Database Info

Nissan QASHQAI/Rogue Dasaita PX5 Installation

Hi there,
I'm trying to install one of the Dasaita PX5 headunits in my new QASHQAI and I've hit a snag. Two of the connectors on the wiring harness included with the unit are identical, but have very different wires coming out of them. I assume they are dependant in your cars factory setup, but since my unit didn't come with any sort of instructions I'm at a loss as to what they are.
My car has the small colour LCD from factory, with a factory rear camera (not the 360 camera) and front/rear parking sensors. Standard manual AC controls (not dual climate).
Any guidance would be appreciated!

I would assume that the "Low Plug" is for cars with low a equipment variant (as you can tell from the cables going into the connector already) and the other one is for cars with a more stuff.
So as of your cars description I would say go with the medium one and test it out.

Yep, I had a better look at the existing wiring loom today and the wires matched pretty well.
Decided to give it a try and it works brilliantly!
Factory rear camera and steering wheel controls all work, and I swear the audio quality using on board apps is better than the factory unit.

Hello, is it an android 8.0 unit ? If yes, does bluetooth works ?

This unit runs Android 6.0. There are 8.0 upgrade guides floating around but I honestly haven’t had the time or inclination to try it, the unit is working really well as is.
Bluetooth phone calls work great.
Bluetooth audio streaming works but I’ve used it maybe once briefly (I do all music and streaming directly on the headunit) so I cant really comment on how well audio works.

Ok thanks, I'm considering byuing a dasaita but I heard bluetooth doesn't work with android 8.0 units !

M4nu83 said:
Ok thanks, I'm considering byuing a dasaita but I heard bluetooth doesn't work with android 8.0 units !
Click to expand...
Click to collapse
Hi, I have Android 8 unit since 4 months and bluetooth works fine. I use bluetooth for phone calls, for audio I use Spotify from unit app.

mitchello said:
Yep, I had a better look at the existing wiring loom today and the wires matched pretty well.
Decided to give it a try and it works brilliantly!
Factory rear camera and steering wheel controls all work, and I swear the audio quality using on board apps is better than the factory unit.
Click to expand...
Click to collapse
hi mitchello,
I have the same car radio model, I have a question about the cable connection for the rear camera, I have a yellow cable from the power cable called cvbs, and two yellow cables on the camera aux cable, one says Aux Video In and the other Cam VIN, to which should I connect the Cvbs cable?
?

rafiuxdoo said:
hi mitchello,
I have the same car radio model, I have a question about the cable connection for the rear camera, I have a yellow cable from the power cable called cvbs, and two yellow cables on the camera aux cable, one says Aux Video In and the other Cam VIN, to which should I connect the Cvbs cable?
?
Click to expand...
Click to collapse
I have exatly the same problem, with my unit : 2 yellow cables but the factory reverse camera don't start !

krysthof972 said:
I have exatly the same problem, with my unit : 2 yellow cables but the factory reverse camera don't start !
Click to expand...
Click to collapse
Hello, What Is u Nissan vehicle model?
I have a Nissan Qashqai 2018, support Dasaita says the connect cam vin whit Cvbs. I have not done the test yet.

krysthof972 said:
I have exatly the same problem, with my unit : 2 yellow cables but the factory reverse camera don't start !
Click to expand...
Click to collapse
Have you connected the reverse trigger wire? I *think* its pink in color.. or blue. You'll probably have to splice it. This trigger is connected to your reverse gear, so that when you are in reverse, the screen will switch to camera.

rafiuxdoo said:
hi mitchello,
I have the same car radio model, I have a question about the cable connection for the rear camera, I have a yellow cable from the power cable called cvbs, and two yellow cables on the camera aux cable, one says Aux Video In and the other Cam VIN, to which should I connect the Cvbs cable?
?
Click to expand...
Click to collapse
Hey mate, I'd have to pull out my unit to check, but I'd expect you connect it to the CAM IN connector. The White/Red RCAs should be for the AUX input in the armrest, and the yellow RCA for the camera.
I assume you have a factory camera yes? With it all connected my factory camera automatically flicks on when in reverse (even if the unit is still booting).

