This is out of control - Moto G7 Power Questions & Answers

can someone explain to me why all the recovery options i try in the flash process of custom rom installation lose touch capability at some point in those steps after rebooting?
i have tried all releases of twrp older and newer for ocean.. i have tried orange fox.. they all work until about halfway through the flash process when a reboot to recovery is needed.. the recovery comes up just fine and then loses touch functionality and i cant recover it unless i flash back to stock and start all over again..
the phone is x1955-5 and is brand new and was just taken out of the box. theres nothing wrong with the handset and theres no way i can be the only one having this problem. this has got to be related to this bull**** a/b partition scheme.
god what a stupid idea to create this trash.

xd1801 said:
can someone explain to me why all the recovery options i try in the flash process of custom rom installation lose touch capability at some point in those steps after rebooting?
i have tried all releases of twrp older and newer for ocean.. i have tried orange fox.. they all work until about halfway through the flash process when a reboot to recovery is needed.. the recovery comes up just fine and then loses touch functionality and i cant recover it unless i flash back to stock and start all over again..
the phone is x1955-5 and is brand new and was just taken out of the box. theres nothing wrong with the handset and theres no way i can be the only one having this problem. this has got to be related to this bull**** a/b partition scheme.
god what a stupid idea to create this trash.
Click to expand...
Click to collapse
We're u getting ur twrp there one in tellagram group that works fine the driver is not sticking .What I did was boot it from fastboot and instead of rebooting back into recovery during flashing boot back into fastboot then fastboot boot into recovery and use this kernel flash after I flash rom with out rebooting

roadkill42 said:
We're u getting ur twrp there one in tellagram group that works fine the driver is not sticking .What I did was boot it from fastboot and instead of rebooting back into recovery during flashing boot back into fastboot then fastboot boot into recovery and use this kernel flash after I flash rom with out rebooting
Click to expand...
Click to collapse
Flash using this method after u flash the kernel that will fix the touch issue in recovery rember each rom has an recovery in it so after u flash rom make sure u flash back the the recovery of choice I use ofox personal

roadkill42 said:
We're u getting ur twrp there one in tellagram group that works fine the driver is not sticking .What I did was boot it from fastboot and instead of rebooting back into recovery during flashing boot back into fastboot then fastboot boot into recovery and use this kernel flash after I flash rom with out rebooting
Click to expand...
Click to collapse
What is this telegram group you're talking about? Can you please link it?

ultracoolguy said:
What is this telegram group you're talking about? Can you please link it?
Click to expand...
Click to collapse
Moto g 7 power supply I'm trying to find link
---------- Post added at 05:26 PM ---------- Previous post was at 05:24 PM ----------
roadkill42 said:
Moto g 7 power supply I'm trying to find link
Click to expand...
Click to collapse
Hey, I'm using Telegram to chat. Join me! Download it here: https://telegram.org/dl try this link then look for Moto g7 power support group between this forum and tellagram u will not have problems

roadkill42 said:
Moto g 7 power supply I'm trying to find link
---------- Post added at 05:26 PM ---------- Previous post was at 05:24 PM ----------
Hey, I'm using Telegram to chat. Join me! Download it here: https://telegram.org/dl try this link then look for Moto g7 power support group between this forum and tellagram u will not have problems
Click to expand...
Click to collapse
I'm sorry, I already have Telegram but I can't find the link.
EDIT: Found it https://t.me/mG7Power

roadkill42 said:
Flash using this method after u flash the kernel that will fix the touch issue in recovery rember each rom has an recovery in it so after u flash rom make sure u flash back the the recovery of choice I use ofox personal
Click to expand...
Click to collapse
All steps in the guide you shared were followed exactly as printed.. After step 6 and before step 8, when booting back into twrp, i lost touch functionality and could not proceed forward (unless i sideload)..
which I havent tried again because even sideloading in the past doesn't give me success in installing the rom.. next comes to the bootloops.. tried the following recoveries..
twrp-3.3.1-1-ocean.img
twrp-3.3.1-2-ocean.img
twrp-3.4.0-0-ocean.img
OrangeFox-R1.2-Stable-ocean (3) .img

roadkill42 said:
We're u getting ur twrp there one in tellagram group that works fine the driver is not sticking .What I did was boot it from fastboot and instead of rebooting back into recovery during flashing boot back into fastboot then fastboot boot into recovery and use this kernel flash after I flash rom with out rebooting
Click to expand...
Click to collapse
I cant even get to that point because the loss of touch function occurs earlier in the process than rom installation as printed in most guides..

