Database Info

help

can someone who have and mt7 tl10 do a twrp backup and send me it i fked up my phone every single rom i install it just keeps boot looping

papoose515 said:
can someone who have and mt7 tl10 do a twrp backup and send me it i fked up my phone every single rom i install it just keeps boot looping
Click to expand...
Click to collapse
If you're installing stock rom you must have stock recovery. If you're installing newer version of current rom do a wipe data, wipe dalvik and wipe cache.
Sent from my HUAWEI MT7-L09 using Tapatalk

i forgot to say it won't boot into stock recovery only boots to cwm or twrp it only boots in stock when i have usb when it does that it goes to 90 then fail tried fastboot flashing cust/boot/system

Similar Problem
i have as MT7-L09 that will not even boot into a recovery or fastboot or get past the boot logo and does not connect via ADB any help ?

Foxtv69 said:
i have as MT7-L09 that will not even boot into a recovery or fastboot or get past the boot logo and does not connect via ADB any help ?
Click to expand...
Click to collapse
with the phone off plug in the usb and hold the vol down and power button

papoose515 said:
with the phone off plug in the usb and hold the vol down and power button
Click to expand...
Click to collapse
i now have the phone in fastboot mode but the PC still will not connect even though i have done fresh installs of the ADB and phone drivers so i can not execute any of the ADB commands to flash stock recovery or stock ROM back to the phone any help from here ?

Foxtv69 said:
i now have the phone in fastboot mode but the PC still will not connect even though i have done fresh installs of the ADB and phone drivers so i can not execute any of the ADB commands to flash stock recovery or stock ROM back to the phone any help from here ?
Click to expand...
Click to collapse
plug it out then back in then fastboot flash cust/recovery

papoose515 said:
plug it out then back in then fastboot flash cust/recovery
Click to expand...
Click to collapse
i did that unplugged then plugged back in i tried to flash recovery flie and i get this prntscr. com/8qy4o1 (new member so cant post link) and then when i try and do cust its saying the file does not exist even though im lunching CMD within the folder from which all the files are located prntscr. com/8qy60q (new member so cant post link)
Sorry but this is the first big problem ive run into with a android device after the 3 others ive had experience with all the help is appreciated

Foxtv69 said:
i did that unplugged then plugged back in i tried to flash recovery flie and i get this prntscr. com/8qy4o1 (new member so cant post link) and then when i try and do cust its saying the file does not exist even though im lunching CMD within the folder from which all the files are located prntscr. com/8qy60q (new member so cant post link)
Sorry but this is the first big problem ive run into with a android device after the 3 others ive had experience with all the help is appreciated
Click to expand...
Click to collapse
does cust have numbers before it?

papoose515 said:
does cust have numbers before it?
Click to expand...
Click to collapse
this is what i get with cust i may be doing this part wrong with cust i haven't come across this method before prntscr. com/8qyesu

Foxtv69 said:
this is what i get with cust i may be doing this part wrong with cust i haven't come across this method before prntscr. com/8qyesu
Click to expand...
Click to collapse
can't view that link

papoose515 said:
can't view that link
Click to expand...
Click to collapse
prntscr .com/8qyt3k just take the space out of the link so its not a broken link

NVM..... Delete.

Does Anyone Know any further things i could try ? as the phone still functions i just cant get it out of fastboot mode or to connect to my PC so i dont want to throw it away as a lost cause just yet

[RECOVERY] start loop on TWRP after a backup on x2 gem-702L

good morning,
(escuse me for my english I am french,thank google)
I was passing by Rom KangVIP B015 (Android 5.0) and TWRP TWRP-ENG-5.0,
I was the original B003 702L, all works very well for several days,
I decided to make another backup with TWRP (with compression) externally on my sd,
all goes normally, and I then reboot,
and continually find myself on the recovery TWRP menu.
Can not start the system by download from TWRP.
I restored my backup but always the same.
I can put myself in download from the connected computer,
and I have access to the adb command.
by searching the internet, the problem has already produced on LG2 and other,
and there would execute commands either by download or in TWRP in terminal mode.
but I do not know if that works under the MediaPad x2,
and knows the commands to perform.
thank you in advance to all those who have the solution to this problem

Did you try to Factory reset/Wipe your phone from recovery?

hagba said:
Did you try to Factory reset/Wipe your phone from recovery?
Click to expand...
Click to collapse
yes but screwy does not work, always the same

jeanyann said:
yes but screwy does not work, always the same
Click to expand...
Click to collapse
Try to flash the stock recovery with the ADB, and then install back the original ROM from the sdcard with the local updater.

