BMW E38 PX5 I-BUS TV Button - MTCD Android Head Units Q&A

Hello all!
i have small question. Is there any chance to use back TV button with android radio PX5 (with i-bus)?

Related

Using the HU to update the instrument panel clock

Hi All,
What is the best way to update the CANBUS clock on my car's instrument panel?
The clock on my instrument panel is apparently controlled by the head unit over the CANBUS. Now that I have an Xtrons PX5 MTCE GS unit head unit, the clock on the dash board just stays at 12:00pm. I drive a Ford Mondeo MK4.
My old PX3 Eonon unit could send radio station data to the instrument panel, but the new Xtrons one sends nothing.
I was thinking of a USB->CANBUS adapter on the head unit and writing an Android script to push the current time to the instrument panel, but wanted to see if anyone's got any better ideas first.
From my limited understanding, the CANBUS adapters supplied with the head units are tied to the MCU's and are solely designed to transfer steering wheel keys - the fact my previous Eonon unit did confuses me..
Many thanks for any input,
Tim

[PX5]Rear parking sensors map

Hello,
I have a DASAITA PX5 running hal9k's ROM and i'd like to know if it's possible to switch the colors of rear parking sensors map. Right now, when i approach something, the red lights up first, then the yellow and when i'm really close it's the green one.
I'd like to be the green first, then yellow and last the red ones
My car is a PEUGEOT 208.
Thank for your help.
How did you connect the sensors to the head unit ?
With the canbus adapter.
What kind of adapter you need ? I am looking to enable this on my Hyundai i30 2014, with PX5 android radio and hal9k 4.1, bur could find the sution anywhere. Could you please explain me what adapter are you talking about ? Many thanks

CAN adapter - Help needed (Mercedes)

Hi All,
I need to find some info for the Can adapter so i can fix my issue and help other people with similar problems too .Owner of an MTCD PX5 unit, specific for Mercedes ML (W164) that came with the Can adapter.
From day one the steer wheel buttons worked (vol up/down, phone) and reverse camera out of the box BUT i had no vehicle info at all (door opened, fuel level, temperature, parking sensors etc) as many of the users especially on VW units have. The car is a 2010 model therefore the canbus info should be plenty. Tried all the combinations of CanBus under the extra settings with no luck.
One think i noticed is that i had NO Vehicle.apk or microntek apk and MTCCanbus.apk installed on the unit. I tried to install but installation was failing for both. Even copying to system/app/** didn't worked.
Any idea ?
BTW Anyone knows what is the Knob Mode under extra settings ? Mine is set to : 2 10k/20K ADC Ports
Details:
Unit: MTCD PX5
MCU: MTCE_GS_V3.00_3
ROM: Halk9 Mod 3.1 (Android 8)
Can Adapter : GS 10280514 / HW:V2 SW:V3
Can adapter Setting: 23 Benz_B200(simple)
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
zollaki said:
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
Click to expand...
Click to collapse
Good to know that this is a generic issue and not specific to my unit and car. It seems a lot of people with Mercedes cars have similar problems. I wonder if this is related with the cheap implementation of the Chinese Can adapters or related with the car.
Will keep searching
Another thread is open with more technical details for similar issue, more HW oriented though here > https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development
I have the same car w164 and px5 android 8
The same problem.
No I have more problems the canbas stop working no reverse camera no Wheel key vol working and no led light on unit key, I think my canbus dead ?

Dasaita head unit hardware buttons

On My Dasaita px6 Max HA2137B head unit
I'd like to bind the BAND button to my DAB+ app instead of the FM radio!
Can anyone please tell me how to do this Please?
Thank's
Patrick

Question Any FYT units that supports TV module??

Hi, I am currently using the MTCD Dasaita PX6 unit which has a TV module that plugs directly into one of the rear connector.
I can use the TV app and a https://xender.vip/ lso switch channels from the touch screen giving it a very integrated experience.
The TV module is only power-on automatically when the TV app is launched thus some power saving there.
Am looking to upgrade to an FYT unit but https://nox.tips/ so far none of them seems to support a TV module. Not looking at RCA in kind where there is no integration and can't switch channels using the touch screen.
Does anyone knows of any?
Hi there, yeah I am in the same boat as you. Currently on Dasaita PX6 and looking to upgrade to a UIS7862 unit for improved performance.
So far it seems no manufacturer has tackle this TV integration issue for the FYT units which is a bummer.
Only solution is via RCA in and switching channels with the supplied remote control

Categories

Resources