xd1801 said:
I cant even get to that point because the loss of touch function occurs earlier in the process than rom installation as printed in most guides..
Click to expand...
Click to collapse
Then boot into the recovery from adb comands put the recovery img in ur adb folder then put phone in fastboot mode then fastboot devices to make sure phone is seen then type fastboot boot (the name of the recovery u chose) then hit enter bottom then ur phone will be in the choice of recovery u booted into . now some roms come with there own recovery's so after u flashed rom then don't reboot jus go back and flash a recovery now make sure u follow the flashing guid I sent after phone has butted up shut down put phone in fastboot mode then boot in to recovery using phone keys if it freezes or no touch u can go at it two ways . 1st is if no touch is manuly restart phone in fastboot then phone keys into recovery might take 3 times or more then works .2 boot into fastboot boot into ur recovery to finish flashing . This recovery zip I'm sending is ofox recovery flash it while ur in booted recovery then ur touch should work if any problems go to the tellagram group motog7 power support group

Related

help

can someone who have and mt7 tl10 do a twrp backup and send me it i fked up my phone every single rom i install it just keeps boot looping
papoose515 said:
can someone who have and mt7 tl10 do a twrp backup and send me it i fked up my phone every single rom i install it just keeps boot looping
Click to expand...
Click to collapse
If you're installing stock rom you must have stock recovery. If you're installing newer version of current rom do a wipe data, wipe dalvik and wipe cache.
Sent from my HUAWEI MT7-L09 using Tapatalk
i forgot to say it won't boot into stock recovery only boots to cwm or twrp it only boots in stock when i have usb when it does that it goes to 90 then fail tried fastboot flashing cust/boot/system
Similar Problem
i have as MT7-L09 that will not even boot into a recovery or fastboot or get past the boot logo and does not connect via ADB any help ?
Foxtv69 said:
i have as MT7-L09 that will not even boot into a recovery or fastboot or get past the boot logo and does not connect via ADB any help ?
Click to expand...
Click to collapse
with the phone off plug in the usb and hold the vol down and power button
papoose515 said:
with the phone off plug in the usb and hold the vol down and power button
Click to expand...
Click to collapse
i now have the phone in fastboot mode but the PC still will not connect even though i have done fresh installs of the ADB and phone drivers so i can not execute any of the ADB commands to flash stock recovery or stock ROM back to the phone any help from here ?
Foxtv69 said:
i now have the phone in fastboot mode but the PC still will not connect even though i have done fresh installs of the ADB and phone drivers so i can not execute any of the ADB commands to flash stock recovery or stock ROM back to the phone any help from here ?
Click to expand...
Click to collapse
plug it out then back in then fastboot flash cust/recovery
papoose515 said:
plug it out then back in then fastboot flash cust/recovery
Click to expand...
Click to collapse
i did that unplugged then plugged back in i tried to flash recovery flie and i get this prntscr. com/8qy4o1 (new member so cant post link) and then when i try and do cust its saying the file does not exist even though im lunching CMD within the folder from which all the files are located prntscr. com/8qy60q (new member so cant post link)
Sorry but this is the first big problem ive run into with a android device after the 3 others ive had experience with all the help is appreciated
Foxtv69 said:
i did that unplugged then plugged back in i tried to flash recovery flie and i get this prntscr. com/8qy4o1 (new member so cant post link) and then when i try and do cust its saying the file does not exist even though im lunching CMD within the folder from which all the files are located prntscr. com/8qy60q (new member so cant post link)
Sorry but this is the first big problem ive run into with a android device after the 3 others ive had experience with all the help is appreciated
Click to expand...
Click to collapse
does cust have numbers before it?
papoose515 said:
does cust have numbers before it?
Click to expand...
Click to collapse
this is what i get with cust i may be doing this part wrong with cust i haven't come across this method before prntscr. com/8qyesu
Foxtv69 said:
this is what i get with cust i may be doing this part wrong with cust i haven't come across this method before prntscr. com/8qyesu
Click to expand...
Click to collapse
can't view that link
papoose515 said:
can't view that link
Click to expand...
Click to collapse
prntscr .com/8qyt3k just take the space out of the link so its not a broken link
NVM..... Delete.
Does Anyone Know any further things i could try ? as the phone still functions i just cant get it out of fastboot mode or to connect to my PC so i dont want to throw it away as a lost cause just yet

