Database Info

[How To]Active Sync via Bluetooth

Hi
I just finished figuring out, how to set up a connection to ActiveSync (AS) via Bluetooth. Thought I spread the word...
I’m German, so are my screenshots
If there are major flaws in my translation, let me know!
Tested multiple times on 2 Computers. Works fine for me...
Abstract:
1) set up a partnership
2) Add a new serial BT connection
3) Enable the new serial BT connection
4) Configure ActiveSync
5) Switch on BT on your mobile
6) Search for device and pair
7) Mobile BT config
1) Very important: You have to connect via cable (USB) first in order for AS to set up a partnership!
2) On your PC, open the advanced BT configuration. You do this by right-klicking on the BT symbol in the tray (1). Go to local services and add a new serial bluetooth connection (3) (a ComPort).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can make sure, the ComPort has been added by opening your Device Manager and checking, if the approproate Port shows upt under connections:
3)Now go to "My Devices" (1) by double clicking the BT try icon:
Double click on "My Devices" and look for the serial BT connection. Right click and choose "enable"
continued in post #2 !!!

4) Set up AS to use the established Com Port: Open AS on your Computer, got to Connection settings and enable “connect to this por” and choose the appropriate Com Port:
[/URL]
5) Enable BT on your device:
6) Now go back here and search for BT Devices (2):
Right click on the device which you want to use for ActiveSync, and choose "pairing":
continued in post #3 !!!

A window pops up, asking for a password, use 4 or so characters and hit OK:
Over to your mobile:
A message comes up asking whether you want your PC to connect or not. Of course, you want to!
And then you have to type in the former set password:
Now very impotant: Right after you typed in the password and hit ok, go to your PC and CKLICK ON THE BT-ICON in the try (2)! A Message pops up asking if the device is allowed to use the previously set up BT serial connection. Tick "always" (1) ! And confirm:
continued in post #4 !!!

7) On your mobile, check "active sync" on the device options:
10) Open AS and connect to your PC via BT!
Thats it! Hope this helps someone out there..
AO
PS limiting of pics and BB code sucks for HowTos!

how can i delete unnecessary Com Ports from my device manager?
Every time I delete them and hit refresh, they come right back!
thx
AO

1) Very important: You have to connect via cable (USB) first in order for AS to set up a partnership!
Click to expand...
Click to collapse
Obsolete.
Anyway, here is my very simple 3 step formula for establishing ActiveSync connection via bluetooth on WIDCOMM Bluetooth (the way I do it).
1) Add a bluetooth com port (rt-click bluetooth icon -> Advance config -> local services -> com port). Remember the com port number.
2) Goto ActiveSync -> File -> Connection settings. Check all the check boxes and select the same com port you selected in step # 1.
3) Pair your device with your PC. Now it will show the "ActiveSync" service when the pairing is completed in the services found on the paired device list.
4) Goto ActiveSync on your Device -> Menu -> Connect Via bluetooth.
End of the story.
If you face any problem, your PC or PPC is not working. Hardreset them. Trust me, it'll work!

Share your pc internet connection on your phone via adhoc network - win7

so many hours searching for a solution to make adhoc work on my android and i couldnt find anything where i could get it to work without any code modifications .
what do u need
1. rooted android phone - for me it is t mobile g2x
2.android app called "zt180-adhoc switcher" - available free on android market - download and install
3. 5 minutes of your valuable time - thats all
Steps to get it working
1. install the app mentioned above- "zt180 adhoc switcher"
2. open it and click on " Try to switch to ad-hoc mode just to try"
3. in the Wifi Information dialog the status will be " Connected to android tether network"
4.on your pc open " Control Panel -> Network and internet -> Network Connections"
5. right click on Local area network -> Properties --> Choose sharing tab --> Select -Allow other network users to connect through this computer's internet connection
Leave the other option deselected .
6.The status of Local area network will now change to Network , Shared .
7.open your Wireless networks in your pc - there will be a new wireless network available called = Android Tether .
8. connect to it .
9.voila - magic - thats all u need to do
now open anything on your android device - Working internet
---------- Post added at 03:49 PM ---------- Previous post was at 03:42 PM ----------
trying to post images , as i am a new user so the board doesn allow me , tryin to post it as soon as possible
---------- Post added at 04:01 PM ---------- Previous post was at 03:49 PM ----------
please reply your queries and questions , thanks

with screenshots
Steps to get it working
1. install the app mentioned above- "zt180 adhoc switcher"
2. open it and click on " Try to switch to ad-hoc mode just to try"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. in the Wifi Information dialog the status will be " Connected to android tether network"
4.on your pc open " Control Panel -> Network and internet -> Network Connections"
5. right click on Local area network -> Properties --> Choose sharing tab --> Select -Allow other network users to connect through this computer's internet connection
Leave the other option deselected .
6.The status of Local area network will now change to Network , Shared .
7.open your Wireless networks in your pc - there will be a new wireless network available called = Android Tether .
8. connect to it .
9.voila - magic - thats all u need to do
here u go - your computer,s internet connection shared on your phone

