Hello
on my Ericsin radio I was wrong in the factory setting after entering code 3368 wrong version of the build from the current version 1 to version 3 and after the restart of the device there is only a black screen and nothing can be done. nor Restore nor update anything .... does somehow reset the motherboard? or somehow get a picture to return the display and reset the factory settings back to Version 1
Thank you and apologize for your English
Maybe you can try to get into recovery. Long press power when booting (about. 20 to 30 sec) until the buttons flash.
Then release power and short press power again
Verstuurd vanaf mijn ZUK Z2121 met Tapatalk
This is not at all from the beginning of the display black nobody hint start nor the logo android nothing .... As if he was painting the image elsewhere and not on the display .... Not to know whether or not the offer
Related
Hi Guys
This morning my GT-N8000 wouldn't boot. It's stuck on the boot screen displaying "Samsung Galaxy Note 10.1".
I pressed the power button for a while making the device reboot and pressed power & vol-down to enter download mode. Download mode is working so I loaded Odin and the device was recognized so I flashed stock ROM with success. Flash went well and it reached 100% and no error messages from Odin and the Note 10.1 rebooted as expected. BUT... it's still stuck on boot screen.
Is it possible to make a hard reset somehow? Maybe while it's connected to the computer somehow?
I suppose I will have to send it in for repairs
Brgds...
Go first to recovery Mode (Power + Volume Up) and make a Factory Reset, After this CLEAR CACHE. Reboot and maybe thats it. If not, Flash now again with odin.
Your Data and Setting are all delete after this, but i dont know a other Way :-\
Gesendet von meinem GT-N8000 mit Tapatalk 4
buell47 said:
Go first to recovery Mode (Power + Volume Up) and make a Factory Reset, After this CLEAR CACHE. Reboot and maybe thats it. If not, Flash now again with odin.
Your Data and Setting are all delete after this, but i dont know a other Way :-\
Gesendet von meinem GT-N8000 mit Tapatalk 4
Click to expand...
Click to collapse
Power+Vol up will not bring up recovery mode on mine... are you sure it does on yours?
Okay.... Switch off the Note.
Hold down Power and Volume Up, if you see the Boot Logo, hold only the "volume up" down and release the power button until you see the Android symbol
Gesendet von meinem SM-N9005 mit Tapatalk
buell47 said:
Okay.... Switch off the Note.
Hold down Power and Volume Up, if you see the Boot Logo, hold only the "volume up" down and release the power button until you see the Android symbol
Gesendet von meinem SM-N9005 mit Tapatalk
Click to expand...
Click to collapse
I have the same problem, my GNote is stuck on the "Samsung Galaxy Note" screen.
I've tried to switch off the note, but the screen goes off for one second and it lights up again at the same screen.
If I plug the USB cable and try to switch it off, the note goes to the battery charging screen.
Odin seems to "connect" with the table.
I can enter the download mode and just that. I can't enter the recovery.
Attached pictures of qhat I get.
Any sugestions?
agelcer said:
I have the same problem, my GNote is stuck on the "Samsung Galaxy Note" screen.
I've tried to switch off the note, but the screen goes off for one second and it lights up again at the same screen.
If I plug the USB cable and try to switch it off, the note goes to the battery charging screen.
Odin seems to "connect" with the table.
I can enter the download mode and just that. I can't enter the recovery.
Attached pictures of qhat I get.
Any sugestions?
Click to expand...
Click to collapse
Did you try to flash stock firmware when in download mode and connected to odin?
Solved doing this: http://forum.xda-developers.com/showthread.php?t=2620782
??
What if you dont have a backup of your tablet?
Mattsok24 said:
What if you dont have a backup of your tablet?
Click to expand...
Click to collapse
Then i guess the only way would be to flash a stock firmware using odin, eg the one it came with from the factory.
You should be able to download a stock firmware from SamFirmware, after you have created a free account....
umm...
TriMoon said:
Then i guess the only way would be to flash a stock firmware using odin, eg the one it came with from the factory.
You should be able to download a stock firmware from SamFirmware, after you have created a free account....
Click to expand...
Click to collapse
if you look at my thread http://forum.xda-developers.com/showthread.php?t=2619555
it shows you that i have already tried this method your telling me about and all it says is "Fail" :/
Any other suggestions?
didn't solve mine... ... ...
Agelcer:
I did as you said, but unfortunately, for me Odin always gave me the Failed Message.
I used the firmware file from the link and the Odin 3.07 from the other link as well.
Did anyone get the same result?
And did anyone find a solution for this problem after failing with this method?
Thanks
Usual reasons for fail .
Wrong Firmware / Wrong Model .
Bad firmware download .
I went to a service with my N8000. They put another EMMC and tried something with JTAG (they didn't say the exact details), still doesn't work. What other things can I do, apart from changing the whole board - the most expensive solution (is there a little component that could be damaged and it gets stuck at boot logo)?
