Database Info

Can't Update MZ608 to ICS

Hi guys,
I have an Bootloader unlocked MZ608 with 3.2.2.
Code:
0.268.4.MZ608.Retail.en.EU
1.6.0_268.4-MZ608
When I check for the update, I get 77.128.14.en.EU notification. I download it and say update. The system restarts and the update comes to a degree but then it fails showing up Android with exclamation mark.
I have downloaded Blur_Version.0.281.4.MZ608.Retail.en.EU and copied it to SD card. But I can not get into recovery mode to instal that too. When I try to get into recovery mode I get exclamation mark followed by a restart.
BTW, the device is MZ608 32 GB but it shows up in Motocast and device manager as MZ609.
What is the procedure that I should follow?
Thanks

cool_recep said:
Hi guys,
I have an Bootloader unlocked MZ608 with 3.2.2.
Code:
0.268.4.MZ608.Retail.en.EU
1.6.0_268.4-MZ608
When I check for the update, I get 77.128.14.en.EU notification. I download it and say update. The system restarts and the update comes to a degree but then it fails showing up Android with exclamation mark.
I have downloaded Blur_Version.0.281.4.MZ608.Retail.en.EU and copied it to SD card. But I can not get into recovery mode to instal that too. When I try to get into recovery mode I get exclamation mark followed by a restart.
BTW, the device is MZ608 32 GB but it shows up in Motocast and device manager as MZ609.
What is the procedure that I should follow?
Thanks
Click to expand...
Click to collapse
I think that this link can help you:
http://forum.xda-developers.com/showpost.php?p=33673095&postcount=673

potatorj said:
I think that this link can help you:
http://forum.xda-developers.com/showpost.php?p=33673095&postcount=673
Click to expand...
Click to collapse
I can't get into the recovery. I get an exclamation mark.
Thanks for the reply.

cool_recep said:
I can't get into the recovery. I get an exclamation mark.
Thanks for the reply.
Click to expand...
Click to collapse
That wouldn't work as your Xoom 2 ME is not from Latin America and Motorola has different signatures for U.S., Europe and LATM...
What are you trying to do to get into recovery?
Have you tried to turn on usb debugging and using ADB to enter recovery? Just type adb reboot recovery and it should reboot into recovery, it will take a while, you should see a Green Android after about a minute, and then you can press VOL- and VOL+ to get the list of options... If that doesn't work, then it is likely that something is wrong/corrupt, I would recommend that you check if there is a SBF file for the Honey Comb distribution for your region and flash it using RSD Lite to restore everything back to stock... I know of at least two friends that had failed updtes due to corrupt files in /system (they did not pass the OTA check meaning that they are different from what is expected or they were deleted).
Also, you didn't try any of the recent hacks (safestrap/bootstrap recoveries), right? If you did, then I believe you would have to revert those hacks, or just flash the device back to factory condition using a SBF / RSD Lite, just remember to choose the right SBF file for your region, otherwise, device won't even boot.
Good luck

HinotoriBR said:
That wouldn't work as your Xoom 2 ME is not from Latin America and Motorola has different signatures for U.S., Europe and LATM...
What are you trying to do to get into recovery?
Have you tried to turn on usb debugging and using ADB to enter recovery? Just type adb reboot recovery and it should reboot into recovery, it will take a while, you should see a Green Android after about a minute, and then you can press VOL- and VOL+ to get the list of options... If that doesn't work, then it is likely that something is wrong/corrupt, I would recommend that you check if there is a SBF file for the Honey Comb distribution for your region and flash it using RSD Lite to restore everything back to stock... I know of at least two friends that had failed updtes due to corrupt files in /system (they did not pass the OTA check meaning that they are different from what is expected or they were deleted).
Also, you didn't try any of the recent hacks (safestrap/bootstrap recoveries), right? If you did, then I believe you would have to revert those hacks, or just flash the device back to factory condition using a SBF / RSD Lite, just remember to choose the right SBF file for your region, otherwise, device won't even boot.
Good luck
Click to expand...
Click to collapse
To get into recovery, I boot up the device with Vol + / - pressed. An dthen choose recovery and press vol +. The tab reboots and after about 2 minutes, I am in the middle of nowhere....reboot and the OS comes..
I have flashed SBF, that did not help either...
First I flashed the original:
1.6.0M-268.4-FLEMEM_UCATBLT1UMRTCOREEU_fastboot.xml.zip
then this one:
1.6.0M-281.8-FLEMEM_UCATBLT1UMRTCOREEU_fastboot.xml
I didn't try any hacks...
Now trying adb...
Update: That didn't work either. Same... 10 seconds of red M logo, 10 seconds black screen, 4 minutes android with exclamation mark and in the end restart into OS....
Thanks for the reply.