rafiuxdoo said:
Hello, What Is u Nissan vehicle model?
I have a Nissan Qashqai 2018, support Dasaita says the connect cam vin whit Cvbs. I have not done the test yet.
Click to expand...
Click to collapse
thank you for the answer, CVBS don't work
it's 2015 Qashqai

I'm really drawn to this head unit for my 2017 Rogue SL AWD. My current non-Android Auto/Car play unit is basically just a bluetooth steamer. The built-in maps are so slow, outdated, cumbersome and without helpful traffic info that I simply use Google maps. This new unit looks sharp and allows full functionality without paying Nissan that crazy monthly fee.
I'm in 100% if I can more or less just do a swap out.
---------- Post added at 10:29 PM ---------- Previous post was at 10:23 PM ----------
Amazon has one listed with the PX6 CPU, so maybe slightly updated... "Dasaita 10.2" Android 9.0 Bluetooth Car Stereo Head Unit with 4G RAM / 64G ROM for Nissan X-Trail Qashqai Rogue 2014 2015 2016 2017 Car Radio Touch Screen GPS Navigation Support USB Bose AMP" at 499.

emtownsend said:
I'm really drawn to this head unit for my 2017 Rogue SL AWD. My current non-Android Auto/Car play unit is basically just a bluetooth steamer. The built-in maps are so slow, outdated, cumbersome and without helpful traffic info that I simply use Google maps. This new unit looks sharp and allows full functionality without paying Nissan that crazy monthly fee.
I'm in 100% if I can more or less just do a swap out.
---------- Post added at 10:29 PM ---------- Previous post was at 10:23 PM ----------
Amazon has one listed with the PX6 CPU, so maybe slightly updated... "Dasaita 10.2" Android 9.0 Bluetooth Car Stereo Head Unit with 4G RAM / 64G ROM for Nissan X-Trail Qashqai Rogue 2014 2015 2016 2017 Car Radio Touch Screen GPS Navigation Support USB Bose AMP" at 499.
Click to expand...
Click to collapse
Be prepared to be underwhelmed , over promised and under delivered.

marchnz said:
Be prepared to be underwhelmed , over promised and under delivered.
Click to expand...
Click to collapse
I bought mine from Ali Express ( Dasaita 10.2 - PX6 Android 9 ) and shipped to Australia in 5 days, I couldn't be more happier with the head unit.
All the Qashqai functions operate including the 360 all round camera, TPMS, Android auto and Carplay.

Hello All
I have dasaita px6 installed on my Qashqai as well
I want to know external MIC location best place as the built-in MIC was good initially then it became poor
Installed external MIC under the steering wheel but still voice is far

Hi all, i have Nissan Qashqai 2018 and i just few days ago i got my Dasaita PX5. Everything looks fine and work very well, but I am little bit concerned about noise which is coming out from device. Every time when I accelerate I am getting some kind of whistling noise coming out from device. Noise sometimes disappears but than come back again and started to be very noise. I tested and its coming from screen device, only disappears when I unplug the big black plug (which I think it is a main electrical socket or power supply because without that is not working). Do you guys have any similar issues before? Do you have any suggestions how to fix same one?
Second question is regarding to the SWC option. I connected everything how they did suggest but still is not working. I did choose proper settings on display and still nothing changed. I tried to contact support but until today no answer.
All help is more than welcome

sandpita said:
I bought mine from Ali Express ( Dasaita 10.2 - PX6 Android 9 ) and shipped to Australia in 5 days, I couldn't be more happier with the head unit.
All the Qashqai functions operate including the 360 all round camera, TPMS, Android auto and Carplay.
Click to expand...
Click to collapse
Do you have any pics you wouldn't mind sharing? Also, this is several months later, so... how do you still like it?
Thanks!

emtownsend said:
Do you have any pics you wouldn't mind sharing? Also, this is several months later, so... how do you still like it?
Thanks!
Click to expand...
Click to collapse
Had the HU for over a year now and it's faultless,everything just works i.e Factory Park Assist, 360 all round camera, GPS,DAB+.
Also I have the Carlinkit Carplay USB dongle which for me works every time with no issues where others have issues with inbuilt Carplay HU using ZLink.

