Wondefoo PX5 --> OEM TPMS Car VW polo - MTCD Android Head Units Q&A

I bought a wondefoo PX5 car radio.
On my car I have a tire pressure drop sensor, brand VW Polo 6r 2011. (It's only a button's to reset after inflate the tire).
When the pressure down, i have a light on.
Do you know if the original detector can be connected to the station without a USB module with the TPMS APK ?

Related

Tab 4 7.0 in Dash install

***THIS IS NOT A HOW TO INSTALL***
I have a 2008 Honda CRV EX-L and I wanted a touch screen display but didn't want to spend the money on a new head unit. So I decided to use an old single DIN Pioneer head unit with a double DIN dash kit and my Tab 4 7.0 (T237P) as my touch screen.
Materials used:
1) Samsung Galaxy Tab 4 7.0 (T237P)
2) Pioneer DEH-3200U
3) Honda Radio Harness Metra 70-1722
4) Scosche HAAB Honda Antenna Adapter Plug
5) Metra Axxess ASWC-1 Steering Wheel Control Interface
6) Car Charger DC Converter Module 12V To 5V 3A 15W with USB Cable to charge the tablet and power the Metra Axxess ASWC-1
7) USB Aux Bluetooth Adapter for audio to Pioneer DEH-3200U
8) USB Female Y Splitter to power the tablet and USB bluetooth adapter
9) Wire Taps so I can keep the factory harness in case I decide to install the factory radio again
10) thin heavy stock cardboard from binder and black t-shirt to cover the Pioneer DEH-3200U and to have something for the tablet to rest on
***reserved***
Update: v2.0 includes phone (Note 3) mount as well as the tablet mount, this way I can either use the tablet or my phone.
looks nice! this tablet is way better than "android auto's" android system! might do same! thanks for part list so i know something where start from!
Nice! Looks really clean
princeferoz said:
***THIS IS NOT A HOW TO INSTALL***
I have a 2008 Honda CRV EX-L and I wanted a touch screen display but didn't want to spend the money on a new head unit. So I decided to use an old single DIN Pioneer head unit with a double DIN dash kit and my Tab 4 7.0 (T237P) as my touch screen.
Materials used:
1) Samsung Galaxy Tab 4 7.0 (T237P)
2) Pioneer DEH-3200U
3) Honda Radio Harness Metra 70-1722
4) Scosche HAAB Honda Antenna Adapter Plug
5) Metra Axxess ASWC-1 Steering Wheel Control Interface
6) Car Charger DC Converter Module 12V To 5V 3A 15W with USB Cable to charge the tablet and power the Metra Axxess ASWC-1
7) USB Aux Bluetooth Adapter for audio to Pioneer DEH-3200U
8) USB Female Y Splitter to power the tablet and USB bluetooth adapter
9) Wire Taps so I can keep the factory harness in case I decide to install the factory radio again
10) thin heavy stock cardboard from binder and black t-shirt to cover the Pioneer DEH-3200U and to have something for the tablet to rest on
Click to expand...
Click to collapse
And the software? What software are you using?
sweetbanana said:
And the software? What software are you using?
Click to expand...
Click to collapse
I'm currently using AutoMate. In the pictures I was using CarHomeUltra
Sorry to bother u mate, i havent gone through all the forum and i wanted to ask, is there a standalone rom tht i can just flash to an android tablet to perfom the in dash car audio, i mean jst like those android head units?

PX5 SWC Wiring

Hi guys. I have a PX5 unit that I'm installing in a 2017 F350 Super Duty. I am using THIS dash kit, which comes with a module that provides the wiring for some of the buttons on the new bezel, as well as a 3.5mm male jack for the SWC controls. The head unit has a KEY1, KEY2, and a ground for the SWC controls. I assume that I need to wire in a 3.5mm female jack to these to restore the SWC buttons, so I was curious if anyone has any experience with this. I've read that you need to use all three wires in some places, others say to not use the ground. Thanks in advance for any assistance.

PX5 TPMS updated apk?

