Charging port - OnePlus 6 Questions & Answers

I'm a kid with a new toy, just received my 6 today...sorry for so many Qs.
Is the charging port a bit rough? its not that easy/fluid to insert the plug into the charging port on my new 6, is this normal?
Thanks!

Not at all a problem for me, USB -c goes in nice and dmooth,are you using the charger that came with the phone ?

Original cable goes in pretty smoothly here. But when I got a magnetic type c cable, it was quite difficult to plug it in. After couple of days it became smooth like the original cable.
I'd say it's a benefit though. I've had a couple of micro usb phones where cable used to fall out all the time. So a tighter port/cable is a good thing.

Yes using the charger that came with it. It just a bit rough going in. My old phone an s7 was very smooth in comparison and has a satisfying click once fully inserted. Here not so much.
Sent from my ONEPLUS A6003 using Tapatalk

ProtoDeVNan0 said:
Original cable goes in pretty smoothly here. But when I got a magnetic type c cable, it was quite difficult to plug it in. After couple of days it became smooth like the original cable.
I'd say it's a benefit though. I've had a couple of micro usb phones where cable used to fall out all the time. So a tighter port/cable is a good thing.
Click to expand...
Click to collapse
Yes, definitely,you don't want it to be sliding out, I think mine clicks in,it's secure in there,
Don't think the OP has anything to worry about

Thanks. Maybe needs to broken in a bit, I've only connected it twice so far
Sent from my ONEPLUS A6003 using Tapatalk

Related

[Q] Help it won't charge

Just got the battery warning so I plugged it in and to my surprise nothing happened ... checked the plug, restarted.. it just won't charge . When I turn screen off and plug it in the screen turns on but it doesn't charge .. is it busted?
Sent from my Nexus S using XDA App
Are you plugged into a wall socket? If you are trying to charge through USB from a computer, it won't charge unless in sleep mode. Even then it will charge slowly.
Plugged into a wall socket atm.. iv tried from a computer I don't get a charging icon like I used 2
Sent from my Nexus S using XDA App
My was doing the same,I have try different wall sockets in the house and one work ,so keep trying.
Sent from my HERO200 using XDA App
One works? What how's that lol
Sent from my Nexus S using XDA App
this will sounds bad but.... check the usb connection to the plug, as the way its made you can actully push the usb into the plug the wrong way around....
Tried all plugs don't work and yes its the right way round
Sent from my Nexus S using XDA App
when I plug it into a comp it comes up with the USB stuff like Asus sync .. just not charge..
Sent from my Nexus S using XDA App
Anyone else had this issue
Sent from my Nexus S using XDA App
Just got it from Amazon and I have the same issue and still not able to figure out how to fix it. My Transformer is lying there without charging. Planning to return it to Amazon.
Right I just got mine working... try this pull the plug apart and put it back together now squueze them together as tight as you can and try that. Its working for me now ..
Sent from my Nexus S using XDA App
It just doesn't work. How is the usb cable connected to your adapter? It just gets in both ways.
Can you send me a picture of how the three parts are fit into each other?
its only suppose to go in one way, just like conncting any USB devices. But tried that, dissemble the adaptor and put them together, it actually happened to me once too, did exactly that and everything fixed. Remember you gotta squeeze pretty hard to put the two pieces together.
Thanks guys, its working. But this is ridiculous, you have to do a dumbbell roll to fix battery plug
i cant get it too charge and i just got it in the mail. why the hell it even come with this wack ass plug in the first place. what a horrible first impression!
I suggest you dont even use it, its dangerous. Mine melted the first day I got it. I went to bestbuy and got a replacement that works great. It charges at 11 volts/1.5 amps
http://www.bestbuy.com/site/Dynex&#...d=9462949&st=dynex ultimate charger&cp=1&lp=1
italia0101 said:
Right I just got mine working... try this pull the plug apart and put it back together now squueze them together as tight as you can and try that. Its working for me now ..
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Yes, I had this problem with mine too.
It seems to be a common issue:
http://forum.xda-developers.com/showthread.php?t=1075475
D_Czap said:
I suggest you dont even use it, its dangerous. Mine melted the first day I got it. I went to bestbuy and got a replacement that works great. It charges at 11 volts/1.5 amps
http://www.bestbuy.com/site/Dynex&#...d=9462949&st=dynex ultimate charger&cp=1&lp=1
Click to expand...
Click to collapse
This seriously works?
I just hope the voltage is right... I've tried different adapters for my phone and then my phone started acting weird (like it didn't take calls and would freeze at times). Replaced the adapter and it returned to normal again.
My TF adapter also gets really hot when charging.
Thanks for the recommendation.
I put some petroleum jelly on the metal prongs and smashed it on the counter a few times AFTER snapping it in.
Unfortunately I did them at the same time and didn't test in between so i don't know which if either or possibly both fixed it but mine is finally ****ing charging.
What a headache. I'm really bothered by ASUS for issuing such a faulty component.
I'm probably going to pick up that dynex tomorrow, because I just KNOW this will break again and mysteriously lodge itself into my drywall.
I just had the problem and discovered that the 5 forward pins on the power adapter are apparently quite easily deformed.
The charger is dual output, 5v and 15v.They use a USB3 connector, with the 15v quick charge output on those pins. I expect that they use the old USB 2 pins behind them to supply 5v for a slow charge, and PC data/charge connection.
Just prior to this, I had tried using an extension USB3 cable on it, so that I could use it while charging, and I suspect that was just enough to deform a couple of the 5 pins in the charger, and I got no charge at all from it, even after putting it back to normal. After an hour, the charger was still cold, and no indication of charging on either the tablet or with the table and keyboard attached.
With a good light and strong magnifier, I could see that a couple of the pins (of the 5 in the front) looked a bit recessed compared to the others, and carefully used the tip of a very fine needle to lift all of them just slightly. Having done that, the charger came to life when I plugged it back in, and the TF is indicating that it is charging.
I don't know how solid or permanent the fix will be, but it is working for me now.

