Database Info

Trouble flashing the T-Mobile Firmware on my MetroPCS S7

So, I know there are ways to flash different firmware on to each Galaxy S7, Metro and T-Mobile are pretty much the most similar of each version. What I'm trying to do is make it so my G S7 is stock T-Mobile so that I can update it to the Nougat Beta. I'm sort of impatient lol. Here's the errors I'm getting:
This one is in Odin and I'm using the modified version that I used originally to root my S7 which BTW is back to stock unrooted.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone shows this in RED:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: aboot
I'm not sure what the problem is, I have my drivers installed, I have debugging checked and I'm using an HTC usb cord only because they are better with data transfers than the stock Samsung cord in my experience. I'm not sure what I'm doing wrong.
Help? :fingers-crossed:

jawshdarnit said:
So, I know there are ways to flash different firmware on to each Galaxy S7, Metro and T-Mobile are pretty much the most similar of each version. What I'm trying to do is make it so my G S7 is stock T-Mobile so that I can update it to the Nougat Beta. I'm sort of impatient lol. Here's the errors I'm getting:
This one is in Odin and I'm using the modified version that I used originally to root my S7 which BTW is back to stock unrooted.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone shows this in RED:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: aboot
I'm not sure what the problem is, I have my drivers installed, I have debugging checked and I'm using an HTC usb cord only because they are better with data transfers than the stock Samsung cord in my experience. I'm not sure what I'm doing wrong.
Help? :fingers-crossed:
Click to expand...
Click to collapse
Use the unmodified version

Okay will do. I'll post again if any issues arise.

kitila said:
Use the unmodified version
Click to expand...
Click to collapse
Used the most up to date version and still getting same error message.

kitila said:
Use the unmodified version
Click to expand...
Click to collapse
I downloaded the zip file from sammobile and used the newest version of Odin and it worked! Thank you so much for your help sir! :good:

<ID:0/003> FAIL! (Auth) When trying to Flash Stock

Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.

re: verizon odin flash issues
Sayunoi said:
Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
Click to expand...
Click to collapse
The first thing I would suggest is to go to the Verizon xda
forum in order to get the best help and useful suggestions.
The correct xda forum is located here:
https://forum.xda-developers.com/verizon-galaxy-s7
Good luck, have a great day!

Did you install the correct USB drivers and what system do you use?
Also, by any chance, did you try different USB cables / ports? Sometimes the original cable is kinda funky on USB connections.

Sayunoi said:
Hi, when trying to flash my Verizon S7 back to stock (with the correct verizon files) I got this odin log
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When trying to exit I got the "Software Update Failed" and when trying to flash again it's just a stuck bar on my screen. Not sure what to do and I'm kinda of new to this but I'd appreciate any help.
Click to expand...
Click to collapse
I ised to have this prob when trying to flash wrong firmware or trying to downgrade

Tekkpriest said:
Did you install the correct USB drivers and what system do you use?
Also, by any chance, did you try different USB cables / ports? Sometimes the original cable is kinda funky on USB connections.
Click to expand...
Click to collapse
I used windows, and I haven't tried other ports yet. I'll let you know.

re: wrong forum
TheMadScientist420 said:
I ised to have this prob when trying to flash wrong firmware or trying to downgrade
Click to expand...
Click to collapse
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.

Misterjunky said:
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Click to expand...
Click to collapse
I did flash the right firmware, the galaxy S7 Verizon firmware found
https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
I redid the post in the Verizon xda forum with no response.

9
Misterjunky said:
The reason you were trying to flash the wrong firmware
is because you are and you were in the wrong forum.
This is not the Verizon xda forum.
Click to expand...
Click to collapse
Not i. I was just tryin to answer some questions. My issue came from a qfuse trying to downgrade on anti rollbck. Again tryin to help people out. Issues on pst devices ive had

Lost my baseband and IMEI on my j710fn

Hey!
I decided to install the Resurrection Remix rom on my Samsung J7 2016 (SM-J710FN). But after i flashed it I noticed my IMEI and baseband had disappeared. My phone doesn't recognize my SIM card and my cellular data no longer works. I didn't have a efs backup too. I might have wiped the system partition in my twrp recovery.
If you could help me I would really appreciate it.

get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)

RS.85243 said:
get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)
Click to expand...
Click to collapse
I tried to but each time I try to flash the bootloader an error comes out.

