Hi, I am currently using the MTCD Dasaita PX6 unit which has a TV module that plugs directly into one of the rear connector.
I can use the TV app and a https://xender.vip/ lso switch channels from the touch screen giving it a very integrated experience.
The TV module is only power-on automatically when the TV app is launched thus some power saving there.
Am looking to upgrade to an FYT unit but https://nox.tips/ so far none of them seems to support a TV module. Not looking at RCA in kind where there is no integration and can't switch channels using the touch screen.
Does anyone knows of any?
Hi there, yeah I am in the same boat as you. Currently on Dasaita PX6 and looking to upgrade to a UIS7862 unit for improved performance.
So far it seems no manufacturer has tackle this TV integration issue for the FYT units which is a bummer.
Only solution is via RCA in and switching channels with the supplied remote control
Related
Any suggestion?
I have Px5 MTCE headunit from Klyde.
Thanks everyone.
almost same question as above. PX5 MTCE Dasaita 10.2 with ISDB -T, the factory tv tuner but not working in my area. i am swapping it with another tuner (working) with the automotive multi pin connector for the power, composite video signal and the UART tx/rx signals. anyone knows the "nuts and bolts" for the protocol?
tagar said:
almost same question as above. PX5 MTCE Dasaita 10.2 with ISDB -T, the factory tv tuner but not working in my area. i am swapping it with another tuner (working) with the automotive multi pin connector for the power, composite video signal and the UART tx/rx signals. anyone knows the "nuts and bolts" for the protocol?
Click to expand...
Click to collapse
What's your Country's DTV standard?
Your factory TV Tuner is built-in or external? Thanks.
tribalfs said:
What's your Country's DTV standard?
Your factory TV Tuner is built-in or external? Thanks.
Click to expand...
Click to collapse
it is ISDB-T for south america, japan, philipines etc. the dasaita tv tuner (external) is for japan market with mini B CAS which i think is the reason it will not pick up the signal. i purchased another tuner that works ( same standard ) and i can tap to the composite video signals for signal display without problem. however, the HU commands to scan/change channels of course does not work even with correct tx/rx pairing of the wires between HU and tuner. someone here had hacked this before?
https://s.click.aliexpress.com/e/c2UwNoZi
Will this work (touchscreen control) with my Klyde PX5 MTCE headunit?
Can't find Klyde branded one.
Any idea? Thanks
tribalfs said:
https://s.click.aliexpress.com/e/c2UwNoZi
Will this work (touchscreen control) with my Klyde PX5 MTCE headunit?
Can't find Klyde branded one.
Any idea? Thanks
Click to expand...
Click to collapse
Don't think they make their own. Most if not all hu manufacturers buy from the vendors and slap on their company logos
Sent from my Pixel 3 using Tapatalk
SilentO said:
Don't think they make their own. Most if not all hu manufacturers buy from the vendors and slap on their company logos
Sent from my Pixel 3 using Tapatalk
Click to expand...
Click to collapse
So will it work or not?
Hi All,
I need to find some info for the Can adapter so i can fix my issue and help other people with similar problems too .Owner of an MTCD PX5 unit, specific for Mercedes ML (W164) that came with the Can adapter.
From day one the steer wheel buttons worked (vol up/down, phone) and reverse camera out of the box BUT i had no vehicle info at all (door opened, fuel level, temperature, parking sensors etc) as many of the users especially on VW units have. The car is a 2010 model therefore the canbus info should be plenty. Tried all the combinations of CanBus under the extra settings with no luck.
One think i noticed is that i had NO Vehicle.apk or microntek apk and MTCCanbus.apk installed on the unit. I tried to install but installation was failing for both. Even copying to system/app/** didn't worked.
Any idea ?
BTW Anyone knows what is the Knob Mode under extra settings ? Mine is set to : 2 10k/20K ADC Ports
Details:
Unit: MTCD PX5
MCU: MTCE_GS_V3.00_3
ROM: Halk9 Mod 3.1 (Android 8)
Can Adapter : GS 10280514 / HW:V2 SW:V3
Can adapter Setting: 23 Benz_B200(simple)
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
zollaki said:
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
Click to expand...