How to Flash Custom Recovery ?

can some one tell me how to root and how to Flash Custom Recovery ? STep by Step would be great.
I'm also looking for a step by step guide.
ps2lover said:
can some one tell me how to root and how to Flash Custom Recovery ? STep by Step would be great.
Click to expand...
Click to collapse
ohmigother said:
I'm also looking for a step by step guide.
Click to expand...
Click to collapse
For step by step, you guys can check this site.
beritahuaja.blogspot.my/2015/10/how-to-root-xiaomi-mi4c.html?en
For latest TWRP recovery, check here to choose the correct recovery and download
en.miui.com/thread-169401-1-1.html
Note: after download, replace your latest TWRP .img to overwrite the recovery.img
Flashed TWRP 2.8.7.0 and then flashed super su 2.46. Successfully rooted. Works like a charm.
Sent using xda premium
I keep failing to installl the recovery.
I do all the fastboot stuff then boot to recovery and it's always mi recovery not twrp
https://imgur.com/S2hsDgC
what now?
w1ll1m said:
I keep failing to installl the recovery.
I do all the fastboot stuff then boot to recovery and it's always mi recovery not twrp
https://imgur.com/S2hsDgC
what now?
Click to expand...
Click to collapse
Try another way here, for entering twrp.
After you flashed the recovery successfully. Do not type the command of "fastboot reboot".
On your phone, press and hold the POWER and UP VOLUME buttons together until you enter the TWRP recovery. (It will power off and boot up recovery)
Note: Do not let it boot to normal system startup. This this case, you need to reflash the recovery via fastboot and follow the steps above again.
After you have root the phone successfully, you can enter the TWRP recovery without flashing via fastboot already.
Hope above help you.
keatbo said:
Try another way here, for entering twrp.
After you flashed the recovery successfully. Do not type the command of "fastboot reboot".
On your phone, press and hold the POWER and UP VOLUME buttons together until you enter the TWRP recovery. (It will power off and boot up recovery)
Note: Do not let it boot to normal system startup. This this case, you need to reflash the recovery via fastboot and follow the steps above again.
After you have root the phone successfully, you can enter the TWRP recovery without flashing via fastboot already.
Hope above help you.
Click to expand...
Click to collapse
Thanks, I will gice it a try.
Need to charge laptop battery first
Edit
What you said works, however there is a problem.
The touchscreen doesn't recognise any touches.
Edit
It's working now. That was weird
w1ll1m said:
Thanks, I will gice it a try.
Need to charge laptop battery first
Edit
What you said works, however there is a problem.
The touchscreen doesn't recognise any touches.
Edit
It's working now. That was weird
Click to expand...
Click to collapse
If the touches screen doesn't work, It might be the TWRP recovery issue. You can try flash other version to solve the problem.
Anyway, great to know everything works for you now.
I've this issue.
TWRP is installed but:
- if I boot via [power]+[vol+] I enter in old stock recovery
- if I boot via fastboot using command "fastboot boot recovery.img", TWRP is loaded correctly
You said:
keatbo said:
Try another way here, for entering twrp.
After you flashed the recovery successfully. Do not type the command of "fastboot reboot".
Click to expand...
Click to collapse
Ok this point
keatbo said:
On your phone, press and hold the POWER and UP VOLUME buttons together until you enter the TWRP recovery. (It will power off and boot up recovery)
Click to expand...
Click to collapse
--> you mean I have to do this while phone is still in fastboot mode?
---------- Post added at 10:15 AM ---------- Previous post was at 10:03 AM ----------
keatbo said:
If the touches screen doesn't work, It might be the TWRP recovery issue. You can try flash other version to solve the problem.
Click to expand...
Click to collapse
on my mi4c, when I boot TWRP 2.8.7.1, touchscreen NEVER works at first time.
But if I wait 2-3 minutes, leaving phone running TWRP, after this touchscreen start working
_PeTiT_ said:
--> you mean I have to do this while phone is still in fastboot mode?
Click to expand...
Click to collapse
Yes do it while in fastboot mode.
on my mi4c, when I boot TWRP 2.8.7.1, touchscreen NEVER works at first time.
But if I wait 2-3 minutes, leaving phone running TWRP, after this touchscreen start working
Click to expand...
Click to collapse
Yes very first time after I flashed and entered the TWRP recovery successfully, I need to wait for few minutes and the touchscreen only start working.
Then I have flashed a few other versions of TWRP, I have forgotten which one I have flashed already, my TWRP recovery works immediately without any touchscreen issue.
Is twrp available from flashify?
https://play.google.com/store/apps/details?id=com.cgollner.flashify
I just created a guide here: http://forum.xda-developers.com/mi-4c/development/flash-twrp-using-flashify-app-pc-dev-rom-t3230355

