Hello OPO-owners.
I need some help. My OPO won't turn on. When i press power nothing happens. When i plug it in it vibrates one time, the screen turns on staying black (only backlight) then the screen turns a bit brighter but still black. Then the screen turns off and it starts from the beginning with one vibrate.
Booting into recovery with power + VolDown -> nothing happens
Booting into fastboot with power + VolUp -> nothing happens
power cycle - holding power 20 sec 5 times like suggested on oneplus HP -> nothing happens
holding power for a minute or more -> nothing happens
what i can do is boot into Qualcomm HS-USB QDloader 9008 by holding VolUp and plug into pc. From there i tried the unbrick method with color.zip. Msm8974downloadtool flashed the first two files then changed divice into HS-USB Diagnostics 9006 as it should and started flashing the partitions. But somehow my OPO keeps disconnecting in that 9006 state every 8-10 seconds so that the flashing keeps starting from beginning. then tried different flash tools found on androidbrick.com and finally managed to get it back to where it was by editing rawprogrammer64.xml to only flash partition table and recovery, rpm, tz, sbl1 and emmc_appsboot.
So now i'm right there where i started.
What came to my mind is, maybe there is something wrong with power button. As holding and pressing seems to do nothing. So when i try to boot into fastboot with power + VolUp and plug it in i end up in QDloader 9008 mode which should normally only happen when you just hold VolUp and plug in. Also something wrong with power button could also be the reason why it kept disconnecting in Diagnostics 9006 mode.
Has anyone ever experienced something similiar?
I'm gonna upload a video to show you what my OPO is doing when i plug into charger or pc.
After charging it for 24 hours I'm still where i started only that the screen is not black anymore but showing some stripes from top to bottom.
i keep on charging.
Related
I've got a XT1032 with CM11. I already tried other Roms. I cant charge the Phone inAndroid or TWRP. Only in bootloader. Fastboot works, too.
I tried different charger. ADB or phone connection doesnt work.
Anyone an idea.?
EDIT: Also charges, when off
Nearly same situation was on my Moto G yesterday.
But with one difference, mine is stock.
It was charging but when i tried to power up, moto boot logo was appearing, globe was spinning but at the 3rd image (something like train or farm plant) it was giving up and screen turning black, and this loop kept on until battery completely discharged.
I hold the vol down then pressed power button and kept holding them about 10 seconds and released both of them.
Fastboot menu showed up, i scrolled down to recovery with vol down button and selected with vol up button.
A few seconds later an android robot showed up with an exclamation mark in its stomach.
And i pressed and holded vol up button about 10 seconds then while holding vol up button pressed power button once (still holding vol up) and recovery options showed.
I selected factory reset option and rebooted the phone.
It booted normally and running fine now.
Maybe this methode work for you too,
Good luck bro.
Doesn't work for me. Flashed it several times with different ROMS and Kernels. No change. I would say the USB Port is defect, but why can I use Fastboot and charge the phone in fastboot mode or when it is turned off.
Hi I need help urgently. I wanted to boot my phone into recovery mode so i after i switched the phone off, i pressed the power button + volume up. My phone was connected to pc all along. problem is, i removed both my fingers off the power and volume up the moment i saw the "OPPO" boot logo, and realizing that the screen is blank, i removed the power cable connecting my phone to the pc. Now, my r7f refuses to boot.
Weird thing is when i connect my phone to the pc, sometimes the pc recognizes an unknown device thats "malfunctioned". This is called 'bricked'? How do i solve this?
I cant even switch on my phone or remove the battery due to its built-in battery. had 70+% battery at the point of occurence.
My R7f goes into the fastboot mode when i hold the power and volume+ . I usually enter to the recovery mode by holding the power and volume -
You have to hold the buttons for more than 2-3 seconds even the boot logo is shown keep holding them.
Hello, i bought a NEXUS 5 off of a guy, who said that he plugged in the charger and went to sleep, at the morning the phone was dead, no reaction etc. I tried pressing power+vol up, nothing happens, power+vol down, nothing happens. Then i plugged it to my PC and when i press power+both volume buttons, the pc recognises a "Quectel QDLoader 9008". When i charge, no lights come up, i tried those power+volume combinations and the screen is not turning on even for a second. Only the thing that i can do is plug to pc and power+both vol to get it recognised as "Quectel QDLoader 9008".
Any help would be appreciated!!!
I just disconnected battery and reconnected it, now it does like that:
I hold power button
windows shows unknown device malfunctioned
nexus 5 screen is black, no signs of life
Seem like Bricked :/
But it can be fixed as far I know with fastboot flashing
Iskander101 said:
Seem like Bricked :/
But it can be fixed as far I know with fastboot flashing
Click to expand...
Click to collapse
I did a thing from yt with boarddiag software and still no reaction
D2206. Got into a bootloop (the phone only shows the Sony and Xperia logo but ain't starting the system and just restarting forever doing it again and again). Can't get into Fastboot mode because volume buttons and power button isn't reacting at all. The only solution to force it to show some traces of life is plug him to PC or to a charging device but nothing happens except the charging lightning animation appears. And after connecting to PC, it seems like Flashtool recognize him, but nothing can be done because of the periodic 5-7 second interval disconnects.
Any solutions or tips?
You need to power off before connecting. Here's how.
I don't know if you figured this out or still need the help now, but I'm answering because it's the one thing here that I do know the answer to.
From your description, it sounds like you are trying to connect your phone to PC while the phone is still in boot loop. This will not work. You need to power it off first. Since your power and volume buttons won't respond during boot loop, you will need to use the hardware override that is provided.
Under the back panel of your phone, between the SIM2 and microSD slots, you will see a small punch-hole about 2 mm in diameter and labelled "OFF." Use a pen or precision screwdriver to gently press the off switch located inside this punch-hole for about 1 sec. Phone should switch off.
Wait about 15 sec before connecting to PC in Flash (Vol Up pressed down) or Fastboot (Vol Down pressed down) mode until the LED flashes the respective colour and then you can follow whatever instructions you are following.
This started happening to me after changing a broken display. I get the asus logo, then the android one, then Qualcomm crashdump for less than a second then it repeats a few loops then shuts down.
I can put the device into fastboot mode by holding volume up + power but plugging a cable into it makes the screen flash and shut down and it does not get recognised by the PC. It also makes the phone heat up if left connected for a long time.
I tried making an EDL cable and putting the phone into EDL mode, but even that doesn't seem to work and the phone still isn't recognised.
When the phone is connected with a usb cable, no button combination will make it wake up.
Please help!
AfterGlows said:
This started happening to me after changing a broken display. I get the asus logo, then the android one, then Qualcomm crashdump for less than a second then it repeats a few loops then shuts down.
I can put the device into fastboot mode by holding volume up + power but plugging a cable into it makes the screen flash and shut down and it does not get recognised by the PC. It also makes the phone heat up if left connected for a long time.
I tried making an EDL cable and putting the phone into EDL mode, but even that doesn't seem to work and the phone still isn't recognised.
When the phone is connected with a usb cable, no button combination will make it wake up.
Please help!
Click to expand...
Click to collapse
did you manage to find any solution? I have the same phone and I just changed the display and I didn't know what was happening????