can someone who have and mt7 tl10 do a twrp backup and send me it i fked up my phone every single rom i install it just keeps boot looping
papoose515 said:
can someone who have and mt7 tl10 do a twrp backup and send me it i fked up my phone every single rom i install it just keeps boot looping
Click to expand...
Click to collapse
If you're installing stock rom you must have stock recovery. If you're installing newer version of current rom do a wipe data, wipe dalvik and wipe cache.
Sent from my HUAWEI MT7-L09 using Tapatalk
i forgot to say it won't boot into stock recovery only boots to cwm or twrp it only boots in stock when i have usb when it does that it goes to 90 then fail tried fastboot flashing cust/boot/system
Similar Problem
i have as MT7-L09 that will not even boot into a recovery or fastboot or get past the boot logo and does not connect via ADB any help ?
Foxtv69 said:
i have as MT7-L09 that will not even boot into a recovery or fastboot or get past the boot logo and does not connect via ADB any help ?
Click to expand...
Click to collapse
with the phone off plug in the usb and hold the vol down and power button
papoose515 said:
with the phone off plug in the usb and hold the vol down and power button
Click to expand...
Click to collapse
i now have the phone in fastboot mode but the PC still will not connect even though i have done fresh installs of the ADB and phone drivers so i can not execute any of the ADB commands to flash stock recovery or stock ROM back to the phone any help from here ?
Foxtv69 said:
i now have the phone in fastboot mode but the PC still will not connect even though i have done fresh installs of the ADB and phone drivers so i can not execute any of the ADB commands to flash stock recovery or stock ROM back to the phone any help from here ?
Click to expand...
Click to collapse
plug it out then back in then fastboot flash cust/recovery
papoose515 said:
plug it out then back in then fastboot flash cust/recovery
Click to expand...
Click to collapse
i did that unplugged then plugged back in i tried to flash recovery flie and i get this prntscr. com/8qy4o1 (new member so cant post link) and then when i try and do cust its saying the file does not exist even though im lunching CMD within the folder from which all the files are located prntscr. com/8qy60q (new member so cant post link)
Sorry but this is the first big problem ive run into with a android device after the 3 others ive had experience with all the help is appreciated
Foxtv69 said:
i did that unplugged then plugged back in i tried to flash recovery flie and i get this prntscr. com/8qy4o1 (new member so cant post link) and then when i try and do cust its saying the file does not exist even though im lunching CMD within the folder from which all the files are located prntscr. com/8qy60q (new member so cant post link)
Sorry but this is the first big problem ive run into with a android device after the 3 others ive had experience with all the help is appreciated
Click to expand...
Click to collapse
does cust have numbers before it?
papoose515 said:
does cust have numbers before it?
Click to expand...
Click to collapse
this is what i get with cust i may be doing this part wrong with cust i haven't come across this method before prntscr. com/8qyesu
Foxtv69 said:
this is what i get with cust i may be doing this part wrong with cust i haven't come across this method before prntscr. com/8qyesu
Click to expand...
Click to collapse
can't view that link
papoose515 said:
can't view that link
Click to expand...
Click to collapse
prntscr .com/8qyt3k just take the space out of the link so its not a broken link
NVM..... Delete.
Does Anyone Know any further things i could try ? as the phone still functions i just cant get it out of fastboot mode or to connect to my PC so i dont want to throw it away as a lost cause just yet
Related
Dear, xda members
I have a problem because my Nexus S i9023 is bricked.
I flashed a bad ROM, I use it Clickie.
Now you think, but is not that stupid?
yes it is! Now my question, how can i fix this?
The Nexus S does not boot anymore, not even recovery, the screen just stays black
Still have questions? just ask.
greetz
bart
bartjuhhbartyow said:
Dear, xda members
I have a problem because my Nexus S i9023 is bricked.
I flashed a bad ROM, I use it Clickie.
Now you think, but is not that stupid?
yes it is! Now my question, how can i fix this?
The Nexus S does not boot anymore, not even recovery, the screen just stays black
Still have questions? just ask.
greetz
bart
Click to expand...
Click to collapse
Will your phone boot into bootloader mode? Take the battery out and put it back in and hold power and volume up at the same time..
bartjuhhbartyow said:
Dear, xda members
I have a problem because my Nexus S i9023 is bricked.
