Database Info

[Q] HTC HD2 won`t go in to bootloader mode

Dear all,
I have two big problems!
1st on is that my phone HD2 won`t start. It just freeze on the white screen with HTC logo and ROM numbers.
2nd is that when I tried to put it in bootloader mode it won`t go. I tried to press down volume key and power key but it happen`s teh same like in the 1st paragraf.
Can you maybe help me???
Thanks in advance.

take the battery out and do a hard reset. Hold volume up and down at the same time and press power button.

I also tried to do that and nothing happens! It just show`s white screen with htc logo.

My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile

rsimiao said:
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
Click to expand...
Click to collapse
Rsimiao, any luck getting your phone into bootloader mode? I have the same problem.

Have same problem
my hd2 won t go in bootlaoder mode, impossible to see spl and wont be flash by hspl 3
impossible to hard reset it
its saying that sd card fail to copy something
is there a solution ??

no usb loading in bootlaoder
Hi I have problem with loading usb in bootlaoder mode.....
When I turn on the phone everything is ok working fine
I'm trying to put a new Rom but I cant because can not find usb
can anyone help me please.....

Dont go to Bootloader (Tricolor Menu)
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike

Take bettery out, then try again
it will work

i tried EVERYTHING! but it dont help
and battery too!

Having the same problem I have SPL-3.03 HSPL & trying to downgrade to SPL 1.66 but won't go into Bootloader. I've tried an 8gb, 4gb & now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen. Pressing reset button & holding end call & Vol down button.
This is the right file to rename from HTC?
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship

Make sure you are not using the USB cable while trying to enter bootloder. I had the same problem, but once unplugged the cable all was fine.

I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!

HTC HD2 won`t go in to bootloader mode
Junks666 said:
... now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen.
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Click to expand...
Click to collapse
Hi Junks,
The THREE COLOUR SCREEN is BOATLOADER this is FIRST BOOT LOADER or (I Think) the name is H-BOOT. You have to correct ROM for HTC HD2, but CMIIW the rom is for HTC HD2 T8585 (WWE) with 516 Internal Memory. Is your HD2 this Model or another Model famous with name TMOUS (T-Mobile Edition) with 1024 Internal Memory. I believed if you still have tricolor screen easier to "wake up" your phone.

Im haveing the same problems please someone help... a Demonoid invite code is all I have to offer here

DJ Legless said:
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
Click to expand...
Click to collapse
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up

x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!

kris29440 said:
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
Click to expand...
Click to collapse
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"

x1123 said:
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
Click to expand...
Click to collapse
I usely use SD Builds, but I installed DFT_LEO_MAGLDR113_DAF,HSPL4,MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M,NexusHD2-Gingerbread_V2.7_NAND__Android-2.3.4__update and wifi-calling-htcleo-gb-20110518 ( Yes I just copy and paste the file names lol) My phone was working fine (Not sure about the bootloader/Tri-color screen) untill a few days ago my android build boots in safe mode I did find a remedy for that and thats by pressing and holding the Call (green), Home and Windows keys down while the android boots, but I have to do that all the time now. What I am trying to do is restore it back to fatory settings. Oh yeah BTW the AMAGLDR bootloader dose boot and also CWM Recovery but while In the aMAGLDR I have to hold the back key to press vol. up and down other wise it will keep moveing back to the top of the list (Its been like that sence I installed MAGLDR) but I do not have any problems with the vol up and down key in any other programs. I am also able to use USB Flasher and any other mode besides Windows Mobile Device Center (Windows 7). I also tried gettng into Sync by installing Windows phone 7 (witch installed fine with USB flash (Useing MAGLDR) but not luck with syncing back to WM6.

x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
Hi. I've tried that combination of keys & I just get the O2 Welcome screen. The only key combination that works is when I power up with the Vol Down key held. I then get the tri-colour screen.
Don't know if this helps but.....
When I get the tri-colour screen, I have the following text:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40

[Q] Bricked Transformer

I had a working Transformer until earlier today when the OTA update came along. Having accepted installation, my device now gets to the Eee Pad / ASUS logo and hangs there (waited for about 45 minutes after the update). Trying to reboot into recovery gives:
Android WW_epad-user bootloader < e> released by "WW_epad-8.2.3.6-20110414".
Checking for android ota recovery
Booting recovery kernel image
It does not give me the Up to recovery, Down to wipe option.
Any thoughts on how I might recover the device?
Many thanks in advance for your help.

Ohh **** that dont sound good
Sorry i cant help with any advice on fixing it, apart from trying a factory reset ?
Did you apply the update with under 50% of the battery available ?

No, full. And connected to the mains.
I cant get any option to do a full wipe, it never asks me.

morak said:
No, full. And connected to the mains.
I cant get any option to do a full wipe, it never asks me.
Click to expand...
Click to collapse
There are some things you can try in this thread - http://forum.xda-developers.com/showthread.php?t=1032374
Here a few key combinations for anyone interested:
VOL_DOWN + POWER (continue holding VOL_DOWN when it starts booting until you get a prompt) = Bootloader which offers two prompted options: (1) Recovery if you press VOL_UP within 5 seconds or (2) Data wipe if you press VOL_UP later. None of these seem to offer any USB devices like fastboot etc.
VOL_UP + POWER or VOL_DOWN + VOL_UP + PLUG IN USB = NVFlash mode. It clearly is the NVFlash APX device that we see appearing, but it barfs as soon as we run any sort of nvflash on it (Many Windows and Linux versions have been tried). Please note that in this mode the screen stays completely blank and the only way to get out of it is the following option:
Hold POWER for ~10s = Forced power off. This always helps if you are stuck in some weird mode and nothing on the screen
Dont know if any of these key presses will work on yours, worth a try to get it to recover ?