HEllo,
Yestarday i puted on my TF300T cynagogen rom. To did it before i unlock the bootloader and put a recovery in fastboot mode (all seems succed because i well the devise is unlocked at startup) BUT i do a wipe cashe, and reboot my TF300T too earlier i guess... now my TF300T cannot reboot and it stucks to the screen logo with msg at top right (devise is unlocked)...
I'm very sad.. and try to correct this issue :
- i cannot use adb and fastboot (devise no recognize because F300T did not start and stuck at logo screen)
- i install android drivers
- i can use APX mode
In APX mode i try to ip contains in this zip file download from asus : TF300T-WW_epad-10_6_1_27_5-UpdateLauncher.zip (put in SDcard)
but i have no update message so i search another solution...
I see that there is a tools "NVFlash" but i m not really technicall and i don't really understand ... because in this step :
https://www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean/
it write to begin "connect in fastbooot mode", ... me ? i cannot connect to fastbootmode, juste APX...
So if somebody can help me to unlock my tablette and resused it ...
Thanks a lot...
Rgds
To use nvflash you need a set of files that are special for your device. If you have not created them before, nvflash won't help you now.
However there are a lot of things people tried successfully to get into fastboot mode. Search a little in the forums. Some quick examples: hold power and vol-down for more than 10 secs, use the reset hole and vol-down, power off and attach the charger holding vol-down, etc.
Sent from my TF300T using Tapatalk
Honestly i sought during 4 hours yesterday if i posted a message it because im desesparate. I already try all solutions that you are talking about except the reset hole... I will try it tonight
Thanks
Hi again,
nothing works, i test reset button et vol down but i still have logo Asus, inspiring innovation, persistent perfection"
and message the device is unlocked.
And when i connect no fastboot devices detected i g
have
" waiting for devise "
I guess it's deads for me tablet is KO there is no more bootloader (when tablet was KO yesterday it's after the "wipe data" at bootloader... so i guess i can
put my tablet in the recycler bin.
Thanks.
the issue :
The big problem: Ultimately... when I rebooted the tablet, I just see the initial "ASUS" screen with "The Device is UnLocked." in the top-left corner. When I hold the power button to turn it off... it powers back on within a few seconds, and stays at the "ASUS" screen again. It will not stay off... and will not show anything but the "ASUS" splash screen. (With one exception, described later - "the only ray of hope...") If I hold the volume up or down buttons when powering on the device, absolutely nothing different happens. (since it doesn't STAY off... I've tried all kinds of different combinations of pushing/holding the appropriate buttons for when the tablet comes back on) IMPORTANT: I never see the "three icons" as expected when holding the volume button(s). No RCK, USB, etc... when the unit turns back on, it goes to the ASUS screen, and stays there until the battery dies. As a result... I can't get into recovery, fastboot, whatever in the traditional way. I have Just APX.
Pressing the reset button alone, or reset + volume down has the effect of temporarily turning off the unit and then on again, the same as holding the power button to turn it off and letting it turn itself back on again.
Which version of CWM did you use?
First, recovery-clockwork-5.5.0.4-tf300t.img from koush's ClockworkMod Recovery: (WARNING: this does not work with the newer Jelly Bean versions. Flashing this will brick your tablet!) download
ANd after i said **** i have JB 4.2.1 ... but at this time tablet works
after i download this :
http://forum.xda-developers.com/attachment.php?attachmentid=1077648&d=1337726179
Tablet always works.. then in recovery i have three icon RCK , ANDROID and WIPE and i did a mistake and click on WIPE and after it was ... the blackout for my tablette
I know that i did a mistake ... a mistake which cost me 326 e
So as there is no solution on, could you confirm me if I buy a motherbroard for my TF300T it will be ok ? Or i need to change something else ? Thanks
reikanou said:
So as there is no solution on, could you confirm me if I buy a motherbroard for my TF300T it will be ok ? Or i need to change something else ? Thanks
Click to expand...
Click to collapse
A working motherboard (new or used) will certainly solve your problem. Just be careful in replacing it. If you need more info on this, holler.
Hum ok thans i will do that but i told me mother cost .. 80 € ... 130 €.. and a new : 160 €.. and there is a possibility that it didn't work..
Can i put a motherbroad 32 Go on my tablette 16 Go ?
there is somme tablette 8" as nexus galaxy tab 3 .. between 150 e and 200 e ...
So now it's a reflexion about athat
Best Rgs,
reikanou said:
Hum ok thans i will do that but i told me mother cost .. 80 € ... 130 €.. and a new : 160 €.. and there is a possibility that it didn't work..
Can i put a motherbroad 32 Go on my tablette 16 Go ?
there is somme tablette 8" as nexus galaxy tab 3 .. between 150 e and 200 e ...
So now it's a reflexion about athat
Best Rgs,
Click to expand...
Click to collapse
It all boils down to personal preferences. You can always install a 32GB motherboard on a 16GB tab, The only difference in hardware is the internal storage capacity. I'd say if you can find a used working motherboard for a reasonable price, go for it. I've tried the galaxy tab 3, which I don't think has the same computing capability as the TF300, and a smaller screen, but it's newer.