Click to collapse
Good to know that this is a generic issue and not specific to my unit and car. It seems a lot of people with Mercedes cars have similar problems. I wonder if this is related with the cheap implementation of the Chinese Can adapters or related with the car.
Will keep searching
Another thread is open with more technical details for similar issue, more HW oriented though here > https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development
I have the same car w164 and px5 android 8
The same problem.
No I have more problems the canbas stop working no reverse camera no Wheel key vol working and no led light on unit key, I think my canbus dead ?
Hi All,
I am a layman in Android Development or coding. Recently I upgraded the Android Stereo in my car that is sold in India in the name of Woodman ( Its the same config of Joying UIS 7862 4GB RAM/64 GB ROM with Android 10).
I am using Samsung S21 with Exynos processor in India that has Wireless AA support.
Head unit on paper says "Wireless + Wired Apple car play support but only wired for Android Auto".
The stereo has an app called Car Link that has to be opened on head unit screen to work while to connect your phone using USB Cable. It works with USB as mentioned. But I am looking to get the wireless support as well.
Is there a way I can tweak the bluetooth or something in head unit and get wireless AA working?
I did my R&D to get it work but failed. in AA setting I found that under Autolaunch settting it particularly says that head unit bluetooth in does not support auto launch (See the screenshot attached).
Thanks
Deepak
Hello. I am looking for a radio to install in my skoda Rapid and I have doubts regarding these FYT uis7862.
1- Would the parking sensors work acoustically and visually?
2- Could I see the information of open doors, temperature, etc on the screen?
3- Can it be integrated with the car's on-board computer to see the phone or navigation?
4- What can be done with these radios that cannot be done with a Px6 or vice versa?
Do you mean FYT based UIS7862
marchnz said:
Do you mean FYT based UIS7862
Click to expand...
Click to collapse
Yes
1- Visually (someone correct me if I'm wrong)
2- Depends on your car and canbus
3- Depends on your car and canbus
4- Esasy rootable and many mods available !
@albertron The canbus is one of the biggest unknowns. Unless there is someone with the same car model and audio, amplifier and climate control as you, there is no way to know unless you try it yourself. You can ask the reseller, but if they say everything works and then it doesn't, what will you do?
Each manufacturer/reseller of these Android head units has code that works with the canbus modules. They don't share code. Some manufacturers are better than others with the canbus coding. Your experiences with other head units, such as a PX6, are not relevant as the code on the PX6 may or may not be used in these newer models.
As cars electronics change and become more complex or various items are integrated such as climate control through the head unit screen, canbus coding for the manufacturers of these head units becomes more difficult. My car is a 2012 Kia Sorento with an amplifier. The audio from the head unit to the amplifier is the only thing that uses the canbus that is used by my head unit. The canbus module that the reseller provided did not work and I had to purchase an aftermarket interface module. I was lucky that I found it. If I didn't find the interface module, I would have a paperweight that I would try to sell.
So, if those items you mention are important or required for you, I would make sure those functions work for your specific setup before purchasing a head unit...any head unit.
The above is what I've come to believe and based on my experience with my head unit and what I've read on various forums.
@mariodantas @mastrv
Thanks for answering. So it's best to ask the seller. Really the only thing that matters to me is that the parking sensor and the buttons on the steering wheel work, the rest of the things are secondary. I have also seen that most radios do not include the canbus adapter and you have to buy it separately, spending another €30. I'll have to look first for an adapter compatible with my skoda Rapid. Although I still have doubts about whether to take a px6 or a FYT with uis7862. I also have the option of an rcd330, but it has bugs that are too serious for me.