Erisin head unit in Skoda Superb, static across all channels

Installed the Erisin ES7915v in a 2009 Skoda Superb a few days ago. PX5 running Android 9.0.
Install was fine and things are working well except for a constant static that appears whenever the volume is above zero. The static does not change volume but it's easily noticeable at lower volumes especially on e.g. non-music radio. There was no static at all on the previous setup (the factory fitted Skoda Columbus / RNS 510). Turn volume to zero and static disappears.
The car has an amp under the passenger seat (factory fitted again). It doesn't use RCA cables - just standard speaker wire cables from the wiring harness in the head unit down to the amp and then out to the speakers. The head unit has the option of using RCA cables.
So:
1. I've altered gain up to -15 and it doesn't have any overall effect.
2. While the static volume doesn't change, the pitch can do so with acceleration etc.
3. It's not related to the screen or the button colours - I've altered those / turned screen off but it has zero effect.
4. I can use the software amp to bring down treble frequencies which helps lower the static but that's not ideal and doesn't come close to eliminating the whole noise.
5. I've tried running a ground wire attached to the head unit to the chassis but no effect.
6. No dash cam. No DAB. No reversing cam (yet).
7. I have a 4g dongle in the glovebox providing wifi but the static is there whether this is on or off.
8. Unplugging the radio aerial doesn't have an effect.
9. Unplugging GPS aerial doesn't have an effect.
Any further suggestions? And is this a faulty unit OR is this likely to happen even if I get a replacement?

heddyheddy said:
Installed the Erisin ES7915v in a 2009 Skoda Superb a few days ago. PX5 running Android 9.0.
Install was fine and things are working well except for a constant static that appears whenever the volume is above zero. The static does not change volume but it's easily noticeable at lower volumes especially on e.g. non-music radio. There was no static at all on the previous setup (the factory fitted Skoda Columbus / RNS 510). Turn volume to zero and static disappears.
The car has an amp under the passenger seat (factory fitted again). It doesn't use RCA cables - just standard speaker wire cables from the wiring harness in the head unit down to the amp and then out to the speakers. The head unit has the option of using RCA cables.
So:
1. I've altered gain up to -15 and it doesn't have any overall effect.
2. While the static volume doesn't change, the pitch can do so with acceleration etc.
3. It's not related to the screen or the button colours - I've altered those / turned screen off but it has zero effect.
4. I can use the software amp to bring down treble frequencies which helps lower the static but that's not ideal and doesn't come close to eliminating the whole noise.
5. I've tried running a ground wire attached to the head unit to the chassis but no effect.
6. No dash cam. No DAB. No reversing cam (yet).
7. I have a 4g dongle in the glovebox providing wifi but the static is there whether this is on or off.
8. Unplugging the radio aerial doesn't have an effect.
9. Unplugging GPS aerial doesn't have an effect.
Any further suggestions? And is this a faulty unit OR is this likely to happen even if I get a replacement?
Click to expand...
Click to collapse
What did the reseller suggest to resolve the issue?

