Database Info

The complete solution to repair dead boot and unbrick and update LG P920 O3D

The complete solution to repair dead boot and unbrick and update & root LG P920 O3D to Android 4.0.4 without any problems with the official Rom ICS{ all fix}full 3D and camera work perfect all the most languages support.
Before anything make sure that all LG Drivers and everything Installed and run under Windows 7 ultimate and disable user account control settings don't run under Windows 8
LG Drivers https://docs.google.com/file/d/0Bwirw62bfRfebUNQNjJzUHlNbHM/edit?usp=sharing
First, download the following files:
1- flash fastboot and Replace the original boot and download mode http://www.mediafire.com/download/b...for_optimus-v1.22+modified+by+XcachorroX®.rar
or
https://drive.google.com/file/d/0Bwirw62bfRfeY2hsY3JRTDIybTQ/edit?usp=sharing
2- download Rom https://drive.google.com/file/d/0Bwirw62bfRfeM0dXbUVpcmNUOEU/edit?usp=sharing
3- download SmartFlashTool-3D to flash rom by fls and bin file https://docs.google.com/file/d/0Bwirw62bfRfeY0hKNjlqZFRSdUU/edit?usp=sharing
Second
Instructions:
After downloading the files previous
1- flash fastboot and Replace the original boot and download mode Until the fastboot is the basic boot for device.
Connect phone without battery,phone detect OMAP4430 {device manager}
Install driver omap "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) by select update driver then select browse my computer for driver {install driver Manual}
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After driver installation ends remove usb cable
Run start_fastboot.bat and select option 2
Pull out battery
when is waiting for omap44 connect usb cable to your phone he start .
then insert battery to your phone when is waiting5 Seconds and follow the instructions on screen after this you see logo LG Gray
in phone and He asks you entered fastboot Answer no and accept to flash and Replace the x-loader and u-boot source then inter to download mood and flash .
If the LG COSMO appears in device manager install driver for her by select update driver then select browse my computer for driver {install driver Manual} and select Install driver from "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) then try again step 2 flash fastboot .
Another method to flash fastboot {Flash Wkpark boot loader +cwm normal recovery } use this tool and and follow the instructions on the screen https://docs.google.com/file/d/0Bwirw62bfRfeUWw0QU5jRVV4UlU/edit?usp=sharing
A Small Guide if Anyone has troubles installing Omap4430 Driver in Windows 7
arsen4oo said:
When plugging the phone in,find OMAP4430 in "Other Devices" in Device Manager.
Right click on OMAP4430,then click "Update Driver Software..."
Then browse to your omap4boot 1.8 folder that you have extracted from zip
Choose the usb_drv_windows folder and click OK
While installing the driver,ignore any warning messages
After installation finished you will be able to ressurect your phone
Good Luck!
Click to expand...
Click to collapse
2-flash Rom:
Connect phone usb with pc and Enter in download mode
Enter in download mode : Pull out battery then Hold Vol+ then connect usb cable to your phone then insert battery to your phone with Hold Vol+ .
run SmartFlashTool-3D and select mode Rom copy D/L and in destination binary file select CP.fls file in CP bin and select AP.bin file in AP bin from extract rom folder Then press Start .
After flash rom If the screen appears encryption unsuccessful
Make hard reset for phone by turn off phone then press hold down volume and power button and Make hard reset for phone.then restart phone.
Root:
Follow this method http://forum.xda-developers.com/showthread.php?t=2366916
1. Download This Drives and Install Them Both
2. Download This Root and Than Extract The Zip and Install The Root Program
3-A. In Your Phone Go To Settings -- Security And Enable Unknown sources
3-B. In Your Phone Go To Settings -- Developer options And Enable USB debugging
4. Connect your Phone To PC using Cable and Than Open The Root Program and Wait until u see your Device Name.
5. Your Phone Well Auto Reboot after Complete
6. Done
Install CWM & TRWP recovery mood :
install this as normal application and run after root your phone
https://docs.google.com/file/d/0Bwirw62bfRfeb2JPbEhKTXQ2OEE/edit?usp=sharing
FM Radio:
https://docs.google.com/file/d/0Bwirw62bfRfeX1BMWGFvMDVzSEk/edit?usp=sharing
extract then put FM Radio for ics 4.0.4 Lgp920.zip in external sd card then flash it by inter cwm mood recovery then choose install from sdcard then choose zip from sdcard then choose FM Radio for ics 4.0.4 Lgp920.zip
that's all after root phone and install cwm mood recovery.
Thank you for all
have a nice time

Oh really ?
Duplicating thread in each forum ?

Karim Kahale said:
Oh really ?
Duplicating thread in each forum ?
Click to expand...
Click to collapse
Hey... how is the name of 4.4?

p-vlad said:
Hey... how is the name of 4.4?
Click to expand...
Click to collapse
Karim Kahale said:
Oh really ?
Duplicating thread in each forum ?
Click to expand...
Click to collapse
this topic for a realistic experience My Phone works very well
I do not care if he was in another similarity with the theme is normal to use the same tools
All I want that permeated the interest of all
Thank you generally

lg p920 HELP PLEASE
I have a big problem with my lg p920 and i dont now haw tu fix him also and workers in the mobile shop dont now haw to fix my phone
i complete the step 2 and this is what i have
haw to proced ty step 3
plese plese help and sory for bed english

look
mire2406 said:
I have a big problem with my lg p920 and i dont now haw tu fix him also and workers in the mobile shop dont now haw to fix my phone
i complete the step 2 and this is what i have
haw to proced ty step 3
plese plese help and sory for bed english
Click to expand...
Click to collapse
download Rom and CONVERTE KDZ rom file to fls and bin file how Follow this method http://forum.xda-developers.com/showthread.php?t=1692191

Thanks a lot for such awesome post, I spend two full days trying to unbirck my LG O3D, I followed different threads and posts all over the internet and on the xda-developers site, the most easy to follow was your thread and in less than an hour I was able to bring my phone back to life!!

help me...lg p920
Please i really need your help. I have a big problem.
What really happened is that i first got my lg p920 rooted with cwm 6.01, then i backed up my current os which was android v2.3. After that, i loaded an os from sdcard named 'p920_PAC_jb-alpha-v18.0.0'. When i rebooted......the screen first show like its spoilt or broken, later the os came up but the os is 'BAD'.In short the os is BAAAD AND NOW my phone doesn't receive network, it hangs, reboots itself, and when i remove battery and insert back, the phone turns on itself.
please i need your help as to how to go back to my original lg p920 v 2.3 rom.
i have tried all ways to do it but not successful and i think the best way i can do now is if you can supply me a link where i can download original v2.3 rom which can be installed from sdcard using cwm.
Thanks in advance bro.
---------- Post added at 10:18 AM ---------- Previous post was at 10:12 AM ----------
yemi2003 said:
Please i really need your help. I have a big problem.
What really happened is that i first got my lg p920 rooted with cwm 6.01, then i backed up my current os which was android v2.3. After that, i loaded an os from sdcard named 'p920_PAC_jb-alpha-v18.0.0'. When i rebooted......the screen first show like its spoilt or broken, later the os came up but the os is 'BAD'.In short the os is BAAAD AND NOW my phone doesn't receive network, it hangs, reboots itself, and when i remove battery and insert back, the phone turns on itself.
please i need your help as to how to go back to my original lg p920 v 2.3 rom.
i have tried all ways to do it but not successful and i think the best way i can do now is if you can supply me a link where i can download original v2.3 rom which can be installed from sdcard using cwm.
Thanks in advance bro.
Click to expand...
Click to collapse
To add: my phone now RUN:
Android version 4.12 Base band: LGP920AT-00-V21G-EUR-XXX-JAN-15-2013+0
PAC VERSION 19.3.0
AOKP VERSION: P920_JB-MILESTONE-1
CYANOGENMOD VERSION: 10.0.0-P920
hELP PLEASE ....I WANNA GO BACK TO ORIGINAL ROM V2.3 USING preferably installing from sdcard
AND I HAVE DOWNLOADED ALL FILES REQUIRED ABOVE.

