I just got this phone 2 days ago.
While i was flashing around. i tried to flash from 5.1.1 (noble rom) to 6.0.1 S7 edge port also noble. but it seems i'm stuck at Boot logo.
Flashing "G920FXXU3DPB6_G920FDRE3DPB1_G920FXXU3DPB6_HOME.tar (6.0.1)" gives me an error as well. it fails to flash in odin.
but lucky i got twrp backups from my previous roms lol.
Thanks for helping
Also a question. is Lollipop performing better than Marshmallow? :good: Specially the battery here is the question.
Marsmallow is better than Lollipop on S6.
Can you post the Odin error log here?
forumber2 said:
Marsmallow is better than Lollipop on S6.
Can you post the Odin error log here?
Click to expand...
Click to collapse
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> cm.bin
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This shows up actually...... thanks for your reply mate
xDroidZz said:
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006> cm.bin
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This shows up actually...... thanks for your reply mate
Click to expand...
Click to collapse
If your phone is G920F, then flash this ROM. Make sure you selected PIT file on Odin (PIT file included in ROM zip)
https://docs.google.com/uc?id=0B3U72O5ZZ8z-STJiWWJmR2hPM1U&export=download
After you've flashed it, flash the Marsmallow ROM via Odin (without PIT file).
Aftery you've flashed Marsmallow ROM, make factory reset via recovery.
Done!
forumber2 said:
If your phone is G920F, then flash this ROM. Make sure you selected PIT file on Odin (PIT file included in ROM zip)
https://docs.google.com/uc?id=0B3U72O5ZZ8z-STJiWWJmR2hPM1U&export=download
After you've flashed it, flash the Marsmallow ROM via Odin (without PIT file).
Aftery you've flashed Marsmallow ROM, make factory reset via recovery.
Done!
Click to expand...
Click to collapse
I've managed to flash it.
Downloaded a firmware from samfirmware. included were (AP,PDA,BL, etc) which worked as it should.
Thanks for your help anyway!
Related
Hello,
I tried to root my phone samsung galaxy s5 model SM-G900F, then I tried to flash twrp.
My phone here stop working and on the screen it's written Firmware upgrade encounter and issue. Please select recovery mode in kies. Try more then 10 times and it fails I search on google they are saying that kies is buggy and it better to do it using odin. I downloaded the stock ROM from here sammobile . com/firmwares/database/SM-G900F/ with region United Arab Emirates.
It fails the log is
Code:
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> NON-HLOS.bin
<ID:0/006> rpm.mbn
<ID:0/006> sbl1.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Ext4)
<ID:0/006>
<ID:0/006> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can you please advise me what should I do ?
Edit one:
After read the screen it was saying the the size is wrong and image is wrong. I read in google that I need pit file for my model but couldn't find anyone for XSG.
I forgot to mention that I used an sd card in adaptive mode using adt command. Maybe that reason for pit file thing. Now I am trying to recover it using kies on mac.
but in worst case if it didn't work and I couldn't find pit file that mean the phone will not run again ?
Solution: I downloaded android 5 ROM but not for my region then flash it. The phone worked then I updated the phone using system update in the phone it self
Hey guys i just rooted my Galaxy S7(loving the root btw XD) and i am now have trouble installing TWRP through Odin v3.12.
Ive tried using a .tar file and .md5 both times its gets stuck hanging and then Odin stops responding.
Im positive Odin is no issue as i had no trouble installing the custom rom, perhaps the link became corrupted? Any input would be a great help!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Unfortunatley it wont allow me to post the link since i have not posted 10 times...
Hey,
I hope there is someone who can help me. I know there are several other Threads about this Topic but i couldnt find the answer for this.
I just rooted my Samsung Galaxy S7 and after that I deactivated OEM unlock by mistake. Now I want to flash the firmware back to start from scratch.
Firmware from sammobile: SAMSUNG GALAXY S7 SM-G930F XEG GERMANY (1&1) G930FXXS5ESF1 FIRMWARE
ANDROID 8.0.0
But when I try to flash i only reach system.img and right after the error Complete(write) Operation Failed.
Does anybody know what I can do to get this problem fixed.
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> param.bin
<ID:0/006> modem_debug.bin
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 4091 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks alot
TehMeddin said:
Hey,
I hope there is someone who can help me. I know there are several other Threads about this Topic but i couldnt find the answer for this.
I just rooted my Samsung Galaxy S7 and after that I deactivated OEM unlock by mistake. Now I want to flash the firmware back to start from scratch.
Firmware from sammobile: SAMSUNG GALAXY S7 SM-G930F XEG GERMANY (1&1) G930FXXS5ESF1 FIRMWARE
ANDROID 8.0.0
But when I try to flash i only reach system.img and right after the error Complete(write) Operation Failed.
Does anybody know what I can do to get this problem fixed.
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> param.bin
<ID:0/006> modem_debug.bin
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 4091 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> cm.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks alot
Click to expand...
Click to collapse
Flash Germany unbranded DBT.
Is FRP lock on?
cooltt said:
Flash Germany unbranded DBT.
Is FRP lock on?
Click to expand...
Click to collapse
well just ignore my post.... my laptop seems to be over his best years.
changed laptop and it worked.
but thanks for your help.
is there a way to close the thread?
TehMeddin said:
well just ignore my post.... my laptop seems to be over his best years.
changed laptop and it worked.
but thanks for your help.
is there a way to close the thread?
Click to expand...
Click to collapse
Edit the post title to" Solved"
Dear friends!
I myself use and flash a Xiaomi device, easy peazy. a friend of mine kinda softbricked her S10e Exynos and asked me for help, so I try to fix her issue but I am not succeeding. So I am not the most expierenced with Samsung devices.
She flashed a Lineage rom and corresponding TWRP, OEM is unlocked. Now Download mode opens automatically after bootloader warning. So I thought Odin or heimdall should be a piece of cake. But Odin always ends with failed write process and when I flash a recovery with heimdall I cannot reach recovery mode, it is always D/L mode. Cable is fine, tried every USB port on two Notebooks
Original Firmware is downloaded by SamFirm.
Can anyone give me advise how to go on??
Thanks
Code:
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 8538 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> up_param.bin
<ID:0/006> cm.bin
<ID:0/006> keystorage.bin
<ID:0/006> uh.bin
<ID:0/006> vbmeta.img
<ID:0/006> boot.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Yes I know, its a very basic question but I need some help. I was following this https://www.thecustomdroid.com/root-samsung-galaxy-a8-a8-plus-2018-guide/ guide but Odin didnt flash the phone for some reason (I sadly dont have the logs, sorry). The phone ended up getting in some emergency mode and all I had to do was reflash. I still want to root my A8 but I dont really want to follow their guide anymore.
See the Magisk installation instructions.
Please note that since TWRP is available for this device, you don't necessarily have to patch the AP file in Magisk. Just install TWRP, and flash Magisk in TWRP.
V0latyle said:
See the Magisk installation instructions.
Please note that since TWRP is available for this device, you don't necessarily have to patch the AP file in Magisk. Just install TWRP, and flash Magisk in TWRP.
Click to expand...
Click to collapse
The problem is with TWRP. I cant flash it. It even says OEM LOCK: OFF in Download Mode. I just tried again today.
bunkermatty said:
The problem is with TWRP. I cant flash it. It even says OEM LOCK: OFF in Download Mode. I just tried again today.
Click to expand...
Click to collapse
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 38 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
bunkermatty said:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 38 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Screenshot of Odin please
I figured it out. I used Heimdall with the command
Code:
heimdall flash --RECOVERY twrp-3.7.0_9-0-jackpotlte.img --no-reboot
.