Yesterday I wanted to flash a nobrand ROM, I started flashing but on odin it gave me FAIL and the phone restarted, but guess what, it went in a bootloop. After few hours of problemsolving I remembered that I forgot to unlock OEM and enable debugging mode, dunno why I didn't think about it, maybe because I decided to flash while I was really sleepy. So, right now I am trying to put some stock firmware but nothing happens, what am I supposed to do now? The device is a SM-G955F
if u can go to download mode theres still hope. Download the CRGB DBT CSC version, its the latest, for g955f and flash it and if it fails see if you can boot to recovery and try to wipe everything and then go to download mode and try to flash again.
If not post your error to try to understand whats happening
Did that but it keeps giving me the same error when I go in to the bootloader: E:failed to mount /efs (invalid argument)
arw you using the latest odin? if so confirm you dont have a corrupted rom, dont use home-csc, use the normal csc to flash. a screenshot of odin might help to see wheres your problem and whats flashing correctly
I don't think I am using a corrupted ROM and yeh I have been using the normal CSC to flash. Here is the odin log:
Code:
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5603 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> up_param.bin
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> userdata.img
<ID:0/006> modem.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> modem_debug.bin
<ID:0/006> Transmission Complete..
<ID:0/006> Now Writing.. Please wait about 2 minutes
<ID:0/006> Receive Response from boot-loader
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
and here is the error in the bootloader:
https://ibb.co/hbwO0e
i dont see error in the flashing rom state, i dont know why the last part repeat 3 times, bootloader is ok.
Did you tried flashing the stock recovery alone? that efs problem happened to me before when i flashed another region rom and wiped the efs carpet, i was able to boot but without signal.
Try flashing another region rom or flashing only modem file or recovery file, at this point your problem is with a corrupted missing efs or recovery, dont use pit file and let the phone boot alone without the usb if not force power off and try to boot again, dont go into recovery
Related
I just got this phone 2 days ago.
While i was flashing around. i tried to flash from 5.1.1 (noble rom) to 6.0.1 S7 edge port also noble. but it seems i'm stuck at Boot logo.
Flashing "G920FXXU3DPB6_G920FDRE3DPB1_G920FXXU3DPB6_HOME.tar (6.0.1)" gives me an error as well. it fails to flash in odin.
but lucky i got twrp backups from my previous roms lol.
Thanks for helping
Also a question. is Lollipop performing better than Marshmallow? :good: Specially the battery here is the question.
Marsmallow is better than Lollipop on S6.
Can you post the Odin error log here?
forumber2 said:
Marsmallow is better than Lollipop on S6.
Can you post the Odin error log here?
Click to expand...
Click to collapse
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> cm.bin
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This shows up actually...... thanks for your reply mate
xDroidZz said:
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> cm.bin
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This shows up actually...... thanks for your reply mate
Click to expand...
Click to collapse
If your phone is G920F, then flash this ROM. Make sure you selected PIT file on Odin (PIT file included in ROM zip)
https://docs.google.com/uc?id=0B3U72O5ZZ8z-STJiWWJmR2hPM1U&export=download
After you've flashed it, flash the Marsmallow ROM via Odin (without PIT file).
Aftery you've flashed Marsmallow ROM, make factory reset via recovery.
Done!
forumber2 said:
If your phone is G920F, then flash this ROM. Make sure you selected PIT file on Odin (PIT file included in ROM zip)
https://docs.google.com/uc?id=0B3U72O5ZZ8z-STJiWWJmR2hPM1U&export=download
After you've flashed it, flash the Marsmallow ROM via Odin (without PIT file).
Aftery you've flashed Marsmallow ROM, make factory reset via recovery.
Done!
Click to expand...
Click to collapse
I've managed to flash it.
Downloaded a firmware from samfirmware. included were (AP,PDA,BL, etc) which worked as it should.
Thanks for your help anyway!
Hello,
I tried to root my phone samsung galaxy s5 model SM-G900F, then I tried to flash twrp.
My phone here stop working and on the screen it's written Firmware upgrade encounter and issue. Please select recovery mode in kies. Try more then 10 times and it fails I search on google they are saying that kies is buggy and it better to do it using odin. I downloaded the stock ROM from here sammobile . com/firmwares/database/SM-G900F/ with region United Arab Emirates.