headbanger.gt said:
Thanks a lot for such awesome post, I spend two full days trying to unbirck my LG O3D, I followed different threads and posts all over the internet and on the xda-developers site, the most easy to follow was your thread and in less than an hour I was able to bring my phone back to life!!
Click to expand...
Click to collapse
You are welcome

yemi2003 said:
Please i really need your help. I have a big problem.
What really happened is that i first got my lg p920 rooted with cwm 6.01, then i backed up my current os which was android v2.3. After that, i loaded an os from sdcard named 'p920_PAC_jb-alpha-v18.0.0'. When i rebooted......the screen first show like its spoilt or broken, later the os came up but the os is 'BAD'.In short the os is BAAAD AND NOW my phone doesn't receive network, it hangs, reboots itself, and when i remove battery and insert back, the phone turns on itself.
please i need your help as to how to go back to my original lg p920 v 2.3 rom.
i have tried all ways to do it but not successful and i think the best way i can do now is if you can supply me a link where i can download original v2.3 rom which can be installed from sdcard using cwm.
Thanks in advance bro.
---------- Post added at 10:18 AM ---------- Previous post was at 10:12 AM ----------
To add: my phone now RUN:
Android version 4.12 Base band: LGP920AT-00-V21G-EUR-XXX-JAN-15-2013+0
PAC VERSION 19.3.0
AOKP VERSION: P920_JB-MILESTONE-1
CYANOGENMOD VERSION: 10.0.0-P920
hELP PLEASE ....I WANNA GO BACK TO ORIGINAL ROM V2.3 USING preferably installing from sdcard
AND I HAVE DOWNLOADED ALL FILES REQUIRED ABOVE.
Click to expand...
Click to collapse
No way introduced by the SD Card
Try this http://forum.xda-developers.com/showthread.php?t=1942836
or my thread http://forum.xda-developers.com/showthread.php?p=44507809#post44507809

GrMo Hady said:
The complete solution to repair dead boot and unbrick and update & root LG P920 O3D to Android 4.0.4 without any problems with the official Rom ICS{ all fix}full 3D and camera work perfect all the most languages support.
Before anything make sure that all LG Drivers and everything Installed
LG Drivers https://docs.google.com/file/d/0Bwirw62bfRfebUNQNjJzUHlNbHM/edit?usp=sharing
First, download the following files:
1- flash fastboot and Replace the original boot and download mode http://www.mediafire.com/download/b...for_optimus-v1.22+modified+by+XcachorroX®.rar
2- download Rom http://csmgdl.lgmobile.com/swdata/WDLSW/LGP920/ANEUML/V30a_00/V30A_00.kdz
3- LG-P970 ROM to converter KDZ rom file to fls and bin file http://www.mediafire.com/download/xbxacly4195v7xb/LG-P970+ROM+COVERTER+2.1.exe
4- download SmartFlashTool-3D to flash rom by fls and bin file https://docs.google.com/file/d/0Bwirw62bfRfeY0hKNjlqZFRSdUU/edit?usp=sharing
Second
Instructions:
After downloading the files previous
1- CONVERTER KDZ rom file to fls and bin file Follow this method http://forum.xda-developers.com/showthread.php?t=1692191
2- flash fastboot and Replace the original boot and download mode Until the fastboot is the basic boot for device.
Connect phone without battery,phone detect OMAP4430 {device manager}
Install driver omap "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) by select update driver then select browse my computer for driver {install driver Manual}View attachment 2067365
After driver installation ends remove usb cable
Run start_fastboot.bat and select option 2
Pull out battery
Hold Vol+
Connect USB cable, the usbboot will start
Insert battery while the usbboot is waiting
and follow the instructions,after this you see logo LG Gray in phoneView attachment 2067366 He asks you entered fastboot Answer no and accept to flash and Replace the x-loader / u-boot source
If the LG COSMO appears in device manager install driver for her by select update driver then select browse my computer for driver {install driver Manual} and select Install driver from "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) then try again step 2 flash fastboot
3- Connect phone usb with pc and Enter in download modeView attachment 2067367 and run SmartFlashTool-3D and select mode Rom copy D/L and in destination binary file select CP.fls file in CP bin and select AP.bin file in AP bin from Converted ROM Then press Start .
After flash rom If the screen appears encryption unsuccessful
Make hard reset for phone by turn off phone then press hold down volume and power button and Make hard reset for phone.then restart phone.
Root:
Follow this method http://forum.xda-developers.com/showthread.php?t=2366916
Thank you for all
have a nice time
Click to expand...
Click to collapse
i just do...but why notif and status bar....Blank SdCard and i am check in storage...( Internal Storage not detect ) only system memory detect
and i am slide notif blank sdcard and format....and I'm happy....my sdcard come back...but...why my signal not detect ?
Thanks

milocrew said:
i just do...but why notif and status bar....Blank SdCard and i am check in storage...( Internal Storage not detect ) only system memory detect
and i am slide notif blank sdcard and format....and I'm happy....my sdcard come back...but...why my signal not detect ?
Thanks
Make hard reset for phone by turn off phone then press hold down volume and power button and Make hard reset for phone.then restart phone.
What do you mean signal not detect? signal what ?
Click to expand...
Click to collapse

Can't hard reset the phone after flashing rom
First thank yu for this awesome thread.
I did all the step but after flashing AP.bin and CP.fls with SmartFlashTool i can't hard reset the phone. the phone restart and start charging battery.
Whe i press hold down volume and power button the phone stuck at LG logo and nothing happened.
Am I missing something?
Need your help
Thank you!

What is your problem required?
xperbaron said:
First thank yu for this awesome thread.
I did all the step but after flashing AP.bin and CP.fls with SmartFlashTool i can't hard reset the phone. the phone restart and start charging battery.
Whe i press hold down volume and power button the phone stuck at LG logo and nothing happened.
Am I missing something?
Need your help
Thank you!
Click to expand...
Click to collapse
After flash rom If the screen appears encryption unsuccessful
Make hard reset
What is your problem required?
its your phone not boot os after flash or stuck at LG logo withe security error ?or what ?

