Thanks to Atntpt that opened my mind. I've unpacked .Tar odin package of 5.1.1 and flashed something like modem,boot and recovery (adding .tar in the file names before flash them) one per time, then a custom kernel and last twrp, and the phone stops to reboot. Samsung Switch done the rest of the work. Hi guys, please help me, i'm working no stop on my phone from yesterday without a solution. Yesterday i've tryed to flash mm(Coming from noblerom installed without tripping knox with modified bootloader of 5.0) from the post in general. Flash of mm has fail with an error of a bootloader. then i've tryed to flash latest stock rom(not of my country), and gave me an error in flashing hidden.img, i've tryed to flash in odin, seems fine and phone boots but have no charge. attacched to charger the phone boots and shut down after 5 seconds.
Both recovery and download mode, works
in official recovery and twrp can't mount system
in official says
failed to mount '/system (invalid argument
If you know something about, please help me.
Log of odin flash
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
after hidden fails flash custom kernel via odin.. i should boot normaly..(will tip KNOX!!) that was the reason i tiped knok was unable to bypass that situation
Atntpt said:
after hidden fails flash custom kernel via odin.. i should boot normaly..(will tip KNOX!!) that was the reason i tiped knok was unable to bypass that situation
Click to expand...
Click to collapse
can you send me a link?
I'm glad I could help
Related
Hello all,
My tablet note 10.1 N8000 (3G, Wi-Fi, 16 GB) suddenly got stuck in bootloop. I was not trying to flash anything when it did so, nor did I flashed anything recently before the bootloop (although it seemed to constantly freeze before the bootloop when trying to switch between my two whatsapp accounts that I have using Titanium Backup which allows creating more than one account in all apps).
I did however root the device when I bought it in 2012 and it was the only time I did so, and I still have USB debugging mode on.
The device would bootloop in the first Samsung logo most of the time, but on rare occasions it would move to the second animated logo and get stuck repeating the animation forever.
I can only access Odin Download mode, but cannot access recovery mode (when I try to do so, it shows the first Samsung logo, then attempts to go into recovery but only shows a lit black screen then reboots).
Here are the steps I did (might help some of you, but unfortunately didn't help me):
1) I tried flashing a custom recovery (CMW, Philz touch, TWRP, and stock recovery) through Odin (Odin 3 version v3.10.6):
- Put the .tar file in AP slot then put device in download mode (power key + volume down), then plug device into my computer.
- Check only auto restart and F. time reset.
- Here's what it says after flashing:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
2) I tried flashing stock rom through Odin:
(Roms I tried: N8000XXCMF1, N8000XXUDOF1, N8000XWALG7, N8000XXCMA2, N8000XXUDOF1)
- I put the .tar.md5 file in AP and follow same steps above, here's what Odin says after flashing:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
3) I tried following the post here:
http://forum.xda-developers.com/galaxy-note-10-1/general/n8000-stuck-samsung-logo-t3212923
I followed everything until the part where I have to access recovery (because I could not access recovery still to flash rom from recovery). Here's what it says in Odin after it's done:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300_Repair_efs.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> efs.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
But again it did not work even though it always says "PASS"! And I also tried flashing stock rom after trying this method through Odin, shows success but still stuck in bootloop.
I don't know what else to try really. I will not take it to support to fix it, either I fix it myself or use it as a cutting board.
If anyone has any ideas please reply. I'm sure there are more things to try.
EDIT:
- Is there a way to clear cache without accessing recovery (since I can't access it)? Lots of people say it worked after clearing cache.
- Is Nand erase all an option? I wish someone would explain it in details instead of telling me not to do it without saying exactly why.
- Could the problem be in hardware? How can I know if so?
NaND ERASE WILL KILL THE PRODUCT .
JJEgan said:
NaND ERASE WILL KILL THE PRODUCT .
Click to expand...
Click to collapse
So you mean that it will erase everything even the Odin download mode and the Samsung logo? Why would they include this option then? I don't see any practical use of it :/
No help?
