hallo. i seek for some help my dudes, because the official joying forum is dead .... well my problem is that when going into option of the unit where you adjust the volume balance from 0-10 for tv,au,radio,ipod,music,bluetoth etc. the adjustement for music and bluetooth that i want to use dont work... 0 or 10 is the same.... the radio and aux works though.... i use the rca output to my amps ..... do you know if this is normal or its a problem? i just recieved the unit and instaled it to my car.... i had a px5 for 2 years and it worked fine ....
Wwiimaniac said:
hallo. i seek for some help my dudes, because the official joying forum is dead .... well my problem is that when going into option of the unit where you adjust the volume balance from 0-10 for tv,au,radio,ipod,music,bluetoth etc. the adjustement for music and bluetooth that i want to use dont work... 0 or 10 is the same.... the radio and aux works though.... i use the rca output to my amps ..... do you know if this is normal or its a problem? i just recieved the unit and instaled it to my car.... i had a px5 for 2 years and it worked fine ....
Click to expand...
Click to collapse
Hi! Same problem. Any solution?
i am trying different settings an find that there is a missiong feature from my older PX5 unit to the new android 10 unit, the navigation sound mode to switch sound in navigation and torque pro app is not there anylonger.
Related
I can`t find a working SDVC app for my PX5 GS unit. It is my second unit because the first has had a fault and was exchanged. On the first unit I used Graser´s Dasaita tool for volume control. On the new unit that isn´t working anymore and also MyMTCService does not recognise the unit as MTCD and so the sound control is not working.
The only thing that is different to the old unit are the connectors. The GPS connector uses now a Fakra plug, but I don´t think that this is a problem since all other GPS apps are working normally.
Neither Malaysk, the original GS ROM nor a HA ROM is working. I've tried also different MCU's.
Here you can see the problem with Grasers Dasaita tool. I am not driving and not changing the volume level: https://youtu.be/aT0asijim5g @Graser maybe you can help me?
Hi All,
I need to find some info for the Can adapter so i can fix my issue and help other people with similar problems too .Owner of an MTCD PX5 unit, specific for Mercedes ML (W164) that came with the Can adapter.
From day one the steer wheel buttons worked (vol up/down, phone) and reverse camera out of the box BUT i had no vehicle info at all (door opened, fuel level, temperature, parking sensors etc) as many of the users especially on VW units have. The car is a 2010 model therefore the canbus info should be plenty. Tried all the combinations of CanBus under the extra settings with no luck.
One think i noticed is that i had NO Vehicle.apk or microntek apk and MTCCanbus.apk installed on the unit. I tried to install but installation was failing for both. Even copying to system/app/** didn't worked.
Any idea ?
BTW Anyone knows what is the Knob Mode under extra settings ? Mine is set to : 2 10k/20K ADC Ports
Details:
Unit: MTCD PX5
MCU: MTCE_GS_V3.00_3
ROM: Halk9 Mod 3.1 (Android 8)
Can Adapter : GS 10280514 / HW:V2 SW:V3
Can adapter Setting: 23 Benz_B200(simple)
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
zollaki said:
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
Click to expand...
Click to collapse
Good to know that this is a generic issue and not specific to my unit and car. It seems a lot of people with Mercedes cars have similar problems. I wonder if this is related with the cheap implementation of the Chinese Can adapters or related with the car.
Will keep searching
Another thread is open with more technical details for similar issue, more HW oriented though here > https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development
I have the same car w164 and px5 android 8
The same problem.
No I have more problems the canbas stop working no reverse camera no Wheel key vol working and no led light on unit key, I think my canbus dead ?
I have a Xtrons Android 10 head unit, and bought (via Amazon) a Carlinkit Carplay Wireless dongle and connected this to my Head Unit. Every thing works fine only when i change volume the Android HUD comes in screen. I have a video of the issue.
https://www.youtube.com/watch?v=-21Rcme0mjU
Is this normal or is there a option which a can change and fix the issue? Does CarPlay dont have a Volume hud it self?