GrMo Hady said:
After flash rom If the screen appears encryption unsuccessful
Make hard reset
What is your problem required?
its your phone not boot os after flash or stuck at LG logo withe security error ?or what ?
Click to expand...
Click to collapse
Thanks for the quick reply.
The phone not boot os after flash, i just get LG logo for about 2-3 sec when phone reboot after flash and then it starts charging the battery.
After flash he screen doesn't appear encryption and i get no LG logo withe security error.
When i press the power button to start the phone i still get stuck on LG logo.

wont stay in download mode
thank you for the nice tutorial, everything worked fine up until the actual flashing when i attempted to flash the phone it worked but my phone automatically switched out of download mode and back into flashboot which cancels the flash Ive tried a few times so if somebody knows how to fix this id appreciate the help

I think that is already stated in the post..

xperbaron said:
Thanks for the quick reply.
The phone not boot os after flash, i just get LG logo for about 2-3 sec when phone reboot after flash and then it starts charging the battery.
After flash he screen doesn't appear encryption and i get no LG logo withe security error.
When i press the power button to start the phone i still get stuck on LG logo.
Click to expand...
Click to collapse
You should re-flash Fastboot until Fastboot main boot for device
then flash rom and make sure you installed all driver
flash fastboot and Replace the original boot and download mode Until the fastboot is the basic boot for device.
Connect phone without battery,phone detect OMAP4430 {device manager}
Install driver omap "inside folder have drivers"(omap4boot-for_optimus-v1.22 modified by XcachorroX®\usb_drv_windows) by select update driver then select browse my computer for driver {install driver Manual}
After driver installation ends remove usb cable
Pull out battery
Run start_fastboot and select option 2 when is waiting for omap44 connect usb cable to your phone he start .
then insert battery to your phone when is waiting5 Seconds and follow the instructions on screen after this you see logo LG Gray in phone and He asks you entered fastboot Answer no and accept to flash and Replace the x-loader and u-boot source then inter to download mood and flash rom again .

chocit said:
thank you for the nice tutorial, everything worked fine up until the actual flashing when i attempted to flash the phone it worked but my phone automatically switched out of download mode and back into flashboot which cancels the flash Ive tried a few times so if somebody knows how to fix this id appreciate the help
Click to expand...
Click to collapse
Because you have to re-flash Fast boot until boot main boot for device
Pull out battery
Run start_fastboot and select option 2 when is waiting for omap44 connect usb cable to your phone he start .
then insert battery to your phone when is waiting5 Seconds and follow the instructions on screen after this you see logo LG Gray in phone and He asks you entered fastboot Answer no and accept to flash and Replace the x-loader and u-boot source then inter to download mood and flash rom again .

Root BLU VIVO IV KITKAT 4.4.2

i am not responsible for damaged devices though this may not happen warning Please make backup of system after installing recovery MTK tools for some odd reason due to lack of proper drivers wont detect ur phone
Hello to all BLU vivo iv users this thread is for gaining root access after updating your blu vivo iv to 4.4.2 usually it can't be rooted properly u can get root via recovery install method but root explorer and other root apps will not get proper su access but it won't work or will fail constantly to complete system operations meaning u can't edit system at all!!!:crying:
I made an insecure boot.img with more adb access seeing that it does not have much developer options in settings it still wont but this boot img will allow proper root.
first u must install Carliv recovery from here not my work this is for Gionee elife s5.5 but vivo iv is same device so it's safe tested myself :http://elifes55.blogspot.com/2014/07/guidegionee-elife-s55-cwmroot-required.html
use mobile uncle from market and update recovery choose recovery.img first item at top of the list the downloaded recovery img must be in base of internal storage do not place in any folders!!!
after that reboot to recovery vol up + power scroll with vol keys power to select scrool to install zip then scroll down to install from internal sdcard choose "bootimgADB.zip" wait for install to finish wipe dalvik and cache (ps when doing this it takes about a min or two idk why just dont panic and think your phone is stuck)
after that procedure continue to rooting using Vroot / root genius
Vroot: http://vrootdownload.org/
Root genius: http://www.shuame.com/en/root/
download root checker from market to check for root
Screenshot
https://www.dropbox.com/s/1iyfst24ye3bm1s/Screenshot_2014-08-21-10-48-26.png

update
please install supersu.zip after boot img flash in recovery then root over with root genuis

Thanks a lot for that information. There is not a lot of help aroudn for Vivo iv owners!!!
I have a problem before i reach 4.4.2, as the OTA update will not install correctly.
I have a rooted phone, with recovery installed.
I downloaded the OTA update, installed it, then it booted to recovery and gave the following errors:
CWM automade 10.07.20014 00:34:23
E:Invalid command argument
Finding update package...
E:unknown volume for path [/storage/sdcard0/adupsfota/update.zip]
E:Can’t mount /storage/sdcard0/adupsfota/update.zip
Installation aborted.
Any idea what this means? I tried unrooting my phone, and installing the OTA update again, but it gave the same error. I have emailed Blu, but i'm sure they will be unhelpful. I've tried googlin, and other people (with different devices) with similar errors from OTA updates say you cannot install the update.zip directly from recovery otherwise it gives:
assert failed: getprop("ro.product.device" == "**********" || "ro.build.product" == "*************"
E:Error in /sdcard/downloaded_rom/***********.zip
...errors. Which from some peoples replies also gets their phone stuck on bootloop, so I don't want to try that.
Any ideas how to get this OTA kitkat update installed? Did yours update normally (with.without root/recovery)?
Thanks in advance

James666PKR said:
Thanks a lot for that information. There is not a lot of help aroudn for Vivo iv owners!!!
I have a problem before i reach 4.4.2, as the OTA update will not install correctly.
I have a rooted phone, with recovery installed.
I downloaded the OTA update, installed it, then it booted to recovery and gave the following errors:
CWM automade 10.07.20014 00:34:23
E:Invalid command argument
Finding update package...
E:unknown volume for path [/storage/sdcard0/adupsfota/update.zip]
E:Can’t mount /storage/sdcard0/adupsfota/update.zip
Installation aborted.
Any idea what this means? I tried unrooting my phone, and installing the OTA update again, but it gave the same error. I have emailed Blu, but i'm sure they will be unhelpful. I've tried googlin, and other people (with different devices) with similar errors from OTA updates say you cannot install the update.zip directly from recovery otherwise it gives:
assert failed: getprop("ro.product.device" == "**********" || "ro.build.product" == "*************"
E:Error in /sdcard/downloaded_rom/***********.zip
...errors. Which from some peoples replies also gets their phone stuck on bootloop, so I don't want to try that.
Any ideas how to get this OTA kitkat update installed? Did yours update normally (with.without root/recovery)?
Thanks in advance
Click to expand...
Click to collapse
did u try choose zip from internal then update.zip but still try to get the update.zip for me
yes it would install with root but not custom recovery i kept my stock recovery cuz i knew blu would be releasing KITKAT btw amigo OS ruined KITKAT its like if it didn't update at all
hmm u have the answer at the start custom recovery may not install an official rom update though i may be wrong but if u can get the update.zip where it downloaded on your storage i can poke around and design it to flash via custom recovery
please in future do NOT!!!! install custom recovery before official update it gives probs
since u have the recovery there is an miui rom u can try to install from gionee elife s5.5 make sure u backup though its based on 4.2.2

thanks very much! I will upload the update.zip. I really only need kitkat for an app I am trying to use (which only works on 4.3 and newer) so the MIUI rom won't be of use to me.
If you could have a poke around and create a custom recovery that will boot it, that would be amazing, I will upload the update.zip now. I would forever be in your gratitude.
Also is there a way of removing custom recovery from the phone?
---------- Post added at 09:24 PM ---------- Previous post was at 09:18 PM ----------
P.S. yes I also tried to install from zip using the custom recovery, but it said it couldn't mount /sdcard0 or /system or anything when I tried. I think the best option is for me to find a method of removing my custom recovery?

Th elink to the KitKat 4.4.2 update.zip is here: http://we.tl/FGgNDO2ts2
It will only be available online until the 31st August, so if anyone wants to download it/play with it etc... then do so before then.
Thanks a bunch!
P.S. I've bricked my phone trying to mess around in CWM... hoping my nandroid backup restores properly!