Does anyone have a better or updated app for the built in PX5 TPMS feature/software? I'm running a newly purchased 4/32gb octacore px5 (branded XTRONS 9" Octa-Core Android 8.0 Car Head Unit GPS Stereo DAB+ 4G for BMW E46 M3) with a 9in screen running Android 8.
I've just installed the internal replacement valve TPMS sensors on mine and the TPMS module itself. Having issues with reception (2 out of 4 sensors reading) and the box that's installed, but apparently it doesn't want to be near other electrics so I will move it up the dash towards the vents to fix that as I believe it's a radio reception issue.
The app seems to lack functionality though, I can't see how to pair a new sensor, say for example a spare wheel addition or replacing a wheel. The app also seems to forget it I swap the sensor positions (front and rear right sensors were put on the wrong rims by the tyre shop), I have swapped the front to the rear and after a fresh startup of the head unit after parking the car it's then forgotten that I swapped sensor positions.
Does anyone have a better version of the APK at all?
Is it a USB TPMS unit or does it connect directly to one of the connectors on the back of the radio?
If it is directly connected, try going into Factory Settings and change the TPMS type. Each type runs a different app and some are better than others.
If it is a USB unit, I have a few apks that came with my generic unit that might prove helpful.
OliFos said:
Does anyone have a better or updated app for the built in PX5 TPMS feature/software? I'm running a newly purchased 4/32gb octacore px5 (branded XTRONS 9" Octa-Core Android 8.0 Car Head Unit GPS Stereo DAB+ 4G for BMW E46 M3) with a 9in screen running Android 8.
I've just installed the internal replacement valve TPMS sensors on mine and the TPMS module itself. Having issues with reception (2 out of 4 sensors reading) and the box that's installed, but apparently it doesn't want to be near other electrics so I will move it up the dash towards the vents to fix that as I believe it's a radio reception issue.
The app seems to lack functionality though, I can't see how to pair a new sensor, say for example a spare wheel addition or replacing a wheel. The app also seems to forget it I swap the sensor positions (front and rear right sensors were put on the wrong rims by the tyre shop), I have swapped the front to the rear and after a fresh startup of the head unit after parking the car it's then forgotten that I swapped sensor positions.
Does anyone have a better version of the APK at all?
Click to expand...
Click to collapse
i have the same problem, can you fixed?
https://drive.google.com/file/d/1--pkK1nOxy864qN_tfvQ5xiCerFUkXkM/view?usp=sharing
https://drive.google.com/file/d/1--F5wr5zLuMSdpLg48tbHij5mifAK2iP/view?usp=sharing
Got the same issues with one of the sensors being a replacement and not detected by the box.
Has anyone figured out how reprogram it so it accepts the new sensor?
That learning feature when you press the button in the app doesn't seem to do anything - it just fails after some waiting.
The sensors have an unique id code written on them? Does the code need to be entered in some config file?
Hi yes it is a common problem for me but when the vehicle is moving the sensor reads fine
Hello to everybody. I have a problem with tpms... I need a apk file for install the app. because I don't have on my stereo and I don't know why. someone has a original file ?
Inviato dal mio SM-G950N utilizzando Tapatalk
millab said:
Is it a USB TPMS unit or does it connect directly to one of the connectors on the back of the radio?
If it is directly connected, try going into Factory Settings and change the TPMS type. Each type runs a different app and some are better than others.
If it is a USB unit, I have a few apks that came with my generic unit that might prove helpful.
Click to expand...
Click to collapse
If you have these APKs, can you please share? Thanks!

Question FYT 7862 unit blowing fuses

Trying to install this unit and it keeps blowing both the car fuse for stereo and stereo fuse everytime I plug in the cords any suggestions as been though a few fuses came with factory wiring harness and everything is connected correctly
https://a.aliexpress.com/_mNyiujC
If it's blowing the fuse in the back of the unit, I suspect a defective unit.
Uninstall fuse.apk
Yep must be a defective unit now to try and get seller to help
I have noticed that these FYT units do not have robust ESD (Electro Static Discharge) protection inside.
My Joying unit became damaged after I removed and reinstalled it a few times. The canbus adapter blew a mosfet causing the radio to be always on.
The GPS and one of the 4G antenna connectors seem to be shorted internally where they did work initially.
No sign of any transient suppressors on the main board or in the canbus adapter.
This is bad because a car interior is a very high risk enviroment for ESD damage. :-(