Broken Charging Port

Hi All
I was given this MT4GS about three months ago by a friend. All of the sudden it stopped taking a charge. At first, if i held the charger the right way, it might get a little charge, but now I'm getting nothing. So, I'm alternating between a couple Anker batteries and one stock, hoping someone has had this repaired (and that it wont' cost me a ton of money). Did anyone else have this problem?
Thanks
that sounds more like a usb cable problem than charger port... have you tried other usb cables?
my chargers go bad in about 4 months...I noticed they get really loose in my device. I got this cable and it still works (its been around 6 months) http://www.amazon.com/gp/product/B004GF8TIK/ref=oh_details_o02_s00_i00 (this is just the cable, keep the power plug from your stock charger)
xmc wildchild22 said:
my chargers go bad in about 4 months...I noticed they get really loose in my device. I got this cable and it still works (its been around 6 months) http://www.amazon.com/gp/product/B004GF8TIK/ref=oh_details_o02_s00_i00 (this is just the cable, keep the power plug from your stock charger)
Click to expand...
Click to collapse
I thought i was the only one whos charger went dead like that, seems like the 2 hooks go flat after a while
Sent from my HTC MyTouch 4G Slide using Tapatalk 2
That's the one bad thing about micro usb. It's the standard port for all android phones now, but it's very small, and if you're not careful it can break easily
My MT4G Slide recently started to exhibit this problem. The original cable that came with the phone still works perfectly fine. Unfortunately all my other cables have stopped working. I'll order the cable in the thread and hopefully it will work fine.
Kinda annoying cause now my car and bedside chargers are useless.
Almost 99% of the time will be the cable. I had to replace mine 4 times in one year.
Sent from my myTouch_4G_Slide using xda app-developers app
h3ktyk said:
Almost 99% of the time will be the cable. I had to replace mine 4 times in one year.
Click to expand...
Click to collapse
you might check out this video:
http://www.youtube.com/watch?v=yjnXcFG3674
this guy shows how you can use a needle to 'clean out' the port, because sometimes lint gets wedged down in and prevents the cord from making good contact.
And after you've cleaned it out, I would get something like this to prevent it from happening again
http://www.topicovers.com/products/micro-usb-port-cover
Or clean all the lint out of your pockets!
Sent from my myTouch_4G_Slide using xda app-developers app
So yea that cable works okay. Still not perfect though but better than nothing.
I think one of the pins is just bent down and I don't have pliers so small that I could pull them back up. Plus it's hard to see.
Has nothing to do with the cable. All with the port. The cables all work perfectly fine on other devices.

Charger?

