Here's what I did from start
Installed TWRP
installed lineage 17.1 with gapps and magisk
Removed everything and installed pixel experience 10 herolte
Volte was not working in both
So I downloaded the stock firmware (latest) according to my model - G930FD INS and tried to flash it through odin as per steps
But
The log gets stuck on 'SYSTEM.IMG' and after a while fails to flash the phone.
I just want to get my stock firmware back so I can start my calls and msgs.
Please help.
I didn't used anything different just clean flashed my phone.
I have the latest firmware for stock
log file
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4077 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Solved
As the problem was, while flashing with Odin it wasn't showing any error and was only giving out output as Fail, turns out it was a port problem, I changed my USB port and cable and it worked fine. My friend also gave me advice to try it on another laptop because this happens sometimes and sometimes it works.
So if your log is something similar to what I have posted try downloading the latest Odin and changing ports or PCs, if nothing then create an id here and start a thread somebody will help you out for sure.
Peace
Related
Hello,
I recently borrowed my roommate's Verizon S4 because my phone broke. I rooted it because I have a different provider.
However, in my root addicted mind-set, I decided to get a custom ROM installed and so I tried to download recovery. This phone was running 5.0.1.
Upon downloading a recovery, the phone soft-bricked. It shows the Samsung logo with a wrench, and makes an error message when attempting to boot.
I tried using Odin to flash the stock firmware, but I kept getting the following error:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've searched long and far and have yet to find a solution. I know that the reason for this issue is most likely due to the 5.0.1. build, but I was hoping that maybe something had developed in the last few months.
Any and all help is appreciated.
Also, I am not able to boot into recovery, but I am able to boot into download mode - I also reinstalled the Samsung drivers, and am using Odin 10.6. I tried using the ME7 firmware, but that didn't lead to much either.
I recently found a Verizon Software Assistant file and my phone won't be recognized on the application. Not sure what next steps are. I posted on reddit too, and no luck there either.
shivpaulchadha said:
Hello,
I recently borrowed my roommate's Verizon S4 because my phone broke. I rooted it because I have a different provider.
However, in my root addicted mind-set, I decided to get a custom ROM installed and so I tried to download recovery. This phone was running 5.0.1.
Upon downloading a recovery, the phone soft-bricked. It shows the Samsung logo with a wrench, and makes an error message when attempting to boot.
I tried using Odin to flash the stock firmware, but I kept getting the following error:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've searched long and far and have yet to find a solution. I know that the reason for this issue is most likely due to the 5.0.1. build, but I was hoping that maybe something had developed in the last few months.
Any and all help is appreciated.
Also, I am not able to boot into recovery, but I am able to boot into download mode - I also reinstalled the Samsung drivers, and am using Odin 10.6. I tried using the ME7 firmware, but that didn't lead to much either.
I recently found a Verizon Software Assistant file and my phone won't be recognized on the application. Not sure what next steps are. I posted on reddit too, and no luck there either.
Click to expand...
Click to collapse
Hi shivpaulchadha
Thanks you for using XDA Assist.
I see you already posted in the correct forum before here. Could you please "bump" your thread up for it could be noticed by others users? I'm sure our experts in there will be able to tackle the issue.
Nice regards and good luck.
.
Followed all tutorials and did some specific research but failed.
I downloaded the gt-s7582 official firmware, drivers, and all were successfully installed and flashed but still encountered firmware upgrade error.
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003> dt-blob
<ID:0/003> cache.img
<ID:0/003> system.img
<ID:0/003> hidden.img
<ID:0/003> param.lfs
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
Please..
Hello,
Are you certain that you have the correct firmware for your model number, carrier and region?
Try finding a copy of the PIT file for your model, maybe someone else with your device can help you with that.
Was/is USB debugging turned on in developer options?
Can you boot to stock recovery and factory reset and wipe cache partition, then flash the stock firmware via Odin.
Does your device have a locked bootloader? If so then you'll have to flash the same stock firmware the device had before the issues or a newer firmware, flashing an older version than what you already had probably won't work.
same problem with my device
I have successfully installed TWRP without a hitch, and I can roll that back to stock recovery if I need to. Now, I have tried every available Sprint friendly rom I can find including stock ROMs. MOAR, etc. Every time I try to install a zip I encounter the same error:
Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Error installing zip file '/sdcard/customROMfile.zip'
Not sure if this helps but the only zip file it ever successfully installed was Galaxy Note 5 OGD/OI6/OK3 Stock Deodexed Roms (https://forum.xda-developers.com/sp...galaxy-note-5-ogd-deodexed-stock-rom-t3191065) That installed correctly but when rebooting the phone is exactly the same - hangs on boot flash SAMSUNG logo screen as soon as you turn it on.
I did try to roll back to the stock firmware using Odin but when I try to choose the file within Odin to push to the phone Odin freezes. I have spent 3 days on this now and I really don't know what to do. I hope I didn't brick this $400 phone. Any help is surely appreciated as I have already had to buy a cheap replacement for the time being.
These are the errors I receive when trying to flash a .tar (stock recovery, custom rom,) within Odin (every version I have tried...... so many different versions its crazy)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response form LOKE
<ID:0/003> param.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response form LOKE
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi !
Try to use some different Odin versions and also be sure you flash the proper firmware file for your device
Hi all,
My S7 (rooted) appears to be stuck in a bootloop. Last night, I was using it as normal and set it down to charge overnight.
Woke up this morning, recurring bootloop. Tried to get into recovery, but just got a 'Downloading' screen. Tried to flash a stock firmware (vol down key etc) but got
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
For info, it's rooted, running a custom rom and until yesterday was working fine. No new software has been installed in the past couple of weeks, no settings have been changed.
Any ideas as to how I can get the phone working again?
The "Downloading..." screen is where you need to be to flash stock with ODIN
Make sure to use ODIN 3.12.3 minimum version
I'll give it a go when I get home from work and report back. Seems I was using an older version of Odin (3.11.1). I now have 3.12.3.
Thanks for the reply.
So I loaded a BL, AP, CP & CSC file into Odin (stock 7.0 firmware based on my phone carrier).
Clicked Start:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Doesn't seem to like what i'm doing.
<ID:0/003> FAIL! (DeviceInfo)
Do you have a green/blue COM port lit up at the top of ODIN when you connect the phone?
Tried a different USB lead / port?
The Com port info shows in blue. Tried on two different PCs, 2 different official cables, 4 different USB ports.
Getting a bit further:
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
Any thoughts?
So I'm trying to reset my phone(regular S8 but hoping if someone else had the same issue the fix might be the same) as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
ACardAttack said:
So I'm trying to reset my phone(regular S8 but hoping if someone else had the same issue the fix might be the same) as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
Click to expand...
Click to collapse
You are trying to downgrade from bootloader 5 to 4 (see here Device 5, Binary: 4 )which it wont let you. download firmware with bootloader 5