Hello,
I recently borrowed my roommate's Verizon S4 because my phone broke. I rooted it because I have a different provider.
However, in my root addicted mind-set, I decided to get a custom ROM installed and so I tried to download recovery. This phone was running 5.0.1.
Upon downloading a recovery, the phone soft-bricked. It shows the Samsung logo with a wrench, and makes an error message when attempting to boot.
I tried using Odin to flash the stock firmware, but I kept getting the following error:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've searched long and far and have yet to find a solution. I know that the reason for this issue is most likely due to the 5.0.1. build, but I was hoping that maybe something had developed in the last few months.
Any and all help is appreciated.
Also, I am not able to boot into recovery, but I am able to boot into download mode - I also reinstalled the Samsung drivers, and am using Odin 10.6. I tried using the ME7 firmware, but that didn't lead to much either.
I recently found a Verizon Software Assistant file and my phone won't be recognized on the application. Not sure what next steps are. I posted on reddit too, and no luck there either.
shivpaulchadha said:
Hello,
I recently borrowed my roommate's Verizon S4 because my phone broke. I rooted it because I have a different provider.
However, in my root addicted mind-set, I decided to get a custom ROM installed and so I tried to download recovery. This phone was running 5.0.1.
Upon downloading a recovery, the phone soft-bricked. It shows the Samsung logo with a wrench, and makes an error message when attempting to boot.
I tried using Odin to flash the stock firmware, but I kept getting the following error:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've searched long and far and have yet to find a solution. I know that the reason for this issue is most likely due to the 5.0.1. build, but I was hoping that maybe something had developed in the last few months.
Any and all help is appreciated.
Also, I am not able to boot into recovery, but I am able to boot into download mode - I also reinstalled the Samsung drivers, and am using Odin 10.6. I tried using the ME7 firmware, but that didn't lead to much either.
I recently found a Verizon Software Assistant file and my phone won't be recognized on the application. Not sure what next steps are. I posted on reddit too, and no luck there either.
Click to expand...
Click to collapse
Hi shivpaulchadha
Thanks you for using XDA Assist.
I see you already posted in the correct forum before here. Could you please "bump" your thread up for it could be noticed by others users? I'm sure our experts in there will be able to tackle the issue.
Nice regards and good luck.
.
Related
I recently tried to unroot my Galaxy Note 10.1 SCH-I925. When I tried to flash the stock firmware on it I get the following:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tired almost every piece of firmware I could find but I have no success . I am still kinda new to flashing firmware but this is my only failure so this has got me stuck. Is there anyone out there with a solution or should sent it to a professional
i have the same problem if you find solution please advice
Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
re: verizon odin flash issues
Sayunoi said:
Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
Click to expand...
Click to collapse
The first thing I would suggest is to go to the Verizon xda
forum in order to get the best help and useful suggestions.
The correct xda forum is located here:
https://forum.xda-developers.com/verizon-galaxy-s7
Good luck, have a great day!
Did you install the correct USB drivers and what system do you use?
Also, by any chance, did you try different USB cables / ports? Sometimes the original cable is kinda funky on USB connections.
Sayunoi said:
Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
Click to expand...
Click to collapse
I ised to have this prob when trying to flash wrong firmware or trying to downgrade
Tekkpriest said:
Did you install the correct USB drivers and what system do you use?
Also, by any chance, did you try different USB cables / ports? Sometimes the original cable is kinda funky on USB connections.
Click to expand...
Click to collapse
I used windows, and I haven't tried other ports yet. I'll let you know.
re: wrong forum
TheMadScientist420 said:
I ised to have this prob when trying to flash wrong firmware or trying to downgrade
Click to expand...
Click to collapse
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Misterjunky said:
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Click to expand...
Click to collapse
I did flash the right firmware, the galaxy S7 Verizon firmware found
https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
I redid the post in the Verizon xda forum with no response.
9
Misterjunky said:
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Click to expand...
Click to collapse
Not i. I was just tryin to answer some questions. My issue came from a qfuse trying to downgrade on anti rollbck. Again tryin to help people out. Issues on pst devices ive had
So I have the AT&T variant of the Samsung Galaxy S7 (SM-G930A). I had installed root using a tutorial I found on these forums and everything went great for months. I started getting some errors after automatic updates ran (the Play Store kept crashing) so I tried to flash back to the stock firmware. Doing this, I ended up at the "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software" page.
I've tried using Smart Switch, but the application tells me that my device is unsupported and entering my model and serial numbers into the software just causes it (the smart switch app) to crash.
On the Android Recovery screen, I can see that I have the G930AUCS2APH1 firmware running Android 6.0.1. I believe I have found the original stock firmware for this version here: https://forum.xda-developers.com/at...rmware-stock-sm-g930a-ph1-odin-files-t3458890
But whenever I try to flash anything other than CP to my phone in Odin, I end up with a FAIL! (Auth) error.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried using different USB ports and cables, as well as a few different firmwares (admittedly, even some that are not the PH1 update) but all end up with the same result.
Can anyone help me out? I believe I'm doing everything right but I cannot get my phone up and running again for the life of me.
OKAY so I believe I fixed the problem before anyone could get to this so this is for anyone that stumbles across this thread. I was able to successfully flash the PK1 update to my phone. I found the firmware here: https://drive.google.com/drive/folders/0B_lsL4sQwjajY2dxSkFjYmw4OGM
Just flashing the AP package seems to have worked fine.
So I'm trying to reset my phone(regular S8 but hoping if someone else had the same issue the fix might be the same) as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
ACardAttack said:
So I'm trying to reset my phone(regular S8 but hoping if someone else had the same issue the fix might be the same) as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
Click to expand...
Click to collapse
You are trying to downgrade from bootloader 5 to 4 (see here Device 5, Binary: 4 )which it wont let you. download firmware with bootloader 5
Here's what I did from start
Installed TWRP
installed lineage 17.1 with gapps and magisk
Removed everything and installed pixel experience 10 herolte
Volte was not working in both
So I downloaded the stock firmware (latest) according to my model - G930FD INS and tried to flash it through odin as per steps
But
The log gets stuck on 'SYSTEM.IMG' and after a while fails to flash the phone.
I just want to get my stock firmware back so I can start my calls and msgs.
Please help.
I didn't used anything different just clean flashed my phone.
I have the latest firmware for stock
log file
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4077 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Solved
As the problem was, while flashing with Odin it wasn't showing any error and was only giving out output as Fail, turns out it was a port problem, I changed my USB port and cable and it worked fine. My friend also gave me advice to try it on another laptop because this happens sometimes and sometimes it works.
So if your log is something similar to what I have posted try downloading the latest Odin and changing ports or PCs, if nothing then create an id here and start a thread somebody will help you out for sure.
Peace