So far the reseller response is " " because they haven't replied to two emails.

heddyheddy said:
So far the reseller response is " " because they haven't replied to two emails.
Click to expand...
Click to collapse
Suggest identifying the actual model of your unit; if it's an MTCD or mtce, there are others complaining of similar issues in the threads that you might want to look for.

marchnz said:
Suggest identifying the actual model of your unit; if it's an MTCD or mtce, there are others complaining of similar issues in the threads that you might want to look for.
Click to expand...
Click to collapse
Thanks. I'll post that later when I am with the car again. I checked through a lot of previous threads and the few solutions that have helped others on occasion were no good for me.

marchnz said:
Suggest identifying the actual model of your unit; if it's an MTCD or mtce(
Click to expand...
Click to collapse
So this is an MTCE unit:
MTCE_LM_V3.12_1
May 16 2019
Model: PX5(1024x600)
CPU: Octa-core Cortex-A53 @ 1.5G
Build number: rk3368-userdebug 9 PQ2A and I can type out the rest if it's important.
So I guess that means it's from LEI_MA Lei Electronics Inc
I have also found that the static is caused by the lights. With headlights / sidelights OFF, there is no static. It *doesn't* appear to be the result of the LCD or the lights of the buttons on the unit (this has been an issue for others). When I turn the headlights off, the static goes immediately but the lights on the unit remain on for half a second - but the static has already ceased.
So with that knowledge, should I move this post or is this the place for MTCE discussion as well?
Any thoughts on how best to tackle the interference from the lights would be appreciated. Thanks!

Hello,
I hope you find solution with the static.
Since i am interested also for this unit, can you tell if everything else works fine?
Does the CANbus fitted directly?
Steering wheel controls works fine?
How much time the unit need to boot?
Thanks

Same unit, same Problem. VW Golf 5 (2008).
I could solve the problem. The radio antenna is not connected and it is gone. Likewise with only one antenna connected (double fakra), it is gone. Radio still works.

Rear camera trajectory not working

Hi,
I have a working rear camera with embedded ruler, but I want the ruler (or a software one) moves when I move the steering wheel. I've already enabled something about it in car settings but it doesn't work... Am I missing something? Is there a cable I didn't connected?
Thanks

What car?

anhquansei said:
What car?
Click to expand...
Click to collapse
Mini one

maicol07 said:
Mini one
Click to expand...
Click to collapse
Do you have a canbus? Most likely the headunit doesnt support it and it will never work.

anhquansei said:
Do you have a canbus? Most likely the headunit doesnt support it and it will never work.
Click to expand...
Click to collapse
Do you mean the option in the factory settings? If yes, I have it selected to the right value

maicol07 said:
Do you mean the option in the factory settings? If yes, I have it selected to the right value
Click to expand...
Click to collapse
The car has steering angle sensor that either feed the information through the canbus to the head unit which will display the curved ruler OR it will send the ruler it self and the headunit will impose that image on. As far as i know the android head unit does not have this curved ruler feature so you are SOL. Buy a kenwood one they have that feature.

maicol07 said:
Hi,
I have a working rear camera with embedded ruler, but I want the ruler (or a software one) moves when I move the steering wheel. I've already enabled something about it in car settings but it doesn't work... Am I missing something? Is there a cable I didn't connected?
Thanks
Click to expand...
Click to collapse
Is the unit an MTCD/E?

marchnz said:
Is the unit an MTCD/E?
Click to expand...
Click to collapse
Yes (MTCD)

anhquansei said:
The car has steering angle sensor that either feed the information through the canbus to the head unit which will display the curved ruler OR it will send the ruler it self and the headunit will impose that image on. As far as i know the android head unit does not have this curved ruler feature so you are SOL. Buy a kenwood one they have that feature.
Click to expand...
Click to collapse
Actually some of the android units do have this feature, I have an Xtrons unit PBX80JCCL specific for Chevy vehicle which does this on my work van (2012 Chevy Express), and I hadn't even thought it would work or could work since it was a base model van. You would have to have the correct canbus setup and just enable it on factory settings. If you ordered a vehicle specific head unit it's more likely to work, but I'm sure there's a way to make it work if your vehicle and canbus setup supports it. A Kenwood unit is not going to work any better if the vehicle and canbus don't support it. OP would need to provide more info like if the unit came with canbus adapter and if any level model of the vehicle offers the dynamic backup lines from factory (usually if a higher model has it the lower model still has it in bcm, they just add needed modules when upgrading and activate it via flash). If they already have canbus adapter connected correctly then the lines won't work on any radio they put in since it's likely not a feature the car has.

