Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
re: verizon odin flash issues
Sayunoi said:
Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
Click to expand...
Click to collapse
The first thing I would suggest is to go to the Verizon xda
forum in order to get the best help and useful suggestions.
The correct xda forum is located here:
https://forum.xda-developers.com/verizon-galaxy-s7
Good luck, have a great day!
Did you install the correct USB drivers and what system do you use?
Also, by any chance, did you try different USB cables / ports? Sometimes the original cable is kinda funky on USB connections.
Sayunoi said:
Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
Click to expand...
Click to collapse
I ised to have this prob when trying to flash wrong firmware or trying to downgrade
Tekkpriest said:
Did you install the correct USB drivers and what system do you use?
Also, by any chance, did you try different USB cables / ports? Sometimes the original cable is kinda funky on USB connections.
Click to expand...
Click to collapse
I used windows, and I haven't tried other ports yet. I'll let you know.
re: wrong forum
TheMadScientist420 said:
I ised to have this prob when trying to flash wrong firmware or trying to downgrade
Click to expand...
Click to collapse
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Misterjunky said:
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Click to expand...
Click to collapse
I did flash the right firmware, the galaxy S7 Verizon firmware found
https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
I redid the post in the Verizon xda forum with no response.
9
Misterjunky said:
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Click to expand...
Click to collapse
Not i. I was just tryin to answer some questions. My issue came from a qfuse trying to downgrade on anti rollbck. Again tryin to help people out. Issues on pst devices ive had
Related
I recently tried to unroot my Galaxy Note 10.1 SCH-I925. When I tried to flash the stock firmware on it I get the following:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tired almost every piece of firmware I could find but I have no success . I am still kinda new to flashing firmware but this is my only failure so this has got me stuck. Is there anyone out there with a solution or should sent it to a professional
i have the same problem if you find solution please advice
Hello,
I recently borrowed my roommate's Verizon S4 because my phone broke. I rooted it because I have a different provider.
However, in my root addicted mind-set, I decided to get a custom ROM installed and so I tried to download recovery. This phone was running 5.0.1.
Upon downloading a recovery, the phone soft-bricked. It shows the Samsung logo with a wrench, and makes an error message when attempting to boot.
I tried using Odin to flash the stock firmware, but I kept getting the following error:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've searched long and far and have yet to find a solution. I know that the reason for this issue is most likely due to the 5.0.1. build, but I was hoping that maybe something had developed in the last few months.
Any and all help is appreciated.
Also, I am not able to boot into recovery, but I am able to boot into download mode - I also reinstalled the Samsung drivers, and am using Odin 10.6. I tried using the ME7 firmware, but that didn't lead to much either.
I recently found a Verizon Software Assistant file and my phone won't be recognized on the application. Not sure what next steps are. I posted on reddit too, and no luck there either.
shivpaulchadha said:
Hello,
I recently borrowed my roommate's Verizon S4 because my phone broke. I rooted it because I have a different provider.
However, in my root addicted mind-set, I decided to get a custom ROM installed and so I tried to download recovery. This phone was running 5.0.1.
Upon downloading a recovery, the phone soft-bricked. It shows the Samsung logo with a wrench, and makes an error message when attempting to boot.
I tried using Odin to flash the stock firmware, but I kept getting the following error:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've searched long and far and have yet to find a solution. I know that the reason for this issue is most likely due to the 5.0.1. build, but I was hoping that maybe something had developed in the last few months.
Any and all help is appreciated.
Also, I am not able to boot into recovery, but I am able to boot into download mode - I also reinstalled the Samsung drivers, and am using Odin 10.6. I tried using the ME7 firmware, but that didn't lead to much either.
I recently found a Verizon Software Assistant file and my phone won't be recognized on the application. Not sure what next steps are. I posted on reddit too, and no luck there either.
Click to expand...
Click to collapse
Hi shivpaulchadha
Thanks you for using XDA Assist.
I see you already posted in the correct forum before here. Could you please "bump" your thread up for it could be noticed by others users? I'm sure our experts in there will be able to tackle the issue.
Nice regards and good luck.
.
