Hi there,
I'm trying to install one of the Dasaita PX5 headunits in my new QASHQAI and I've hit a snag. Two of the connectors on the wiring harness included with the unit are identical, but have very different wires coming out of them. I assume they are dependant in your cars factory setup, but since my unit didn't come with any sort of instructions I'm at a loss as to what they are.
My car has the small colour LCD from factory, with a factory rear camera (not the 360 camera) and front/rear parking sensors. Standard manual AC controls (not dual climate).
Any guidance would be appreciated!
I would assume that the "Low Plug" is for cars with low a equipment variant (as you can tell from the cables going into the connector already) and the other one is for cars with a more stuff.
So as of your cars description I would say go with the medium one and test it out.
Yep, I had a better look at the existing wiring loom today and the wires matched pretty well.
Decided to give it a try and it works brilliantly!
Factory rear camera and steering wheel controls all work, and I swear the audio quality using on board apps is better than the factory unit.
Hello, is it an android 8.0 unit ? If yes, does bluetooth works ?
This unit runs Android 6.0. There are 8.0 upgrade guides floating around but I honestly haven’t had the time or inclination to try it, the unit is working really well as is.
Bluetooth phone calls work great.
Bluetooth audio streaming works but I’ve used it maybe once briefly (I do all music and streaming directly on the headunit) so I cant really comment on how well audio works.
Ok thanks, I'm considering byuing a dasaita but I heard bluetooth doesn't work with android 8.0 units !
M4nu83 said:
Ok thanks, I'm considering byuing a dasaita but I heard bluetooth doesn't work with android 8.0 units !
Click to expand...
Click to collapse
Hi, I have Android 8 unit since 4 months and bluetooth works fine. I use bluetooth for phone calls, for audio I use Spotify from unit app.
mitchello said:
Yep, I had a better look at the existing wiring loom today and the wires matched pretty well.
Decided to give it a try and it works brilliantly!
Factory rear camera and steering wheel controls all work, and I swear the audio quality using on board apps is better than the factory unit.
Click to expand...
Click to collapse
hi mitchello,
I have the same car radio model, I have a question about the cable connection for the rear camera, I have a yellow cable from the power cable called cvbs, and two yellow cables on the camera aux cable, one says Aux Video In and the other Cam VIN, to which should I connect the Cvbs cable?
?
rafiuxdoo said:
hi mitchello,
I have the same car radio model, I have a question about the cable connection for the rear camera, I have a yellow cable from the power cable called cvbs, and two yellow cables on the camera aux cable, one says Aux Video In and the other Cam VIN, to which should I connect the Cvbs cable?
?
Click to expand...
Click to collapse
I have exatly the same problem, with my unit : 2 yellow cables but the factory reverse camera don't start !
krysthof972 said:
I have exatly the same problem, with my unit : 2 yellow cables but the factory reverse camera don't start !
Click to expand...
Click to collapse
Hello, What Is u Nissan vehicle model?
I have a Nissan Qashqai 2018, support Dasaita says the connect cam vin whit Cvbs. I have not done the test yet.
krysthof972 said:
I have exatly the same problem, with my unit : 2 yellow cables but the factory reverse camera don't start !
Click to expand...
Click to collapse
Have you connected the reverse trigger wire? I *think* its pink in color.. or blue. You'll probably have to splice it. This trigger is connected to your reverse gear, so that when you are in reverse, the screen will switch to camera.
rafiuxdoo said:
hi mitchello,
I have the same car radio model, I have a question about the cable connection for the rear camera, I have a yellow cable from the power cable called cvbs, and two yellow cables on the camera aux cable, one says Aux Video In and the other Cam VIN, to which should I connect the Cvbs cable?
?
Click to expand...
Click to collapse
Hey mate, I'd have to pull out my unit to check, but I'd expect you connect it to the CAM IN connector. The White/Red RCAs should be for the AUX input in the armrest, and the yellow RCA for the camera.
I assume you have a factory camera yes? With it all connected my factory camera automatically flicks on when in reverse (even if the unit is still booting).
rafiuxdoo said:
Hello, What Is u Nissan vehicle model?
I have a Nissan Qashqai 2018, support Dasaita says the connect cam vin whit Cvbs. I have not done the test yet.
Click to expand...
Click to collapse
thank you for the answer, CVBS don't work
it's 2015 Qashqai
I'm really drawn to this head unit for my 2017 Rogue SL AWD. My current non-Android Auto/Car play unit is basically just a bluetooth steamer. The built-in maps are so slow, outdated, cumbersome and without helpful traffic info that I simply use Google maps. This new unit looks sharp and allows full functionality without paying Nissan that crazy monthly fee.
