Getting this when trying to flash stock rom with odin on my j727p
Code:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Galaxy J727P
its4ma said:
Getting this when trying to flash stock rom with odin on my j727p
Code:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What did you try backdate the firmware your were on ?
peter couniaz said:
What did you try backdate the firmware your were on ?
Click to expand...
Click to collapse
I don't know man. My phone is google locked. I'm just trying to get back into my J7 Perx.
Try smart switch.
jonny30bass said:
Try smart switch.
Click to expand...
Click to collapse
Oddly, says unsupported device.
jonny30bass said:
Try smart switch.
Click to expand...
Click to collapse
And no, that's not the issue. I just wanna bypass the google lock on a j727p boost mobile.
Galaxy J727P
its4ma said:
And no, that's not the issue. I just wanna bypass the google lock on a j727p boost mobile.
Click to expand...
Click to collapse
I don't know if this will help you at all but here is a link !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219
peter couniaz said:
I don't know if this will help you at all but here is a link !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219
Click to expand...
Click to collapse
Nope. Won't flash. Tells me Fused 2 Binary 1
Galaxy J727P
its4ma said:
Nope. Won't flash. Tells me Fused 2 Binary 1
Click to expand...
Click to collapse
Sorry I couldn't be more help !
Related
Once I press start, everything goes fine until the last moments and it ends with an error...
Anyone else having this issue?
Is there a solution?
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What is the model no. of your S6 and what is your ROM?
Giancarlo456 said:
Once I press start, everything goes fine until the last moments and it ends with an error...
Anyone else having this issue?
Is there a solution?
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
do you have reactivation lock enabled in "find my mobile" security settings?
i had the same problem as you, disabling it allowed me to flash in Odin
jaysim said:
do you have reactivation lock enabled in "find my mobile" security settings?
i had the same problem as you, disabling it allowed me to flash in Odin
Click to expand...
Click to collapse
Yes I have it disabled, still can't flash a firmware...
Hey guys my s7 is stuck on the "Please use Samsung switch emergency recovery" when I try to turn it on. I've tried flashing it back to stock using odin but I keep getting this error. My phone is the G930T model and the frp lock is on. I've tried different odin versions too.
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
hello, make that it's easy
https://www.youtube.com/watch?v=y8AZyalTf5Y
kgmaybe said:
Hey guys my s7 is stuck on the "Please use Samsung switch emergency recovery" when I try to turn it on. I've tried flashing it back to stock using odin but I keep getting this error. My phone is the G930T model and the frp lock is on. I've tried different odin versions too.
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
I've had that problem. The really easy way to fix this is to just flash TWRP through Odin.
Have you tried to do what it told you to do and use Smart Switch? If it doesn't work, you could try to initialize using Smart Switch.
Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
re: verizon odin flash issues
Sayunoi said:
Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
Click to expand...
Click to collapse
The first thing I would suggest is to go to the Verizon xda
forum in order to get the best help and useful suggestions.
The correct xda forum is located here:
https://forum.xda-developers.com/verizon-galaxy-s7
Good luck, have a great day!
Did you install the correct USB drivers and what system do you use?
Also, by any chance, did you try different USB cables / ports? Sometimes the original cable is kinda funky on USB connections.
Sayunoi said:
Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
Click to expand...
Click to collapse
I ised to have this prob when trying to flash wrong firmware or trying to downgrade
Tekkpriest said:
Did you install the correct USB drivers and what system do you use?
Also, by any chance, did you try different USB cables / ports? Sometimes the original cable is kinda funky on USB connections.
Click to expand...
Click to collapse
I used windows, and I haven't tried other ports yet. I'll let you know.
re: wrong forum
TheMadScientist420 said:
I ised to have this prob when trying to flash wrong firmware or trying to downgrade
Click to expand...
Click to collapse
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Misterjunky said:
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Click to expand...
Click to collapse
I did flash the right firmware, the galaxy S7 Verizon firmware found
https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
I redid the post in the Verizon xda forum with no response.
9
Misterjunky said:
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Click to expand...
Click to collapse
Not i. I was just tryin to answer some questions. My issue came from a qfuse trying to downgrade on anti rollbck. Again tryin to help people out. Issues on pst devices ive had
Hi ,
I cant flash any ROM in my Samsung J7 pro (SM - J730GM)
There is no ROM in the phone .
Tried TRWP
SHOWS - size of image is larger than target device
Tried ODIN-
SHOWS -
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3857 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NEED HELP
THANK YOU
Samsung Galaxy J7 Prime
SM-G610F
Region-XSG
About 2 weeks ago my phone died dropping battery to 0%. And, after I plug the phone to charger, it started bootlooping.
I flashed the stock firmware using Odin and It was successful. I used the phone as normal until yesterday.
Yesterday, the battery died again dropping to 0 %. And.., the bootloop problem came up again.
So I tried to flash the stock firmware again using Odin.
But not like before, It Failed to flash
Phone says "Custom Binary (System) Blocked by FRP lock"
Odin Fails at 'cache.img' when I select 'HOME_CSC_OJV' file as the CSC
Here is the log..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
...And, If I select 'CSC_OJV' as the CSC file, It Fails at 'userdata.img'
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> userdata.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After forcing restart, The bluescreen comes up and it says,
"An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software"
But the Smart Switch Doesn't support my device
Please Help me to get my phone up and running....
Try Flash BL, AP, CP
then wipe date
windows4droid said:
Try Flash BL, AP, CP
then wipe date
Click to expand...
Click to collapse
Not workingg..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> userdata.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try flash combination firmware
windows4droid said:
Try flash combination firmware
Click to expand...
Click to collapse
Hello... Can you please explain that?..
Thank you
Chamuditha Heshan said:
Hello... Can you please explain that?..
Thank you
Click to expand...
Click to collapse
404.67 MB file on MEGA
mega.nz
Download combination firmware
then flash it