Please post all questions in the Q & A section. Thanks! Thread moved.
Sent from my Galaxy Nexus using Tapatalk 2

Any custom recovery solution that will help me flash OTA ZIP?
Or How can I restore the original recovery. I am stuck guys.

potatorj said:
I think that this link can help you:
http://forum.xda-developers.com/showpost.php?p=33673095&postcount=673
Click to expand...
Click to collapse
cool_recep said:
Hi guys,
I have an Bootloader unlocked MZ608 with 3.2.2.
Code:
0.268.4.MZ608.Retail.en.EU
1.6.0_268.4-MZ608
When I check for the update, I get 77.128.14.en.EU notification. I download it and say update. The system restarts and the update comes to a degree but then it fails showing up Android with exclamation mark.
I have downloaded Blur_Version.0.281.4.MZ608.Retail.en.EU and copied it to SD card. But I can not get into recovery mode to instal that too. When I try to get into recovery mode I get exclamation mark followed by a restart.
BTW, the device is MZ608 32 GB but it shows up in Motocast and device manager as MZ609.
What is the procedure that I should follow?
Thanks
Click to expand...
Click to collapse
I too was in your situation ... your device is the Xyboard mz609 to enter into recovery simultaneously press vol. on vol. down and power on, you will see a screen where you will have several choices ... with vol. down you move. with vol. on choose. if you see a triangle simultaneously press vol. up and vol. down and will go into recovery. with the device turned on you can use quick boot (from the market) to enter recovery and bootloader. when you enter bootloader you read unlocked? if it is unlocked you can have a custom recovery like me. thanks to runandhide05.

Holy! I am in recovery! Thanks man. Really appreciated!
I tried to install OTA ZIP via recovery but I got build.prop error. How to fix it?
It is something like that: (Modified some parts)
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
assert failed: file_getprop ("/system/build.prop" , "ro.build.fingerprint") == "Motorola/RTCOREEU/fleming:3.2.2/1.6.0_281.4-MZ608/1328264683:user/release-keys"
file_getprop ("/system/build.prop" , "ro.build.fingerprint") == "Motorola/RTCOREEU/fleming:4.0.4/7.7.1-128-4_MZ608-14/1344529522:use/relase-keys"
E:Error in /tmp/sideload/package.zip
(Status 7)
restoring configuration START..
restoring configuration END..
Installation aborted.

okay, let's see how I can help. I do not know English and use the google translator. I installed honeycomb for mz608 but I did not upgrade to ics. I then installed the fastboot files for honeycomb mz609 http://forum.xda-developers.com/showthread.php?t=1756100 and got the ics ota update. I also think that you can install ics for mz608 but only with fastboot files. sorry for my english.

OK. I am now downloading the honeycomb MZ609 fastboot.
Update: Flashed. The tab went into bootloop. Turned it off and went into recovery. Done wipe. Tried to flash OTA ZIP but gave signature verification error.
Update 2: Successfull reboot this time after wipe. I have noticed that baseband version says Unknown. Should I do something for that? I don't have a SIM to try.

cool_recep said:
OK. I am now downloading the honeycomb MZ609 fastboot.
Update: Flashed. The tab went into bootloop. Turned it off and went into recovery. Done wipe. Tried to flash OTA ZIP but gave signature verification error.
Update 2: Successfull reboot this time after wipe. I have noticed that baseband version says Unknown. Should I do something for that? I don't have a SIM to try.
Click to expand...
Click to collapse
I'm sorry, I forgot to tell you that you had to wipe. I also unknown baseband version and I imei-meid. I do not have microsim to try, but if you flash honeycomb mz608 imei again. I do not know why, but I prefer to have ics yet. when I find the files fastboot ics mz608 then I reflash.

I have found the version in build.prop:
1.6.0_281.4-MZ608
Flashed it with RSD. Now trying OTA again. Baseband is back BTW. Where is the IMEI writing?
Update: No luck with updating, again. Damn. Going to try recovery...
Update 2: Tried OTA Update. Got error:
assert failed: motorola.motoflash("/tmp/bp.img")

lambergio said:
I'm sorry, I forgot to tell you that you had to wipe. I also unknown baseband version and I imei-meid. I do not have microsim to try, but if you flash honeycomb mz608 imei again. I do not know why, but I prefer to have ics yet. when I find the files fastboot ics mz608 then I reflash.
Click to expand...
Click to collapse
I think I should also wait for the offical fastboot files.
BTW, my friend have the exact tab with same specs that was successfully updated via OTA. Can I backup the ICS inside it and then install that backup to my tab via custom recovery?
Also another question: Can I flash MZ609 verizon fastboot? I will replace the radio IMG from Honeycomb fastboot in order to prevent baseband brick.
To sum up:
We have two tabs in hand. One was updated to ICS via OTA and works fine as below. But the other is resisting!
Can't update via OTA.
Can't update via Recovery.
And th worst, there is no Fastboot for MZ608
Help me out guys, please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Looks like the baseband is the same with MZ616. Can I flash MZ616 ICS fastboot?

Yes, you can flash the mz616 fastboot files, should work,
If it fails, you can always reflash honeycomb fastboot ones, but i think it will work.
Make sure you erase your user data at the end of process fastboot erase userdata
Sent from my XOOM 2 sing xda app-developers app

Flashed MZ616 via fastboot, totally bricked No charge, no screen, no bootloader... Nothing
Or maybe it is stuck in boot since when I connect the USB, I get a sound but the device is not recognized.