I flashed a bad ROM, I use it Clickie.
Now you think, but is not that stupid?
yes it is! Now my question, how can i fix this?
The Nexus S does not boot anymore, not even recovery, the screen just stays black
Still have questions? just ask.
greetz
bart
Click to expand...
Click to collapse
scott8281 said:
Will your phone boot into bootloader mode? Take the battery out and put it back in and hold power and volume up at the same time..
Click to expand...
Click to collapse
No, the screen stays black.
power button + volume up , if you are able to get into BOOTLOADER , then your phone is still alive...
qtwrk said:
power button + volume up , if you are able to get into BOOTLOADER , then your phone is still alive...
Click to expand...
Click to collapse
i did not work
bartjuhhbartyow said:
i did not work
Click to expand...
Click to collapse
Your best hope is to find the right stock firmware flashable through ODIN and flash it that way, as long as your phone can get into download mode. open ODIN and connect the phone with your phone off and press and let go of power while holding in volume up and down at the same time till you see download mode
---------- Post added at 09:30 AM ---------- Previous post was at 09:17 AM ----------
bartjuhhbartyow said:
i did not work
Click to expand...
Click to collapse
heres the link to the Odin files and firmware for your i9023...
http://forum.xda-developers.com/showthread.php?t=1009432
scott8281 said:
Your best hope is to find the right stock firmware flashable through ODIN and flash it that way, as long as your phone can get into download mode. open ODIN and connect the phone with your phone off and press and let go of power while holding in volume up and down at the same time till you see download mode
---------- Post added at 09:30 AM ---------- Previous post was at 09:17 AM ----------
heres the link to the Odin files and firmware for your i9023...
http://forum.xda-developers.com/showthread.php?t=1009432
Click to expand...
Click to collapse
let me try.
My bad, correction on download mode...take out battery, then put battery back in, hold both volume up and down at same time then plug in usb cable, no power button presses
Download mode only works for me if i first plug in the usb data cable. So plug in the acble, remove battery, put it back in and immediately press volume up+ volume down + power buttons.
Some people couldn't get the phone running after flashing the wrong rom.
mike.b93 said:
Download mode only works for me if i first plug in the usb data cable. So plug in the acble, remove battery, put it back in and immediately press volume up+ volume down + power buttons.
Some people couldn't get the phone running after flashing the wrong rom.
Click to expand...
Click to collapse
Neither does, any idea?
download mode and Odin doesn't work?
then looks like there's nothing we can do about it...
qtwrk said:
download mode and Odin doesn't work?
then looks like there's nothing we can do about it...
Click to expand...
Click to collapse
i can't get in Download mode.
bartjuhhbartyow said:
i can't get in Download mode.
Click to expand...
Click to collapse
Unfortunately i don't have any other ideas, as far as i know, ODIN is the only thing that can save it in that state. the only other thing i can think of is maybe the screen is just not working but the phone is on. if thats the case and you can find some stock system images you might be able to use fastboot to return it to stock. do you have the Android SDK and ADB installed on you computer? if so connect your device and opened a command prompt and type- adb devices & you should see a serial number pop up, it’s the serial number of your phone. This means you are all set. If you do NOT see a serial number, then you need to reinstall the drivers. But if the SDK and the drivers are installed and you still don't see your device listed then its probably bricked beyond repair.
If you do see your device listed you can flash it via fastboot by places the stock signed system images into your SDK tools folder and opening a command prompt to the tools folder and typing the following commands....
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash radio radio.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
adb reboot
scott8281 said:
Unfortunately i don't have any other ideas, as far as i know, ODIN is the only thing that can save it in that state. the only other thing i can think of is maybe the screen is just not working but the phone is on. if thats the case and you can find some stock system images you might be able to use fastboot to return it to stock. do you have the Android SDK and ADB installed on you computer? if so connect your device and opened a command prompt and type- adb devices & you should see a serial number pop up, it’s the serial number of your phone. This means you are all set. If you do NOT see a serial number, then you need to reinstall the drivers. But if the SDK and the drivers are installed and you still don't see your device listed then its probably bricked beyond repair.
If you do see your device listed you can flash it via fastboot by places the stock signed system images into your SDK tools folder and opening a command prompt to the tools folder and typing the following commands....