Guide To Unbrick RealMe 1[CPH1859/1861/1706]-[A.29]

Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29​
Files You Need To Download:
1:Miracle Box Tool-https://mega.nz/#!lVsQGSaC!6TTJopMyntMQA0IKYdC_5BlsxIjV_Ibhx2qWL_ZqDyI
2:Stock Rom- https://mega.nz/#F!ncMFUaaa!0fVNwJ_Io0EMFv8YLjBZlQ [Select Download As Zip]
3:https://androidmtk.com/install-android-cdc-driver-manually [Install Drivers Using This Guide]​
Click to expand...
Click to collapse
Steps To Flash Stock Rom:
1:Install Miracle Box And Drivers
2:Launch Miracle Box
3: Open Mtk Tab
4:Click on Services
5:Select Write From The Available Options
6:Select 8th Boot From Boot Options
7:In Second Options,Select Oppo Realme 1
8:Check Skip Preloader File
9:Hit Start
10:Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
11:Remove Cable And Press Power+VOLUME Up For 15 Seconds
You Have Unbricked Your Device​
Click to expand...
Click to collapse
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
1st link miracle box is not working plz correct it bro
can you share download links from other providers? mega asks for premium account.
thank you.
Didn't work for me
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29​
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
After flashing twrp recovery when I booted my device, a software update popped up and it automatically updated over night and my device hard bricked. I tried everything but couldn't fix it. My pc is not even recognising my phone so can't follow your steps. Any suggestion or help to fix my device will be appreciated.
same mine bro,
rom version was a31 and after installed twrp, my device hard bricked. i couldnt solve yet, waiting a newer version of miracle box or etc.
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29​
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
i dumped the stock rom bro @besttipsYT Not Shobith
this method is not working at this time...when i trying to flash by this method only show.......phone connected......downloding boot8....then disconnect my phone ..&reboot
Please don't flash custom recovery (here twrp) without proper knowledge or just sake of modding device. The builds and methods are not always working and may end up bricking your device.
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Alen012 said:
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Click to expand...
Click to collapse
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
StripsOfTatti said:
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Click to expand...
Click to collapse
Which recovery are you in? Is it Stock or Custom?
If u have stock first wipe data and then flash boot.img or ozip file (stock ROM).
If u have custom recovery then you need to flash stock recovery + stock ROM.
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Simba Gaara said:
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Click to expand...
Click to collapse
If recovery and fastboot are inaccessible means you need to visit service center.
When trying to connect realme 1 to miracle it showing usb device not connected, how to solve this? Drivers are installed
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
AwesomeVk47 said:
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
Click to expand...
Click to collapse
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Naveen56 said:
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Click to expand...
Click to collapse
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
AwesomeVk47 said:
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
Click to expand...
Click to collapse
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Code:
fastboot oem reboot-recovery
Install ozip.
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Is that link for realme 1 stock recovery?.......it would be great help if you could tell me how to obtain it....just for future use
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Will this link work for stock rom file?
Link1
https://www.realme.com/in/support/software-update
Link2
https://www.getdroidtips.com/oppo-realme-1-stock-firmware-collections/
Which one of these should I use?