Ok, I've tried to search the net before posting but I can't find anything. I have no idea how to use this charger, the actual wire part on the end isn't a usb plug to go into the plug part, it's like an over sized iphone 5 type deal. What do I do as I tried to put it in the plug but didn't want to force it?
Hold charger facing 1+ logo up.
Hold USB cable with the gold-plated contacts facing up
Now push USB cable into Charger.
Is it so difficult?
You put the angled end into the base unit on the side that has the red one.
Sent from my One using XDA Premium 4 mobile app
Wow such a silly thread hahahahahahahahahahaha
oh lord, its the same as a usual charger
Wooooooooowwwwee
Sent from my One using Tapatalk
C-4Nati said:
Ok, I've tried to search the net before posting but I can't find anything. I have no idea how to use this charger, the actual wire part on the end isn't a usb plug to go into the plug part, it's like an over sized iphone 5 type deal. What do I do as I tried to put it in the plug but didn't want to force it?
Click to expand...
Click to collapse
I THINK you talk about the cable not looking like your average USB cable, correct?
While it's a rather uncommon format, I've seen several USB thumb drives in this rather strange format, it fits a normal USB-port perfectly.
The only downside is that you may be able to plug it in the wrong way - resulting in no juice and no data.
Don't like the charger that comes with the OPO the uk adaptor makes it look awful and sticks out a lot. I am going to use my old HTC adaptor that has USB. Currently using my blackberry charger but it seems to be taking ages.
I know this is to do with voltage or whatever, can someone with more knowledge tell me what volts/amps the OPO charger is compaired to other USB AC chargers?
paul211b said:
Don't like the charger that comes with the OPO the uk adaptor makes it look awful and sticks out a lot. I am going to use my old HTC adaptor that has USB. Currently using my blackberry charger but it seems to be taking ages.
I know this is to do with voltage or whatever, can someone with more knowledge tell me what volts/amps the OPO charger is compaired to other USB AC chargers?
Click to expand...
Click to collapse
The OPO Charger has an output of 2Amps. Quick charging..
Likely your older Blackberry chargers have an output and slower charge rate because it is 0.8A or 800mAh
C-4Nati said:
Ok, I've tried to search the net before posting but I can't find anything. I have no idea how to use this charger, the actual wire part on the end isn't a usb plug to go into the plug part, it's like an over sized iphone 5 type deal. What do I do as I tried to put it in the plug but didn't want to force it?
Click to expand...
Click to collapse
Haahaha, don't be worry man I had the same problem when I first got mine. I was just being too cautious, just push the little bugger into your device . In fact I was so cautious i actually put a support ticket in, when I realized i just didn't push the charger piece in all the way i felt pretty stupid.

[Review] Choetech USB C Charging brick (lots of pics)