Stuck on Lg bootscreen - no recovery

Hello everyone, I tried to flash v30a baseband over my CM nightly, but now all I can see is the LG logo..
I've tried everything, including xbsall's resurrection guide, pandaball's guide, lg update tool etc.. but i can't find a way to fix it.
Can someone help me?

this might be stupid but why not try to reflash the WKparts and recovery? with like optimusRS simple tool
oh wait that maywork for you but if you are on stock ICS just boot in to the stock recovery and follow the steps in there thne should you be fine otherwise flash the above and make a factory reset"wipe" in twrp i had the same error and the stock recovery thing fixed it for me

sioxz said:
this might be stupid but why not try to reflash the WKparts and recovery? with like optimusRS simple tool
oh wait that maywork for you but if you are on stock ICS just boot in to the stock recovery and follow the steps in there thne should you be fine otherwise flash the above and make a factory reset"wipe" in twrp i had the same error and the stock recovery thing fixed it for me
Click to expand...
Click to collapse
Stock recovery doesn't work (that what i meant with "no recovery"), could you link me that tool? I'm not sure I've tried it.

But Your Phone In Download Mode And Flash ICS 30A or 30B /C etc....Kdz
If U Dont Know How to Flash Kdz Search On Google .

OptimusRs said:
But Your Phone In Download Mode And Flash ICS 30A or 30B /C etc....Kdz
If U Dont Know How to Flash Kdz Search On Google .
Click to expand...
Click to collapse
I'll try again using this guide http://forum.xda-developers.com/showthread.php?t=2191698 and see what happens.

jakill.P920 said:
I'll try again using this guide http://forum.xda-developers.com/showthread.php?t=2191698 and see what happens.
Click to expand...
Click to collapse
Ok, i've flashed v30a using that procedure. I'm still stuck on boot. I've followed your tutorial about wkpark's bootloader and recovery, but when I try to boot in recovery it just says "please wait for seconds.. power off.." and it shuts down again..
Then I've tried installing stock recovery in the same way, but that didn't work at all.. what can I do now?

jakill.P920 said:
Ok, i've flashed v30a using that procedure. I'm still stuck on boot. I've followed your tutorial about wkpark's bootloader and recovery, but when I try to boot in recovery it just says "please wait for seconds.. power off.." and it shuts down again..
Then I've tried installing stock recovery in the same way, but that didn't work at all.. what can I do now?
Click to expand...
Click to collapse
Use This Guide To Flash The Kdz
And After Complete Flashing.... Enter The Stock Recovery and Wipe to do that power Off The Phone and Press And Hold Volume (-) than Power it On

OptimusRs said:
Use This Guide To Flash The Kdz
And After Complete Flashing.... Enter The Stock Recovery and Wipe to do that power Off The Phone and Press And Hold Volume (-) than Power it On
Click to expand...
Click to collapse
I know it may sound as a newbie question.. well, it is a noob question afterall :laugh: I'm not sure if I'm booting properly in download mode, or if my phone doesn't boot in download anymore. (I've read that it doesn't have to show me the korean S/W sentence, but how can I be sure I'm in download mode?)

jakill.P920 said:
I know it may sound as a newbie question.. well, it is a noob question afterall :laugh: I'm not sure if I'm booting properly in download mode, or if my phone doesn't boot in download anymore. (I've read that it doesn't have to show me the korean S/W sentence, but how can I be sure I'm in download mode?)
Click to expand...
Click to collapse
To Enter The Dowmload Mode :
Power Off Your Phone And Hold Volume (+) Than Connect Your Phone To The PC Or Laptop Using USB Cable it Well Show You Download Mode Logo With Korean stuff etc...
In Some Devices On GB it Well Show Black Screen Only So Open The Device Manager You Well See :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That Mean You Now In Download Mode

OptimusRs said:
To Enter The Dowmload Mode :
Power Off Your Phone And Hold Volume (+) Than Connect Your Phone To The PC Or Laptop Using USB Cable it Well Show You Download Mode Logo With Korean stuff etc...
In Some Devices On GB it Well Show Black Screen Only So Open The Device Manager You Well See :
That Mean You Now In Download Mode
Click to expand...
Click to collapse
Ok, I've done everything right, but nothing has changed.. perhaps I should try to flash a gingerbread kdz, but I wasn't able to find any of them :/

Had this issue yesterday. You will need wkpart bootloader to make it boot and flash recovery.
Follow the guide http://forum.xda-developers.com/showthread.php?p=43672348
After flashing this, recovery will work, so you can wipe data.