Can't install any twrp on Redmi Note 7 pro

I've been trying to set up twrp all day, but after almost every attempt, I gave up. If i put official and last twrp, the phone goes to bootloop and has to be flashed through MiFlash global ROM, after some custom twrp or Peter's twrp, nothing happens, if i try to enter recovery mode after some old twrp's, the phone automatically goes to bootloop.
What am I doing wrong, friends? Plz help.
Unlocked? I know stupid question but...
Fastboot, flash recovery, don't reboot and but ur finger on vol+ and power button?
What for steps u made and adb plus driver? Maybe some can help u.
joke19 said:
Unlocked? I know stupid question but...
Fastboot, flash recovery, don't reboot and but ur finger on vol+ and power button?
What for steps u made and adb plus driver? Maybe some can help u.
Click to expand...
Click to collapse
Yeah, ofc it was unlocked))) and I tried manually reboot device, but no effect.
For steps, I tried installed various fastboot files and many Many different twrp. But ADB plus, what's is that?
Thank you anyway
Do this and report back
1.Flash miui through mi flash
2.DONT BOOT INTO SYSTEM
3.Flash peters twrp through fastboot
4.Boot into recovery by using hardware keys....DONT USE fastboot reboot recovery command
5.Boot into system
24likan said:
Do this and report back
1.Flash miui through mi flash
2.DONT BOOT INTO SYSTEM
3.Flash peters twrp through fastboot
4.Boot into recovery by using hardware keys....DONT USE fastboot reboot recovery command
5.Boot into system
Click to expand...
Click to collapse
Yeah, but how i can flash twrp and then noot into recovery, if device after installing do autostart into system?
When starts booting into system.... Use hardware keys to boot into fastboot instead of booting into system... Do this very carefully
24likan said:
When starts booting into system.... Use hardware keys to boot into fastboot instead of booting into system... Do this very carefully
Click to expand...
Click to collapse
You mean use keys for booting into recovery, not to fastboot?
lastpixel said:
You mean use keys for booting into recovery, not to fastboot?
Click to expand...
Click to collapse
Bro don't confuse yourself.... Your aim is to not boot into system unless u fls recovery via fastboot... Read what i have posted and try it
24likan said:
Bro don't confuse yourself.... Your aim is to not boot into system unless u fls recovery via fastboot... Read what i have posted and try it
Click to expand...
Click to collapse
So, i did like yoy wrote in instruction, when was first reboot, i pressed button to enter into fastboot, then flashed twrp, then again restarted for finishing process of instalation. When all is completed, tried entereing into recovery, there's not twrp, just factory recovery was.
So doesn't work this one.
lastpixel said:
So, i did like yoy wrote in instruction, when was first reboot, i pressed button to enter into fastboot, then flashed twrp, then again restarted for finishing process of instalation. When all is completed, tried entereing into recovery, there's not twrp, just factory recovery was.
So doesn't work this one.
Click to expand...
Click to collapse
No first reboot. After flashing push direct the button for the recovery menu.
Or
fastboot boot recovery.img
Then flash the recovery.zip with the booted not flashed recovery.img
You are doing it wrong mate.... Anyways can you post the output of this command "fastboot oem device-info"... Read understand and do again.... Don't reboot or boot until u flash recovery.... Can't repeat everytime bro... You have to use your brain
joke19 said:
No first reboot. After flashing push direct the button for the recovery menu.
Or
fastboot boot recovery.img
Then flash the recovery.zip with the booted not flashed recovery.img
Click to expand...
Click to collapse
After flashing what? Rom? I don't get you man. After flashing Rom with Miflash, when device do restart, i need flashing twrp or enter to recovery, but for what need go to recovery if it still not there. Sorry for my noobs questions
https://aubykhan.wordpress.com/2013...t-into-twrp-or-cwm-recovery-without-flashing/
U flash ur recovery.img in fastboot, right.
Then don't reboot ur phone. Hold in fastboot the volume+ and power still to reboot and maybe ur phone go in ur twrp recovery
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
lastpixel said:
After flashing what? Rom? I don't get you man. After flashing Rom with Miflash, when device do restart, i need flashing twrp or enter to recovery, but for what need go to recovery if it still not there. Sorry for my noobs questions
Click to expand...
Click to collapse
Not a rom ur recovery.img zip for flashing in custom recovery
24likan said:
You are doing it wrong mate.... Anyways can you post the output of this command "fastboot oem device-info"... Read understand and do again.... Don't reboot or boot until u flash recovery.... Can't repeat everytime bro... You have to use your brain
Click to expand...
Click to collapse
Code:
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: true
(bootloader) Charger screen enabled: false
OKAY [ 0.009s]
Finished. Total time: 0.014s
I can't get this "Don't reboot until flash recovery", but how, if device do this automatically, i tried holding power + vol-, got into fastboot, then flashed ur twrp, and then again reboot to system.
joke19 said:
https://aubykhan.wordpress.com/2013...t-into-twrp-or-cwm-recovery-without-flashing/
U flash ur recovery.img in fastboot, right.
Then don't reboot ur phone. Hold in fastboot the volume+ and power still to reboot and maybe ur phone go in ur twrp recovery
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
Not a rom ur recovery.img zip for flashing in custom recovery
Click to expand...
Click to collapse
As i said before, i did it many times. There's happen or bootloop, come this logo funny bunny, or sometime it load to factory recovery.
I suppose, maybe something bad with adb drivers? Coz i didn't update it since i have RN5... But in console seems everything is ok, the device is connected and see.
U test the boot method?
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
lastpixel said:
As i said before, i did it many times. There's happen or bootloop, come this logo funny bunny, or sometime it load to factory recovery.
I suppose, maybe something bad with adb drivers? Coz i didn't update it since i have RN5... But in console seems everything is ok, the device is connected and see.
Click to expand...
Click to collapse
Right recovery lavender is note 7 and the pro violet
joke19 said:
U test the boot method?
Click to expand...
Click to collapse
Yeah, tried also this
Code:
C:\adb>fastboot boot twrp.img
Sending 'boot.img' (65536 KB) OKAY [ 1.403s]
Booting OKAY [ 0.133s]
Finished. Total time: 1.618s
device is rebooted and now stucked on logo Redmi
joke19 said:
U test the boot method?
---------- Post added at 10:11 AM ---------- Previous post was at 10:07 AM ----------
Right recovery lavender is note 7 and the pro violet
Click to expand...
Click to collapse
I did with twrp from man who give link. Do you have right version?
https://files.orangefox.website/OrangeFox-Stable/
Lavender global and pro violet
---------- Post added at 10:51 AM ---------- Previous post was at 10:21 AM ----------
lastpixel said:
I did with twrp from man who give link. Do you have right version?
Click to expand...
Click to collapse
Now u're quite :laugh:
---------- Post added at 11:33 AM ---------- Previous post was at 10:51 AM ----------
And again not one time
I don't really understand asking you not to rebooting the device until I flash twrp. My steps: If I'm flashing through MiFlash, then the device automatically reboots, I tried to enter fastboot mode at the moment of reboot, and yeah I entered and flashed recovery(at least seems like that), but then when the device rebooted manually , again I see that there is not a custom recovery, maybe I missed something and your devices do not do automatic reboot during the flashing, or your instructions are wrong. Sorry man.