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash radio radio.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
adb reboot
Click to expand...
Click to collapse
My pc did't not adb device found...
bartjuhhbartyow said:
My pc did't not adb device found...
Click to expand...
Click to collapse
thats not a good sign, I'm sure they are people on here that have much more knowledge than myself but unfortunately I'm all out of ideas...best of luck my friend
looks pretty bad. Lets hope someone has a solution. If not you will have to send the device back for repair...
scott8281 said:
thats not a good sign, I'm sure they are people on here that have much more knowledge than myself but unfortunately I'm all out of ideas...best of luck my friend
Click to expand...
Click to collapse
mike.b93 said:
looks pretty bad. Lets hope someone has a solution. If not you will have to send the device back for repair...
Click to expand...
Click to collapse
I send him back, Comes good!
thank's for help al.
Your phones bootloader has been corrupted, you'll gonna need this device to restore it.
http://forum.xda-developers.com/showthread.php?t=1350134
hi, dont send for googling please, i have spent several hours reading
i cant flash TWRP because i cant login into it, after a flash i reboot, and try to press power button, but its resets or cynogenmod is booting, so its probably overwrite the TWRP recovery ...
all this after cm13 update, i know i need old TWRP and stock ROM, but just cant flash it
i use adb
screenshot is attached
talboris said:
hi, dont send for googling please, i have spent several hours reading
i cant flash TWRP because i cant login into it, after a flash i reboot, and try to press power button, but its resets or cynogenmod is booting, so its probably overwrite the TWRP recovery ...
all this after cm13 update, i know i need old TWRP and stock ROM, but just cant flash it
i use adb
screenshot is attached
Click to expand...
Click to collapse
After flashing twrp you have two options. Either turn off your phone by long pressing power button and then use volume down + power button combo to boot into recovery.
Second option is after flashing it do fastboot reboot and immediately hold down the volume down button. It will boot into recovery
Sent from my A0001 using Tapatalk
talboris said:
After flashing twrp you have two options. Either turn off your phone by long pressing power button and then use volume down + power button combo to boot into recovery.
Second option is after flashing it do fastboot reboot and immediately hold down the volume down button. It will boot into recovery
Click to expand...
Click to collapse
I am trying, but it jumps to CM rom, i cant reach twrp recovery..
do you know why reboot twrp.img doesnt work?
Renosh said:
After flashing twrp you have two options. Either turn off your phone by long pressing power button and then use volume down + power button combo to boot into recovery.
Second option is after flashing it do fastboot reboot and immediately hold down the volume down button. It will boot into recovery
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
talboris said:
hi, dont send for googling please, i have spent several hours reading
i cant flash TWRP because i cant login into it, after a flash i reboot, and try to press power button, but its resets or cynogenmod is booting, so its probably overwrite the TWRP recovery ...
all this after cm13 update, i know i need old TWRP and stock ROM, but just cant flash it
i use adb
screenshot is attached
Click to expand...
Click to collapse
talboris said:
I am trying, but it jumps to CM rom, i cant reach twrp recovery..
do you know why reboot twrp.img doesnt work?
Click to expand...
Click to collapse
if i choose the second option FASTBOOT REBOOT ,should i unplug the phone from the pc, or it doesnt matter..
i dont understand what is my problem, i am not that dumb, i start to believe that it says ok, like in screenshot, but twrp is not really there, so when OS doesnt find the recovery its jump to CM rom..
tnx
talboris said:
I am trying, but it jumps to CM rom, i cant reach twrp recovery..
do you know why reboot twrp.img doesnt work?
Click to expand...
Click to collapse
i have the same problem then i used Bacon Root Toolkit for oneplus one from there i flashed twrap .img and i got twrap recovery
commgo said:
i have the same problem then i used Bacon Root Toolkit for oneplus one from there i flashed twrap .img and i got twrap recovery
Click to expand...
Click to collapse
please explain me, i am already 2 days on that problem, can you please guide me?
i found this one http://www.wugfresh.com/brt/
but no tutorial how to use...
commgo said:
i have the same problem then i used Bacon Root Toolkit for oneplus one from there i flashed twrap .img and i got twrap recovery
Click to expand...
