EDIT: POST SOLVED I don't know why but samsung recovery appear to me for the first time and after a wipe factory reset the phone boot!
Hi all, my mother's phone where stuck in bootloop during a system update, and now I'm trying to fix it. First thing I've tried was to flash a new firmware via Odin but problem still remains and after flash a system update give an error and bootloop again and again. I've tried to flash a custom recovery for wipe all data partitions following this post's instruction but Odin give me this error
Code:
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
And on Odin mode in the phone screen is write this: Custom Binary(RECOVERY) Blocked by FAP Lock
Whats can I do?
Thanks so much in advance
Related
hello
I have the Samsung Galaxy Note 10.1 in 8013 16 GO there, exactly.
I intallé anderoid jelly bean 4.1.1 OTA and did not finish the tablet and restart nonstop. I started handling but nothing goes as planned, ODIN said fail Action! and my tablet is in download mode. And when I reboot I have a small andriod man with the percentage bar with the screen that pops by gray bars. suddenly I think I scrub the tablet and I do not really know what
thank you in advance for helping me because odin know my tablet (the tablet comes into download mode and not in recovry mode) it may not complete the installation with the following message:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
3achour said:
hello
I have the Samsung Galaxy Note 10.1 in 8013 16 GO there, exactly.
I intallé anderoid jelly bean 4.1.1 OTA and did not finish the tablet and restart nonstop. I started handling but nothing goes as planned, ODIN said fail Action! and my tablet is in download mode. And when I reboot I have a small andriod man with the percentage bar with the screen that pops by gray bars. suddenly I think I scrub the tablet and I do not really know what
thank you in advance for helping me because odin know my tablet (the tablet comes into download mode and not in recovry mode) it may not complete the installation with the following message:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Re download factory rom and flash again in odin.. . You can also go in the recovery and clear cache and so on.. This will often stop a boot look . But it looks like you have a bad d/load
I'd agree with that.
I find it best to download the roms from Sammobile as they generally provide an MD5 sum you can check to make sure its not a bad download. Especially when using ODIN 4.03/07... ODIN 4.03 does the check before it flashes and ODIN 4.07 checks when the .tar file is selected.
temp
how temp for odin finish their installation
I think it's hang on: "<ID:0/006> NAND Write Start!! "
erica_renee said:
Re download factory rom and flash again in odin.. . You can also go in the recovery and clear cache and so on.. This will often stop a boot look . But it looks like you have a bad d/load
Click to expand...
Click to collapse
I have not access in the recovery mode
3achour said:
how temp for odin finish their installation
I think it's hang on: "<ID:0/006> NAND Write Start!! "
Click to expand...
Click to collapse
odin did not finish the installation process about 2 hours and even post thank you for helping me
You need to download the rom again to see if it's not a corrupted copy. Use a PC to download it from sammobile.com.
If the flash file you are using is corrupt you can flash it til this century ends and it won't work...
If it still doesn't get past nand write then I believe you may need a pit file to repartition your internal memory. THIS IS A VERY DANGEROUS OPERATION. Make sure you have the correct pit file and if possible get it with an MD5 checksum so you know there is nothing wrong with the downloaded file. It MUST be for your device or bricking may occur, it MUST not be corrupted or bricking will occur.
Good luck and remember, you have been warned...
Thanks to Atntpt that opened my mind. I've unpacked .Tar odin package of 5.1.1 and flashed something like modem,boot and recovery (adding .tar in the file names before flash them) one per time, then a custom kernel and last twrp, and the phone stops to reboot. Samsung Switch done the rest of the work. Hi guys, please help me, i'm working no stop on my phone from yesterday without a solution. Yesterday i've tryed to flash mm(Coming from noblerom installed without tripping knox with modified bootloader of 5.0) from the post in general. Flash of mm has fail with an error of a bootloader. then i've tryed to flash latest stock rom(not of my country), and gave me an error in flashing hidden.img, i've tryed to flash in odin, seems fine and phone boots but have no charge. attacched to charger the phone boots and shut down after 5 seconds.
Both recovery and download mode, works
in official recovery and twrp can't mount system
in official says
failed to mount '/system (invalid argument
If you know something about, please help me.
Log of odin flash
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
after hidden fails flash custom kernel via odin.. i should boot normaly..(will tip KNOX!!) that was the reason i tiped knok was unable to bypass that situation
Atntpt said:
after hidden fails flash custom kernel via odin.. i should boot normaly..(will tip KNOX!!) that was the reason i tiped knok was unable to bypass that situation
Click to expand...
