I can`t find a working SDVC app for my PX5 GS unit. It is my second unit because the first has had a fault and was exchanged. On the first unit I used Graser´s Dasaita tool for volume control. On the new unit that isn´t working anymore and also MyMTCService does not recognise the unit as MTCD and so the sound control is not working.
The only thing that is different to the old unit are the connectors. The GPS connector uses now a Fakra plug, but I don´t think that this is a problem since all other GPS apps are working normally.
Neither Malaysk, the original GS ROM nor a HA ROM is working. I've tried also different MCU's.
Here you can see the problem with Grasers Dasaita tool. I am not driving and not changing the volume level: https://youtu.be/aT0asijim5g @Graser maybe you can help me?
Related
Hi All
Thanks for any help you can give with this, i have been unable to find this problem mentioned elsewhere.
I have changed the mcu on my px3 1gb rk3188 head unit as i had been having trouble with the steering wheel controls being intermittent over the canbus.
I am sure my original was a kgl mcu but if i install that one and a few others i get a random beep every few seconds.
I have just tried the newest www and mx mcus and i also get the beep on these
The last mcu i had without the beep i think it was an mx one had no option for disabling the reversing camera
i was hoping to try hals nougat firmware however this requires a newish mcu.
Is there a fairly generic brand mcu which is likely to be a winner for me please or is there anything i can do to stop the random beeping please?
Also is there any way to make my steering wheel controls less intermittent please they will work fine for a while and then stop completely and same in the car diagnostics app so i assume it gets bored listening to the canbus and gives up.
it is a 2011 seat ibiza ecomotive.
Thanks
Kamcel
It could be the spring cable in the steering wheel if I understand correctly. My cable is going/intermittent but reprogrammed the buttons there are 2 sets for each button, I think it's a resistance issue, but it appears to be working for me.
Sent from my Z981 using Tapatalk
I just bought a Belsee PX5 Octo Core Android Head Unit for my 2016 Hyundai Veloster. It has a custom harness made for the car. It works great, except there is no sound. The backup camera works, the steering wheel controls work. Everything works....except sound. I am trying to work with Belsee via Email, but we all know how that goes. I am wondering if any of you fine people might have any suggestions that I can try.
I have gone into Factory Settings menu and changed the CANBUS to Hyundai &KIA, still no sound. The Veloster requires a signal over the CANBUS to turn the factory Amp on and produce sound.
Thanx in advance.
what did the reseller suggest when you contacted them for support? Was that to change CanBus settings?
Hi, i have the same problem after upgrading from px3... Did you resolve the problem?
I now have sound..had to swap to a harness with a CANBUS controller on it. But, the EQ does not work, the rear speakers are super low, and there is that electrical whine from the engine. But at least there is sound.
Hi I am new here but I also had the same issue with my Nissan qashqai and the Bose system. I have found that on my vehicle in the Belsee power harness that pin 1 was not present which is the 12v positive that feeds the Bose sound system. I would suggest you get a wiring diagram for the cars head unit and check to see if this is the problem.
Hi All,
I need to find some info for the Can adapter so i can fix my issue and help other people with similar problems too .Owner of an MTCD PX5 unit, specific for Mercedes ML (W164) that came with the Can adapter.
From day one the steer wheel buttons worked (vol up/down, phone) and reverse camera out of the box BUT i had no vehicle info at all (door opened, fuel level, temperature, parking sensors etc) as many of the users especially on VW units have. The car is a 2010 model therefore the canbus info should be plenty. Tried all the combinations of CanBus under the extra settings with no luck.
One think i noticed is that i had NO Vehicle.apk or microntek apk and MTCCanbus.apk installed on the unit. I tried to install but installation was failing for both. Even copying to system/app/** didn't worked.
Any idea ?
BTW Anyone knows what is the Knob Mode under extra settings ? Mine is set to : 2 10k/20K ADC Ports
Details:
Unit: MTCD PX5
MCU: MTCE_GS_V3.00_3
ROM: Halk9 Mod 3.1 (Android 8)
Can Adapter : GS 10280514 / HW:V2 SW:V3
Can adapter Setting: 23 Benz_B200(simple)
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
zollaki said:
Hi, i have the same car the same headunit and the same problem.
All is fine but i want to have more can-informations/functions.
Click to expand...
Click to collapse
Good to know that this is a generic issue and not specific to my unit and car. It seems a lot of people with Mercedes cars have similar problems. I wonder if this is related with the cheap implementation of the Chinese Can adapters or related with the car.
Will keep searching
Another thread is open with more technical details for similar issue, more HW oriented though here > https://forum.xda-developers.com/android-auto/mtcd-discussion-questions-development
I have the same car w164 and px5 android 8
The same problem.
No I have more problems the canbas stop working no reverse camera no Wheel key vol working and no led light on unit key, I think my canbus dead ?
Hello, Guys.
got some problem with my MTCD unit. my Bluetooth screen popping up all the time and try to make the call itself when i connect my phone. if the phone disconnect but the bluetooth screen still keep popping up. i have to disable the bluetooth function now. any idea how to have it fix. i got the BC5 bluetooth in the unit and with apple carplay build-in. i try different firmware, but the problem stay the same, i swap few different simple canbus and still having this problem. now i running hal9k latest rom.
thank you very much.
Hello ...
I have a problem with my eonon (klyde) px3 unit. Ever since I bought it, I have had a problem with usb ports.
When I use the USB dashcam and activate it, or when I use the USB flash disks from the speakers to listen to an electronic hiss, like electronic processing noise.. :crying:
If I turn the volume down to 0 the noise ends.
I tried to solve it like this:
- I replaced with new mtcd / mtce,
- I updated to the latest mcu version
- I flash mcu modified by wadzio( the audio sound is better, but the problem remains.)
- Eonon obviously tells me that it is normal to lower AMP to - 20 but the problem remains the same.
- I connected the chassis of the unit to the ground of the machine.
- I connected a 12v filter that is used in the car units of a good audio brand, to eliminate the hiss of the engine and alternator
Neither of these things solved the problems
Do you know if it is possible to install resistors, capacitors, or solve the problem with me or try to find it? Thanks
You are correct that the problem is a hardware issue and not software.
I dont own this variant, but willing to help - if I can get a unit sent to me, I could attempt to find root cause and develop a fix that could then be shared with the community.
marchnz said:
You are correct that the problem is a hardware issue and not software.
I dont own this variant, but willing to help - if I can get a unit sent to me, I could attempt to find root cause and develop a fix that could then be shared with the community.
Click to expand...
Click to collapse
Thanks ...
I have already changed the mtcd cardboard but nothing ..
- The problem is I have the px3 coreboard,
- Display management motherboard that interferes mtcd board,
- Mtcd motherboard badly designed