Click to collapse
talboris said:
i found this one http://www.wugfresh.com/brt/
but no tutorial how to use...
Click to expand...
Click to collapse
installed bacon root, i try to run ROOT with TWRP it says " ADB DEVICE NOT FOUND"
but if i do fastboot devices via cmd i see my device?
i am so exhausted...
talboris said:
installed bacon root, i try to run ROOT with TWRP it says " ADB DEVICE NOT FOUND"
but if i do fastboot devices via cmd i see my device?
i am so exhausted...
Click to expand...
Click to collapse
If you're in fastboot then only fastboot devices command will work. Adb commands are done when the phone is booted in OS. I saw that photo you posted and it seems you know how to flash TWRP (fastboot flash recovery *****.img). Flash TWRP 2.8.6.0 image if it says successful. Then turn off your phone and use button combo. Can't be any simpler.
Sent from my A0001 using Tapatalk
Renosh said:
If you're in fastboot then only fastboot devices command will work. Adb commands are done when the phone is booted in OS. I saw that photo you posted and it seems you know how to flash TWRP (fastboot flash recovery *****.img). Flash TWRP 2.8.6.0 image if it says successful. Then turn off your phone and use button combo. Can't be any simpler.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
i am really thankful Renosh for you, that image of TWRP really worked, now how can i flash a stable ROM ?
previously i have updated CM 13 and it ****ed up all the system, it happened to a lot people, same issues to everybody, now i need a good ROM, can i have 2 ROMS with TWRP ?
which way is better, adb or bacon root ?
i am so thankful to you Renosh, if you send me your address in private i will send you a post card or something for my gratitude
ok, now what do i do? i can reach the twrp, how can i flash ROM now? i cant to put a ROM into the phone, since firstly i need to mount, but the pc cant mount it
i have ADB and bacon..
talboris said:
ok, now what do i do? i can reach the twrp, how can i flash ROM now? i cant to put a ROM into the phone, since firstly i need to mount, but the pc cant mount it
i have ADB and bacon..
Click to expand...
Click to collapse
In twrp you can copy files just like if you had it on. Just connect to PC and transfer ROM + gapps. Latest CM13 + Open gapps should work perfectly as long as you use TWRP 2.8.6.0. Make sure you have the right drivers for your phone. Google search or go to YouTube you'll find the right drivers
Sent from my A0001 using Tapatalk
Renosh said:
In twrp you can copy files just like if you had it on. Just connect to PC and transfer ROM + gapps. Latest CM13 + Open gapps should work perfectly as long as you use TWRP 2.8.6.0. Make sure you have the right drivers for your phone. Google search or go to YouTube you'll find the right drivers
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
when i connect it to the PC, i dont see it , so i cant transfer the files..
my problem is that i cant transfer the files...
when i connect my other phone a have got a prompt window, but in this case no prompt window, so i guess i need to mount it
but even with mounting i can understand where and how to transfer the files
10x!
update :
i have managed to install TWRP again
so how do i install ROM manually now ?
bacon doesnt help me, PC cant mount TWRP again...
talboris said:
update :
i have managed to install TWRP again
so how do i install ROM manually now ?
bacon doesnt help me, PC cant mount TWRP again...
Click to expand...
Click to collapse
Use ADB Sideload
HI Guys
I bought one chinese mi4 last year on china, I was there, and yes it's is original.
The problem is that I cant install google play, because is blocked. SO I need to upgrade the ROM.
My UPDATER app is not working, when i tried use this to update, when I chose the file, the updater close, so I cant use.
I tryed to update by recovery, but when I click update update file.zip on system one, the phone reboots. tryied CUStom rom, developer rom, global rom. etc...
SO i read a loot of forums and try to install another recovery by fastboot , like CWM, It's not working because i am no root in my device
tryied by adb fastboot and by mi flash, not working " 'recovery' not support flash"
I rooted with kingoo root, but same problem.
So I cant update, can´t install new recovery, I cant install a developer room to root.
I really need help, I tryed everything that i know, checked a lot of foruns, but alone I cant solve this.
I need help please, I fell my xiomi it's completely blocked...
If you download the official rom from miui.com you can flash it with original recovery or you could try the fastboot flash package without using any recovery.
Flashing a custom recovery do not require rooted rom.