Yet another review for a charger. I was provided this charger at a heavy discount (not free) for an unbiased review.
UPDATE: Use code 6SLDGOIQ to get $6 off the charger from amazon, below. I don't know how many times this code will work, but it was provided by the Choetech rep that provided the charger to me. Comment here whether or not the code works for you please.
Get it here: http://www.amazon.com/gp/product/B0...etech usb c&qid=1452477270&ref_=sr_1_4&sr=8-4
Pros:
- rapidly charges Nexus 6P without issue (peak current of 2920mA according to Ampere) while using Choetech USB C cable
- packaging is mostly recyclable (except the polymer pouch)
- supports QC 2.0 tech (which I couldn't test because I don't have any devices to utilize this function)
Cons:
- charger heats up to 141*F whole charging the 6p, whole the Google brick only heats up to 94*F under the same conditions
Other thoughts:
- size is SLIGHTLY larger than the included Nexus 6P charging brick (see pics)
Would I buy it again: absolutely
Like the review? Click the button. Questions, comments, concerns? Post em here!
Check OP for $6 off code. I can't verify if it works, but it was provided by the Choetech rep. If it doesn't work, let me know and I'll remove it. Hope you guys can take advantage of it. Good charger [emoji106]
Sent from my Nexus 6P using Tapatalk
How hot does it get when charging? I just got mine and have noticed it gets really hot when charging. Much hotter than the OEM charger. Also, with the 2m c to c cable they make I have only seen a max of about 1850ma when the OEM charger was pulling 2950ma when I switched to it to see. Is it possible I got a bad unit?
Sent from my Nexus 6P
dgwood12 said:
How hot does it get when charging? I just got mine and have noticed it gets really hot when charging. Much hotter than the OEM charger. Also, with the 2m c to c cable they make I have only seen a max of about 1850ma when the OEM charger was pulling 2950ma when I switched to it to see. Is it possible I got a bad unit?
Sent from my Nexus 6P
Click to expand...
Click to collapse
I definitely had closer to 3A charge rate with their 2m cable. I never noticed if it overheats or not. I'll charge my phone later tonight for half an hour and see if it heats up and report back
Sent from my Nexus 6P using Tapatalk
rice923 said:
I definitely had closer to 3A charge rate with their included cable. I never noticed if it overheats or not. I'll charge my phone later tonight for half an hour and see if it heats up and report back
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
OK. I'm thinking maybe something is up with the one I got? I have their 2 meter cable and got no where near 3A. Did yours come with a cable? Mine had only a charger in the box. Thanks!
Sent from my Nexus 6P
dgwood12 said:
OK. I'm thinking maybe something is up with the one I got? I have their 2 meter cable and got no where near 3A. Did yours come with a cable? Mine had only a charger in the box. Thanks!
Sent from my Nexus 6P
Click to expand...
Click to collapse
Charger and cable were separate items. I also use the 2m cable
Edit: charged the phone with Choetech charger and Choetech 2m cable from 6% up to 33%. Charging brick had a temperature of 141*F according to a handheld IR thermometer.
Edit 2: Charging with Google brick and Choetech 2m cable from 33%to 67%. Charging brick had a temperature of 94*F according to a handheld IR thermometer.
Sent from my Nexus 6P using Tapatalk
OP edited to reflect heating comparison.
My 6p was able to charge at the proper 3A current using the Choetech charger.
Sent from my Nexus 6P using Tapatalk
rice923 said:
Charger and cable were separate items. I also use the 2m cable
Edit: charged the phone with Choetech charger and Choetech 2m cable from 6% up to 33%. Charging brick had a temperature of 141*F according to a handheld IR thermometer.
Edit 2: Charging with Google brick and Choetech 2m cable from 33%to 67%. Charging brick had a temperature of 94*F according to a handheld IR thermometer.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
That is quite a bit hotter than the OEM charger. Thanks for checking this!
Sent from my Nexus 6P
dgwood12 said:
That is quite a bit hotter than the OEM charger. Thanks for checking this!
Sent from my Nexus 6P
Click to expand...
Click to collapse
Indeed it's a significant difference in temperature. I didn't put it under cons since the temperature wasn't scathingly hot, but worth noting. However, I've decided that the Choetech will be my back up charger, and the Google brick will remain the one used more often.
And thank you for actually bringing this to my attention. Appreciate it
Sent from my Nexus 6P using Tapatalk
I also received this charger along with both types of cables.
They work great! No temp issues at all, and this charger doesn't slow my phone to a crawl while charging like the OEM one does.
Honestly this is a great deal and a much nicer price point then the stock charger, and I prefer using it. Nice to see that inexpensive doesn't always mean cheap.
The actual female Type C plug feels cheap. You can hear something flexing when inserting it. It works though, will be a spare travel charger.
I reached out to the rep about the heating issue. I was basically told it's nothing more than a defective unit, as I was told that there is built in overheat protection.
Will update OP again when new unit arrives, again with temperature readings.
Sent from my Nexus 6P using Tapatalk
Kinda worries me it lists Qualcomm QC 2.0 on the charger itself since we know the phones don't support it.
MoNsTeReNeRgY22 said:
Kinda worries me it lists Qualcomm QC 2.0 on the charger itself since we know the phones don't support it.
Click to expand...
Click to collapse
That's also been on the back of my mind. But my rational for still using it is that the phone is the one that requests a charge from the brick, instead of the brick sending whatever charge it wants. My background for how these chargers work is extremely rudimentary compared to what's floating around in the USB C thread, but I'd think any device that inappropriately received 9v (QC 2.0) would have fried by now.
Sent from my Nexus 6P using Tapatalk
I got this charger to test and it performs identically to the stock charger for me. I got it with some CHOETECH cables as well and the performance was on par with what I got from stock cable and charger. I got a 6 foot type c cable so I could get a little more reach and while I was successful on that front, the cable matters 6 foot cable in question did charge slower than shorter cables. This has been my experience with most 6 foot and longer cables, not just with type c but usb in general. I usually charge over night so it's not much of a hassle. On the days I may need a quicker top up however, I just use the CHOETECH charger and cable or stock charger and cable, whichever I'm closest to!