I'm in 100% if I can more or less just do a swap out.
---------- Post added at 10:29 PM ---------- Previous post was at 10:23 PM ----------
Amazon has one listed with the PX6 CPU, so maybe slightly updated... "Dasaita 10.2" Android 9.0 Bluetooth Car Stereo Head Unit with 4G RAM / 64G ROM for Nissan X-Trail Qashqai Rogue 2014 2015 2016 2017 Car Radio Touch Screen GPS Navigation Support USB Bose AMP" at 499.
emtownsend said:
I'm really drawn to this head unit for my 2017 Rogue SL AWD. My current non-Android Auto/Car play unit is basically just a bluetooth steamer. The built-in maps are so slow, outdated, cumbersome and without helpful traffic info that I simply use Google maps. This new unit looks sharp and allows full functionality without paying Nissan that crazy monthly fee.
I'm in 100% if I can more or less just do a swap out.
---------- Post added at 10:29 PM ---------- Previous post was at 10:23 PM ----------
Amazon has one listed with the PX6 CPU, so maybe slightly updated... "Dasaita 10.2" Android 9.0 Bluetooth Car Stereo Head Unit with 4G RAM / 64G ROM for Nissan X-Trail Qashqai Rogue 2014 2015 2016 2017 Car Radio Touch Screen GPS Navigation Support USB Bose AMP" at 499.
Click to expand...
Click to collapse
Be prepared to be underwhelmed , over promised and under delivered.
marchnz said:
Be prepared to be underwhelmed , over promised and under delivered.
Click to expand...
Click to collapse
I bought mine from Ali Express ( Dasaita 10.2 - PX6 Android 9 ) and shipped to Australia in 5 days, I couldn't be more happier with the head unit.
All the Qashqai functions operate including the 360 all round camera, TPMS, Android auto and Carplay.
Hello All
I have dasaita px6 installed on my Qashqai as well
I want to know external MIC location best place as the built-in MIC was good initially then it became poor
Installed external MIC under the steering wheel but still voice is far
Hi all, i have Nissan Qashqai 2018 and i just few days ago i got my Dasaita PX5. Everything looks fine and work very well, but I am little bit concerned about noise which is coming out from device. Every time when I accelerate I am getting some kind of whistling noise coming out from device. Noise sometimes disappears but than come back again and started to be very noise. I tested and its coming from screen device, only disappears when I unplug the big black plug (which I think it is a main electrical socket or power supply because without that is not working). Do you guys have any similar issues before? Do you have any suggestions how to fix same one?
Second question is regarding to the SWC option. I connected everything how they did suggest but still is not working. I did choose proper settings on display and still nothing changed. I tried to contact support but until today no answer.
All help is more than welcome
sandpita said:
I bought mine from Ali Express ( Dasaita 10.2 - PX6 Android 9 ) and shipped to Australia in 5 days, I couldn't be more happier with the head unit.
All the Qashqai functions operate including the 360 all round camera, TPMS, Android auto and Carplay.
Click to expand...
Click to collapse
Do you have any pics you wouldn't mind sharing? Also, this is several months later, so... how do you still like it?
Thanks!
emtownsend said:
Do you have any pics you wouldn't mind sharing? Also, this is several months later, so... how do you still like it?
Thanks!
Click to expand...
Click to collapse
Had the HU for over a year now and it's faultless,everything just works i.e Factory Park Assist, 360 all round camera, GPS,DAB+.
Also I have the Carlinkit Carplay USB dongle which for me works every time with no issues where others have issues with inbuilt Carplay HU using ZLink.
Hi all,
I have a Seat Leon 5F with Seat Sound (so including a subwoofer). I've just installed a Witson PX5 W2-V5570 Android 8 unit. It's working fine, except for subwoofer (not working) and probably also center speaker.
On the original system, the signal for the subwoofer is coming from the quadlocker, but this doesnn't seem to be processed in the Android unit..
Anyone familiar with this? Know a solution?
Many thanks!
I'd say cut off the wire and solder it onto the extra cable used for subwoofers. But I'm not sure how the connections on this device are
TomTom1981 said:
Hi all,
I have a Seat Leon 5F with Seat Sound (so including a subwoofer). I've just installed a Witson PX5 W2-V5570 Android 8 unit. It's working fine, except for subwoofer (not working) and probably also center speaker.