To get to fastboot use the command "adb reboot bootloader" then flash your custom recovery. CWM is outdated (i might be wrong) but twrp recovery is much better, just google twrp and download the one for cancro.
If any of those above is not working for you then it might be fake.
Google installer for china roms: http://en.miui.com/forum.php?mod=viewthread&tid=205625&highlight=google+installer
TWRP for cancro: https://twrp.me/devices/xiaomimi3.html
MIUI fastboot roms: http://en.miui.com/a-234.html
wtfhax said:
If you download the official rom from miui.com you can flash it with original recovery or you could try the fastboot flash package without using any recovery.
Flashing a custom recovery do not require rooted rom.
No I cant.
when I choose update.zip on system one on recovery menu, I dont get the menu to update, and click yes, just by clicking on the "update.zip on system one" the phone restarts.
I think I need a way to remove a recovery by hand, as low level I think.
fastboot always fails..... and shows a mgs as this "recovery does not suport flash"
Click to expand...
Click to collapse
darkhyoga said:
wtfhax said:
If you download the official rom from miui.com you can flash it with original recovery or you could try the fastboot flash package without using any recovery.
Flashing a custom recovery do not require rooted rom.
No I cant.
when I choose update.zip on system one on recovery menu, I dont get the menu to update, and click yes, just by clicking on the "update.zip on system one" the phone restarts.
I think I need a way to remove a recovery by hand, as low level I think.
fastboot always fails..... and shows a mgs as this "recovery does not suport flash"
Click to expand...
Click to collapse
Have you tried downloading the fastboot flash package? Download the Global Developer rom for MI4 from the link i've provided and put your device into fastboot then run one of the *.bat file if you are on windows. Before that make sure fastboot detect your device by "fastboot devices".
I do not know any other ways to flash recovery. Maybe others can help you with that.
Click to expand...
Click to collapse
Could you post photo from back side without cover?
P.Kosunen said:
Could you post photo from back side without cover?
Click to expand...
Click to collapse
Sorry Guys I was offline these days
here the back of my phone
I cnt upload link from imageshack before 10 posts WTF....
darkhyoga said:
Sorry Guys I was offline these days
here the back of my phone
I cnt upload link from imageshack before 10 posts WTF....
Click to expand...
Click to collapse
Guys I tried but I cant post any photos before 10 posts,
I think flooding is not an option....
About the fastboot develop version I tryied, same problem...
http://en.miui.com/thread-42873-1-1.html
Check to be sure it is not fake.
My usb has the mark.
the label on backcase is not so good,
My internal battery has the Bm32 label
My model has no sd card
My backcase has the black heat cover like the ooriginal
My speaker looks fine too,
I will have to wait to put pictures, but looks like original...
Can you get it to fastboot mode? Press vol- and power button same time until you see thiis picture:
https://i.ytimg.com/vi/G0aekmshR4A/maxresdefault.jpg
P.Kosunen said:
Can you get it to fastboot mode? Press vol- and power button same time until you see thiis picture:
https://i.ytimg.com/vi/G0aekmshR4A/maxresdefault.jpg
Click to expand...
Click to collapse
I can get there
tried to install but instalation process fails all the time
Try update beta from Mi PC Suite when phone is in fastboot state.
http://pcsuite.mi.com/
http://en.miui.com/thread-95630-1-1.html
Ok I will try....
Sorry gyus
I am givin up to fix this phone.
I have no more patience to try
thanks a lot...
http://en.miui.com/forum.php?mod=viewthread&tid=142056
Try this. Its pretty simple. Assuming you have a Windows PC and a USB cable.
I need the stock firmware for Huawei G8(UAE region) to unbrick my device.
Can someone plz upload it for me?
Hello,
Brother more info please is the model RIO-L01 or what?
And what is the problem exactly?
-Hope- said:
Hello,
Brother more info please is the model RIO-L01 or what?
And what is the problem exactly?
Click to expand...
