G930F stuck in a bootloop - Samsung Galaxy S7 Questions and Answers

Hi all,
My S7 (rooted) appears to be stuck in a bootloop. Last night, I was using it as normal and set it down to charge overnight.
Woke up this morning, recurring bootloop. Tried to get into recovery, but just got a 'Downloading' screen. Tried to flash a stock firmware (vol down key etc) but got
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
For info, it's rooted, running a custom rom and until yesterday was working fine. No new software has been installed in the past couple of weeks, no settings have been changed.
Any ideas as to how I can get the phone working again?

The "Downloading..." screen is where you need to be to flash stock with ODIN
Make sure to use ODIN 3.12.3 minimum version

I'll give it a go when I get home from work and report back. Seems I was using an older version of Odin (3.11.1). I now have 3.12.3.
Thanks for the reply.

So I loaded a BL, AP, CP & CSC file into Odin (stock 7.0 firmware based on my phone carrier).
Clicked Start:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Doesn't seem to like what i'm doing.

<ID:0/003> FAIL! (DeviceInfo)
Do you have a green/blue COM port lit up at the top of ODIN when you connect the phone?
Tried a different USB lead / port?

The Com port info shows in blue. Tried on two different PCs, 2 different official cables, 4 different USB ports.

Getting a bit further:
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> modem_debug.bin
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
Any thoughts?

Related

[Q] Note SCH-I925 blinking white screen no recovery mode

I recently tried to unroot my Galaxy Note 10.1 SCH-I925. When I tried to flash the stock firmware on it I get the following:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tired almost every piece of firmware I could find but I have no success . I am still kinda new to flashing firmware but this is my only failure so this has got me stuck. Is there anyone out there with a solution or should sent it to a professional
i have the same problem if you find solution please advice

Help!! Bricked s7?

Hey guys my s7 is stuck on the "Please use Samsung switch emergency recovery" when I try to turn it on. I've tried flashing it back to stock using odin but I keep getting this error. My phone is the G930T model and the frp lock is on. I've tried different odin versions too.
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
hello, make that it's easy
https://www.youtube.com/watch?v=y8AZyalTf5Y
kgmaybe said:
Hey guys my s7 is stuck on the "Please use Samsung switch emergency recovery" when I try to turn it on. I've tried flashing it back to stock using odin but I keep getting this error. My phone is the G930T model and the frp lock is on. I've tried different odin versions too.
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
I've had that problem. The really easy way to fix this is to just flash TWRP through Odin.
Have you tried to do what it told you to do and use Smart Switch? If it doesn't work, you could try to initialize using Smart Switch.

GT-N8013 help

so im working on a GT-N8013 with a little known background. was stock and rooted then the owner flashed a custom rom not for the device im guessing and it now boots to a white screen for os and recover. im only able to access download mode. issue is trying to flash anything in odin fails with no pit partition. if i load the pit file for the device it fails with Re-Partition operation failed. whats next to try? ive tried to flash stock, cwm, and twrp.
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

Help: phone in "recovery booting" loop, trying to flash-

I have a Samsung Galaxy S7. It went into a boot loop and then when tried to do factory reset it went into a "recovery booting" loop. Seems only possible to enter download mode. From reading the forums, it seems the only possible option is a flash. I have downloaded Odin 3.13, and the Samsung drivers.
I downloaded file : G930VVRU4CRE5 (which I think is the oreo firmware)
When I "start" the process, it fails:
phone has error : SW REV CHECK FAIL : [aboot] Fused > Binary 4
odin shows:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5219 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not sure where to go from here ? (do I need different firmware?)
Thank you for the assistance.
cgakdj21 said:
I have a Samsung Galaxy S7. It went into a boot loop and then when tried to do factory reset it went into a "recovery booting" loop. Seems only possible to enter download mode. From reading the forums, it seems the only possible option is a flash. I have downloaded Odin 3.13, and the Samsung drivers.
I downloaded file : G930VVRU4CRE5 (which I think is the oreo firmware)
When I "start" the process, it fails:
phone has error : SW REV CHECK FAIL : [aboot] Fused > Binary 4
odin shows:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5219 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not sure where to go from here ? (do I need different firmware?)
Thank you for the assistance.
Click to expand...
Click to collapse
You need to use the patched version of Odin and the firmware your using needs to be U4 or above Verizon which I think you already have.
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572

Cant flash any ROM in Samsung J7 pro

Hi ,
I cant flash any ROM in my Samsung J7 pro (SM - J730GM)
There is no ROM in the phone .
Tried TRWP
SHOWS - size of image is larger than target device
Tried ODIN-
SHOWS -
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3857 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NEED HELP
THANK YOU

Categories

Resources