[Resolved] Phone boots to fastboot Instead of recovery

Hey guys,
I wanted to flash a custom ROM on my Mi 9 SE, for this I installed TWRP (3.3.1-3) and Booted into it normaly. After wiping the phone I mistakenly restarted it and now the phone instaltly goes into fastboot mode without a chance to enter TWRP. I tryed to reflash TWRP but it did not work. I can't use adb as the phone only enters fastboot mode. is there another way to enter recovery mode? I also found the software MiFlash from Xiaomi but I only get the error "can not found file flash_all.bat"
Edit: Got it to work now, this is what I did:
Download MiFlash (from here: c[DOT]mi[DOT]com/thread-1329226-1-1.html [can't use links as new user ¯\_(ツ)_/¯])
flash stock ROM (from here: xiaomistockrom[DOT]com/xiaomi-mi-9-se [same])
it did not work with the stock ROM found on Xiaomis Website but only with the one linked.
Thookie said:
Hey guys,
I wanted to flash a custom ROM on my Mi 9 SE, for this I installed TWRP (3.3.1-3) and Booted into it normaly. After wiping the phone I mistakenly restarted it and now the phone instaltly goes into fastboot mode without a chance to enter TWRP. I tryed to reflash TWRP but it did not work. I can't use adb as the phone only enters fastboot mode. is there another way to enter recovery mode? I also found the software MiFlash from Xiaomi but I only get the error "can not found file flash_all.bat"
Click to expand...
Click to collapse
Did you try booting into recovery using hardware button combo? That might help, I guess.
Sachin said:
Did you try booting into recovery using hardware button combo? That might help, I guess.
Click to expand...
Click to collapse
Yes i did and it did not work, i now got it tho and will update my post with the resolution shortly.
Thookie said:
Yes i did and it did not work, i now got it tho and will update my post with the resolution shortly.
Click to expand...
Click to collapse
OK cool!

Categories

Resources