Click to collapse
I tried to root my device after rooting it went into a boot loop then I flashed it with it custom rom using twrp it still didn't work out. Later I used clear data option in twrp and deleted everything including the rom....Now the message"No rom found " was shown in the recovery....So I tried to replace twrp with normal Huawei recovery, so I used the Huawei extractor tool to extract the recovery file and flash it...mistakenly I flashed Erecovery...now I am stuck with it.. I don't even enter fast-boot mode no even into the normal recovery and is not recognizable by pc
Now, the only way out is to flash stock rom using force update method (by pressing both volume buttons and power button simultaneously)
my phone details: https://ibb.co/kOzQCF
What command did you use to flash the ERecovery?
http://download-c.huawei.com/download/downloadCenter?downloadId=80950&version=321934&siteCode=lt
This is the EU ROM B340 for the L01
Also did you try reinstalling fastboot drivers?
Good luck!
Also next time when you encounter no OS please just move the zip file using the mount function
Or using a SD card
-Hope- said:
What command did you use to flash the ERecovery?
http://download-c.huawei.com/download/downloadCenter?downloadId=80950&version=321934&siteCode=lt
This is the EU ROM B340 for the L01
Also did you try reinstalling fastboot drivers?
Good luck!
Also next time when you encounter no OS please just move the zip file using the mount function
Or using a SD card
Click to expand...
Click to collapse
Thanks, but Will this rom work? because last time i tried flashing French rom and it didnt' work.
jackady said:
Thanks, but Will this rom work? because last time i tried flashing French rom and it didnt' work.
Click to expand...
Click to collapse
It is official
So give it a shot and directly from the company so give it a shot
-Hope- said:
It is official
So give it a shot and directly from the company so give it a shot
Click to expand...
Click to collapse
downloading!:good:
-Hope- said:
It is official
So give it a shot and directly from the company so give it a shot
Click to expand...
Click to collapse
that didnt work
jackady said:
that didnt work
Click to expand...
Click to collapse
Plug the phone to USB
Press vol down +power for a bit this must get you there, you flashed Erecovery but u still can get in fastboot as fastboot has a sepeate partition
-Hope- said:
Plug the phone to USB
Press vol down +power for a bit this must get you there, you flashed Erecovery but u still can get in fastboot as fastboot has a aepeate partition
Click to expand...
Click to collapse
yes iam there now....for the first time in 3 months.....now what to do?????
jackady said:
yes iam there now....for the first time in 3 months.....now what to do?????
Click to expand...
Click to collapse
Option one: flash twrp and then flash custom ROM
Option two: use huawei extractor to extract
System
Recovery
Boot
Cust
And flash them with these commands:
fastboot flash boot BOOT.IMG
fastboot flash recovery RECOVERY.IMG
fastboot flash system SYSTEM.IMG
fastboot flash cust CUST.IMG
Then reboot: fastboot reboot
-Hope- said:
Option one: flash twrp and then flash custom ROM
Option two: use huawei extractor to extract
System
Recovery
Boot
Cust
And flash them with these commands:
fastboot flash boot BOOT.IMG
fastboot flash recovery RECOVERY.IMG
fastboot flash system SYSTEM.IMG
fastboot flash cust CUST.IMG
Then reboot: fastboot reboot
Click to expand...
Click to collapse
that worked...cheers!!!
So I was just messing around with my phone and somehow "destroyed" it. Is it possible to somehow flash it?
xiaomi.eu_multi_POCOX3NFC_V12.0.8.0.QJGMIXM_v12-10
MilanTom said:
So I was just messing around with my phone and somehow "destroyed" it. Is it possible to somehow flash it?
Click to expand...
Click to collapse
Don't worry dude. You can still take your phone to fastboot mode. Download a FASTBOOT rom (*.gz or *.tgz) from mifirm.net then flash it via mi-flash (download from mi-globe). Follow the instructions on mifirm.net
adadwa
ndminhdev said:
Download a FASTBOOT rom (*.gz or *.tgz) from mifirm.net
Click to expand...
Click to collapse
Ok I understand that and I've downloaded the ROM but there is this sentence "1. If Fastboot firmware. The ext. must be tgz. If not. Rename it from .gz to .tgz. Extract it by WinRAR" and also these sentences "ZIP. ZIP ROM using Update function in System or TWRP EU. EU ROM flash using TWRP".
I am just completely lost
To be simple : your flash went wrong probably with a bad rom download or a bad flash method.
If I were you I'd reread the post on installing Xiaomi.eu rom and redownload the whole.