James666PKR said:
Th elink to the KitKat 4.4.2 update.zip is here: http://we.tl/FGgNDO2ts2
It will only be available online until the 31st August, so if anyone wants to download it/play with it etc... then do so before then.
Thanks a bunch!
P.S. I've bricked my phone trying to mess around in CWM... hoping my nandroid backup restores properly!
Click to expand...
Click to collapse
so u finally bricked it just soft brick right ?
notice something strange it says it can't mount storage yet it backed up your rom it's probably just update script that needs tweaking

Possible Vanilla KITKAT rom
took rom from blu life 8 ported it it booted but got stuck on starting apps once boot.img seems to be giving the errors just have to pull boot from life 8

Pretty sure i've hard bricked it now
Tried to flash the update.zip using SP flashtool, but my phone wont even turn on/go to recovery now.. Computer detects it, but just a blank screen ... going to see if fastboot works, then try and manually install the boot.img etc...
---------- Post added at 01:32 AM ---------- Previous post was at 01:10 AM ----------
If anyone has any idea how I can unbrick my phone I would be all ears...
I have tried all combinations of buttons, but the screen just won't turn on. When I press power+volume up+volume down, the flash on the back, flashes once... but thats it... why is there no information about bricked vivo iv's or gionee elife s5.5's on the internet

James666PKR said:
Pretty sure i've hard bricked it now
Tried to flash the update.zip using SP flashtool, but my phone wont even turn on/go to recovery now.. Computer detects it, but just a blank screen ... going to see if fastboot works, then try and manually install the boot.img etc...
---------- Post added at 01:32 AM ---------- Previous post was at 01:10 AM ----------
If anyone has any idea how I can unbrick my phone I would be all ears...
I have tried all combinations of buttons, but the screen just won't turn on. When I press power+volume up+volume down, the flash on the back, flashes once... but thats it... why is there no information about bricked vivo iv's or gionee elife s5.5's on the internet
Click to expand...
Click to collapse
if the computer still detects it it can be saved so its not totally dead the update.zip wont install via sp tool there is a gionee firmware u can try but it might kill the phone with certain files will just have to uncheck them does sp tool detect ur phone? i backed up my 4.2.2 system.img i'll upload it and then u can try it on sp tool

taalibj01 said:
if the computer still detects it it can be saved so its not totally dead the update.zip wont install via sp tool there is a gionee firmware u can try but it might kill the phone with certain files will just have to uncheck them does sp tool detect ur phone? i backed up my 4.2.2 system.img i'll upload it and then u can try it on sp tool
Click to expand...
Click to collapse
I've tried responding to your PM, but my messages aren't being registered as sent!
If you did recieve them (2 now) awesome, if not, write me here and i'll respond.
I would love to use your 4.2.2 image if you ocudl upload it. I would be forever grateful!

4.2.2 system.img
well here it is https://www.dropbox.com/s/gd95xz06j2oy6pb/system.img?dl=0
you may need to rename it to android.img maybe but try system first
hey could u upload the drivers u used for ur phone i installed almost every driver known to man kind and mtk tools still doesn't recognize the device

taalibj01 said:
well here it is https://www.dropbox.com/s/gd95xz06j2oy6pb/system.img?dl=0
you may need to rename it to android.img maybe but try system first
hey could u upload the drivers u used for ur phone i installed almost every driver known to man kind and mtk tools still doesn't recognize the device
Click to expand...
Click to collapse
Just downloading now.
I was using the drivers that windows installs 'from the phone' when you plug it into windows. Those drivers worked fine... I then started messing around with downloaded drivers (probably all the same ones you have tried) and all of them just did the same thing or didn't work.
FYI, MTK Tools no longer detects my phone. It only detected it when it was booted (in CWM for me, I never tried it when it was actually working, in the OS). My phone only gets detected in 'device manager' and 'SP flashtool' sometimes.
I can upload all the drivers I tried downloading, but I think the more drivers you install, the more incompatibility there is... In the end I downloaded USBDeview and uninstalled all the 'phone' related drivers on my computer, then just used the drivers that automatically get installed when you plug your phone in.
I'm just researching how to flash this system.img file you have uploaded (thanks), using SP Tools. If you've done it before could you let me know how? I don't want to mess anything else up now.
Thanks.

I managed to install Gionee Elife s5.5 ROM using SP Flashtool easily, and my phone now works!! Well, sort of.
The screen keeps freezing, touch screen keeps now working (have to press sleep button, to refresh it).
I am hoping the OTA update will fix all these problems! Fingers crossed...
I really want to get the Blu Vivo iv firmware though, as there are loads of chinese characters on this phone, even with English language on.
If anyone could backup their phone using MTK tools, and upload the entire backup for me and everyone else that needs it, that would be great! Then anyone who bricks their phone could unbrick it by flashing the firmware useing SP Flashtool!
Thanks for eveyrone's help especially taalibj01!!!! You are a legend!

Don't know how it's possible but here it is Blu Firmware files!!!!!
James666PKR said:
I managed to install Gionee Elife s5.5 ROM using SP Flashtool easily, and my phone now works!! Well, sort of.
The screen keeps freezing, touch screen keeps now working (have to press sleep button, to refresh it).
I am hoping the OTA update will fix all these problems! Fingers crossed...
I really want to get the Blu Vivo iv firmware though, as there are loads of chinese characters on this phone, even with English language on.
If anyone could backup their phone using MTK tools, and upload the entire backup for me and everyone else that needs it, that would be great! Then anyone who bricks their phone could unbrick it by flashing the firmware useing SP Flashtool!
Thanks for eveyrone's help especially taalibj01!!!! You are a legend!
Click to expand...
Click to collapse
https://www.dropbox.com/s/qt0i6d2og8ge0sc/BLU_D970l_V11_GENERICK_T8493.zip?dl=0

I hereby nominate you for a knight-hood. I will contact the Queen and get her to knight you 'Sir Amazing'!!! I'm downloading now, will let you know how it goes and if it all works correctly!!!

Blu vivo iv drivers
these drivers are for gionee and Blu vivo iv just install its auto install so its easy
https://www.dropbox.com/s/x8umdofqgwbjbr1/GN_Driver_V1.3.0_Test.rar?dl=0
https://www.dropbox.com/s/yk08ekq3hf23zs0/MauiMETA_exe_3G_v6.1336.1.rar?dl=0

taalibj01 said:
https://www.dropbox.com/s/qt0i6d2og8ge0sc/BLU_D970l_V11_GENERICK_T8493.zip?dl=0
Click to expand...
Click to collapse
If you have bricked your Blu Vivo iv, or installed a custom recovery therefore could not upate OTA to KitKat 4.4.2, look here!
So everyone who needs to flash the new KitKat firmware from Blu follow these instructions!
Download the following file: https://www.dropbox.com/s/qt0i6d2og8ge0sc/BLU_D970l_V11_GENERICK_T8493.zip?dl=0
(Supplied by the amazing 'taalibj01')
If you have not previously installed the MTK drivers (usually installs from the phone when you plug it into the computer) please download and install from here:
https://www.dropbox.com/s/x8umdofqgw..._Test.rar?dl=0
https://www.dropbox.com/s/yk08ekq3hf...336.1.rar?dl=0
Also download/extract SP Flash tool from here (latest version): http://androidxda.com/smart-phone-flash-tool
Before you start, when you connect your 'powered off' phone via USB cable whilst holding the up button, your phone should be recognised in 'device manager' as 'MTK COM USB (COM4)' or something similar, under the 'Ports (COM & LPT)' section. If it is not, then you need to install the relevant drivers (above).
Now you are ready to get started.
Turn off your Vivo iv phone and disconnect it from USB.
Unzip the BLU_D970l_V11_GENERICK_T8493.zip file to any location.
Open SP Flash Tool, and click the 'scatter-loading' button.
Navigate to the unzipped BLU_D970l_V11_GENERICK_T8493 firmware folder.
Double click the MT6592_Android_scatter.txt file
SP Flash Tool will then list all of the files it has read form the scatter file and automatically 'tick/check' each of the 'preloader/MBR/EBR1/UBOOT/BOTIMG etc... files.
Most guides will tell you to press the select 'Download' from the drop down menu, but I kept getting an error message, but if you highlight 'Firmware Upgrade' from the drop down box, you should be fine.
Click the 'Download' green button.
Now plug your phone in whilst holding 'volume up' button.
SP Tools should recognise the phone, and the bar along the bottom should turn RED. The phone will disconnect, then recconnect again after a few seconds, and the bar will turn Yellow and it will say 'Formatting', then it will Flash the files to your phone which should take 30 seconds or so.
After it is done, a nice green circle saying DONE will pop up. You can now disconnect your phone, wait a few seconds, then power on using the power button.
All Done!!! KITKAT is now installed on your bricked phone!
Enjoy!