Question Stock replacement nav for Vitara

Hi,
I'm looking for new android device as replacement for my Bosch stock nav in Suzuki Vitara 2018 GLX. I'm looking at Teyes CC3 or Mekede M500S. I do have few prerequisites
must have options
- compatibility with stock rear camera
- compatibility with steering wheel commands
- compatibility with stock microphone
- compatibility with stock USB ports
nice to have options
- compatibility with stock GPS module (maybe by using FAKRA adapter?)
So far all info I got for M500S is that it cannot use stock rear camera. Is it true? Can it be done with some adapters?
Thank you.

Racker_CRO said:
Hi,
I'm looking for new android device as replacement for my Bosch stock nav in Suzuki Vitara 2018 GLX. I'm looking at Teyes CC3 or Mekede M500S. I do have few prerequisites
must have options
- compatibility with stock rear camera
- compatibility with steering wheel commands
- compatibility with stock microphone
- compatibility with stock USB ports
nice to have options
- compatibility with stock GPS module (maybe by using FAKRA adapter?)
So far all info I got for M500S is that it cannot use stock rear camera. Is it true? Can it be done with some adapters?
Thank you.
Click to expand...
Click to collapse
My Mekede M500s does all 4 of those (oem mic, usb, swc and oem reverse camera on my Kia Sportage.
It just depends on your cars camera, and whether the reseller supplies the necessary adapters.
For example with my car I had to add 2 terminals to the wiring Mekede sent me in order to get the oem mic working.
The head unit was capable of all 4 options you want but the wiring sent to me only supported 3 of the 4.
Look in to your cars camera, what format the video is, what connector it uses, and see if you can find a seller offering a cable to connect the camera just in case 1 doesn't come with the unit.

j0hn83 said:
My Mekede M500s does all 4 of those (oem mic, usb, swc and oem reverse camera on my Kia Sportage.
It just depends on your cars camera, and whether the reseller supplies the necessary adapters.
For example with my car I had to add 2 terminals to the wiring Mekede sent me in order to get the oem mic working.
The head unit was capable of all 4 options you want but the wiring sent to me only supported 3 of the 4.
Look in to your cars camera, what format the video is, what connector it uses, and see if you can find a seller offering a cable to connect the camera just in case 1 doesn't come with the unit.
Click to expand...
Click to collapse
Thank you. I decided to go with Mekede and I bought adapter cable for rev camera. It should all arrive in 2 weeks so I will know than if that was a good choice .

Today I got my stock radio out so I can note all connectors and maybe map them with M500S ones.
Here is a picture of stock Vitara Bosch head unit with description for each connector
GPS - you need FAKRA to SMA adapter
ANT - provided with M500S radio
DAB - you need to buy USB DAB device and FAKRA to SMA adapter (antenna you get with USB radio is not needed)
AUX - not used
MIC - this will be an issue since M500S doesn't have any connector for using stock mic in roof
CAM - you need extra adapter so you can use your stock camera with M500S
USB - compatible with M500S connector + you will get 2 extra USB connectors you can use
H BRAKE - not used on M500S, on stock one you need it to set up AA or mirrorlink
ISO/MAIN - speakers, power, etc.
So only one issue remains and that is how to use stock mics. This is all theoretical for now because I'm still waiting for unit and adapters.
Br.

So device came and of course there are issues.
- USB OEM cable is NOT compatible with M500S port for one USB
- I cant get reverse camera to work. I even bought THIS cable but any way I connect it it doesn't work as it should. I either have revers picture all the time or I don't have it at all.
If anyone can help with camera I would appreciate it. M500S reverse cable has 3 wires labeled "IR", "BRAKE" and "12V CAMERA". Main ISO plug has one purple labeled "BACK". If I connect purple, red and blue from adapter I have picture from camera all the time (shift in any position, neutral, drive, reverese). If I connect only red and purple same thing but with black screen and guidelines.

