So, I know there are ways to flash different firmware on to each Galaxy S7, Metro and T-Mobile are pretty much the most similar of each version. What I'm trying to do is make it so my G S7 is stock T-Mobile so that I can update it to the Nougat Beta. I'm sort of impatient lol. Here's the errors I'm getting:
This one is in Odin and I'm using the modified version that I used originally to root my S7 which BTW is back to stock unrooted.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone shows this in RED:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: aboot
I'm not sure what the problem is, I have my drivers installed, I have debugging checked and I'm using an HTC usb cord only because they are better with data transfers than the stock Samsung cord in my experience. I'm not sure what I'm doing wrong.
Help? :fingers-crossed:
jawshdarnit said:
So, I know there are ways to flash different firmware on to each Galaxy S7, Metro and T-Mobile are pretty much the most similar of each version. What I'm trying to do is make it so my G S7 is stock T-Mobile so that I can update it to the Nougat Beta. I'm sort of impatient lol. Here's the errors I'm getting:
This one is in Odin and I'm using the modified version that I used originally to root my S7 which BTW is back to stock unrooted.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone shows this in RED:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 1
[1]eMMC write fail: aboot
I'm not sure what the problem is, I have my drivers installed, I have debugging checked and I'm using an HTC usb cord only because they are better with data transfers than the stock Samsung cord in my experience. I'm not sure what I'm doing wrong.
Help? :fingers-crossed:
Click to expand...
Click to collapse
Use the unmodified version
Okay will do. I'll post again if any issues arise.
kitila said:
Use the unmodified version
Click to expand...
Click to collapse
Used the most up to date version and still getting same error message.
kitila said:
Use the unmodified version
Click to expand...
Click to collapse
I downloaded the zip file from sammobile and used the newest version of Odin and it worked! Thank you so much for your help sir! :good:
Related
By mistake I Flashed Philz touch recovery on my s4 i337 through a phone application "RASHR" and when i restarted my Phone it says
"System Software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest At&t store for help"
The I googled it and found that my phone is softbricked and I have to reflash the stock rom. Then i downloaded the stock roms I337UCUAMDB and I337UCUAMDL .
But while flashing them I get this
Log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
The phone displays this:
Start [224, 1440]
SV REV. CHECK FAIL : FUSED : 2, BINARY : 1
I get this message from both the above roms.
Please help!!!!! :crying: :crying: :crying:
Amisaini said:
By mistake I Flashed Philz touch recovery on my s4 i337 through a phone application "RASHR" and when i restarted my Phone it says
"System Software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest At&t store for help"
The I googled it and found that my phone is softbricked and I have to reflash the stock rom. Then i downloaded the stock roms I337UCUAMDB and I337UCUAMDL .
But while flashing them I get this
Log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
The phone displays this:
Start [224, 1440]
SV REV. CHECK FAIL : FUSED : 2, BINARY : 1
I get this message from both the above roms.
Please help!!!!! :crying: :crying: :crying:
Click to expand...
Click to collapse
At your service
What version of android were you on before, was it 4.3 or later touchwiz? also can you boot to recovery?
REMEMBER TO HIT THAT THANKS BUTTON IF I HELPED
odin 3.10 says this when i try to install firmware on my bricked s6 edge.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me.
Mate ur failed is at bootloader means u Trying to flash old bootloader on newer one then knox wont let u install it success so download the latest fw from sammobile firmweare then flash it again ok
Good luck,,
Hey guys,
I'm trying to root my S6 (Canada/Bell Provider/SM-G920W8) and running into the following issue,
Enabled Developer options and USB debugging
Downloaded CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Downloaded and installed the latest drivers
Turned off and back on into Download mode
Opened Odin3 v3.10 as Administrator
Selected AP and added CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Clicked start
and I'm getting the following from Odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not quite sure how fix the issue. Any help would be great.
Thanks
amirbehain said:
Hey guys,
I'm trying to root my S6 (Canada/Bell Provider/SM-G920W8) and running into the following issue,
Enabled Developer options and USB debugging
Downloaded CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Downloaded and installed the latest drivers
Turned off and back on into Download mode
Opened Odin3 v3.10 as Administrator
Selected AP and added CF-Auto-Root-zerofltebmc-zerofltebmc-smg920w8
Clicked start
and I'm getting the following from Odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not quite sure how fix the issue. Any help would be great.
Thanks
Click to expand...
Click to collapse
im having the same issue did you figure out how to fix it and root ?
Trying to root my galaxy Samsung s6 g920w8 ? Can anyone help ?
rootman81 said:
Trying to root my galaxy Samsung s6 g920w8 ? Can anyone help ?
Click to expand...
Click to collapse
have any of you tried Odin 3.13.1?
Hey,
I keep having issues with my S8+ that has never been rooted. I flashed it trying to fix an issue with my WiFi forgetting saved networks. If I turned off WiFi or rebooted my phone it forget all saved networks.
I used Samfirm and Odin 3.12.7 to flash it to the latest firmware AQJ4 and then did an OTA update that popped up. I'm still having the issue but keep getting a notification about "Unauthorized modifications, reboot".
Now, I can't even flash the phone anymore... I keep getting a Fail! (Auth) error when trying to flash BL, AP, or CSC... CP seems to work fine.
I've tried everythign I can find online but nothing helps... When in download mode I see:
FRP Lock is off
Warranty Voidis 0x0
System Status is Official
The one thing I've noticed is that my device shows Baseband version AQJ4 but my Build number is AQK3... Is that normal?
Any ideas?
Code:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> userdata.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hey!
I decided to install the Resurrection Remix rom on my Samsung J7 2016 (SM-J710FN). But after i flashed it I noticed my IMEI and baseband had disappeared. My phone doesn't recognize my SIM card and my cellular data no longer works. I didn't have a efs backup too. I might have wiped the system partition in my twrp recovery.
If you could help me I would really appreciate it.
get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)
RS.85243 said:
get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)
Click to expand...
Click to collapse
I tried to but each time I try to flash the bootloader an error comes out.
Ratbug said:
I tried to but each time I try to flash the bootloader an error comes out.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2
Ratbug said:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2
Click to expand...
Click to collapse
find the version of official firmware you had on it last, if you try to flash the boot with an older version of the firmware it will fail. Here is a link to the latest firmware for the 710fn from India https://drive.google.com/open?id=1f_C8REO2ZRwiqBegUGEnUer9DcWy9adR
if i try it this way i get an "PIT" error on my phone in ODIN MODE
Never mind. I took the phone to a Samsung shop and they fixed it.
i have the same problem and I can't find the right FW.
all i know is, that I previously had the last available OTA installed.
when trying to flash the FW given above, i get the error: secure check failed (pit)
I have the same problem now. I've tried many available firmware versions and none of them work. Is there anything I can do to make the phone usable again?