Ratbug said:
I tried to but each time I try to flash the bootloader an error comes out.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2

Ratbug said:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2
Click to expand...
Click to collapse
find the version of official firmware you had on it last, if you try to flash the boot with an older version of the firmware it will fail. Here is a link to the latest firmware for the 710fn from India https://drive.google.com/open?id=1f_C8REO2ZRwiqBegUGEnUer9DcWy9adR

if i try it this way i get an "PIT" error on my phone in ODIN MODE

Never mind. I took the phone to a Samsung shop and they fixed it.

i have the same problem and I can't find the right FW.
all i know is, that I previously had the last available OTA installed.
when trying to flash the FW given above, i get the error: secure check failed (pit)

I have the same problem now. I've tried many available firmware versions and none of them work. Is there anything I can do to make the phone usable again?

help me install stock rom

i messed up my device flashing this
i can't flash stock using odin
can't enter recovery
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2899 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please provide stock rom link and instructions to install
whenever i start the device i get RPMB PROVISIONED on top

anyone...please help
please provide me with firmware download links J710FN indian (MM-N)

What actually happened to your device?
---------- Post added at 05:46 AM ---------- Previous post was at 05:42 AM ----------
J710FN /J710FD /J710F Ver:3 Firmware
flashing error SOLVED and code working
LINK FOR GOOGLE DRIVE https://drive.google.com/file/d/0B6h_FxGqWuVkN3p4clVLYlZqZDg/view?usp=drivesdk
CLICK THANKS IF IT WORKED

Abhinav2005 said:
What actually happened to your device?
---------- Post added at 05:46 AM ---------- Previous post was at 05:42 AM ----------
J710FN /J710FD /J710F Ver:3 Firmware
flashing error SOLVED and code working
LINK FOR GOOGLE DRIVE https://drive.google.com/file/d/0B6h_FxGqWuVkN3p4clVLYlZqZDg/view?usp=drivesdk
CLICK THANKS IF IT WORKED
Click to expand...
Click to collapse
all the old firmware versions and other type varients won't even flash
thx for you reply
edit: fixed it by flashing new firmware on top of combination firmware
2018-01-29 India 7.0 J710FXXU4BRA1 J710FODD4BRA1

j727P

Getting this when trying to flash stock rom with odin on my j727p
Code:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Galaxy J727P
its4ma said:
Getting this when trying to flash stock rom with odin on my j727p
Code:
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What did you try backdate the firmware your were on ?

peter couniaz said:
What did you try backdate the firmware your were on ?
Click to expand...
Click to collapse
I don't know man. My phone is google locked. I'm just trying to get back into my J7 Perx.

Try smart switch.

jonny30bass said:
Try smart switch.
Click to expand...
Click to collapse
Oddly, says unsupported device.

jonny30bass said:
Try smart switch.
Click to expand...
Click to collapse
And no, that's not the issue. I just wanna bypass the google lock on a j727p boost mobile.

Galaxy J727P
its4ma said:
And no, that's not the issue. I just wanna bypass the google lock on a j727p boost mobile.
Click to expand...
Click to collapse
I don't know if this will help you at all but here is a link !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219

peter couniaz said:
I don't know if this will help you at all but here is a link !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219
Click to expand...
Click to collapse
Nope. Won't flash. Tells me Fused 2 Binary 1

Galaxy J727P
its4ma said:
Nope. Won't flash. Tells me Fused 2 Binary 1
Click to expand...
Click to collapse
Sorry I couldn't be more help !