On the original system, the signal for the subwoofer is coming from the quadlocker, but this doesnn't seem to be processed in the Android unit..
Anyone familiar with this? Know a solution?
Many thanks!
Click to expand...
Click to collapse
Hello.
Do you still have your head unit ?
Thanks
Yep, how so?
I intend to sell it though. It works, but i cannot get the sound to work properly. I have sound, but it appears it cannot drive all speakers from seat sound.
Does anyone have a better or updated app for the built in PX5 TPMS feature/software? I'm running a newly purchased 4/32gb octacore px5 (branded XTRONS 9" Octa-Core Android 8.0 Car Head Unit GPS Stereo DAB+ 4G for BMW E46 M3) with a 9in screen running Android 8.
I've just installed the internal replacement valve TPMS sensors on mine and the TPMS module itself. Having issues with reception (2 out of 4 sensors reading) and the box that's installed, but apparently it doesn't want to be near other electrics so I will move it up the dash towards the vents to fix that as I believe it's a radio reception issue.
The app seems to lack functionality though, I can't see how to pair a new sensor, say for example a spare wheel addition or replacing a wheel. The app also seems to forget it I swap the sensor positions (front and rear right sensors were put on the wrong rims by the tyre shop), I have swapped the front to the rear and after a fresh startup of the head unit after parking the car it's then forgotten that I swapped sensor positions.
Does anyone have a better version of the APK at all?
Is it a USB TPMS unit or does it connect directly to one of the connectors on the back of the radio?
If it is directly connected, try going into Factory Settings and change the TPMS type. Each type runs a different app and some are better than others.
If it is a USB unit, I have a few apks that came with my generic unit that might prove helpful.
OliFos said:
Does anyone have a better or updated app for the built in PX5 TPMS feature/software? I'm running a newly purchased 4/32gb octacore px5 (branded XTRONS 9" Octa-Core Android 8.0 Car Head Unit GPS Stereo DAB+ 4G for BMW E46 M3) with a 9in screen running Android 8.
I've just installed the internal replacement valve TPMS sensors on mine and the TPMS module itself. Having issues with reception (2 out of 4 sensors reading) and the box that's installed, but apparently it doesn't want to be near other electrics so I will move it up the dash towards the vents to fix that as I believe it's a radio reception issue.
The app seems to lack functionality though, I can't see how to pair a new sensor, say for example a spare wheel addition or replacing a wheel. The app also seems to forget it I swap the sensor positions (front and rear right sensors were put on the wrong rims by the tyre shop), I have swapped the front to the rear and after a fresh startup of the head unit after parking the car it's then forgotten that I swapped sensor positions.
Does anyone have a better version of the APK at all?
Click to expand...
Click to collapse
i have the same problem, can you fixed?
https://drive.google.com/file/d/1--pkK1nOxy864qN_tfvQ5xiCerFUkXkM/view?usp=sharing
https://drive.google.com/file/d/1--F5wr5zLuMSdpLg48tbHij5mifAK2iP/view?usp=sharing
Got the same issues with one of the sensors being a replacement and not detected by the box.
Has anyone figured out how reprogram it so it accepts the new sensor?
That learning feature when you press the button in the app doesn't seem to do anything - it just fails after some waiting.
The sensors have an unique id code written on them? Does the code need to be entered in some config file?
Hi yes it is a common problem for me but when the vehicle is moving the sensor reads fine
Hello to everybody. I have a problem with tpms... I need a apk file for install the app. because I don't have on my stereo and I don't know why. someone has a original file ?
Inviato dal mio SM-G950N utilizzando Tapatalk
millab said:
Is it a USB TPMS unit or does it connect directly to one of the connectors on the back of the radio?
If it is directly connected, try going into Factory Settings and change the TPMS type. Each type runs a different app and some are better than others.
If it is a USB unit, I have a few apks that came with my generic unit that might prove helpful.
Click to expand...
Click to collapse
If you have these APKs, can you please share? Thanks!
Hello I installed the newest sygav unit in my car which i think is the same as the dasaita unit and i just anted to know if anyone else had these issues and or might have solutions i'm currently on the android 10 firmware
-There is static coming out of what seems to be my right dash tweeter
-After an update i feel like my wireless carplay connection is a little slower than before and just overall just a little more laggy than previously (animations don't seem as smooth)
- my rear speakers simply just do not work anymore after installing the headunit which doesn't make sense to me because from what i know in my XLE RAV4 the audio is just one connector for all the speakers since i don't have the JBL upgrade with an AMP
Sell it and get a real carplay unit?
carplay unit?