jakill.P920 said:
Ok, i've flashed v30a using that procedure. I'm still stuck on boot. I've followed your tutorial about wkpark's bootloader and recovery, but when I try to boot in recovery it just says "please wait for seconds.. power off.." and it shuts down again..
Then I've tried installing stock recovery in the same way, but that didn't work at all.. what can I do now?
Click to expand...
Click to collapse
DeXel55 said:
Had this issue yesterday. You will need wkpart bootloader to make it boot and flash recovery.
Follow the guide http://forum.xda-developers.com/showthread.php?p=43672348
After flashing this, recovery will work, so you can wipe data.
Click to expand...
Click to collapse
As I said before, I've already tried that one :/ when I boot in recovery using wkpark's bootloader, it just says "power of.." and then it shuts down. I've tried option three (twrp recovery) and 4(stock), I'll try to flash option one and see what happens (wkpark's bootloader+cwm recovery)

jakill.P920 said:
As I said before, I've already tried that one :/ when I boot in recovery using wkpark's bootloader, it just says "power of.." and then it shuts down. I've tried option three (twrp recovery) and 4(stock), I'll try to flash option one and see what happens (wkpark's bootloader+cwm recovery)
Click to expand...
Click to collapse
I still can't believe it, but normal cwm recovery actually worked. My phone is finally resurrected! Thank you guys for your support! Now I guess I'm going to install Optimus RS' rom, 'cause I think it's the best one around

[Guide] Huawei Y360-U61: Stock ROM / Factory Reset / OTA / TWRP / Root

Hi, in this post Im going to share with you all my tutorials for the Y360 in only one post and translated to english. You can follow this guides regardless for your Y360 variant, however, the firmware file im giving you guys here is for the U61, do not try to flash this firmware if you dont have a U61.
How to install stock rom (firmware) on the Y360-U61​What we are gonna need in this first part is the Mediatek Driver, the Sp Flash Tool and the firmware files.
Driver Mediatek Y360:
https://mega.nz/#!dzxBnDpb!c37qAbpfJ5FPB2BwCCglBentRcgBReLhT6UjULxQ3L8
Option 2:https://androidmtk.com/download-mtk-usb-all-drivers
SP Flash Tool:
https://mega.nz/#!9uI3wDxL!07YMWuwPPoJ1uYTUnSLSuFgUEruy3iS__M4GVb3-ayI
Option 2: https://spflashtool.com/
Firmware stock Y360-U61 (B116): https://mega.nz/#!4zJzFKjR!kROGPkFXtK-xp7yH7pIWia3eLbVMf7gdVSOEjWJJYVo
PLEASE READ
- Files have RAR5 compression, you'll need Winrar 5
- Password: Tecnoriales
Before you start, unrar all 3 files and instal MTK Drivers.
1. Run Sp Flash Tool as Admin, check that in Downlaod Agent says MTK_AllInOne_DA.bin, and in Scatter put the one tha is inside the firmware folder.
2. Leave everything as is and press Download, turn off your Y360-U61 and plug it to your PC using an USB cable.
3. If the drivers were properly installed, Sp Flash Tool will recognize your phone and start writing data to it automatically. This will take some minutes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. When the process is done you will see a green check and the phone will be shutdown. Now is safe to close Sp FlashTool, disconnect your phone and turn in on.
5. Since this is a first boot and Android have to build caches and stuff it might take some time and even restart itself in the process. Eventually you'll reach the setup wizard. If you end up with a bootloop, ramdom reboots, etc, perform a Factory reset from the recovery menu.
How to perform a factory reset from the recovery in the Y360​To do this you dont need a custom recovery, it can be done using the stock recovery that comes on your Y360.
1. Turn off your Y360 and press Vol+ y Power until you see the white text.
2. With Vol+ select recovery and press Vol- to enter.
3. Your y360 will reboot and enter into the recovery menu
4. Once on the recovery, use volume keys to go up and down and power to select. Go to Wipe data / Factory Reset
5. Go to Yes and press Power, the hard reset will start, it takes seconds. You can see the status in the log at the bottom of the screen.
6. Go back to the man menu of the recovery and select Reboot system Now pressing Power. Your 360 will reboot.
7. Again, this will be a long boot since Android has to build caches and stuff. Luckily your phone will be trouble free once it boots up and you complete the setup wizard.
In this video you can see how to flash the firmware and how to perform the hard reset from the recovery menu. You can also notice how was getting random reboots after flashing the firmware and i solved this performing the factory reset.
[youtube]8jy_nRtuYE8[youtube]
Update Y360 via OTA​The firmware i left is B116 which i think is the latest an has no updates.
For Information purposes:
The firmware i gave you is B104, but in the huawei servers exist the b107 patch. So the very first thing you should do after installing the firmware is updating. Specially if you plan on rooting, OTAs will break root.
Once your y360-U61 is up and running, connect to a wifi network and go to Settings to run the updater. Like i said you will find the B107 update, which is about 90MB.
After the download is complete you have to give the order to install the update, from now on the process is automatic, the phone will restart and the update will be installed.
Once it finishes, you can go to updates again to check your version, it should be B107 and it should say there's no more updates.
Install TWRP for the Huawei Y360​TWRP is a custom recovery which allows you to flash zips to modify or change your system. You need the mediatek drivers, sp flashtool and the .img file of TWRP.
Driver Mediatek Y360:
https://mega.nz/#!dzxBnDpb!c37qAbpfJ5FPB2BwCCglBentRcgBReLhT6UjULxQ3L8
SP Flash Tool:
https://mega.nz/#!9uI3wDxL!07YMWuwPPoJ1uYTUnSLSuFgUEruy3iS__M4GVb3-ayI
TWRP 2.8.7.0:
https://mega.nz/#!V2BUCJDZ!wif0gspJ2lZiYzJPzQiG73LVzWGcbamK8bWos6sdPvk
TWRP 3.1 (Newer, required by Android N roms):
https://mega.nz/#!AqQW0bBJ!xOzVZyVBjye9zgLO7G9tttL886i-7uCyMP_P7d0ZS2Q
Password: Tecnoriales
PLEASE READ
- Files have RAR5 compression, you'll need Winrar 5
Before you install, unrar all files and install mediatek drivers.
1. Run Sp Flash Tool as Admin, check that in Downlaod Agent says MTK_AllInOne_DA.bin, and in Scatter put the one tha is inside the SP FlashTool folder or the one from your stock firmware folder.
<Mod Edit> Blog link removed
2. Uncheck all boxes except recovery., double click on it to open Windows explorer and load the .img file of TWRP.
3. Press Download, turn of your phone and plug to the PC. If drivers are ok the writing will start automatically is only a couple of seconds. You will see a green check message from Sp Flash Tool when it finishes. It is safe to close it and unplug your phone.
4. To boot into recovery turn off your Y360 and press Vol+ y Power until you see the white text. Select recovery and Press Vol-
5. Your 360 will restart and boot into TWRP, since this is the first time you will see a prompt about allowing TWRP to modify your system, swipe the slider control at the bottom of the screen to accept.
Now that you have a custom recovery you can flash zip files to root, install xposed, install custom roms, etc...
Root the Huawei Y360 (SuperSu)​To do this you need to have TWRP and the zip file with SuperSu.
Root Y360 (SuperSu):
https://mega.nz/#!86xG0IYY!B6doaVtqKxXyYFQIptCQypW9A-zdaqEa6ndrAZ9Ij78
Password: Tecnoriales
Download the file and copy to your sd card before you start.
1. Boot into recovery and go to Install
2. Go to your external_SD and select the Zip file
3. Slide the control on the bottom of the screen to flash the zip file. It will take seconds.
4. When is done tap on reboot system now and wait for the phone to get ready. You might see android optimizing some apps.
5. You will have SuperSu on your launched and your phone fully rooted. This is an old version so you will get soon the Update from Google play.
In this video you can see how to install TWRP and how to root. Is in spanish