Hello, thanks for making this thread! Not much help out there for this phone. I started following your instructions, and immediately ran into a problem. On the step below...
taalibj01 said:
use mobile uncle from market and update recovery choose recovery.img first item at top of the list the downloaded recovery img must be in base of internal storage do not place in any folders!!!
Click to expand...
Click to collapse
...I opened the Mobile Uncle app on my phone, went to update recovery option, and chose the recovery.img from my SD card. The app popped up a message that read...
Mobile Uncle said:
Please Root your Android first!!
Click to expand...
Click to collapse
I just got the phone a few days ago, and it had KitKat 4.4.2 already installed from the factory. What do I need to do? Thanks!

Well I solved the problem. I downloaded Kingo Root and it successfully rooted my phone! I ran Mobile Uncle to verify, and it confirmed my root status.
My question now is, should I install the Carliv recovery, and flash bootimgADB.zip? Or, am I good to go now? I have SuperSU v2.02 installed. Thanks!
---------- Post added at 09:55 AM ---------- Previous post was at 09:09 AM ----------
So, I went ahead and tried to install the recovery.img using Mobile Uncle. It ran for a second, then a pop-up asked to reboot into recovery mode. I hit ok, but it rebooted into the orange and grey stock android system recovery.
So, I figured I would try to install the bootimgADB.zip from SD card, but it just comes back with installation aborted.
Any thoughts?

[Q] [HELP] ASUS ME181c(K011) firmware please

i rooted me181c(k011) and modified bulid.prop. after reboot device, it is in loop-booting.
i can enter recovery mode but there is no stock firmware on internet anywhere.
there is anybody know how to recovery flashing me181c or who have mo181c stock firmware or extract stock firmware that can be used in recovery mod?

nakwonelec said:
i rooted me181c(k011) and modified bulid.prop. after reboot device, it is in loop-booting.
i can enter recovery mode but there is no stock firmware on internet anywhere.
there is anybody know how to recovery flashing me181c or who have mo181c stock firmware or extract stock firmware that can be used in recovery mod?
Click to expand...
Click to collapse
i guess this thing has what you want

during boot loop, are u able to connect using adb?

yes
fake_japanese_guy said:
during boot loop, are u able to connect using adb?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
me176c(same intel Bay Trail Z3745 and simular spec) has firmware in asus website, but me181c don't. so, i cannot do anything

I don't know if the OP fixed his boot issue, but I wanted to post my experience with this tablet. I tried to root using RootZenFone 1.4.2 and it failed. Found a newer version 1.4.5r so I uninstalled 1.4.2. Then disaster struck. Now, keep in mind, I copy my downloads to my SD card and delete them from the device in case I need the files again or I brick the device and have to return it.
I went ahead a rebooted and ended up with the No Command and the dead Android. Holding the Volume Up while pressing power put me into fastboot, so I tried to do a recovery from there. No dice, same No Command. I tried simply powering off and tried again. Still either No Command or just Fastboot. While in fastboot, I tried to use Kango to root (Hoping it'd fix whatever damage RootZenFone did) and kept getting NeedADB errors. Obviously I couldn't turn on USB debugging.
Then, I decided one last ditch effort before I took the tablet back to best buy (Technically I hadn't voided the warranty since it never did root and attempting to root would be virtually impossible to detect since no files were left on the device - they're on my SD card). I powered off the tablet. While the tablet was still plugged into my PC, I held BOTH the Volume Up and Volume Down buttons and then pressed power. I got the typical ASUS logo, which I was getting before the No Command and Fastboot, but this time the tablet just sat there at that logo. I let it be for a few minutes while I took the dogs out. Maybe about 10 minuted. Suddenly, I heard the new device sound from my PC. it was installing the MTP driver! Looking at the tablet, it now had the Intel Inside logo (That I did not get while I was having boot issues) and about 45 seconds later the tablet is booted normally.
So, for what it's worth, I'd say hold both volume buttons as you power it on and see what happens.

Stock ROMs and Kernel Source for ME181C
Looks like we now have Stock ROMs and kernel source for ME181C on asus dot com at;
/uk/Tablets/ASUS_MeMO_Pad_8_ME181C/HelpDesk_download/
I have model K011, which I think is ME181C.

needing help
First, i would like to say sorry i am not sure how i would post under the correct area. Just saw the reply so figured i would write here.
I have been doing research on how to fix my Trio Stealth-10 ( thought it was a 10.1 but now not sure) MST10-21. 16 gb.
I have done all the factory resets and erasing data and what not under the boot load (not sure if thats what it was called) but the one where i hold down the power button and the vol - did all that i can get my tablet to connect and do all i need it to but now it isnt downloading any aps under google play or updating them so i just have a factory tablet that i cannot add anything on. sometimes will seem like it tried to down load and will just say no internal storage or memory something like that has not said anything lately since i have tried today.
please break things down barney style for me as well i can do comp stuff sometimes but i will say all of you on this site are much smarter then me thanks for the help guys
oh if i can have someone tell me where to actually post this would be awesome

Asus ME181C k011 Bootloop Fix
I bit the bullet today and put this thing in a bootloop to test a restore method. Happy to say it worked. Here we go:
1. https://cloud.mail.ru/public/2b47381cb37c/ADB.rar - This contains adb and fastboot if you don't already have them installed. This also contains the system image that we're going to use temporarily to get this thing restored.
2. Hook it up to your computer and load up Fastboot on the tablet (Volume+ and Power while booting. Let go of power after the logo shows up).
3. Flash the System image ( fastboot flash system system.img) followed by the boot image (fastboot flash boot boot.img)
4. Reboot.
5. https://www.androidfilehost.com/?fid=95857557620392052 - Next, we're going to use a temp version of CWM-Recovery to reinstall firmware. Enable USB debugging, run launcher.bat, type "ACCEPT" and choose T3.
6. You'll auto reboot into CWM-Recovery. Grab the official firmware from the Asus site and install the zip from SD. Once complete, you'll need to reroot the device most likely. If you have a SuperSU zip, install it after you've restored the system.
You're done. This also opens us up for just about anything. Go play with your system. As long as you don't mess up your boot loader, this should save you.

Thanks so much RemmyLee
i just wanted to join and say thanks to RemmyLee.
i rooted my me181c and deleted a whole bunch of stuff i shouldn't.
i could get in to recovery but after that "No Command" screen it wouldn't do a thing. i followed RemmyLee's instructions up to step 4 and then did a reboot as told. Whereupon it found the extracted UL-K011-WW-3.1.23.172-user.zip on the root of my SD card and asked me to do an update which succeeded.
Thanks RemmyLee !

annabel82 said:
i just wanted to join and say thanks to RemmyLee.
i rooted my me181c and deleted a whole bunch of stuff i shouldn't.
i could get in to recovery but after that "No Command" screen it wouldn't do a thing. i followed RemmyLee's instructions up to step 4 and then did a reboot as told. Whereupon it found the extracted UL-K011-WW-3.1.23.172-user.zip on the root of my SD card and asked me to do an update which succeeded.
Thanks RemmyLee !
Click to expand...
Click to collapse
What were the things you have deleted but should not had? About to do the same :cyclops:

Fully Working Method! have to try it a few times, but ultimately Tablet is alive Back!