Dude what is a better carplay unit then the sygav its the dasaita max10...
jinzyx3 said:
Dude what is a better carplay unit then the sygav its the dasaita max10...
Click to expand...
Click to collapse
The dasaita and sygav isn't a carplay unit, it's hacked Android running a Chinese knock off carplay emulator app 'zlink'. Search for that app to read about how buggy it is.
If you are looking for real, certified, carplay, an example is Sony XAV-AX1000.
I don't get why people buy these Android head units only to want to screen send from their mobile device, when the idea of having an Android head unit it to load apps onto it and use that as primary vehicle device.
Hello, I purchased an Xtrons PQS1139BL and it's been a toxic relationship. I love the features but its very buggy. Xtrons says there are no updates for this unit and I think they are tired of dealing with me.
This is my bug list.
Every electrical noise came out the speakers such as alternator whine, the idle are control valve on the engine, turning the headlighs on and off causes a pop. The solution so far has been Xtrons sent me a filter that removed 75% of the noise but my wife still could not stand riding in the car so I gutted the factory BMW DSP and added my own 4CH amp the is ran off of the RCA cables and that resolved 99% of the noise. But this unit only has front RCA out so now I lost fader control.
Unit lockups about 1 to 2 minutes after starting the car the UI will freeze and what is on the screen will stay but the steering wheel controls will still continue to beep when pressed eventually the screen will turn black and the steering wheel controls will stop beeping then sometimes the unit will reboot and come back and other times I need to restart the car at a red light or pull over and restart. My wife pointed out that it mostly happens after I reverse which lead me to this forum and as an experiment I cut the reverse input to the headunit and now the lockups after starting the car went from 50% to 5% but now I lost my backup camera. One thing to add is that once the unit is up and running it works fine so I don't think it's a heat issue.
Wireless carplay, the unit came with an app called multiplay and half of the time it would say "MFI chip not found". So Xtron's sent me USB adapter that uses an app called autokit and that works okay but my phone shows that it's charging but it's actually loosing a charge so I bought a USB Y adapter to add power from a cigarette lighter plug.
The versions that my unit shows is
Model PX6
Android 10
Build number rk3399-userdebug 10 qq2a.200305.004.a1 eng.hct2.20210630.152440 test-keys
Kernel version 4.19.111+
#131 Thurs Jun 24 2021
MCU version MTCH_GS_V3.78_3
May 31 2021
Is there any hope for this? Can i update it? Can I wipe and reload it? Can I pull logs off of this? I'm about over it.
This is the unit
10.25" Screen Android 11 6-Core 4+64GB Car Radio GPS For BMW E39 E38 740i 750i | eBay
Find many great new & used options and get the best deals for 10.25" Screen Android 11 6-Core 4+64GB Car Radio GPS For BMW E39 E38 740i 750i at the best online prices at eBay! Free shipping for many products!
www.ebay.com
This is the carplay adapter
Auto Car Navigation Car Auto Play Module IOS & Android Phone USB Dongle Adapter | eBay
Find many great new & used options and get the best deals for Auto Car Navigation Car Auto Play Module IOS & Android Phone USB Dongle Adapter at the best online prices at eBay! Free shipping for many products!
www.ebay.com
Thanks for reading this.
Jeremy
Hey did you found any solution for this problem?
p.a.i.n.k.i.l.l.e.r said:
Hey did you found any solution for this problem?
Click to expand...
Click to collapse
I resolved the noise issue with an aftermarket amp and the locking up i patched it with a switch in the glove box to reboot the headunit manually. That's the wifes job. This xtrons unit is complete junk.
Jeremy.flaugh said:
I resolved the noise issue with an aftermarket amp and the locking up i patched it with a switch in the glove box to reboot the headunit manually. That's the wifes job. This xtrons unit is complete junk.
Click to expand...
Click to collapse
Xtrons, complete junk. Yep - fake Chinese origin brands that sell from various factories at their best margins (buy cheap, sell expensive)
Jeremy.flaugh said:
I resolved the noise issue with an aftermarket amp and the locking up i patched it with a switch in the glove box to reboot the headunit manually. That's the wifes job. This xtrons unit is complete junk.
Click to expand...
Click to collapse
I have xtrons original software if you need let me know
p.a.i.n.k.i.l.l.e.r said:
I have xtrons original software if you need let me know
Click to expand...
Click to collapse
Yeah what do you have? Does it resolve the lockup issues?