thank you !!!!!

firmware zip password is wrong

My Huawei is bricked
Hi,
my Huawei Y360-U61 dual-SIM boots but then blocks with continuous pop-ups or reboots.
I tried to update the firmware ROM via MicroSD card using many versions (full update and OTAs) from a website that provides many ROM versions, but without success. When I boot in recovery mode it says that the firmware version is Y360-U61V100R001C577B111 (I found and tried with this and successive versions without success), and I always perform a factory reset after updating and rebooting. I also tried connecting my phone to my laptop then using SP flash tools with the firmware version you provided on this thread (that should correspond to version V100R001C480B104c for the device model Y360-U23, or V100R001C443B104, or Y360-U31V100R001C05B104 both for the device model Y360-U31), I also tried in fastboot mode and ADB mode, again without success. My phone was bought in Italy about 3 years ago (2015 or so), and maybe I inadvertently rooted it, then tried to have an unblock code from Huawei consumer support but they eventually said that there is no code for my smartphone.
Before throwing away my phone, do you have any hint in this regard on how to eventually solve the problem?
Thank you
Bruno

What is a password decompressor
What is a password decompressor

IMEI is gone after factory reset. Tried flashing firmware. still network is not detected. Y360-U61

I have the same problem on my Italian phone. Any luck resolving the issue?

Hello guys, i have a problem. After flashing via SP Flash Tool nothing happened. I have done this on other chinese phones without a single problem but now i dont know what to do. I tried flashing recovery, flash with preloader or without and still nothing happens. In SP Tool everything looks fine and when i turn up phone, old system starts up

tornido067 said:
firmware zip password is wrong
Click to expand...
Click to collapse
No, is not. Is a RAR5 file you need to use Winrar 5. Sorry for the late response

RavinduSha said:
IMEI is gone after factory reset. Tried flashing firmware. still network is not detected. Y360-U61
Click to expand...
Click to collapse
Get it fixed on engeneer menu. Its super easy, just search it on google for MTK phones. Sorry for the late response

saeedshsh said:
What is a password decompressor
Click to expand...
Click to collapse
- Password: Tecnoriales - Is in OP. Sorry for the late response

brunobiondo said:
Hi,
my Huawei Y360-U61 dual-SIM boots but then blocks with continuous pop-ups or reboots.
I tried to update the firmware ROM via MicroSD card using many versions (full update and OTAs) from a website that provides many ROM versions, but without success. When I boot in recovery mode it says that the firmware version is Y360-U61V100R001C577B111 (I found and tried with this and successive versions without success), and I always perform a factory reset after updating and rebooting. I also tried connecting my phone to my laptop then using SP flash tools with the firmware version you provided on this thread (that should correspond to version V100R001C480B104c for the device model Y360-U23, or V100R001C443B104, or Y360-U31V100R001C05B104 both for the device model Y360-U31), I also tried in fastboot mode and ADB mode, again without success. My phone was bought in Italy about 3 years ago (2015 or so), and maybe I inadvertently rooted it, then tried to have an unblock code from Huawei consumer support but they eventually said that there is no code for my smartphone.
Before throwing away my phone, do you have any hint in this regard on how to eventually solve the problem?
Thank you
Bruno
Click to expand...
Click to collapse
Well that is weird maybe you just have a bad EMMC. If flashing the firmware with Sp flashtool doesnt fix the problem... i cant think on anything it will. Sorry for the late response