Root works perfectly! ME181C K011

RemmyLee said:
I bit the bullet today and put this thing in a bootloop to test a restore method. Happy to say it worked. Here we go:
1. https://cloud.mail.ru/public/2b47381cb37c/ADB.rar - This contains adb and fastboot if you don't already have them installed. This also contains the system image that we're going to use temporarily to get this thing restored.
2. Hook it up to your computer and load up Fastboot on the tablet (Volume+ and Power while booting. Let go of power after the logo shows up).
3. Flash the System image ( fastboot flash system system.img) followed by the boot image (fastboot flash boot boot.img)
4. Reboot.
5. https://www.androidfilehost.com/?fid=95857557620392052 - Next, we're going to use a temp version of CWM-Recovery to reinstall firmware. Enable USB debugging, run launcher.bat, type "ACCEPT" and choose T3.
6. You'll auto reboot into CWM-Recovery. Grab the official firmware from the Asus site and install the zip from SD. Once complete, you'll need to reroot the device most likely. If you have a SuperSU zip, install it after you've restored the system.
You're done. This also opens us up for just about anything. Go play with your system. As long as you don't mess up your boot loader, this should save you.
Click to expand...
Click to collapse
Please help! I did exactly as you said, but when I get into CWM and choose the file from my sdcard, it comes back and says:
Code:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
And goes straight back to the menu. No error messages or anything.

There is another zip file inside UL-K011-WW-3_1_23_172.zip.
1) Extract UL-K011-WW-3_1_23_172.zip
2) Rename UL-K011-WW-3.1.23.172-user.zip to user.zip.
Then follow Tethered CWM recovery steps.
gtamgs15 said:
Please help! I did exactly as you said, but when I get into CWM and choose the file from my sdcard, it comes back and says:
Code:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
And goes straight back to the menu. No error messages or anything.
Click to expand...
Click to collapse

Hi guys is there anyway to load firmware without root. I just received device but after charging and pressing power I get the message "NO COMMAND" I tried recovery but I''m only giving the option to reboot go into recovery or Botreboot. So it sounds like recovery is not installed. I am trying to avoid sending it back. Is it possible to load original firmware without root?????

i have reached step 5. then when i press T3 and hit enter it says ERROR FAILED TO COMMUNICATE WITH DEVICE
please help me i am new to this and i have ruined my tablet. if i dont manage to reinstall stock firmware i wont be able to use it.

Yeaaah thanks for the method, works succesfully

[RECOVERY][BOOT][ROOT][VFD-1400] Vodafone Prime Tab 7

DISCLAIMER: I WILL NOT BE HELD LIABLE FOR ANY DAMAGE TO YOUR DEVICE BY USING THIS METHOD
Warning: this will only work with the older firmware (Android 6.0.1/1BEBFDB1 )
What this will achieve:
You will flash a modified boot image that runs selinux in permissive mode.
You will flash a custom recovery that allows you to root the device.
After you are done, your userdata will most likely not be encrypted anymore. You can re-enable encryption in the system settings.
DOWNLOAD
1. Install the usb drivers that come with the device, in /system/etc/USBDriver.iso.
They are also in the download package, in USBDriver/.
Run Setup.vbs.
Also install SUGAR QCT_SP v11.1.2 Setup.exe from the download package.
2. Connect your device to your computer and boot it into EDL mode (enable usb debugging).
adb.exe reboot edl
3. Run SUGAR QCT_SP (use credentials from download package), select VF1400 device and click on the upgrade button.
It will download the latest official firmware update into "C:\Program Files (x86)\SUGAR QCT_SP_Gotu2\bin\VF1400-2AVXXXX" (VF1400-2AVDDE1, for me).
After the download is done and the flashing started, make a copy of the VF1400-2AVXXXX folder to your Desktop.
4. While the flashing is going on, we can start to modify out copy of VF1400-2AVXXXX.
In it should be a folder, most likely called 1BEBFDB1 (version number of the update).
Inside that folder should be the .mbn files we care about: B1BEB0B0CD00.mbn (boot image) and R1BEB0B0CD00.mbn (recovery image).
Possibly they will be called differently, but I assume the boot image always starts with B and the recovery with R.
You can check "C:\Program Files (x86)\SUGAR QCT_SP_Gotu2\tool\logs\Sugar_XXXXXXXX.log" to make sure which file is which.
Replace B1BEB0B0CD00.mbn with boot.img from the download and R1BEB0B0CD00.mbn with recovery.img.
5. After the flash is done and the device rebooted, put it in edl mode again (after enabling usb debugging).
adb.exe reboot edl
6. Now, *before* we start SUGAR QCT_SP again, copy the VF1400-2AVXXXX into "C:\Program Files (x86)\SUGAR QCT_SP_Gotu2\bin"
7. Start SUGAR QCT_SP, select VF1400 device and hit upgrade.
Congratulations! After flashing and after the next reboot you are running with selinux in permissive mode and you can flash SuperSU from the recovery.
Now copy the latest SuperSU flashable zip into your internal storage and install it from recovery.
The recovery used is CM-13.0, device tree based on https://github.com/zwliew/android_device_xiaomi_land
Being compiled with prebuilt kernel from boot.img.

Works great! Thank you

Cool! Thanks alot!

Hi fused#1,
thanks for this, have you tried to install Xposed on this device after rooting it?
Best regards,
misterfx

Hi,
i've now tested and installed xposed.
You need this files: xposed-v87-sdk23-arm.zip, XposedInstaller_3.1.1.apk and for safety the xposed-uninstaller-20160829-arm.zip.
Install the xposed-v87-sdk23-arm.zip with recovery, after reboot install the XposedInstaller_3.1.1.apk.
Best wishes,
misterfx

TWRP recovery
Hello.
All work as expected, thanks a lot for that.
I wonder if someone have manage to install TWRP recovery.
I mainly interesting of NANDroid Backup i can take with TWRP recovery.
How can i do that?
Thanks at advance.

Hello,
is there any way to get ntfs oder exfat support on the vodafone tab prime 7 ?
at the moment, it is original, without rom changes.

Hi, I tried your guide today, but it failed at flashing the alternative bootloader and recovery. System was not able to boot anymore after flashing the second time with your altered files.
Display only showed "powered by android" and nothing else happened. Luckily I found out that you are able to switch back into EDL mode when this happens:
- Shut down device (disconnect any cable and press power until display switches off)
- Press Vol+ AND Vol- for about 10 seconds and then insert USB cable
-> "powered by android" label flashes up and then display goes black and voila you are in EDL mode again
---------------------
Here comes my question:
Is it possible that your bootloader and/or recovery are incompatible with latest FW version? Could you have a look at the current bootloader and recovery to get selinux in permissive mode again? I attached the original bootloader and recovery that was downloaded with SUGAR QCT_SP.