I buy the motherbroad 60€. I will keep inform about replace of it
Thanks a lot
reikanou said:
I buy the motherbroad 60€. I will keep inform about replace of it
Thanks a lot
Click to expand...
Click to collapse
A friendly reminder: Don't go it alone if you're unsure. THIS thread should provide you with all the essential information about how to replace it. If it's too long, remember to first, right after you take the back cover off, turn off the service switch (the attached thumb shows its location at the top), and be careful with the power button ribbon at the right top corner when you look at the tab from the back.
When i will receipt motherbroad i will follow this guide :
http://forum.xda-developers.com/showthread.php?t=2368372
When i rremount the motherboard, soulhd i put some glue on CPU to fix the orange object ?
Thanks a lot for your answer.
Hello!
I have a rooted XT1032 and as the 5.0 update is around the corner i thought i'd start from scratch so everything would be as smooth as possible. I backed up all my files and I commenced with the factory reset. The problem is that after turning off, my phone wants to enter CWM, but is not able and keeps on trying(i think this is due to the fact that the factory reset deleted some CWM files). I only see Andro for about half a second every 5-6 seconds.
Do you have any idea what i could do?
I tried pressing the power button and power+volume down, but nothing seems to work..
So i was playing with and i pressed the power button for 20 seconds and it came back to it's initial state. CLOSED
Shinr3x said:
Hello!
I have a rooted XT1032 and as the 5.0 update is around the corner i thought i'd start from scratch so everything would be as smooth as possible. I backed up all my files and I commenced with the factory reset. The problem is that after turning off, my phone wants to enter CWM, but is not able and keeps on trying(i think this is due to the fact that the factory reset deleted some CWM files). I only see Andro for about half a second every 5-6 seconds.
Do you have any idea what i could do?
I tried pressing the power button and power+volume down, but nothing seems to work..
So i was playing with and i pressed the power button for 20 seconds and it came back to it's initial state. CLOSED
Click to expand...
Click to collapse
Factory reset is broken when rooted...simply flash your stock image
Cheers
Hi guys,
I just bought S6 and here are problems that I encountered:
Phone is unbranded, sim-locked, I performed factory reset too (soft).
1. Firmware installed is 5.0.2 and I wanted to update to 5.1.1 but there is no option in About Device -> Software update. This button is simply missing ! First time I see something like this
2. I did soft factory reset again, still missing.
3. I wanted to do hard reset but after holding up volume up+home+power and selecting factory reset option I get "No command" message and phone reboots to normal operation.
4. Smart Switch nor Kies sees my phone. Phone is detected by windows and I can access the storage. (I tried with all of the USB modes)
Has anyone encountered things like that ?
Lukasz
Sounds like a clone
dogan2010 said:
Sounds like a clone
Click to expand...
Click to collapse
Can I check it ? I can connect to galaxy apps though...
Hmmm download antutu ...do a test .post screenshot and we know if its a clone or not
Simple to find the clone or original. . Are you able go to download mode by after power off vol down + home + power key
Sent from my SM-N920C using Tapatalk
sendhiloo7 said:
Simple to find the clone or original. . Are you able go to download mode by after power off vol down + home + power key
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Ive seen clones who enter in download mode that way... the most acurate way is antutu or any benchmark
Take time Phone INFO because you see more.
In a fake as well as other hardware is installed.
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Miticohtc said:
Hi guy
Hi I have replaced display on Zenfone 2 ZE500CL. But when I turn on the device, says me "update firmware touchscreen". It remains at 0% and then says "press and hold power button until the screen has black for a moment for to start a new touchscreen firmware update."If i hold power button it power off and i can only turn on again, but it says the same thing. I have already do hard reset and O.S, but nothing. Anyone can help me?
Thanks :crying::crying::crying:
Click to expand...
Click to collapse
Anyone can help me?
Guys guys Science may have found a solution right now ... will luckily I do not know, however, acts, then taken by anxiety, I did a downgrade of the OS taking it to the first version available from asus website:
https://www.asus.com/it/Phone/ZenFon...Desk_Download/ and download the oldest! that is, the first at the bottom, downloaded the zip file, and insert it in SD, reboot the phone in boot pressed power button and volume +, with selected RECOVERYMOD down key and select it with the power button, go into recovery and select update from SD car, flashed the firmware previously downloaded and placed in SD at the end you do the second wipe data factory and wipe cache, and reboot, there will dawn upgrade the touch, but the startup screen with the set of languages, now do not do anything and restart again, now it appears the annoying firmware upgrade again always with 0% but the screen "press and hold the power button ... etc .." do it and you will see that it will restart the cell, proceed quietly with the set of the options and creating acount, now every time you turn it on or ravviate, will win for a second the annoying pop-ups but the cell will reboot again and will turn on normally, it is not the best solutions but at least you can use your device, I hope I was helpful and let me know
PS SORRY FOR MY BAD ENGLISH
FIX FILE
HI guy this is a solution, download it,insert in SD card,and flash via recovery
https://www.dropbox.com/s/yyfuxude558rbpj/UL-ASUS_Z00D-WW-12.16.4.3-user.zip?dl=0