M0rt3s said:
Hello guys, i have a problem. After flashing via SP Flash Tool nothing happened. I have done this on other chinese phones without a single problem but now i dont know what to do. I tried flashing recovery, flash with preloader or without and still nothing happens. In SP Tool everything looks fine and when i turn up phone, old system starts up
Click to expand...
Click to collapse
same problem as well anyone know what's problem ?

mauriciognr said:
Get it fixed on engeneer menu. Its super easy, just search it on google for MTK phones. Sorry for the late response
Click to expand...
Click to collapse
Was able to get imei back. But the network is not detected.

thank you
mauriciognr said:
Hi, in this post Im going to share with you all my tutorials for the Y360 in only one post and translated to English.
Click to expand...
Click to collapse
I cant THANK YOU enough man, I am skilled in this stuff but after many attempts, i felt really lost.
your nice post and those links really helped me.
thanks again
mortem

TWRP installation
mauriciognr said:
Install TWRP for the Huawei Y360​TWRP is a custom recovery which allows you to flash zips to modify or change your system. You need the mediatek drivers, sp flashtool and the .img file of TWRP.
Click to expand...
Click to collapse
I found and tried with success a way to install TWRP without the need of a PC:
- Root your device with KingRoot (APK is available on apkpure.com);
- Install MobileUncleTool (I found version 3.0 here: https://androiddatahost.com/414a2 )
- Download a custom recovery in SD Card root (the one in the opening post)
- Start Mobileuncle Tools and open Recovery Update menu item (grant su permissions when asked)
- Select and install the just downloaded custom recovery

FRP LOCK ON SAMSUNG DEVICES [Custom Binary Blocked by FRP] [Simple Trick]

Hey People,
I had just had an Google Play Services update and Integrate into /System by "Lucky Patcher"
But when restarting phone message appears "Custom Binary Blocked by FRP"...
with this problems occurred not only in System, but occurres in "Bootloader", "Recovery" mode also..
Now, here is the trick.-
1. Download your Mobile Stock ROM by Googling it with proper Model No. and Download "Odin" by Googling it.
2. Click "Volume Down", "Power" and "Home" button for 5 seconds...
3. When Download Mode appears, Connect Usb cable into your Computer.
4. Open Odin Program on your Computer,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Select "PDA" or "AP" option available, select your Stock ROM located on computer.
6. Now click "Volume UP' button in Download Mode to Continue.
7. Now click on "Start" button to start flashing.
8. When Flashing completes, just devices be restart automatically.
9. "Volia" , your devices will be intact with no removal or loss of any data or apps......
Enjoy..
If you persists any problem, report down in this thread.......
Note:- This Trick works on my Samsung Galaxy J2 Device. But if this problem raise, then simply flash your phone again...

My device is boot looping
How can I fix it ?

Raiteihei said:
My device is boot looping
How can I fix it ?
Click to expand...
Click to collapse
Which device are you using?? Send me the details of your device...

Sorry for replying to an older thread but i'm having the same issue.
The phone I have is a Samsung Galaxy s9+ (SM-G965F/DS is writen on the box).
I've downloaded firmware from sammobile and with Frija none of which worked (tried all of the Android 10 (Q) versions from sammobile)
I'm using Odin 3.14.50 and installed Samsung usb drivers from Samsung SmartSwitch.
I'm pretty sure the country code should be BGL (Bulgaria) but i haven't found a good way to check it with what i have accessible
The phone isn't rooted and hasn't been before nor has anyone tried to root it.
The issue appeared during normal use (was scrolling FB when it started stuttering and glitching and it restarted)
Samsung logo is not visible just Custom Binary Blocked by FRP
This is the download mode if it helps but i'm in a desperate need to recover this phone.