jeanyann said:
good morning,
(escuse me for my english I am french,thank google)
I was passing by Rom KangVIP B015 (Android 5.0) and TWRP TWRP-ENG-5.0,
I was the original B003 702L, all works very well for several days,
I decided to make another backup with TWRP (with compression) externally on my sd,
all goes normally, and I then reboot,
and continually find myself on the recovery TWRP menu.
Can not start the system by download from TWRP.
I restored my backup but always the same.
I can put myself in download from the connected computer,
and I have access to the adb command.
by searching the internet, the problem has already produced on LG2 and other,
and there would execute commands either by download or in TWRP in terminal mode.
but I do not know if that works under the MediaPad x2,
and knows the commands to perform.
thank you in advance to all those who have the solution to this problem
Click to expand...
Click to collapse
Did you unlock the bootloader before you flashed anything?

ajsmsg78 said:
Did you unlock the bootloader before you flashed anything?
Click to expand...
Click to collapse
yes , booloader unlock , all works very well for several days, with Rom KangVIP B015 (Android 5.0) and TWRP TWRP-ENG-5.0,

hagba said:
Try to flash the stock recovery with the ADB, and then install back the original ROM from the sdcard with the local updater.
Click to expand...
Click to collapse
flash the stock recovery with the ADB , how I did in adb command, what I use Rom
i have GEM-702L , GEM-703L_B015 , GEM-703L_EMUI3.1_Android5.1_B106 , in dload
and all the rom KANGVIP (B015,B106,B109,B111) in zip

jeanyann said:
flash the stock recovery with the ADB , how I did in adb command, what I use Rom
i have GEM-702L , GEM-703L_B015 , GEM-703L_EMUI3.1_Android5.1_B106 , in dload
and all the rom KANGVIP (B015,B106,B109,B111) in zip
Click to expand...
Click to collapse
You need to boot into bootloader mode and fastboot flash 4 img files. It's mentioned in multiple threads here just use the search button or look in this thread:
http://forum.xda-developers.com/mediapad-x2/general/how-to-flash-rom-x2-gem-703l-gem-702l-t3228915

ajsmsg78 said:
You need to boot into bootloader mode and fastboot flash 4 img files. It's mentioned in multiple threads here just use the search button or look in this thread:
http://forum.xda-developers.com/mediapad-x2/general/how-to-flash-rom-x2-gem-703l-gem-702l-t3228915
Click to expand...
Click to collapse
I extracted the images of the GEM and GEM-702L-703L, but I have an error
when I want flasher fastboot flash system SYSTEM.img, both with
the system images of the 702L and 703L,
LOAD_FILE: could not allocate -2140949684 bytes for 703L
so I did not flash only the boot.img and recovery.img and reflash
the recorery TWRP TWRP-ENG-5.0, then reboot on TWRP,
restoring my last backup, and all is back to normal,
all working again.
thank you again to all

Can't use twrp and start my honor 8

Hello,
Sorry for this post but i have a real problem !
I have install a twrp and root my phone for flash rom but now i have factory rest and haven't any OS...
I cant' launch twrp and even i install with fastboot. I have just "your device is booting now".
I don't know how to "backup" and repair my honor.
If anyone undernstand my problem...
ps : I'm really sorry for my english

If you need picture or more information please tell me ...

Try to install TWRP 3.0.2 via fastboot. Install a stock image.zip via TWRP

djx24 said:
Try to install TWRP 3.0.2 via fastboot. Install a stock image.zip via TWRP
Click to expand...
Click to collapse
Thanks for your answer
I try to install a recovery on fastboot but when i reboot my phone stay on "your device is booting now..." that's the problem ...

I have try to use "fastboot boot twrp.img" but failed because command not allowed.
Try to erase but not allowed too. I can flash recovery, or flash boot but change nothing...

Rommco05 said:
Try instal full fw (M B120 or B131) via dload method
Click to expand...
Click to collapse
dload method ? But i need my phone turned ON for that no ? or i need twrp ? But i can't use recovery mode. I can use only erecovery and fastboot.
Thanks for your message

Rommco05 said:
...??? no. Turn off phone and turn on with buttons vol+/vol-/on,off press together. Make folder on SDcard dload/ put inside unzip full fw.
Click to expand...
Click to collapse
Thanks you ! Installing update...
I think it work
(Sorry for all i'm a noob ...)

Mate 7 TL-10 (soft)bricked, no OS, no recovery, please help!