GoGo22 said:
I have a Xtrons Android 10 head unit, and bought (via Amazon) a Carlinkit Carplay Wireless dongle and connected this to my Head Unit. Every thing works fine only when i change volume the Android HUD comes in screen. I have a video of the issue.
https://www.youtube.com/watch?v=-21Rcme0mjU
Is this normal or is there a option which a can change and fix the issue? Does CarPlay dont have a Volume hud it self?
Click to expand...
Click to collapse
Is it an MTCD/E? What does reseller say about issue when contacted for support?
marchnz said:
Is it an MTCD/E? What does reseller say about issue when contacted for support?
Click to expand...
Click to collapse
Yes its a MTCD/E, did reach out to them but still no reply so i was hoping to get an answer here
CarPlay doesn’t have any volume control or HUD. The phone defaults to outputting at full volume and the head unit does the rest.
Good afternoon, someone knows how to improve the audio of bluetooth calls, it's too low, I can't hear the other person no matter how much I turn up the volume on the radio.
Also when I call or they call me it only shows the contact number but not the name. How to fix this or is it?.
I would be interested in the same thing.
For me what my plan is to:
- change volume of BT call in Factory Settings all the way up (already done)
- install an external electret condeser directional microphone (to do that I am still working on an electric module that will give a stable 5V bias voltage to the mic, which I will connect to the headunit external mic.
Other than that, I believe all the rest can be done by firmware update by Teyes. I don't thinks its hardware fault.
ttoton said:
I would be interested in the same thing.
For me what my plan is to:
- change volume of BT call in Factory Settings all the way up (already done)
- install an external electret condeser directional microphone (to do that I am still working on an electric module that will give a stable 5V bias voltage to the mic, which I will connect to the headunit external mic.
Other than that, I believe all the rest can be done by firmware update by Teyes. I don't thinks its hardware fault.
Click to expand...
Click to collapse
but the firmware update is not available yet
remonunez said:
Good afternoon, someone knows how to improve the audio of bluetooth calls, it's too low, I can't hear the other person no matter how much I turn up the volume on the radio.
Also when I call or they call me it only shows the contact number but not the name. How to fix this or is it?.
Click to expand...
Click to collapse
You should also turn up the Bluetooth volume on your phone when it's connected. If that's too low, the Amp on the radio can't push it much either.
remonunez said:
but the firmware update is not available yet
Click to expand...
Click to collapse
Yes, I guess we need to wait and hope that they will change that. Eventually.
Hello everyone l have installed TEYES CC3 in my car they said that the unit is compatible with Android auto l tried several means to connect it to my unit in vain, the Bluetooth bottom of CARKIT on Android auto in mobile phone remain blocked any solution please?
Bas14 said:
Hello everyone l have installed TEYES CC3 in my car they said that the unit is compatible with Android auto l tried several means to connect it to my unit in vain, the Bluetooth bottom of CARKIT on Android auto in mobile phone remain blocked any solution please?
Click to expand...
Click to collapse
There is not actuallized to car play yet.
Just conected on bluetothh
remonunez said:
There is not actuallized to car play yet.
Just conected on bluetothh
Click to expand...
Click to collapse
I am using Android phone not iPhone, thank you for your attention.
Hello can someone tell me how to add password to lock and unlock my TEYES CC3 heat unit please?
Bas14 said:
Hello everyone l have installed TEYES CC3 in my car they said that the unit is compatible with Android auto l tried several means to connect it to my unit in vain, the Bluetooth bottom of CARKIT on Android auto in mobile phone remain blocked any solution please?
Click to expand...
Click to collapse
only wired works. mine only works on USB port 2
JoRastaf said:
only wired works. mine only works on USB port 2
Click to expand...
Click to collapse
Wireless works but you need the apk carkit 2.0 and change wireless settings to 5 ghz in car kit
young0ne said:
How can I make it that the headunit auto connects to my hotspot from my phone. I hate that I have to go to WiFi and click it it makes no sense. My old headunit would connect automatically
Click to expand...
Click to collapse
Ok thanks, where can l get the APK carkit 2.0 please?
young0ne said:
Wireless works but you need the apk carkit 2.0 and change wireless settings to 5 ghz in car kit
Click to expand...