Racker_CRO said:
So device came and of course there are issues.
- USB OEM cable is NOT compatible with M500S port for one USB
- I cant get reverse camera to work. I even bought THIS cable but any way I connect it it doesn't work as it should. I either have revers picture all the time or I don't have it at all.
If anyone can help with camera I would appreciate it. M500S reverse cable has 3 wires labeled "IR", "BRAKE" and "12V CAMERA". Main ISO plug has one purple labeled "BACK". If I connect purple, red and blue from adapter I have picture from camera all the time (shift in any position, neutral, drive, reverese). If I connect only red and purple same thing but with black screen and guidelines.
Click to expand...
Click to collapse
The camera should be fairly simple to fault find but the wiring depends on whether you are using a canbus or not.
Answer that and someone will help with connecting the camera properly.

No canbus is used nor it is need for Vitara as I was told.
I'm guessing purple REV wire should get power once I put it in reverse and switch screen to backup camera. I measured voltage on blue wire from adapter and there is no voltage while in reverse.

Solved it! Reverse signal 12V was coming from HANDBRAKE connector. I added extra wire from that pin to purple and blue wires and everthing works.

Racker_CRO said:
So device came and of course there are issues.
- USB OEM cable is NOT compatible with M500S port for one USB
Click to expand...
Click to collapse
Is this what you're looking for?

j0hn83 said:
Is this what you're looking for?
Click to expand...
Click to collapse
YES! Thank you

Cable arrived and works like a charm. So far I managed to get almost all parts in Vitara to work with Mekede unit except external OEM mic. It will take some testing and soldering.

Question Mekede M700S RCA Outputs + Other Stuff

Good afternoon,
Recently bought a non-brand headunit from Amazon seller "Biorunn".
I received my unit and it works well. Seller confirmed it is a Mekede M700S.
I ran into an issue when trying to setup the RCA connections.
They provide 2 harnesses - 1 with "Right" and "Left" out. Yes, just generic left and right.
1 with "Rear Right" and "Rear Left".
The issue is that, the harness with right and left channels (same harness with 4G Sim Tray) connects fine, but there no where to connect my rear channel harness.
Am i missing something here? Am i supposed to use an RCA splitter for Front and Rear differentiation?
Then,
I installed Fake Device Test. To no surprise, it has faked the Android version, and possibly the RAM too?
I bought the 8GB/128GB model. Both the system and Device Test come back with 8GB recognized and installed, but only 6GB is usable. What's going on with the other 2GB? I know Android uses at most 500MB so that leaves 1.5GB unaccessable? That doesn't sound right to me. Also, the UIS7862 only supports up to 6GB, soooooo Scam?
I updated the firmware to Mariodantas's mod. That seemed to get the CANBus and steering wheel controls to work. Haven't tested TPMS yet but i would assume it works since SW controls, rear camera works. Also, unsure about the Mic.... will that work too or do i need to install the provided one.
As stated, this was purchased thru Amazon so i do have some buyer protection, but must act quick as i received the unit yesterday.
Thats all for now. Thank you in advance!

> Am i missing something here? Am i supposed to use an RCA splitter for Front and Rear differentiation?
depends on the vehicle-specific harness included with the unit. I've found that on many of them, they only provide a single set of RCA connections for both front/rear, having loops between the pins. What vehicle are you using this with? What's the harness look like? Does your car use an external amp to power some or all of the speakers? If not, you don't need to connect the RCAs at all.
> Also, the UIS7862 only supports up to 6GB, soooooo Scam?
RAM physically installed and usable by the SoC are two different things. Your unit has 8GB installed, 6GB of which is usable by the SoC.
> I updated the firmware to Mariodantas's mod. That seemed to get the CANBus and steering wheel controls to work.
would have no effect, CANBUS vehicle and box type must be selected properly in factory settings for steering wheel controls and other CAN-related items to work. Changing the kernel alone would not affect these functions