RHAddict said:
So you mean that it will erase everything even the Odin download mode and the Samsung logo? Why would they include this option then? I don't see any practical use of it :/
Click to expand...
Click to collapse
Odin is a tool that we are able to borrow .
You could try recovery via KIES .
RHAddict said:
No help?
Click to expand...
Click to collapse
HI RHAddict,
It happened to my Note GT-N8000, if a Hardware failure. If you send to SAMSUNG service center it will cost u around US$ 200 for motherboard replacement. But i manage to find a mobile service center, the technician said it only 1 of the chip in motherboard out of service. I got my tablet fixed just US$ 50-60. Now is working as is it before.
TQ
My Samsung 8010 has just gone exactly the same way. Cannot enter recovery mode, just get a blank lit screen for a second then goes back into a reboot cycle and never gets past the Samsung logo. Did you get anywhere with fixing it, or have you given up? Was thinking of taking mine to a service centre, but probably not worth it?
I have successfully installed TWRP without a hitch, and I can roll that back to stock recovery if I need to. Now, I have tried every available Sprint friendly rom I can find including stock ROMs. MOAR, etc. Every time I try to install a zip I encounter the same error:
Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Error installing zip file '/sdcard/customROMfile.zip'
Not sure if this helps but the only zip file it ever successfully installed was Galaxy Note 5 OGD/OI6/OK3 Stock Deodexed Roms (https://forum.xda-developers.com/sp...galaxy-note-5-ogd-deodexed-stock-rom-t3191065) That installed correctly but when rebooting the phone is exactly the same - hangs on boot flash SAMSUNG logo screen as soon as you turn it on.
I did try to roll back to the stock firmware using Odin but when I try to choose the file within Odin to push to the phone Odin freezes. I have spent 3 days on this now and I really don't know what to do. I hope I didn't brick this $400 phone. Any help is surely appreciated as I have already had to buy a cheap replacement for the time being.
These are the errors I receive when trying to flash a .tar (stock recovery, custom rom,) within Odin (every version I have tried...... so many different versions its crazy)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> param.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response form LOKE
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi !
Try to use some different Odin versions and also be sure you flash the proper firmware file for your device
So I'm trying to reset my phone(regular S8 but hoping if someone else had the same issue the fix might be the same) as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
ACardAttack said:
So I'm trying to reset my phone(regular S8 but hoping if someone else had the same issue the fix might be the same) as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
Click to expand...
Click to collapse
You are trying to downgrade from bootloader 5 to 4 (see here Device 5, Binary: 4 )which it wont let you. download firmware with bootloader 5
Here's what I did from start
Installed TWRP
installed lineage 17.1 with gapps and magisk
Removed everything and installed pixel experience 10 herolte
Volte was not working in both
So I downloaded the stock firmware (latest) according to my model - G930FD INS and tried to flash it through odin as per steps
But
The log gets stuck on 'SYSTEM.IMG' and after a while fails to flash the phone.
I just want to get my stock firmware back so I can start my calls and msgs.
Please help.
I didn't used anything different just clean flashed my phone.
I have the latest firmware for stock
log file
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4077 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Solved
As the problem was, while flashing with Odin it wasn't showing any error and was only giving out output as Fail, turns out it was a port problem, I changed my USB port and cable and it worked fine. My friend also gave me advice to try it on another laptop because this happens sometimes and sometimes it works.
So if your log is something similar to what I have posted try downloading the latest Odin and changing ports or PCs, if nothing then create an id here and start a thread somebody will help you out for sure.
Peace
I have a samsung 12f7, and i am having some really bad problems
i tried flashing twrp (must have been the wrong ver) and i bricked my phone
i am getting SVB fail in odin mode, and when i try flash firmware with odin i get the following logs:
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 5491 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i need help!
thanks in advance
Can you try?
While the phone is off, hold the power on and off simultaneously and connect the usb cable to the phone.
Then try to restore with odin the stock firmware.
Is your bootloader unlocked? Cant put custom stuff on till it is.
Uses csc not home csc. Stick to your binary version