Hello Guys,
Please help me in the following case.
I have a Mate 7 TL-10. Originally, it was from China, it's system was Chinese.
Today, I rooted, I changed the location from CN to EU (I am from Hungary). Everything was okay, I wanted to flash a new (European) ROM, but before it, I wanted to wipe. Oh, no! Here, I was stupid. I wiped everything by that recovery, what the SRK Tool installs.
I lost everything, it wrote me, that no OS. I cannot enter to the recovery, it stucked at the Huawei logo. I even cannot switch the phone off, it only restarts!
Can you please help me to solve this problem and survive my phone?
Thank you for all in advance.

montisHU said:
Hello Guys,
Please help me in the following case.
I have a Mate 7 TL-10. Originally, it was from China, it's system was Chinese.
Today, I rooted, I changed the location from CN to EU (I am from Hungary). Everything was okay, I wanted to flash a new (European) ROM, but before it, I wanted to wipe. Oh, no! Here, I was stupid. I wiped everything by that recovery, what the SRK Tool installs.
I lost everything, it wrote me, that no OS. I cannot enter to the recovery, it stucked at the Huawei logo. I even cannot switch the phone off, it only restarts!
Can you please help me to solve this problem and survive my phone?
Thank you for all in advance.
Click to expand...
Click to collapse
Don't worry tell me what firmware you have is your bootloader unlocked or not it'll be fine don't worry...

fazi2015 said:
Don't worry tell me what firmware you have is your bootloader unlocked or not it'll be fine don't worry...
Click to expand...
Click to collapse
Hello!
Than kyou very much for your help. Yesterday night, I could survive the phone, this is what I did:
VOL- and POWER: fastboot mode
In fastboot mode, I connected to the PC and (beofr it, I downloaded an update.zip and extracted:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash boot boot.img
Now, it is working (seems to be) But what should I do with the other .img files from the update.zip?
Do I have to do any other steps? I think yes, 'cause if I check the Vendor info in th*#*#2846579#*#* menu, there is no country code in my phone
Can you help me, what should I do?
Thank you for your help again.

montisHU said:
Hello!
Than kyou very much for your help. Yesterday night, I could survive the phone, this is what I did:
VOL- and POWER: fastboot mode
In fastboot mode, I connected to the PC and (beofr it, I downloaded an update.zip and extracted:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash boot boot.img
Now, it is working (seems to be) But what should I do with the other .img files from the update.zip?
Do I have to do any other steps? I think yes, 'cause if I check the Vendor info in th*#*#2846579#*#* menu, there is no country code in my phone
Can you help me, what should I do?
Thank you for your help again.
Click to expand...
Click to collapse
You can download the mobopx app by chudy on the first post of this page:
https://forum.xda-developers.com/mate-7/general/huawei-mt7-l09-l10-stock-firmware-ota-t3275784
This app lets you change the country/vendor information on your phone, amongst other things

montisHU said:
Hello!
Than kyou very much for your help. Yesterday night, I could survive the phone, this is what I did:
VOL- and POWER: fastboot mode
In fastboot mode, I connected to the PC and (beofr it, I downloaded an update.zip and extracted:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash boot boot.img
Now, it is working (seems to be) But what should I do with the other .img files from the update.zip?
Do I have to do any other steps? I think yes, 'cause if I check the Vendor info in th*#*#2846579#*#* menu, there is no country code in my phone
Can you help me, what should I do?
Thank you for your help again.
Click to expand...
Click to collapse
First off all you should flash your regional firmware(original) then if you want to change region changing region is not big deal download the official one and flash by putting update.app into dload folder in sd card and flash by force update and if you are able to flash recovery then flash twrp recovery and flash custom rom like @chudy rom & @Ale rom if you stay in official states then flash chudy rom much likely to stock and if you like custom rom then flash Ale rom which I use and many other.
Flash twrp recovery and make a full backup then wipe all without sd card and then flash the rom zip file after that wipe both cache and reboot first time it'll take some time but don't worry keep it booting you all done..
Further help needed please ask.:good:

montisHU said:
Hello!
Than kyou very much for your help. Yesterday night, I could survive the phone, this is what I did:
VOL- and POWER: fastboot mode
In fastboot mode, I connected to the PC and (beofr it, I downloaded an update.zip and extracted:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash boot boot.img
Now, it is working (seems to be) But what should I do with the other .img files from the update.zip?
Do I have to do any other steps? I think yes, 'cause if I check the Vendor info in th*#*#2846579#*#* menu, there is no country code in my phone
Can you help me, what should I do?
Thank you for your help again.
Click to expand...
Click to collapse
same probleme here can you help me?