What would you do? My use will be 90% listening to music with tidal, and fm radio. The remaining 10% I will use a GPS navigator to travel.
albertron said:
@mariodantas @mastrv
Really the only thing that matters to me is that the parking sensor and the buttons on the steering wheel work, the rest of the things are secondary. I have also seen that most radios do not include the canbus adapter and you have to buy it separately, spending another €30. I'll have to look first for an adapter compatible with my skoda Rapid. Although I still have doubts about whether to take a px6 or a FYT with uis7862. I also have the option of an rcd330, but it has bugs that are too serious for me.
What would you do? My use will be 90% listening to music with tidal, and fm radio. The remaining 10% I will use a GPS navigator to travel.
Click to expand...
Click to collapse
Your parking sensors will definitely work. If you get the correct canbus decoder you will also have visual parking sensors display on your headunit.
Chances are it will work as VAG group canbus codes are pretty well known. I helepd a friend install a MEKEDE unit in a Golf 5 and, even if this particular model was not a choice in setup, canbus integration worked out of the box.
PX6 units are obsolete, go for a FYT unit.
m00n61 said:
Your parking sensors will definitely work. If you get the correct canbus decoder you will also have visual parking sensors display on your headunit.
Chances are it will work as VAG group canbus codes are pretty well known. I helepd a friend install a MEKEDE unit in a Golf 5 and, even if this particular model was not a choice in setup, canbus integration worked out of the box.
PX6 units are obsolete, go for a FYT unit.
Click to expand...
Click to collapse
OK, thanks. I think I'll buy a medeke or navifly then. First I will ask the seller if it is compatible with my car's canbus. Another question I had that I forgot to ask: 1 year ago I had an Android radio in another vehicle, and the tidal app interface was unusable when in landscape mode. By any chance someone has it installed and can tell me if they have fixed it? The problem was that you can't access the search, or playlist, or anything. Only the music player comes out with the last song you listened to. Tidal is my main music medium, and if it still doesn't work I could consider other radios with original Android auto.
I have a Joying uis7862 based unit. It does or can do all the things you asked. Canbus adapter was included with the wiring harness. Specifically I have the JY-VQ130N4GN in a 2010 VW Passat.
I see that they offer a number of units for the Skoda Octavia. I don't know how similar the dash of the Octavia is to the Rapid.
Hi everyone
I have a facelift 2010 Lexus IS250 F Sport, I've had some large success installing this XTRONS head unit for it and I am largely satisfied with it. I am however having an issue with getting Steering Wheel Controls to work with the head unit.
Lexus | Various | Android 10 | Octa Core | 4GB RAM & 64GB ROM | Integrated 4G Solution | PMA10ISLS
XTRONS PMA10ISLS is a 10.1" large screen car stereo with customized face panel and optimized CANbus Decoding for Lexus. It supports CarAutoPlay, built-in DSP, PIP mode enabled ,Dual Theme, Instant Rear Vision and so on.
xtrons.co.uk
Lexus| Various | ISO Wiring Harness | MOST
This ISO Wiring Harness is compatible with XTRONS custom fit units PSP10ISL,PMA10ISL etc. If your car is Lexus IS250/IS300/IS350 Convertible (2-door)with original navigation or fibre amplfier system,you need this cable to aid for the installation.
xtrons.co.uk
This is the unit I purchased, alongside a special wiring harness so that I could use it with my vehicle as its a facelift Navi.
With the default CANbus setting on my head unit, only Volume control seems to work and the phone call buttons and voice command buttons are mapped to functions like Radio and Hey Google but I cannot programme these on the app. With an alternative CANbus setting I get skip track functionality but I get different AC Controls and lose access to my factory amp settings.
The original wiring harness I got for the headhunt has not been used at all as I was instructed to usr the special harness, and that original harness had a CANBUS decoder. XTRONS claim that I am unable to programme the SWC due to the CANBUS needing to decode it, although I have played around with the settings and selected various different CANBUS settings.
Would anyone be able to advise me on how I can get the SWC working, would it involve plugging the CANbus decoder into the head unit? There is a 12 pin connection spare at the back but I am unsure if that would make the difference or not.