Hi
I have a htc u11.
last week while i was working with my phone suddenly it hanged and i tried to soft reset.
after that phone showed me blackscreen and nothing happened even i connect phone to the charger and charging led not showing and phone cant power on.
i tried a lot of methods with power and volume buttons but they didnt work.
when i connect phone to the pc it shows qusb_bulk driver or qualcomm hs-usb qdloader 9008
What happened and what can i do?
thanks
Related
I have a 16GB XT1034 MotoG that will not turn on. Earlier today I switched from the netflix app to Snapchat. Instead of switching, it said that most of my apps had stopped working. After about 7 of these messages popping up, I turned off my phone and tried to turn it back on. Funny thing is, it won't turn back on :crying:.
When I plug my phone in to my computer via USB, it shows up as "Qualcomm HS-USB QDLoader 9008" in my device manager. I have tried holding the power button for 30sec, 1min, 2min, and I have tried holding the power with volume down for 30sec, 1min, 2min, 5min. I've been reading that it may take up to five minutes, but this doesn't seem to work. I'm confused as to how this could happen without trying to root my phone.
Any ideas on how I can fix this?
Anshrew said:
I'm confused as to how this could happen without trying to root my phone.
Any ideas on how I can fix this?
Click to expand...
Click to collapse
Any device can fail.
Visit warranty, if possible.
Hello OPO-owners.
I need some help. My OPO won't turn on. When i press power nothing happens. When i plug it in it vibrates one time, the screen turns on staying black (only backlight) then the screen turns a bit brighter but still black. Then the screen turns off and it starts from the beginning with one vibrate.
Booting into recovery with power + VolDown -> nothing happens
Booting into fastboot with power + VolUp -> nothing happens
power cycle - holding power 20 sec 5 times like suggested on oneplus HP -> nothing happens
holding power for a minute or more -> nothing happens
what i can do is boot into Qualcomm HS-USB QDloader 9008 by holding VolUp and plug into pc. From there i tried the unbrick method with color.zip. Msm8974downloadtool flashed the first two files then changed divice into HS-USB Diagnostics 9006 as it should and started flashing the partitions. But somehow my OPO keeps disconnecting in that 9006 state every 8-10 seconds so that the flashing keeps starting from beginning. then tried different flash tools found on androidbrick.com and finally managed to get it back to where it was by editing rawprogrammer64.xml to only flash partition table and recovery, rpm, tz, sbl1 and emmc_appsboot.
So now i'm right there where i started.
What came to my mind is, maybe there is something wrong with power button. As holding and pressing seems to do nothing. So when i try to boot into fastboot with power + VolUp and plug it in i end up in QDloader 9008 mode which should normally only happen when you just hold VolUp and plug in. Also something wrong with power button could also be the reason why it kept disconnecting in Diagnostics 9006 mode.
Has anyone ever experienced something similiar?
I'm gonna upload a video to show you what my OPO is doing when i plug into charger or pc.
After charging it for 24 hours I'm still where i started only that the screen is not black anymore but showing some stripes from top to bottom.
i keep on charging.
Hello, i bought a NEXUS 5 off of a guy, who said that he plugged in the charger and went to sleep, at the morning the phone was dead, no reaction etc. I tried pressing power+vol up, nothing happens, power+vol down, nothing happens. Then i plugged it to my PC and when i press power+both volume buttons, the pc recognises a "Quectel QDLoader 9008". When i charge, no lights come up, i tried those power+volume combinations and the screen is not turning on even for a second. Only the thing that i can do is plug to pc and power+both vol to get it recognised as "Quectel QDLoader 9008".
Any help would be appreciated!!!
I just disconnected battery and reconnected it, now it does like that:
I hold power button
windows shows unknown device malfunctioned
nexus 5 screen is black, no signs of life
Seem like Bricked :/
But it can be fixed as far I know with fastboot flashing
Iskander101 said:
Seem like Bricked :/
But it can be fixed as far I know with fastboot flashing
Click to expand...
Click to collapse
I did a thing from yt with boarddiag software and still no reaction
Hi
I have a u11.
last week while i was working with my phone suddenly it hanged and i tried to soft reset.
after that phone showed me blackscreen and nothing happened even i connect phone to the charger and charging led not showing and phone cant power on.
i tried a lot of methods with power and volume buttons but they didnt work.
when i connect phone to the pc it shows qusb_bulk driver or qualcomm hs-usb qdloader 9008
What happened and what can i do?
thanks
same problems
wait for helps
Hi,
I had the exact same problem:
HTC U11 just dropped dead in the middle of a phone call
- Would not turn on again.
- Would not soft-reset (pressing volumeLow + Power button for 10 secs makes the phone vibrate and the screen backlight turn on but the screen remains black).
- Would not charge (screen stays black).
- When connected to a Win10 PC via USB, it is detected as 'qusb_bulk' but no drive is shown
SOLUTION:
I removed the Sim card (not sure if this is even necessary).
Then I opened the phone (see tutorials on youtube etc) and disconnected the battery, then pressed the Power-button (just to make sure the remaining energy is drained). Then reconnect the battery and: it turns on just fine!
cbie said:
Hi,
I had the exact same problem:
HTC U11 just dropped dead in the middle of a phone call
- Would not turn on again.
- Would not soft-reset (pressing volumeLow + Power button for 10 secs makes the phone vibrate and the screen backlight turn on but the screen remains black).
- Would not charge (screen stays black).
- When connected to a Win10 PC via USB, it is detected as 'qusb_bulk' but no drive is shown
SOLUTION:
I removed the Sim card (not sure if this is even necessary).
Then I opened the phone (see tutorials on youtube etc) and disconnected the battery, then pressed the Power-button (just to make sure the remaining energy is drained). Then reconnect the battery and: it turns on just fine!
Click to expand...
Click to collapse
Nothing will happen with this solution, ur problem was different u could just reconnect the battery and ur issue would have been fixed
This started happening to me after changing a broken display. I get the asus logo, then the android one, then Qualcomm crashdump for less than a second then it repeats a few loops then shuts down.
I can put the device into fastboot mode by holding volume up + power but plugging a cable into it makes the screen flash and shut down and it does not get recognised by the PC. It also makes the phone heat up if left connected for a long time.
I tried making an EDL cable and putting the phone into EDL mode, but even that doesn't seem to work and the phone still isn't recognised.
When the phone is connected with a usb cable, no button combination will make it wake up.
Please help!
AfterGlows said:
This started happening to me after changing a broken display. I get the asus logo, then the android one, then Qualcomm crashdump for less than a second then it repeats a few loops then shuts down.
I can put the device into fastboot mode by holding volume up + power but plugging a cable into it makes the screen flash and shut down and it does not get recognised by the PC. It also makes the phone heat up if left connected for a long time.
I tried making an EDL cable and putting the phone into EDL mode, but even that doesn't seem to work and the phone still isn't recognised.
When the phone is connected with a usb cable, no button combination will make it wake up.
Please help!
Click to expand...
Click to collapse
did you manage to find any solution? I have the same phone and I just changed the display and I didn't know what was happening????