help I have been installing roms for 10 hours and nothing works

hi i just got a honor 6x and i have been following guides and at one point i had lineage os 13 on the phone but it would only boot to the password screen
so then i side loaded resurrection os 5.7 and it didnt have wifi so i tried upgrading emui and now i can't install any rom it just hangs at "patching ssytem unconditonally"
i have TWRP running on the phone. i just want to go back to stock OS. please help how do i do this?

unknown command [errno] update_huawei_pkg_from_ota_zip from zip failed
when i try to flash the stock huawei rom

i can run fastboot and twrp but nothing else works. i will paypal 15 dollars to someone who can help me

You can download the full firmware directly from honor, unzip it, and place the update.app file in a dload folder that you create on your sd card. Power of the phone then hold volume up, down, and power at the same time to initiate an automatic flash of the room you downloaded. This will erase everything, so be aware.

1.Download full rom from huawei support site then extract update.app
2.place it in dload folder using twrp (in twrp enable MTP)
3.Now extract the recovery.img from update.app using huawei extractor and flash it using fastboot flash recovery recovery.img
4.now power off phone then start phone holding Volume Up ,Volume Down & power button simultaneously
5.it will start updating

Rommco05 said:
Which is your model number and which twrp u have installed?
Click to expand...
Click to collapse
l24 and twrp-3.1.1-0-berlin.img

siddhrsh said:
1.Download full rom from huawei support site then extract update.app
2.place it in dload folder using twrp (in twrp enable MTP)
3.Now extract the recovery.img from update.app using huawei extractor and flash it using fastboot flash recovery recovery.img
4.now power off phone then start phone holding Volume Up ,Volume Down & power button simultaneously
5.it will start updating
Click to expand...
Click to collapse
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw

juicyapply said:
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
Click to expand...
Click to collapse
flash recovery only after placing the update.app in dload folder
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
juicyapply said:
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
Click to expand...
Click to collapse
flash recovery only after placing the update.app in dload folder then reboot your device using 3 button

Rommco05 said:
BLN-L24C567? If yes flash via twrp this two zips, after make reboot recovery in twrp. Should by now in stock recovery and here tap factory reset and after reboot. Now you will be hopefully in emui. Follow only if is correct your fw number which is mentioned here
http://update.hicloud.com:8180/TDS/...24_hw_usa/update_data_full_BLN-L24_hw_usa.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82815/f1/full/update.zip
Click to expand...
Click to collapse
by flash, you mean press the top left install button?

Rommco05 said:
Yes, download them and put to sdcard or inter memory. Flash first region and after update zip
Click to expand...
Click to collapse
The region flashes sucessfully but update.zup fails on '32k crc check'

Rommco05 said:
Any news juicyapply ?
Click to expand...
Click to collapse
update_huawei_pkg_from_ota_zip: update pcakage from zip failed
updater process ended with ERROR: ?
Errror installinc zip file '/sdcard/update.zip'

3.1.0-2 is the twrp version

it just says your device is booting now forever

i put it on stock recovery, i can put it back on twrp though

juicyapply said:
i put it on stock recovery, i can put it back on twrp though
Click to expand...
Click to collapse
No, just do a reset in stock recovery.

venugopalu007 said:
No, just do a reset in stock recovery.
Click to expand...
Click to collapse
it doesn't boot to stock recovery, even when i hold down volume and power buttons
i got the recovery using the extractor using huawei

oh my god ok now it is stuck at blue honor screen for an hour after update installed automatically without pressing anything. i just pressed volume and power buttons and it started updating. no menu was provided

now it says your device failed verificitaion

so now the bootloader is locked again and the update installed, but it still doesn't boot and when i try to update again it says verification failed

juicyapply said:
now it says your device failed verificitaion
Click to expand...
Click to collapse
I had the same problem once.
You can try to flash the cust partition of your phone. The "device verification failed"-message should disappear then. It's not enough to only flash boot, system and recovery. If there is a problem with the cust partition of your phone you can also have problems with flashing stock roms via "dload"-method.
1. Download the right stock firmware via the huawei firmware finder. You usually have two .zip files (e.g. update.zip & update_full_BLN-L21_hw_eu.zip). The image file for the cust partition can be found in the update_full_BLN-L21_hw_eu.zip (choose the right one for your model).
2. Unpack update_full_BLN-L21_hw_eu.zip and extract the cust partition with the huawei firmware extractor.
3. Put your phone into fastboot mode
4. Use the following command: fastboot flash cust cust.img
5. Try to boot into your stock rom.