It fails the log is
Code:
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> NON-HLOS.bin
<ID:0/006> rpm.mbn
<ID:0/006> sbl1.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can you please advise me what should I do ?
Edit one:
After read the screen it was saying the the size is wrong and image is wrong. I read in google that I need pit file for my model but couldn't find anyone for XSG.
I forgot to mention that I used an sd card in adaptive mode using adt command. Maybe that reason for pit file thing. Now I am trying to recover it using kies on mac.
but in worst case if it didn't work and I couldn't find pit file that mean the phone will not run again ?
Solution: I downloaded android 5 ROM but not for my region then flash it. The phone worked then I updated the phone using system update in the phone it self
So I messed up my s7 by flashing a wrong version of xposed and now I can't go back to stock.
Trying to flash it through Odin but I get a "sw rev check fail" message
Please help :'(
marcotics said:
So I messed up my s7 by flashing a wrong version of xposed and now I can't go back to stock.
Trying to flash it through Odin but I get a "sw rev check fail" message
Please help :'(
Click to expand...
Click to collapse
Are you sure you are flashing correct firmware and the latest version?
Yes, I'm trying to flash G930TUVS2APB8
Should I only do "AP"? Or try all four files?
What do I do in the CSC field? Load the CSC or HOME_CSC file?
Should I try the special Odin by PrinceComsy or 3.11?
This is what I get on Odin
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> persist.img.ext4
<ID:0/006> Home Binary Download
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> emmc_appsboot.mbn
<ID:0/006> lksecapp.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This is what shows up on Odin
Fixed the problem!!! thanks
What was the solution? I'm having this issue as well
Try going into recovery and factory reset(wipe data)
It got fixed by using my pc rather than my laptop (had same drivers installed so no idea)
Also downloaded the absolute latest firmware from sammobile and latest Odin
Hope you can fix your problem man.
Note: if it doesnt let you flash stock I read that it may be because you're trying to flash something older, by default you cannot downgrade on s7
UPDATE: Thanks to a helpful video I was able to get back into the phone. It required for you to have a locked SIM card and just following all the steps in the video
Here is the video if anyone is having similar issues: https://www.youtube.com/watch?v=1p-affHYB8s&t=189s
Very new to this but my brother gave me a Samsung galaxy J7 model sm-j737a. I do not have the google account associated with it, neither does he, and so I tried using odin to flash the stock firmware in it but I keep getting a fail in writing. I am not sure if its the firmware that I am using that is wrong or what (Full Firmware J737AUCU1ARE6_J737AATT1ARE6_8.0.0 BY Windows4Droid). Does anyone have the official stock firmware for the SM-J737A? Is there another way to go about this? Below I listed what it says when I try to install it in Odin3 13.1. Any help for this noob would be greatly appreciated. Thanks!
Once I click Start, I get this:
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3964 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is the firmware your trying to flash the correct bootloader? ( the 5th number from the right of the firmware name... E.G. .....2AUSR1 the (2) would be the bootloader version. They usually need to match accordingly or be higher than the one on the phone already.
Anyone know how to bypass same phone on pie?
Dear friends!
I myself use and flash a Xiaomi device, easy peazy. a friend of mine kinda softbricked her S10e Exynos and asked me for help, so I try to fix her issue but I am not succeeding. So I am not the most expierenced with Samsung devices.
She flashed a Lineage rom and corresponding TWRP, OEM is unlocked. Now Download mode opens automatically after bootloader warning. So I thought Odin or heimdall should be a piece of cake. But Odin always ends with failed write process and when I flash a recovery with heimdall I cannot reach recovery mode, it is always D/L mode. Cable is fine, tried every USB port on two Notebooks
Original Firmware is downloaded by SamFirm.
Can anyone give me advise how to go on??
Thanks
Code:
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 8538 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> up_param.bin
<ID:0/006> cm.bin
<ID:0/006> keystorage.bin
<ID:0/006> uh.bin
<ID:0/006> vbmeta.img
<ID:0/006> boot.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!