Thank you for the tip but I don't understand...
1. Why wouldn't I connect my Android to the Ad hoc network created on a second network adapter on my PC (in my case a second wifi adapter)?
2. On my PC, no "Android Tether" shows up in my wifi list. On my G2x, "Android Tether" shows up as Not in Range, along with Use_ZT180_Adhoc_Switcher, and Warning_Adhoc_Mode. (I also have a guy transmitting AndroidAP5070 but I think it's someone next door.) There is no change to the status information icons.
3. Is my phone possessed??? It is browsing Internet sites while Data is disabled but not in Airplane mode, and connecting to Wifi while in Airplane mode. Maybe this is affecting my results with ZT-180?
Thanks again.

for the ones that this is working for. Please give Rom/Kernal info. Thanks

disconnect by it self
after zt show (connected) it disconnect by it self
os win XP
kernel :2.6.32.9-perf
thx any way
this thread is the closest thing i saw to solve ad-hoc problem
could it be that we should set static ip
or gate way
like this
http://forum.xda-developers.com/showthread.php?t=1170232

[D5503] Ethernet for Xperia Z1 Compact

I am currently using a 'noname' 10/100Mbit Ethernet USB adapter to provide Ethernet access to my Sony Xperia Z1 Compact (D5503).
The adapter I have only provides approx 2Mbits when used directly connected to a D5503
If I connect the Ethernet adapter to a powered USB hub and then connect the D5503 to the USB hub, I can obtain approx 6Mbits.
I have tested the USB 10/100Mbit adapter on a Win8.1 PC and get the same 6Mbits on this 'noname' model.
This seems quite slow for a 10/100Mbit Ethernet Adapter, even considering a 480Mbit limit of USB2.0
What are other people using in the way of 10/100Mbit Ethernet adapters and what speed can be obtained.

How did you test the true speed?

nurunet said:
How did you test the true speed?
Click to expand...
Click to collapse
I use Google Play FTP Server and get/put a binary file to/from my 1Gbit LAN NAS(QNAP TS-253 Pro with 8GB memory and 7200rpm WD Red drives) and/or Speedtest.net where my normal ISP speed would be a constant 12Mbits to the local ISP Speedtest server.
Speedtest.net is no good for me over 12Mbits.. obviously.
The above ~results are just done via Speedtest.net as any meaningful speed/bandwidth speed at 1-2Mbits is mind numbingly painful..slow.....
Because you asked the question, I did a 6Mbyte file download/upload approx 1.23Mbits download/write and approx 3.9Mbits upload/read from Xperia Z1 compact using ftp where the Ethernet adapter was plugged directly into the Z1C (just a node on the LAN).
[/share/Public] # ftp lbp330-et.lan 2221
230 User logged in, proceed.
Remote system type is UNIX.
ftp> bin
200 Command TYPE okay.
ftp> put fz6.exe
local: fz6.exe remote: fz6.exe
200 Command PORT okay.
150 File status okay; about to open data connection.
226 Transfer complete.
6004615 bytes sent in 37.93 secs (154.6 kB/s)
ftp> get fz6.exe
local: fz6.exe remote: fz6.exe
200 Command PORT okay.
150 File status okay; about to open data connection.
226 Transfer complete.
6004615 bytes received in 11.99 secs (489.1 kB/s)
ftp> put fz6.exe
local: fz6.exe remote: fz6.exe
200 Command PORT okay.
150 File status okay; about to open data connection.
226 Transfer complete.
6004615 bytes sent in 37.70 secs (155.5 kB/s)
ftp> get fz6.exe
local: fz6.exe remote: fz6.exe
200 Command PORT okay.
150 File status okay; about to open data connection.
226 Transfer complete.
6004615 bytes received in 12.02 secs (488.0 kB/s)
ftp>