Gettre said:
Sorry for replying to an older thread but i'm having the same issue.
The phone I have is a Samsung Galaxy s9+ (SM-G965F/DS is writen on the box).
I've downloaded firmware from sammobile and with Frija none of which worked (tried all of the Android 10 (Q) versions from sammobile)
I'm using Odin 3.14.50 and installed Samsung usb drivers from Samsung SmartSwitch.
I'm pretty sure the country code should be BGL (Bulgaria) but i haven't found a good way to check it with what i have accessible
The phone isn't rooted and hasn't been before nor has anyone tried to root it.
The issue appeared during normal use (was scrolling FB when it started stuttering and glitching and it restarted)
Samsung logo is not visible just Custom Binary Blocked by FRP
This is the download mode if it helps but i'm in a desperate need to recover this phone.
Click to expand...
Click to collapse
At first, Dowload TWRP Recovery from here,
Samsung Galaxy S9+ (Exynos)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
After that Download FRP Destroyer.zip (Flashable Zip) from Here,
https://forum.xda-developers.com/attachments/frp_destroyer_v1-1-zip.4740182/
1. Open Odin, put mobile into download mode, At PDA section, select this "twrp Recovery" given link above. Try to flash it with it.
2.After that, Boot into recovery mode by pressing power+volume Up+ bixby button together.
3. If it boots into Twrp recovery, In TWRP, go to Mount -> Click Mount USB Storage-> Usb storage will detect on your computer.
4. Copy the Flashable zip into your Internal Storage. And unmount Internal storage in TWRP.
5.Go to Install Section in TWRP, select Install zip from below. Find Your flashable zip into /sdcard, flash the zip file.
6.Then go to Reboot section in TWRP, Select System. Check if "FRP Locked" is gone or not while booting.
If problem Doesn't resolve, try to flash whole firmware for your device, download from here,
Download Galaxy S9+ SM-G965F (BGL) G965FXXSEFUA1 in Samfw - Samsung firmware download
Galaxy S9+ SM-G965F (BGL - Bulgaria) G965FXXSEFUA1 Q(Android 10) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
*Please tell me about After Flashing TWRP recovery does your mobile Boots into TWRP successfully or not.*
Try this method, hope it will helps.
If doesn't then reply me..

Ashutosh1358 said:
At first, Dowload TWRP Recovery from here,
Samsung Galaxy S9+ (Exynos)
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me
After that Download FRP Destroyer.zip (Flashable Zip) from Here,
https://forum.xda-developers.com/attachments/frp_destroyer_v1-1-zip.4740182/
1. Open Odin, put mobile into download mode, At PDA section, select this "twrp Recovery" given link above. Try to flash it with it.
2.After that, Boot into recovery mode by pressing power+volume Up+ bixby button together.
3. If it boots into Twrp recovery, In TWRP, go to Mount -> Click Mount USB Storage-> Usb storage will detect on your computer.
4. Copy the Flashable zip into your Internal Storage. And unmount Internal storage in TWRP.
5.Go to Install Section in TWRP, select Install zip from below. Find Your flashable zip into /sdcard, flash the zip file.
6.Then go to Reboot section in TWRP, Select System. Check if "FRP Locked" is gone or not while booting.
If problem Doesn't resolve, try to flash whole firmware for your device, download from here,
Download Galaxy S9+ SM-G965F (BGL) G965FXXSEFUA1 in Samfw - Samsung firmware download
Galaxy S9+ SM-G965F (BGL - Bulgaria) G965FXXSEFUA1 Q(Android 10) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
*Please tell me about After Flashing TWRP recovery does your mobile Boots into TWRP successfully or not.*
Try this method, hope it will helps.
If doesn't then reply me..
Click to expand...
Click to collapse
Just to clarify flashing TWRP will not wipe the phone right?
I'm trying to recover the data as it has the highest priority and the phone working again is just a nice to have.

Trying trying to flash TWRP i get
"Custom Binary (RECOVERY) Blocked by FRP Lock"

Gettre said:
Just to clarify flashing TWRP will not wipe the phone right?
I'm trying to recover the data as it has the highest priority and the phone working again is just a nice to have.
Click to expand...
Click to collapse
No. It will not Flash or format the whole firmware or device. and yes, i know you have to Save your data the most of the phone. But in such situations, probably the phone has to be cleaned formatted to remove FRP completely.

Gettre said:
Trying trying to flash TWRP i get
"Custom Binary (RECOVERY) Blocked by FRP Lock"
Click to expand...
Click to collapse
here's i have a link over here, just try it.
Remove FRP Lock on Samsung with Combination File (Odin)
Here are some easy tricks to easily remove FRP lock on Samsung Galaxy devices by flashing Samsung combination file (firmware) using Odin.
technastic.com
But i think it can format your whole device. Because we have to mostly unlock the recovery partition from FRP. If recovery Partition has unlocked by FRP, There's 80-100% chances that you can save all your further data on phone if TWRP Recovery get booted on your phone.
Just have a try to given link, because we have just to "Bypass FRP" from the device in order to boot into recovery Partition.
If any problem persists, Please reply me with given screenshots.

Gettre said:
Trying trying to flash TWRP i get
"Custom Binary (RECOVERY) Blocked by FRP Lock"
Click to expand...
Click to collapse
I am giving this link to learning more from it. Mostly we have to bypass FRP for only one time.
Samsung FRP Bypass S9 Plus G965F, G965U, G965W - Pangu.in
After many requests, I am going to show you how to unlock or bypass Samsung Galaxy S9 and S9 plus FRP lock or Google account in android Oreo 8.0 and
pangu.in
Just when you try to flash your phone via odin, at flash completes, just try to boot into recovery mode, not let goto system start of your device.