Hey guys my s7 is stuck on the "Please use Samsung switch emergency recovery" when I try to turn it on. I've tried flashing it back to stock using odin but I keep getting this error. My phone is the G930T model and the frp lock is on. I've tried different odin versions too.
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
hello, make that it's easy
https://www.youtube.com/watch?v=y8AZyalTf5Y
kgmaybe said:
Hey guys my s7 is stuck on the "Please use Samsung switch emergency recovery" when I try to turn it on. I've tried flashing it back to stock using odin but I keep getting this error. My phone is the G930T model and the frp lock is on. I've tried different odin versions too.
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
I've had that problem. The really easy way to fix this is to just flash TWRP through Odin.
Have you tried to do what it told you to do and use Smart Switch? If it doesn't work, you could try to initialize using Smart Switch.
When I try to go back to stock firmware i get this error in odin.
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Make sure you are using the correct usb cord.... also that you have the correct firmware.
Try using a different version of odin.....
check computer drivers and try again
Galaxy J727P
CodyKuest said:
When I try to go back to stock firmware i get this error in odin.
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Make shore you are using the right firmware version that you were last on !
XxTeXx07xX said:
Make sure you are using the correct usb cord.... also that you have the correct firmware.
Try using a different version of odin.....
check computer drivers and try again
Click to expand...
Click to collapse
How could I check my firmware when I cant boot up? Or could you link me the latest one?
Galaxy J727P
CodyKuest said:
How could I check my firmware when I cant boot up? Or could you link me the latest one?
Click to expand...
Click to collapse
Just put the latest firmware J727PVPS3ARA1 YOU you can find it on my thread next update stock DEODEXED at the bottom of the first post !
The .pit file, do I need it?
peter couniaz said:
Just put the latest firmware J727PVPS3ARA1 YOU you can find it on my thread next update stock DEODEXED at the bottom of the first post !
Click to expand...
Click to collapse
Do I need the .pit file?
Thanks!
peter couniaz said:
Just put the latest firmware J727PVPS3ARA1 YOU you can find it on my thread next update stock DEODEXED at the bottom of the first post !
Click to expand...
Click to collapse
Yes! Thanks man!
Stuck
peter couniaz said:
Just put the latest firmware J727PVPS3ARA1 YOU you can find it on my thread next update stock DEODEXED at the bottom of the first post !
Click to expand...
Click to collapse
Everything worked fine, but now Im stuck on LTE PLUS screen. I have sprint
Virgin mobile Galaxy J727P
CodyKuest said:
Everything worked fine, but now Im stuck on LTE PLUS screen. I have sprint
Click to expand...
Click to collapse
What carrier are you on ?
---------- Post added at 01:00 PM ---------- Previous post was at 12:51 PM ----------
CodyKuest said:
Everything worked fine, but now Im stuck on LTE PLUS screen. I have sprint
Click to expand...
Click to collapse
What carrier are you on ? I'll see if I can help !
Getting this when trying to flash stock rom with odin on my j727p
Code:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Galaxy J727P
its4ma said:
Getting this when trying to flash stock rom with odin on my j727p
Code:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What did you try backdate the firmware your were on ?
peter couniaz said:
What did you try backdate the firmware your were on ?
Click to expand...
Click to collapse
I don't know man. My phone is google locked. I'm just trying to get back into my J7 Perx.
Try smart switch.
jonny30bass said:
Try smart switch.
Click to expand...
Click to collapse
Oddly, says unsupported device.
jonny30bass said:
Try smart switch.
Click to expand...
Click to collapse
And no, that's not the issue. I just wanna bypass the google lock on a j727p boost mobile.
Galaxy J727P
its4ma said:
And no, that's not the issue. I just wanna bypass the google lock on a j727p boost mobile.
Click to expand...
Click to collapse
I don't know if this will help you at all but here is a link !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219
peter couniaz said:
I don't know if this will help you at all but here is a link !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219
Click to expand...
Click to collapse
Nope. Won't flash. Tells me Fused 2 Binary 1
Galaxy J727P
its4ma said:
Nope. Won't flash. Tells me Fused 2 Binary 1
Click to expand...
Click to collapse
Sorry I couldn't be more help !