Xperia Z1 Comact Ethernet via powered USB hub.
Model: Xperia Z1 Compact
Android Version: 5.1.1
Firmware: Stock Sony with Locked Bootloader.
Ethernet down: ~6.5Mbits/sec
Ethernet up: ~1Mbits/sec (restricted by ADSL2 upload speed)
If you connect a supported USB/Ethernet adapter to a powered USB hub, you do get some improvement in Ethernet throughput.
It's still not fast, but you can do 'stuff' with ~6.5Mbits/sec
The Upload speed may be faster as I'm using a 12Mbit down /1Mbit up ADSL2 Internet connection.
Really just checking that Ethernet was still supported using Stock Sony Android 5.1.1 on the Z1C.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have a D5503 too. Can u provide me a rom capable in ethernet?
I have a D5503 too.
Can u provide me a rom stock capable in ethernet to flash in twrp?
Thank you very much.

[APP] NetX - Network Discovery Tools

Hello,
I would like to introduce my application.
https://play.google.com/store/apps/details?id=com.tools.netgel.netx&hl
Network scan: discovers all devices connected at the network.
Displays most important information for each device connected, IP Address, MAC Address, Vendor, Bonjour Name, NetBIOS Name and Domain.
Wake On LAN (WOL): switch on a remote device from your phone or tablet when you are connected via wifi or with a mobile data connection.
Secure SHell (SSH): put a remote device in stand-by or shutdown from your phone or tablet when you are connected via wifi or with a mobile data connection.
Displays the operative system version installed on the remote device. (In the remote device must be installed and started a SSH server)
Loads off-line all devices of a network previously detected.
Adds a new network or a new device manually in order to manage all functionality for a no detected device.
Shows information about the wifi connection (external IP, signal strength, download and upload speed, subnetmask, gateway, DNS).
Shows information about the mobile provider (external IP, signal strength, download and upload speed, CID, LAC, MCC, MNC).
Wifi scan: find nearby wifi and displays SSID, signal strength, channel, encryption.
Shows graphically the band width and the overlapping between channels of wifi networks.
Themes available.
Available languages: English, Italian, German and Russian.
For questions or problems please conctact me.
Thanks.

NetX - Network Discovery Tools

Download link plz… thanks

If I add a link I cannot submit the post because I receive an error

I understand because I cannot paste the link. Because I'm a new user. You can search in google play NetX - Network Discovery Tools and you'll find the app.
Thanks

New version available.
Version 1.2.0.0
- Changed navigation drawer graphics and the network list position
- Changed menu management

if someone has used my app, any advice is welcome.
Thanks a lot

I'm inserting the possibility to see the hardware details about remote network devices.
In the coming days a new release.

Version 1.3.0.0
- Ability to zoom the graphic channels of wireless networks detected
- Added monitoring and diagnostic of remote devices (CPU usage, RAM usage and display of free memory disks).
It's necessary SSH server installed on the remote device.

Someone has used the ssh functionality?

Version 1.3.3.0
- Display the battery percentage of a remote device.
- Improved graphics part

Version 1.4.0.0
- Added new icons to identify a device
- Added the name of the local device in the connection info page

I'm adding the possibility to monitor the network.
If an unknown device is connected to the network that you are monitoring you receive a notification.
As soon as possible I'll put on the store a new release with this feature and other improvements.

Version 2.0.0.0
Added a background service that monitors access to WiFi networks choices.
It's possible to monitor the access of a new device or a device unregistered (unknown).
When one of these devices is connect to the network a notification is sent.

Version 2.1.0.0
- Added ping functionality
- Added port scanner to scan the most common port

With the new release I add these icons. If someone has some request write me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

NetGEL said:
I'm adding the possibility to monitor the network.
If an unknown device is connected to the network that you are monitoring you receive a notification.
Click to expand...
Click to collapse
now this is interesting, something that makes this app stand out from the rest. ill download it now and will report with my experience with it.
thanks.