Choetech USB C review
Let me preface this review with the statement that the adapter and usb c cable were given to me for free for the purposes of the review. That being said, I’m not going to say this thing is great, if it isn’t and waste your money.
Now. On to the review
Choetech sent me a usb type c cable, and a fast charge adapter. The adapter model number is TC0001. I don’t recall the model number of the cable itself, and I left the packaging at home (I’m a truck driver). But it’s a standard 6 ft usb c to usb c cable. If you want to see a visual of it, you can watch the initial review video I did here
https://goo.gl/photos/PoHcFtpvmTKZbNsi7
The short version of this review is that it works exactly as advertised. I didn’t get a chance to try it with an auxiliary input cord, since I didn’t have a chance to hit a Walmart or best buy. But, I’ve tried both in every other combination.
Cord with stock charger, cord with choetech charger, choetech charger with stock cord. All of this was on a Nexus 5x (my only usb c device), and they all worked almost identically. The combo of the choetech cord and charger took about 15 minutes longer to charge from 4% than the stock setup from 4%. But, I was also driving, and listening to a podcast, whereas I was still and sleeping on the stock setup. So, I’m pretty sure in a apples to apples setup they would’ve been perfectly matched
Fit and finish
I am HARD on electronics. There’s no way around it. Between crap falling off my bunk, or table because I forget to secure it, or just the vibrations of the truck, or whatever. My stuff gets beat up. I can’t give you a longterm review on this thing. But, after 3 weeks of usage, every day, I’ll say that the charger looks exactly the same as when it came out of the box. The cable doesn’t show any frays or nicks or crimps, and the whole assembly still works just as well as before. I’ll say that the connection for the port seems to be a touch looser. But, that’s not to say it’s loose at all. More like the newness has worn off so that it’s not so tight. I still get that satisfying ‘click’, and I can still dangle my phone by the cord, if I really want to. No. I don’t recommend that test.
The phone itself is just fine, while charging. No overheating, no performance lag (outside of the normal stuff you get with the 5x… please google, fix it?). it shows the ‘charging rapidly’ message on the lockscreen, if you need that to get your warm and fuzzy, as well.
All in all, thus far, I’ve not used my stock charger in 2 weeks. And, if you gave me a blind test based solely on charging performance, I’m not sure I could tell you the difference.
A note of caution. I don’t have a usb c – usb a adapter, so I haven’t had a chance to use this thing in a data transfer or adb/fastboot command situation. Since you should always be using the stock cord for the latter, anyway, I’m not too worried about that. But I did want to let you know about the unknowns regarding transferring files.
My only concern (and this is why I wanted to test the insulation with an aux input cord) is the fact that you can feel the wires under the external sheathing. It’s not ridiculously obvious, and it doesn’t make me worry anything is going to get exposed just by rubbing the cord across a corner. But you can feel it, which means that people who charge and listen to music in their car might have issues. I simply don’t know.
That’s it. Hope this helps anyone looking.
Choetech
After doing a few weeks of testing with the latest Choetech Type-C to C *9.9ft(3M) cable and the Type-C 2.0 rapid travel charger, I think it's time I say a few words about them.
From my first impressions I was like wow this cable is super long. *Which could be a good or bad thing. I've been using stock cables for all my devices for a long time, and they have all been 3 to 4ft long. Which in today's world not long enough and not really logical if you need to have it behind a desk or while using it.
But anyways the cable is very nice and it actually snaps into my Nexus 6p. You can literally hang your *device from the cable without it falling to the ground. I tested the cable with CheckR app and it is approved and never had a issue charging my precious Nexus.
*Now for the charger not much I can say about it except that it just works. Charges my device from 5% to 100 in just over a hour. My Nexus says its charging rapidly on the lock screen. I have noticed sometimes when the charger is working really hard it makes a slight buzzing sound. But once the device gets to a certain percentage it stops. Now this isn't all the time just every so often. But it never effected charging. I highly recommend you all purchase these two products. You won't be dissatisfied.
Links:
CHOETECH Hi-speed USB-C to USB-C Cable 10ft(3m) for USB Type-C https://www.amazon.com/dp/B017W2RWAO/ref=cm_sw_r_other_awd_5qXNwb614QDTE
USB Type C Charger, CHOE 5V/3A 15W Rapid Wall Charger with the Latest Charging Tech *https://www.amazon.com/dp/B017I7EX46/ref=cm_sw_r_other_awd_CNXNwbRDTYX41
Sent from my Nexus 6P using Tapatalk
RANDYRKELLY said:
But anyways the cable is very nice and it actually snaps into my Nexus 6p. You can literally hang your *device from the cable without it falling to the ground. I tested the cable with CheckR app and it is approved and never had a issue charging my precious Nexus.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
How did you use CheckR with a USB C cable? Far as I know, CheckR is strictly to test if a USB A-C cable has the correct resistors in place.
Sent from my Nexus 6P using Tapatalk
rice923 said:
How did you use CheckR with a USB C cable? Far as I know, CheckR is strictly to test if a USB A-C cable has the correct resistors in place.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
By plugging it up to a USB type c PC port
Sent from my Nexus 6P using Tapatalk
RANDYRKELLY said:
By plugging it up to a USB type c PC port
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
When you open the CheckR app, there is an "i" symbol next to the donation symbols at the top. Clicking on that reveals a pop up that states the app is strictly for use with USB A-C cables. I'm aware you can still plug the cable into a USB C pc port, but my point is that it's a redundant test since the app isn't made for a USB C-C cable
Sent from my Nexus 6P using Tapatalk