Click to collapse
Hello youngone, where can l get the carkit 2.0 please
young0ne said:
Wireless works but you need the apk carkit 2.0 and change wireless settings to 5 ghz in car kit
Click to expand...
Click to collapse
Are you suggesting that the CC3 supports wireless Android Auto?
NuXeR said:
Are you suggesting that the CC3 supports wireless Android Auto?
Click to expand...
Click to collapse
My CarPlay in CC3 is wireless for my iPhone so yes it’s wireless
Many units support wireless Apple Carplay but NOT wireless Android Auto, only wired.
tRidiot said:
Many units support wireless Apple Carplay but NOT wireless Android Auto, only wired.
Click to expand...
Click to collapse
Correction: They provide an emulated/hack of Carplay and AA - which invariably break with updates.
My CC3 can do wireless Android Auto, tested and confirmed
Hello Khan187, which CC3 did you buy, 3,4, 6GB that support AA wireless and where did you purchase it? if you don't mind. I also, would like to know the audio quality when you are in a phone call. I have a YT7260B and the phone quality is bad, people repeat to themself and sometime they hear me little noisy, I am planning in getting a Teyes CC3. thanks
Hi at all.
I have recently built in a CC3 device.
And I have some questions about hardware and software. Maybe someone can help.
1: why is it, that the screen for air-conditioning, temperature etc. spontaneously pops up and don't dissappear by itself?
2: why is there only beep sounds from the parking distance control and no car symbol with colored waves (green to red)
3: why can't I choose YouTube as music widget, as described in teyes installation videos
4: can I change the widgets at all? New functions like whether forecast or GPS status instead of radio stations
Thanks in advance.
Greets, Sebastian
Hi i have similar problems with a skoda superb 3 2017, i am trying to find a good canbus configuration. Now i can see all car settings, cannot see call log, microphone is low, no graphics and beeps from rear sensors, volum from drive wheel is reversed.
I have tried both with rzc canbus and hi world canbus.
I have installed the aditional mic still same,
If i install the sim i can used only for data,
Please advise if i have to update it or anything to make it better, so far i want to uninstall it and use oem.
Hi Sebytech, I didn't found any solution so far. I am in contact with the support from AU and waiting for an answer. And still waiting for my MOST adapter. Have no sound at all.
But my vol. button is working.
No sound? Can you show me a few pics with what you have? And the settings of the canbus? I personally purchased another adapter and stereo sound inhave fromthe one purchased from au. My volume works from steering wheel is just upside down. Not sure if i need to do mcu update
Sebytech said:
Hi i have similar problems with a skoda superb 3 2017, i am trying to find a good canbus configuration. Now i can see all car settings, cannot see call log, microphone is low, no graphics and beeps from rear sensors, volum from drive wheel is reversed.
Click to expand...
Click to collapse
Volume reverse is a setting: Factory -> Reversal Volume.
Same for reversal previous-next. Factory -> Reversal previous next
And if you have a CC3, why don't you read and watch the instructions and instruction videos: https://cc3.teyes.ru/en/index.html
Sebytech said:
No sound? Can you show me a few pics with what you have? And the settings of the canbus? I personally purchased another adapter and stereo sound inhave fromthe one purchased from au. My volume works from steering wheel is just upside down. Not sure if i need to do mcu update
Click to expand...
Click to collapse
I have no sound, because I have a built in canton sound system and digital amplifier. My quadlock connector has therefore no cables to each respective speaker. The sound is transfered to the amplifier by lightwire. When I ordered the CC3 I didn't know much about this and there was no hint on the order page. Due to a German skoda superb forum, someone told me about the need of an MOST adapter. Teyes has such an adapter in their store. I still waiting for it.
What else I am wondering about, is that the pins in my quadlock adapter is no respectively not the same as in the adapter from Teyes and some pins go nowhere. So I think, some functions are missing from the beginning.
I had a little research but, this last pic looks like a power right ? the harness, everything is the same as i have except that plug, anything else related to the amp ?
surfer63 said:
Volume reverse is a setting: Factory -> Reversal Volume.