K, installed it but:
-where is the new device notification setting?
The ui is great, simple. Some feature suggestions:
-traceroute / ip location
-whois
-current connections / open ports
-dns lookup and resverse lookup
An advance feature suggestion:
-os detection feature from nmap!

woomera said:
K, installed it but:
-where is the new device notification setting?
The ui is great, simple. Some feature suggestions:
-traceroute / ip location
-whois
-current connections / open ports
-dns lookup and resverse lookup
An advance feature suggestion:
-os detection feature from nmap!
Click to expand...
Click to collapse
Thanks for your suggestions. I'll implement these feature in future
About new device notification if you open the settings page you can see "Monitoring Wifi" parameter.
This means that every x seconds the app scans the network and checks if a new device is connected.
In order to monitoring the network you must click on the wifi symbol on the main page.
When you click on the wifi symbol you see a yellow triangle near the symbol, this means that you are monitoring that network

NetGEL said:
Thanks for your suggestions. I'll implement these feature in future
About new device notification if you open the settings page you can see "Monitoring Wifi" parameter.
This means that every x seconds the app scans the network and checks if a new device is connected.
In order to monitoring the network you must click on the wifi symbol on the main page.
When you click on the wifi symbol you see a yellow triangle near the symbol, this means that you are monitoring that network
Click to expand...
Click to collapse
Thanks, no instruction in app about this
Also you could add notification icon option for those who wanna know that the app is running in background, this also helps preventing it from being closed.

LG AccessUSB - WebOS debug/root access

AccessUSB is a hardware key, that allows to activate debug mode, root access, etc.
I successfully reversed its protocol and made my own device. Some features:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Debug menu - root:
=================================================================================
[h] Helps about function of charactor key
[ a][func:0x00000000]: Check AccessUsb
[ c][func:0x00000000]: Channel Up/Down Test
[ d][func:0x00000000]: Show Orginal Debug Menu
[ h][func:0x00000000]: Helps about function of charactor key
[ i][func:0x00000000]: MHP Debugging
[ t][func:0x00000000]: set single core
[ u][func:0x00000000]: Virtual Remocon Key Input Mode
[ x][func:0x00000000]: Exit Debug Mode
=================================================================================
Main menu:
help,? Print this help message
============================================================
md Memory dump
mm Modify memory
mf Memory fill
mmap Map kernel physical memory to user vitrual memory
dsm Disassemble memory
regs Dump current exception registers
num Print number in hex/dec/bin
uptime Print system up time
sload load symbol info
sh enter shell
call Call a function
..........
------ ORG MAIN ----------------------------------------
1 Print Mask Menu
2 S/W Version Info
7 DILE_VT Menu
8 SGL Menu
9 BCAS Menu
10 API_SDec Menu
101 SENC Menu
102 SENC API Menu
103 TV Pipeline Menu
11 API_VDEC Menu
111 VENC Menu
12 VIDEO MW Menu
13 VIDEO DIL Menu
15 Picture Quality MW Menu
16 VIDEO Picture Quality DIL Menu
..........
listen listener AND Subscirbe Debug Menu
kadp LG115X Kadp debug menu
uart1 Control MUX for selecting UART1
cnt Auto-Control RF-Generator or Video-Generator
sd system property interface debug menu
============================================================
exit Exit from ORG MAIN menu
AccessUSB uses RSA-2048 encryption. To get access I replace its key in TV firmware, but still looking for original key. If anyone have original AccessUSB, I can copy that RSA key and make a clone.
Original AccessUSB can have time and/or usage count limitations, clone will be without any limitations. So if you help me with this key I will provide firmware and instructions how to make your own AccessUSB. Contact: PM or lgexplorer [at] tutanota.com.
Also looking any other info about original AccessUSB.

AccessUSB devices are signed individually by LG, and I was told that they are pricy to get even for repair shops.
I was making my own one with a BeagleBone Black and CDC-ACM aswell, but deemed it useless due to the existence of better ways to get root and the signature check (serial.pem) on the device

blala said:
AccessUSB devices are signed individually by LG, and I was told that they are pricy to get even for repair shops.
I was making my own one with a BeagleBone Black and CDC-ACM aswell, but deemed it useless due to the existence of better ways to get root and the signature check (serial.pem) on the device
Click to expand...
Click to collapse
Did you got original AccessUSB or valid RSA key? How repair shops can obtain it?
Root is only one feature, that can be obtained via AccessUSB, also it is official root access method, that will not be "fixed" in updates.

Web OS
LgExplorer said:
Did you got original AccessUSB or valid RSA key? How repair shops can obtain it?
Root is only one feature, that can be obtained via AccessUSB, also it is official root access method, that will not be "fixed" in updates.
Click to expand...
Click to collapse
USB access is sweet but i noticed that LG store has more than one IPTV apps how is that so. But no KODI app or is there a way to convert APK to IPK and install on to WebOS.