Hi ,
I cant flash any ROM in my Samsung J7 pro (SM - J730GM)
There is no ROM in the phone .
Tried TRWP
SHOWS - size of image is larger than target device
Tried ODIN-
SHOWS -
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3857 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NEED HELP
THANK YOU
Related
Once I press start, everything goes fine until the last moments and it ends with an error...
Anyone else having this issue?
Is there a solution?
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What is the model no. of your S6 and what is your ROM?
Giancarlo456 said:
Once I press start, everything goes fine until the last moments and it ends with an error...
Anyone else having this issue?
Is there a solution?
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
do you have reactivation lock enabled in "find my mobile" security settings?
i had the same problem as you, disabling it allowed me to flash in Odin
jaysim said:
do you have reactivation lock enabled in "find my mobile" security settings?
i had the same problem as you, disabling it allowed me to flash in Odin
Click to expand...
Click to collapse
Yes I have it disabled, still can't flash a firmware...
hello anybody
i want downgrade g920f 5.1.1 to 5.0.2 but the odin software say error :
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You can't downgrade to 5.0.2
Not possible to downgrade
Hey guys my s7 is stuck on the "Please use Samsung switch emergency recovery" when I try to turn it on. I've tried flashing it back to stock using odin but I keep getting this error. My phone is the G930T model and the frp lock is on. I've tried different odin versions too.
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
hello, make that it's easy
https://www.youtube.com/watch?v=y8AZyalTf5Y
kgmaybe said:
Hey guys my s7 is stuck on the "Please use Samsung switch emergency recovery" when I try to turn it on. I've tried flashing it back to stock using odin but I keep getting this error. My phone is the G930T model and the frp lock is on. I've tried different odin versions too.
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
I've had that problem. The really easy way to fix this is to just flash TWRP through Odin.
Have you tried to do what it told you to do and use Smart Switch? If it doesn't work, you could try to initialize using Smart Switch.
I have a Samsung Galaxy S7. It went into a boot loop and then when tried to do factory reset it went into a "recovery booting" loop. Seems only possible to enter download mode. From reading the forums, it seems the only possible option is a flash. I have downloaded Odin 3.13, and the Samsung drivers.
I downloaded file : G930VVRU4CRE5 (which I think is the oreo firmware)
When I "start" the process, it fails:
phone has error : SW REV CHECK FAIL : [aboot] Fused > Binary 4
odin shows:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5219 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not sure where to go from here ? (do I need different firmware?)
Thank you for the assistance.
cgakdj21 said:
I have a Samsung Galaxy S7. It went into a boot loop and then when tried to do factory reset it went into a "recovery booting" loop. Seems only possible to enter download mode. From reading the forums, it seems the only possible option is a flash. I have downloaded Odin 3.13, and the Samsung drivers.
I downloaded file : G930VVRU4CRE5 (which I think is the oreo firmware)
When I "start" the process, it fails:
phone has error : SW REV CHECK FAIL : [aboot] Fused > Binary 4
odin shows:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5219 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not sure where to go from here ? (do I need different firmware?)
Thank you for the assistance.
Click to expand...
Click to collapse
You need to use the patched version of Odin and the firmware your using needs to be U4 or above Verizon which I think you already have.
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Hey,
Here is the error message I have trying to flash my samsung J600FN with Odin.
Maybe someone can help !
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 3990 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> Unassigned file
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)