Xtrons PQS1139BL issues

Hello, I purchased an Xtrons PQS1139BL and it's been a toxic relationship. I love the features but its very buggy. Xtrons says there are no updates for this unit and I think they are tired of dealing with me.
This is my bug list.
Every electrical noise came out the speakers such as alternator whine, the idle are control valve on the engine, turning the headlighs on and off causes a pop. The solution so far has been Xtrons sent me a filter that removed 75% of the noise but my wife still could not stand riding in the car so I gutted the factory BMW DSP and added my own 4CH amp the is ran off of the RCA cables and that resolved 99% of the noise. But this unit only has front RCA out so now I lost fader control.
Unit lockups about 1 to 2 minutes after starting the car the UI will freeze and what is on the screen will stay but the steering wheel controls will still continue to beep when pressed eventually the screen will turn black and the steering wheel controls will stop beeping then sometimes the unit will reboot and come back and other times I need to restart the car at a red light or pull over and restart. My wife pointed out that it mostly happens after I reverse which lead me to this forum and as an experiment I cut the reverse input to the headunit and now the lockups after starting the car went from 50% to 5% but now I lost my backup camera. One thing to add is that once the unit is up and running it works fine so I don't think it's a heat issue.
Wireless carplay, the unit came with an app called multiplay and half of the time it would say "MFI chip not found". So Xtron's sent me USB adapter that uses an app called autokit and that works okay but my phone shows that it's charging but it's actually loosing a charge so I bought a USB Y adapter to add power from a cigarette lighter plug.
The versions that my unit shows is
Model PX6
Android 10
Build number rk3399-userdebug 10 qq2a.200305.004.a1 eng.hct2.20210630.152440 test-keys
Kernel version 4.19.111+
#131 Thurs Jun 24 2021
MCU version MTCH_GS_V3.78_3
May 31 2021
Is there any hope for this? Can i update it? Can I wipe and reload it? Can I pull logs off of this? I'm about over it.
This is the unit
10.25" Screen Android 11 6-Core 4+64GB Car Radio GPS For BMW E39 E38 740i 750i | eBay
Find many great new & used options and get the best deals for 10.25" Screen Android 11 6-Core 4+64GB Car Radio GPS For BMW E39 E38 740i 750i at the best online prices at eBay! Free shipping for many products!
www.ebay.com
This is the carplay adapter
Auto Car Navigation Car Auto Play Module IOS & Android Phone USB Dongle Adapter | eBay
Find many great new & used options and get the best deals for Auto Car Navigation Car Auto Play Module IOS & Android Phone USB Dongle Adapter at the best online prices at eBay! Free shipping for many products!
www.ebay.com
Thanks for reading this.
Jeremy
Hey did you found any solution for this problem?
p.a.i.n.k.i.l.l.e.r said:
Hey did you found any solution for this problem?
Click to expand...
Click to collapse
I resolved the noise issue with an aftermarket amp and the locking up i patched it with a switch in the glove box to reboot the headunit manually. That's the wifes job. This xtrons unit is complete junk.
Jeremy.flaugh said:
I resolved the noise issue with an aftermarket amp and the locking up i patched it with a switch in the glove box to reboot the headunit manually. That's the wifes job. This xtrons unit is complete junk.
Click to expand...
Click to collapse
Xtrons, complete junk. Yep - fake Chinese origin brands that sell from various factories at their best margins (buy cheap, sell expensive)
Jeremy.flaugh said:
I resolved the noise issue with an aftermarket amp and the locking up i patched it with a switch in the glove box to reboot the headunit manually. That's the wifes job. This xtrons unit is complete junk.
Click to expand...
Click to collapse
I have xtrons original software if you need let me know
p.a.i.n.k.i.l.l.e.r said:
I have xtrons original software if you need let me know
Click to expand...
Click to collapse
Yeah what do you have? Does it resolve the lockup issues?

Categories

Resources