Gettre said:
Sorry for replying to an older thread but i'm having the same issue.
The phone I have is a Samsung Galaxy s9+ (SM-G965F/DS is writen on the box).
I've downloaded firmware from sammobile and with Frija none of which worked (tried all of the Android 10 (Q) versions from sammobile)
I'm using Odin 3.14.50 and installed Samsung usb drivers from Samsung SmartSwitch.
I'm pretty sure the country code should be BGL (Bulgaria) but i haven't found a good way to check it with what i have accessible
The phone isn't rooted and hasn't been before nor has anyone tried to root it.
The issue appeared during normal use (was scrolling FB when it started stuttering and glitching and it restarted)
Samsung logo is not visible just Custom Binary Blocked by FRP
This is the download mode if it helps but i'm in a desperate need to recover this phone.
Click to expand...
Click to collapse
Stock ROMs aren't "custom", so they shouldn't be blocked. But before you try flashing from Odin, it might be a good idea to try restoring your corrupted system by performing a "factory reset" from the standard recovery. This won't wipe any pictures, videos, music or downloads, but will delete any apps you may have installed, along with their data. You WILL need your Google Account login and password when you first reboot after the reset. If that doesn't work, it may be a hardware malfunction and not firmware.

lewmur said:
Stock ROMs aren't "custom", so they shouldn't be blocked. But before you try flashing from Odin, it might be a good idea to try restoring your corrupted system by performing a "factory reset" from the standard recovery. This won't wipe any pictures, videos, music or downloads, but will delete any apps you may have installed, along with their data. You WILL need your Google Account login and password when you first reboot after the reset. If that doesn't work, it may be a hardware malfunction and not software.
Click to expand...
Click to collapse
The thing is i cannot enter recovery.
The only menu i can enter is Download menu.
I'm guessing the FW is toast

Gettre said:
The thing is i cannot enter recovery.
The only menu i can enter is Download menu.
I'm guessing the FW is toast
Click to expand...
Click to collapse
Yeah, it sounds like it is time to call 1-800-samsung.

Ashutosh1358 said:
I am giving this link to learning more from it. Mostly we have to bypass FRP for only one time.
Samsung FRP Bypass S9 Plus G965F, G965U, G965W - Pangu.in
After many requests, I am going to show you how to unlock or bypass Samsung Galaxy S9 and S9 plus FRP lock or Google account in android Oreo 8.0 and
pangu.in
Just when you try to flash your phone via odin, at flash completes, just try to boot into recovery mode, not let goto system start of your device.
Click to expand...
Click to collapse
I've flashed the phone with the software from sammobile but with the latest update (01.2022) and older in the same revision.
I can't get into recovery even with the software from frija.
The instructions require access to recovery but I wasn't able to get into it.
Twrp is still failing even with different versions
Should I try a phone repair shop? I just don't trust they will keep the data.
Edit: sorry this was for the other reply i will try this now
I've just checked the guide and it seems it will delete all the data.
Also i'm unable to find a file with my country code

Gettre said:
I've flashed the phone with the software from sammobile but with the latest update (01.2022) and older in the same revision.
I can't get into recovery even with the software from frija.
The instructions require access to recovery but I wasn't able to get into it.
Twrp is still failing even with different versions
Should I try a phone repair shop? I just don't trust they will keep the data.
Edit: sorry this was for the other reply i will try this now
I've just checked the guide and it seems it will delete all the data.
Also i'm unable to find a file with my country code
Click to expand...
Click to collapse
Okay. Just tell me Your Country and let me search a firmware for you..
Mostly in such cases, it's been hard bricked, that's why it can't going into recovery mode also.
I will find a firmware that's matches your device. Flash all of firmware on device. But it will remove your whole data. But your device be in working condition too.
If this doesn't resolve, kind go to samsung repair shop to troubleshoot it.

I'm using a Samsung s6 edge plus (sm-g928f) UK (XEU)

badmankilla said:
I'm using a Samsung s6 edge plus (sm-g928f) UK (XEU)
Click to expand...
Click to collapse
Sir, tell me your problem related to thread or related to other device issues ???
And you can send me sone screenshot of your problem if available??

hello @Ashutosh1358 can you help me find the combination firmware for my sm-g532G/ds

Hello guys just need combination file
J260f binary U9
Or remove Frp lock the phone only boot to download mode not Samsung logo no recovery
And thanks in advance

Ashutosh1358 said:
Sir, tell me your problem related to thread or related to other device issues ???
And you can send me sone screenshot of your problem if available??
Click to expand...
Click to collapse
Hi There I have the same problem where I cannot flash toany ROM and it just shows FRP Binary lock , please advise .

Stuck on Samsung Logo

Hi there,
I tried to install a updated version of android on the 10.1, installed TWRP, managed to run it through quick boot (couldn't make it work through pressing power and volume down), wiped everything as indicated, tried to install lineage 19 and then error 255. Since then when I start the device either I start in the normal recovery with the download option (not sure if I can do something through Odin there) or normal start-up and I am stuck on the devide's name.
Any idea if I can recover something from here?
Many thanks!

Flash stock rom via Odin should revert .

JJEgan said:
Flash stock rom via Odin should revert .
Click to expand...
Click to collapse
Great thanks I managed to re-install to stock through ODIN. Now will try not to mess up again trying to install the custom ROM