Click to collapse
can you send me a link?
I'm glad I could help
Friends,
I try to install Twrp( twrp-3.0-915P_915R4) using Odin, it show success (pass) and reboot,but when i go back to recovery mode its stock recovery !!
any can tell me where i am making mistake
why after successful installation of twrp.tar i am not getting custom recovery
In note edge about me (it show software status : custom)
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
samaly said:
Friends,
I try to install Twrp( twrp-3.0-915P_915R4) using Odin, it show success (pass) and reboot,but when i go back to recovery mode its stock recovery !!
any can tell me where i am making mistake
why after successful installation of twrp.tar i am not getting custom recovery
In note edge about me (it show software status : custom)
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
I remember, that after flashing custom recovery most stock roms reflash the stock recovery during first boot. Try to flash twrp, when process is finished pull battery, put it back in and drictly boot into recovery. When leaving twrp it usually says something like "prevent ROM from flashing stock recovery" which must be answered with "Yes". That should do the trick.
charly-whiskey said:
I remember, that after flashing custom recovery most stock roms reflash the stock recovery during first boot. Try to flash twrp, when process is finished pull battery, put it back in and drictly boot into recovery. When leaving twrp it usually says something like "prevent ROM from flashing stock recovery" which must be answered with "Yes". That should do the trick.
Click to expand...
Click to collapse
Well i flashed the Twrp recovery thrice than finally i got custom recovery
Thank you Charly
I had the plan to give my GT-N8010 a new rom, I had an old stock Samsung ROM. So I succeeded to root my device bij flashing CF-Auto-Root by using Odin. Next I downloaded Twrp in the Googles Playstore and tried to install the right Twrp. And then......it gave a mistake. Since that time I can't start my device. I succeeded in coming in download mode and flashed Twrp. But the the device is now continiously starting en starting. The only thing I can do is coming in Downloadmode. Flashed Twrp with Odin. It indicates "passed" and no failure, but after that the device is continiously starting only with the startviews from samsung.
Please please, who can help me
tryer2 said:
I had the plan to give my GT-N8010 a new rom, I had an old stock Samsung ROM. So I succeeded to root my device bij flashing CF-Auto-Root by using Odin. Next I downloaded Twrp in the Googles Playstore and tried to install the right Twrp. And then......it gave a mistake. Since that time I can't start my device. I succeeded in coming in download mode and flashed Twrp. But the the device is now continiously starting en starting. The only thing I can do is coming in Downloadmode. Flashed Twrp with Odin. It indicates "passed" and no failure, but after that the device is continiously starting only with the startviews from samsung.
Please please, who can help me
Click to expand...
Click to collapse
after installing Twrp I get next message:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Flash stock rom via Odin .
I succeeded inrecovering my device bin flashing stock rom by Odin. Thank you JJEgan
Yesterday I wanted to flash a nobrand ROM, I started flashing but on odin it gave me FAIL and the phone restarted, but guess what, it went in a bootloop. After few hours of problemsolving I remembered that I forgot to unlock OEM and enable debugging mode, dunno why I didn't think about it, maybe because I decided to flash while I was really sleepy. So, right now I am trying to put some stock firmware but nothing happens, what am I supposed to do now? The device is a SM-G955F
if u can go to download mode theres still hope. Download the CRGB DBT CSC version, its the latest, for g955f and flash it and if it fails see if you can boot to recovery and try to wipe everything and then go to download mode and try to flash again.
If not post your error to try to understand whats happening
Did that but it keeps giving me the same error when I go in to the bootloader: E:failed to mount /efs (invalid argument)
arw you using the latest odin? if so confirm you dont have a corrupted rom, dont use home-csc, use the normal csc to flash. a screenshot of odin might help to see wheres your problem and whats flashing correctly
I don't think I am using a corrupted ROM and yeh I have been using the normal CSC to flash. Here is the odin log:
Code:
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5603 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> up_param.bin
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> userdata.img
<ID:0/006> modem.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> modem_debug.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
and here is the error in the bootloader:
https://ibb.co/hbwO0e
i dont see error in the flashing rom state, i dont know why the last part repeat 3 times, bootloader is ok.
Did you tried flashing the stock recovery alone? that efs problem happened to me before when i flashed another region rom and wiped the efs carpet, i was able to boot but without signal.
Try flashing another region rom or flashing only modem file or recovery file, at this point your problem is with a corrupted missing efs or recovery, dont use pit file and let the phone boot alone without the usb if not force power off and try to boot again, dont go into recovery