Hi,
quite possible.
I wasn't even aware of the new firmware version. Obviously this only works with the old firmware. I will make that clear in the original post.
What firmware/android version is it? Maybe I'll look into that today or tomorrow.
Cheers
edit: I'm not even being offered the new firmware. Can you upload all of it somewhere?
gandharva said:
Hi, I tried your guide today, but it failed at flashing the alternative bootloader and recovery. System was not able to boot anymore after flashing the second time with your altered files.
Display only showed "powered by android" and nothing else happened. Luckily I found out that you are able to switch back into EDL mode when this happens:
- Shut down device (disconnect any cable and press power until display switches off)
- Press Vol+ AND Vol- for about 10 seconds and then insert USB cable
-> "powered by android" label flashes up and then display goes black and voila you are in EDL mode again
---------------------
Here comes my question:
Is it possible that your bootloader and/or recovery are incompatible with latest FW version? Could you have a look at the current bootloader and recovery to get selinux in permissive mode again? I attached the original bootloader and recovery that was downloaded with SUGAR QCT_SP.
Click to expand...
Click to collapse

Hi,
it seems there is again a new fw, files named like R1BEJ0J0CD00.mbn, with security patch level of April 2017. A user flashed this with the root-patch, but he has no wifi anymore.
Thanks for a update
Best wishes,
MrFX

The procedure works, but I can not install from Supersu.zip recovery mode. I tried many versions but I always get this error:
E:filed to veryfy whole-file signature
E:signature verification failed
Istallation aborted.
Can someone help me

Hey @fused#1 , i have a problem. after flashing and rooting my wifi does not work. do you know why?

x.0ldB0y.x said:
Hey @fused#1 , i have a problem. after flashing and rooting my wifi does not work. do you know why?
Click to expand...
Click to collapse
I don't think this is compatible with the latest update for the device. If you are running thatthat could be the reason. It's possible they updated the radio firmware or whatever the **** it's called these days...

Hi fused#1,
have you a hint, i've now a 2nd device with the old fw (and saved old firmware files), but sugar_qct always do a update and downloads the new firmware... is it possible to flash the old, saved files?
Update: got it, renamed all old fw files to the new names, copied they to the new created directory (replaced new fw), and sugar_qct installed the old fw with the new file names.
Thanks,
MrFX

Hey misterfx,
can u do an tutorial, how u did it to flash the old fw?
I tryed many things but he doesnt accept the old files (and i dont know the new folder-name).
Would help many guys i think, thanks ^^

Hi,
you can download the new fw with sugar_qct (but while downloading, unplug the tab)... you now have the new folder name and the files inside it.
Rename ALL old firmware files (from backup) to the new names and copy they to the new fw folder and replace all files.
Then exit sugar_qct and start it again, it will find the "new" files... make upgrade.
Good luck,
MrFX
Neeschar said:
Hey misterfx,
can u do an tutorial, how u did it to flash the old fw?
I tryed many things but he doesnt accept the old files (and i dont know the new folder-name).
Would help many guys i think, thanks ^^
Click to expand...
Click to collapse

df
thank you

TWRP
Someone can find TWRP for VFD1400?

Vdf 1400 Old firmware
Would someone please upload the vdf1400 old firmware before the update of April 2017!!
I would like to install that Rom instead..
WiFi is not working while using this method for the new firmware..
Thanks

Vdf 1400 Old firmware
Anyone has a link for the old firmware VF1400-2AVDDE1 ....
Thanks in advance

FRP LOCK ON SAMSUNG DEVICES [Custom Binary Blocked by FRP] [Simple Trick]

Hey People,
I had just had an Google Play Services update and Integrate into /System by "Lucky Patcher"
But when restarting phone message appears "Custom Binary Blocked by FRP"...
with this problems occurred not only in System, but occurres in "Bootloader", "Recovery" mode also..
Now, here is the trick.-
1. Download your Mobile Stock ROM by Googling it with proper Model No. and Download "Odin" by Googling it.
2. Click "Volume Down", "Power" and "Home" button for 5 seconds...
3. When Download Mode appears, Connect Usb cable into your Computer.
4. Open Odin Program on your Computer,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Select "PDA" or "AP" option available, select your Stock ROM located on computer.
6. Now click "Volume UP' button in Download Mode to Continue.
7. Now click on "Start" button to start flashing.
8. When Flashing completes, just devices be restart automatically.
9. "Volia" , your devices will be intact with no removal or loss of any data or apps......
Enjoy..
If you persists any problem, report down in this thread.......
Note:- This Trick works on my Samsung Galaxy J2 Device. But if this problem raise, then simply flash your phone again...

My device is boot looping
How can I fix it ?

Raiteihei said:
My device is boot looping
How can I fix it ?
Click to expand...
Click to collapse
Which device are you using?? Send me the details of your device...

Sorry for replying to an older thread but i'm having the same issue.
The phone I have is a Samsung Galaxy s9+ (SM-G965F/DS is writen on the box).
I've downloaded firmware from sammobile and with Frija none of which worked (tried all of the Android 10 (Q) versions from sammobile)
I'm using Odin 3.14.50 and installed Samsung usb drivers from Samsung SmartSwitch.
I'm pretty sure the country code should be BGL (Bulgaria) but i haven't found a good way to check it with what i have accessible
The phone isn't rooted and hasn't been before nor has anyone tried to root it.
The issue appeared during normal use (was scrolling FB when it started stuttering and glitching and it restarted)
Samsung logo is not visible just Custom Binary Blocked by FRP
This is the download mode if it helps but i'm in a desperate need to recover this phone.

Gettre said:
Sorry for replying to an older thread but i'm having the same issue.
The phone I have is a Samsung Galaxy s9+ (SM-G965F/DS is writen on the box).
I've downloaded firmware from sammobile and with Frija none of which worked (tried all of the Android 10 (Q) versions from sammobile)
I'm using Odin 3.14.50 and installed Samsung usb drivers from Samsung SmartSwitch.
I'm pretty sure the country code should be BGL (Bulgaria) but i haven't found a good way to check it with what i have accessible
The phone isn't rooted and hasn't been before nor has anyone tried to root it.
The issue appeared during normal use (was scrolling FB when it started stuttering and glitching and it restarted)
Samsung logo is not visible just Custom Binary Blocked by FRP
This is the download mode if it helps but i'm in a desperate need to recover this phone.
Click to expand...
Click to collapse
At first, Dowload TWRP Recovery from here,
Samsung Galaxy S9+ (Exynos)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
After that Download FRP Destroyer.zip (Flashable Zip) from Here,
https://forum.xda-developers.com/attachments/frp_destroyer_v1-1-zip.4740182/
1. Open Odin, put mobile into download mode, At PDA section, select this "twrp Recovery" given link above. Try to flash it with it.
2.After that, Boot into recovery mode by pressing power+volume Up+ bixby button together.
3. If it boots into Twrp recovery, In TWRP, go to Mount -> Click Mount USB Storage-> Usb storage will detect on your computer.
4. Copy the Flashable zip into your Internal Storage. And unmount Internal storage in TWRP.
5.Go to Install Section in TWRP, select Install zip from below. Find Your flashable zip into /sdcard, flash the zip file.
6.Then go to Reboot section in TWRP, Select System. Check if "FRP Locked" is gone or not while booting.
If problem Doesn't resolve, try to flash whole firmware for your device, download from here,
Download Galaxy S9+ SM-G965F (BGL) G965FXXSEFUA1 in Samfw - Samsung firmware download
Galaxy S9+ SM-G965F (BGL - Bulgaria) G965FXXSEFUA1 Q(Android 10) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
*Please tell me about After Flashing TWRP recovery does your mobile Boots into TWRP successfully or not.*
Try this method, hope it will helps.
If doesn't then reply me..