Same for reversal previous-next. Factory -> Reversal previous next
And if you have a CC3, why don't you read and watch the instructions and instruction videos: https://cc3.teyes.ru/en/index.html
Click to expand...
Click to collapse
Thank you, i will check that, i have check everything that is on the website, instructions are minimal, not everything is plug and play, any idea how to download the latest software? i have the latest mcu firmware but it always says invalid serial it.
thank you
SchaafBaeh said:
I have no sound, because I have a built in canton sound system and digital amplifier. My quadlock connector has therefore no cables to each respective speaker. The sound is transfered to the amplifier by lightwire. When I ordered the CC3 I didn't know much about this and there was no hint on the order page. Due to a German skoda superb forum, someone told me about the need of an MOST adapter. Teyes has such an adapter in their store. I still waiting for it.
What else I am wondering about, is that the pins in my quadlock adapter is no respectively not the same as in the adapter from Teyes and some pins go nowhere. So I think, some functions are missing from the beginning.
Click to expand...
Click to collapse
apologize, did you meant optical fiber?
Sebytech said:
apologize, did you meant optical fiber?
Click to expand...
Click to collapse
Oh, sorry. Your right. I wasn't so sure about the coorect term to translate it from German to English.
Sebytech said:
I had a little research but, this last pic looks like a power right ? the harness, everything is the same as i have except that plug, anything else related to the amp ?
Click to expand...
Click to collapse
No, this plug is the optical fiber plug. For this I purchased the Teyes Most 25 adapter. Hope, it will soon arrive.
SchaafBaeh said:
No, this plug is the optical fiber plug. For this I purchased the Teyes Most 25 adapter. Hope, it will soon arrive.
Click to expand...
Click to collapse
Yes i had a look on the web for some adapters..not really much about them.
Any idea about how to download latest software ?
Have you tested yours with phone calls ?
Sebytech said:
Yes i had a look on the web for some adapters..not really much about them.
Any idea about how to download latest software ?
Have you tested yours with phone calls ?
Click to expand...
Click to collapse
My sim card and wlan are working fine. So I opened the app Futo and checked for new versions (automatic updater) . After download and installation I opened teyes and downloaded the latest versions of all other apps.
Because I have no sound so far, I could no test it with sound. But as I received a phone call (phone was connected via BT) the CC3 showed me all needed buttons know for accepting/cancelling and ending a call.
I think i have a old version on mine, cannot find FOTA.
Can't you download it from their website?
SchaafBaeh said:
Can't you download it from their website?
Click to expand...
Click to collapse
I have spent the last few days to find all kinds of info in regards canbus, settings, mic settings, bluetooth settings, anything on their website is useless. either they have sold me a diff unit.. don`t know yet..took me a month to make it work..bad company
Sebytech said:
I have spent the last few days to find all kinds of info in regards canbus, settings, mic settings, bluetooth settings, anything on their website is useless. either they have sold me a diff unit.. don`t know yet..took me a month to make it work..bad company
Click to expand...
Click to collapse
Oh, ok. That's bad. And the support named Dan can't help you?
SchaafBaeh said:
Oh, ok. That's bad. And the support named Dan can't help you?
Click to expand...
Click to collapse
I am not sure, i do not know him and takes days for support to answer, i am not sure about this forum if anybody will help, but be aware about the following issue you might have with yours. Bluetooth connection will show phone but no dial list on dash, on the cc3 while on call the dial conversation stays on top..you need external mic, apparently will not use the oem one ..hopefully you will have better luck than me, i am almost there to go back to oem and just leave it...sim with lte its only for data only no phone calls. what is the point to have just data ? would have been nice to connect with the canbus and show on dash as cc3 and be able to make phone calls. Also why have a mic on the unit ? mic has to be close to u and well protected..
update me when you have setup.
Ok. I will. Have a nice day anyway.
Sebytech said:
Thank you, i will check that, i have check everything that is on the website, instructions are minimal, not everything is plug and play, any idea how to download the latest software? i have the latest mcu firmware but it always says invalid serial it.
thank you
Click to expand...
Click to collapse
Email Teyes directly and ask them for support. They have your data.
Only try via Dan if you purchased via Dan.