This thing is killing USB cables, anyone else?

In the six months I've had this phone, I've gone through about 4 USB cables! The first couple lasted about 1-2 months but this last cable only lasted a few weeks! Something with this phone is just rendering them inoperable. Anyone else going through charging cables like crazy with this device?
Had mine for a little over a month and have not had any issues with cables. But I'm also extremely careful in how I handle things I own. Not saying you don't, but I feel as though I go the extra mile when it comes to care.
Are you possibly using the fast charging adapter that came with the phone and a cable that isn't capable of handling the 2.4 amps that go through it? I could see that killing a few USB cables.
We go through a lot of cables at our house with an S7, an S6, a tablet, and a Kobo. However, that's due to having a toddler and a pre-schooler that both like to chew on them. We've gone through almost 20 cables in the past 5 years.
Upstairs, though, we've been using the same cables for the S7 and S6 that we previously used with Note4 and a G2, so they're pushing a year or two in age.
What charger are you plugging them into?
Sent from my SM-G930W8 using Tapatalk
These are the two main types of cables I've tried so far, I don't see anywhere that they couldn't handle the 2.4 amps, but that doesn't mean they can't.
https://www.amazon.com/gp/product/B01FSUT9QW/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
https://www.amazon.com/dp/B013PVL3UG/ref=twister_B00DGRUY3M?_encoding=UTF8&psc=1
And I use them with the Samsung quick charge adapter. I need a cable with good length, so that's why I'm not using the one that came with the phone.
These ones specifically say they can cope with 2.4A
https://www.amazon.com/YUNSONG-Char...qid=1472234813&sr=1-2&keywords=2.4A+usb+cable
*Detection* said:
These ones specifically say they can cope with 2.4A
https://www.amazon.com/YUNSONG-Char...qid=1472234813&sr=1-2&keywords=2.4A+usb+cable
Click to expand...
Click to collapse
Thanks, I'll check these out when this 5 pack dies. Already lost one cable and have a feeling the second doesn't have much time left. So probably within a month or two at this rate!
ned4spd8874 said:
Thanks, I'll check these out when this 5 pack dies. Already lost one cable and have a feeling the second doesn't have much time left. So probably within a month or two at this rate!
Click to expand...
Click to collapse
Tbh I wouldn't have thought twice about it either, pretty obvious now thinking about it, but it wouldn't have crossed my mind that a normal USB cable couldn't handle the fast charge power draw
It happened to me too. Did you smell any burning?
Mozdef32 said:
It happened to me too. Did you smell any burning?
Click to expand...
Click to collapse
Nope, no burning or other smells.
Welp, I tried the fast charging specific cables and the first one just died on me. It lasted much longer than the other ones, but that's not saying much as it lasted about only 6 weeks.
These are the cables I am using now. Still have two of them left, will continue to use until I'm on the last one and then buy more I guess. WTF
https://www.amazon.com/gp/product/B01CSAOHAS/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

Categories

Resources