the only ones around are for AP SWREV B:1 and the only one i have for B:2 binary is not booting at all and i need to fix my imei number like yesterday i would really appreciate any help if you can.
The flash error you are experienceing device 2 binary 1 is because your S7 now uses the march 2018 update and now bootloaders have gone from U1 to U2 firmware and hence a U1 bootloader or firmware can no longer be flashed due to an Efuse that blows to prevent a downgrade you can check this out on sammobile check the firmware number from the release before march 2018 they will say G930FXXU1DRBE for an example but the march firmwares onwards use G930FXXU2DRBE for example.
Thanks
Matthew from australia
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=890129502657580764
This is the link that got mine repaired. Hope it is of any help for you. Mine is totally fine with Oreo running on it.

kripto00 said:
Did you root your phone using kingroot thru apk installer?
Click to expand...
Click to collapse
Yes exactely as it explain.
But I found an another way
---------- Post added at 06:17 PM ---------- Previous post was at 06:05 PM ----------
If someone need it, this is way for me to fix DRK error U2 FRP Lock ON.
-Flash: Combination U2, let phone power on, then power off and boot to download mode
-Flash Stock Rom U2: Pit _ AP _ BL (Tick Erase Nand) with Odin
-Phone will force boot into recovery but will fail.
-Extract "Recovery.img _ Cache.img" from Stock Rom U2 > Recompil 2 files on .tar file.
-Flash the .tar file (odin)
-Remove FRP UFS usign Z3x, it will Done
-Flash Full Stock Rom U2
-Repair DRK by Root phone (Z3x)
-Done
It may be poorly explained but it helped me a lot. And I hope someone else could explain it better.

LineArc said:
https://androidfilehost.com/?fid=890129502657580764
This is the link that got mine repaired. Hope it is of any help for you. Mine is totally fine with Oreo running on it.
Click to expand...
Click to collapse
Thanks mate ive only just seen this now ill download it and give it a crack be interested to know if it actually works or not i did manage to restore my imei with my TWRP back up had to wait weeks for it but would be interesting to see what factory apps are pre installed on that version as to the other model samsung factory binarys, i have a new S8 now so the 7 has now become my new dummy tester