Ashutosh1358 said:
At first, Dowload TWRP Recovery from here,
Samsung Galaxy S9+ (Exynos)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
After that Download FRP Destroyer.zip (Flashable Zip) from Here,
https://forum.xda-developers.com/attachments/frp_destroyer_v1-1-zip.4740182/
1. Open Odin, put mobile into download mode, At PDA section, select this "twrp Recovery" given link above. Try to flash it with it.
2.After that, Boot into recovery mode by pressing power+volume Up+ bixby button together.
3. If it boots into Twrp recovery, In TWRP, go to Mount -> Click Mount USB Storage-> Usb storage will detect on your computer.
4. Copy the Flashable zip into your Internal Storage. And unmount Internal storage in TWRP.
5.Go to Install Section in TWRP, select Install zip from below. Find Your flashable zip into /sdcard, flash the zip file.
6.Then go to Reboot section in TWRP, Select System. Check if "FRP Locked" is gone or not while booting.
If problem Doesn't resolve, try to flash whole firmware for your device, download from here,
Download Galaxy S9+ SM-G965F (BGL) G965FXXSEFUA1 in Samfw - Samsung firmware download
Galaxy S9+ SM-G965F (BGL - Bulgaria) G965FXXSEFUA1 Q(Android 10) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
*Please tell me about After Flashing TWRP recovery does your mobile Boots into TWRP successfully or not.*
Try this method, hope it will helps.
If doesn't then reply me..
Click to expand...
Click to collapse
Just to clarify flashing TWRP will not wipe the phone right?
I'm trying to recover the data as it has the highest priority and the phone working again is just a nice to have.

Trying trying to flash TWRP i get
"Custom Binary (RECOVERY) Blocked by FRP Lock"

Gettre said:
Just to clarify flashing TWRP will not wipe the phone right?
I'm trying to recover the data as it has the highest priority and the phone working again is just a nice to have.
Click to expand...
Click to collapse
No. It will not Flash or format the whole firmware or device. and yes, i know you have to Save your data the most of the phone. But in such situations, probably the phone has to be cleaned formatted to remove FRP completely.

Gettre said:
Trying trying to flash TWRP i get
"Custom Binary (RECOVERY) Blocked by FRP Lock"
Click to expand...
Click to collapse
here's i have a link over here, just try it.
Remove FRP Lock on Samsung with Combination File (Odin)
Here are some easy tricks to easily remove FRP lock on Samsung Galaxy devices by flashing Samsung combination file (firmware) using Odin.
technastic.com
But i think it can format your whole device. Because we have to mostly unlock the recovery partition from FRP. If recovery Partition has unlocked by FRP, There's 80-100% chances that you can save all your further data on phone if TWRP Recovery get booted on your phone.
Just have a try to given link, because we have just to "Bypass FRP" from the device in order to boot into recovery Partition.
If any problem persists, Please reply me with given screenshots.

Gettre said:
Trying trying to flash TWRP i get
"Custom Binary (RECOVERY) Blocked by FRP Lock"
Click to expand...
Click to collapse
I am giving this link to learning more from it. Mostly we have to bypass FRP for only one time.
Samsung FRP Bypass S9 Plus G965F, G965U, G965W - Pangu.in
After many requests, I am going to show you how to unlock or bypass Samsung Galaxy S9 and S9 plus FRP lock or Google account in android Oreo 8.0 and
pangu.in
Just when you try to flash your phone via odin, at flash completes, just try to boot into recovery mode, not let goto system start of your device.

Gettre said:
Sorry for replying to an older thread but i'm having the same issue.
The phone I have is a Samsung Galaxy s9+ (SM-G965F/DS is writen on the box).
I've downloaded firmware from sammobile and with Frija none of which worked (tried all of the Android 10 (Q) versions from sammobile)
I'm using Odin 3.14.50 and installed Samsung usb drivers from Samsung SmartSwitch.
I'm pretty sure the country code should be BGL (Bulgaria) but i haven't found a good way to check it with what i have accessible
The phone isn't rooted and hasn't been before nor has anyone tried to root it.
The issue appeared during normal use (was scrolling FB when it started stuttering and glitching and it restarted)
Samsung logo is not visible just Custom Binary Blocked by FRP
This is the download mode if it helps but i'm in a desperate need to recover this phone.
Click to expand...
Click to collapse
Stock ROMs aren't "custom", so they shouldn't be blocked. But before you try flashing from Odin, it might be a good idea to try restoring your corrupted system by performing a "factory reset" from the standard recovery. This won't wipe any pictures, videos, music or downloads, but will delete any apps you may have installed, along with their data. You WILL need your Google Account login and password when you first reboot after the reset. If that doesn't work, it may be a hardware malfunction and not firmware.

lewmur said:
Stock ROMs aren't "custom", so they shouldn't be blocked. But before you try flashing from Odin, it might be a good idea to try restoring your corrupted system by performing a "factory reset" from the standard recovery. This won't wipe any pictures, videos, music or downloads, but will delete any apps you may have installed, along with their data. You WILL need your Google Account login and password when you first reboot after the reset. If that doesn't work, it may be a hardware malfunction and not software.
Click to expand...
Click to collapse
The thing is i cannot enter recovery.
The only menu i can enter is Download menu.
I'm guessing the FW is toast

Gettre said:
The thing is i cannot enter recovery.
The only menu i can enter is Download menu.
I'm guessing the FW is toast
Click to expand...
Click to collapse
Yeah, it sounds like it is time to call 1-800-samsung.

Ashutosh1358 said:
I am giving this link to learning more from it. Mostly we have to bypass FRP for only one time.
Samsung FRP Bypass S9 Plus G965F, G965U, G965W - Pangu.in
After many requests, I am going to show you how to unlock or bypass Samsung Galaxy S9 and S9 plus FRP lock or Google account in android Oreo 8.0 and
pangu.in
Just when you try to flash your phone via odin, at flash completes, just try to boot into recovery mode, not let goto system start of your device.
Click to expand...
Click to collapse
I've flashed the phone with the software from sammobile but with the latest update (01.2022) and older in the same revision.
I can't get into recovery even with the software from frija.
The instructions require access to recovery but I wasn't able to get into it.
Twrp is still failing even with different versions
Should I try a phone repair shop? I just don't trust they will keep the data.
Edit: sorry this was for the other reply i will try this now
I've just checked the guide and it seems it will delete all the data.
Also i'm unable to find a file with my country code

Gettre said:
I've flashed the phone with the software from sammobile but with the latest update (01.2022) and older in the same revision.
I can't get into recovery even with the software from frija.
The instructions require access to recovery but I wasn't able to get into it.
Twrp is still failing even with different versions
Should I try a phone repair shop? I just don't trust they will keep the data.
Edit: sorry this was for the other reply i will try this now
I've just checked the guide and it seems it will delete all the data.
Also i'm unable to find a file with my country code
Click to expand...
Click to collapse
Okay. Just tell me Your Country and let me search a firmware for you..
Mostly in such cases, it's been hard bricked, that's why it can't going into recovery mode also.
I will find a firmware that's matches your device. Flash all of firmware on device. But it will remove your whole data. But your device be in working condition too.
If this doesn't resolve, kind go to samsung repair shop to troubleshoot it.

I'm using a Samsung s6 edge plus (sm-g928f) UK (XEU)

badmankilla said:
I'm using a Samsung s6 edge plus (sm-g928f) UK (XEU)
Click to expand...
Click to collapse
Sir, tell me your problem related to thread or related to other device issues ???
And you can send me sone screenshot of your problem if available??

hello @Ashutosh1358 can you help me find the combination firmware for my sm-g532G/ds

Hello guys just need combination file
J260f binary U9
Or remove Frp lock the phone only boot to download mode not Samsung logo no recovery
And thanks in advance

Ashutosh1358 said:
Sir, tell me your problem related to thread or related to other device issues ???
And you can send me sone screenshot of your problem if available??
Click to expand...
Click to collapse
Hi There I have the same problem where I cannot flash toany ROM and it just shows FRP Binary lock , please advise .