Install OrangeFox recovery with the corresponding thread in the forum and ask if you're still lost
By the way, how did you flash that ROM?
Howell said:
By the way, how did you flash that ROM?
Click to expand...
Click to collapse
Well I started on this site https://magiskmanager.com/#How_to_I...Version_220_on_Android_Custom_Recovery_Option and downloaded the stuff that the site said was needed
And which recovery are you using ?
You should be able to reflash stock and recover your phone using the MiFlash tool.
Download fastboot ROM here, and MiFlash tool here.
And also the problem is, that my phone (Poco X3 NFC) isn't being shown in the MiFlash software. I can access the fastboot screen on my phone and yet it still won't show up
Adb drivers are installed ?
Howell said:
Adb drivers are installed ?
Click to expand...
Click to collapse
Yessir
Howell said:
And which recovery are you using ?
Click to expand...
Click to collapse
I don't know If I even have one, because when I hold Volume + and Power button, nothing happens
MilanTom said:
I don't know If I even have one, because when I hold Volume + and Power button, nothing happens
Click to expand...
Click to collapse
But I am pretty sure I tried to install TWRP Recovery
Mate that's just caused by something going wrong. The only times I get that message is the times I have tried to flash a GSI.
I don't know if you can with this unit?
I've fixed that about 5 times with miflash or miflashpro.
Do you have miflash?
It forces a reformat of Miui recovery rom an then you can start again. Just pay close attention to the bottom right hand corner an make sure it is off default. Default is 'relock bootloader'.
MilanTom said:
So I was just messing around with my phone and somehow "destroyed" it. Is it possible to somehow flash it?
Click to expand...
Click to collapse
If drivers are installed an
Howell said:
Adb drivers are installed ?
Click to expand...
Click to collapse
everything is up an running you should be able to get it into fastboot mode (picture of little rabbit fixing his android) an use miflash to reformat an force a flash of miui recovery rom.
I had that happen once with me an it turned out it was my type c cable. Pulled it out an plugged in a wala. PC could connect with my Poco
Bryceicle1971 said:
I had that happen once with me an it turned out it was my type c cable. Pulled it out an plugged in a wala. PC could connect with my Poco
Click to expand...
Click to collapse
The problem is that my computer can't find my phone. Nothing happens when I plug in the USB-C Cable. It doesn't work on the Fastboot screen nor does it work on "the System has been destroyed" screen. I am pretty sure I downloaded the neeeden drivers. And also, the phone was being found/recognized in the working state.
You need to extract then extract again. You double extract with a fastboot image. Then in miflash you find where you extracted that image to. Then hit refresh in miflash an your device should show in miflash. Miflash can be a tricky beast till you have practiced using it a few times
Hi. If you haven't fixed it yet you can try this: Download stock ROM from here (make sure it's the right one for your device!), choose Recovery ROM download link. Put it in your ADB folder. Do the same with recovery. Download this version of recovery as well. Enter fastboot mode on your device and connect it to your PC. Make sure it's detected. If not, try a different USB port on your computer. Open ADB using Open CMD.bat file in ADB folder.
Type in:
fastboot flash recovery OrangeFox-R11.0_6_Alpha-Unofficial-surya.img (hit Enter)
Type in:
fastboot reboot recovery
You should now be able to access your device internal storage from your PC. Copy the downloaded ROM file and OrangeFox-R11-Unofficial-Beta-surya-10-01.zip to your phone (put them in "Download" folder so they're easy to find).
Using Orange Fox recovery file manager find OrangeFox-R11-Unofficial-Beta-surya-10-01.zip and flash it then REBOOT TO RECOVERY.
Using Orange Fox recovery file manager find your ROM file and flash it. Do not reboot! Hit BACK and choose WIPE in Orange Fox menu (Trashcan icon, second from the right) and switch to Format Data at the top. Read the instructions and follow them by typing YES. Reboot to system. You should now have a working device with a clean stock ROM and a custom recovery installed and keep messing around with it
MocnePifko said:
Put it in your ADB folder.
Click to expand...
Click to collapse
Just two more question.
Where does one get the ADB folder? I may have downloaded a few but I don't know if those were good/correct for my device.
And what can I do when the device is not being detected by my computer? Like should I download and install some new drivers?
But can you reach the fastboot splash in your phone?