Yeah I had seen that thread. Unfortunately no joy from either option. I dont get the prompt when I do VOL DOWN+POWER, just seems to go straight into recovery. And as the post says, NVflash doesn't help at the moment.
Can't even seem to get the ADB USB devices to show up, I can only get the APX device which seems to be fairly useless ATM. Looks like I may have to RMA the thing.

What is that small hole next to HDMI port? Did you try that, it may just be button (use paper pin) to reset it to factory default?

Or maybe microphone ? lol i personnaly don't think those tablets would actually have a reset button, would check the manual first before sticking a paper pin into every holes...

My Transformer just came in, I accepted the OTA update and while installing it saw this thread and had a dreadful feeling. Thankfully, it rebooted fine and is working... sounds like something's wrong with yours unfortunately OP .

If you haven't tried the 10 second power button method as mentioned in an earlier post it's definitely worth a try.

stuntdouble:
I thought the 10 sec power button thing just turned the device off. Is there something else I can do that I am missing?

I think it clears cache and/or ram too. I'm not saying it will definitely fix your problem, it may not, but if it was me I'd try everything. It won't damage anything so don't worry.

Have you tried getting into the Clockwork mod recovery? You need to place it on an external microsd and when you do the holding down when switching on thing, it goes into the recovery on the card instead of the stock one. It might allow you to flash a rom to get it running again.
You can find the Clockwork recovery with instructions here
http://android.modaco.com/content/a...od-recovery-for-the-asus-eee-pad-transformer/

Good idea, unfortunately it didnt work. It doesnt appear to be allowing me to get to the point where it will read EP101_SDUPDATE.zip from the SD.

You sure filename is EP101? Shouldnt it be TF?

All the instructions call for EP101, but I tried TF too just in case!

dotpro said:
What is that small hole next to HDMI port? Did you try that, it may just be button (use paper pin) to reset it to factory default?
Click to expand...
Click to collapse
It's a microphone. If you go poking a paperclip in there, good luck claiming under warranty.

Same thing just happened to me... reboot for update, stuck at boot screen.
Not sure if we can find a EP101_SDUPDATE.zip for higher than 20110414 if that'd be a fix or what... or even a PC restore process.

hecatomb said:
Same thing just happened to me... reboot for update, stuck at boot screen.
Not sure if we can find a EP101_SDUPDATE.zip for higher than 20110414 if that'd be a fix or what... or even a PC restore process.
Click to expand...
Click to collapse
sonofab*tch same here. You would think they would warn people that this could happen. This is ridiculous. Their worthless phone tech kept traying to get me to hold f9. I wanted to reach through the phone and punch him.

So you are getting bricked units with stock? No modications or rooted devices?

stuntdouble said:
So you are getting bricked units with stock? No modications or rooted devices?
Click to expand...
Click to collapse
Root doesnt work on the US devices, also, OP hadnt rooted.

[Q][UNBRICK] Is my TF700 a brick OR asleep in APX MODE?

Hello everyone,
This is my first post here so forgive my errors (if any):
I have tried a few things on my TF700:
1. I have installed the rooting tool from asus website and after activating it,
The first boot scrren said (on top left corner) "the device is unlocked"
When running the app again it would give an error.
2. I tried soft reset - nothing there.
3. I went for hard reset - I accidently went for the left most icon....
After a little investigation on a few pages here I think it is in APX mode..???
It turns on but stays in the first screen with the white ASUS logo on screen & thats it...
Any ideas anyone???
How do I save my precious TF700??
I tried connecting to it through USB installing (Linux):
cat > /etc/udev/rules.d/60-nvflash.rules <<END
# nvflash support for Nvidia Tegra systems attached to USB
SUBSYSTEM=="usb", ATTR{idVendor}=="0955", ATTR{idProduct}=="7820", MODE="0660", GROUP="plugdev"
END
Click to expand...
Click to collapse
With no luck...
What can I do???
Thanx...

jadeye said:
Hello everyone,
This is my first post here so forgive my errors (if any):
I have tried a few things on my TF700:
1. I have installed the rooting tool from asus website and after activating it,
The first boot scrren said (on top left corner) "the device is unlocked"
When running the app again it would give an error.
2. I tried soft reset - nothing there.
3. I went for hard reset - I accidently went for the left most icon....
After a little investigation on a few pages here I think it is in APX mode..???
It turns on but stays in the first screen with the white ASUS logo on screen & thats it...
Any ideas anyone???
How do I save my precious TF700??
I tried connecting to it through USB installing (Linux):
With no luck...
What can I do???
Thanx...
Click to expand...
Click to collapse
If you use the Asus unlock tool, you should not brick your device. It looks like that you wipe your system some how. I am guessing here... Can you do some test for me? If you on the Asus screen, just press the power button for about 10 seconds until it shuts down and then keep holding the power button with the volume down at the same time until you are going back to the three icons, thanks. I just want to see if you can get back to your recovery...

LetMeKnow said:
If you use the Asus unlock tool, you should not brick your device. It looks like that you wipe your system some how. I am guessing here... Can you do some test for me? If you on the Asus screen, just press the power button for about 10 seconds until it shuts down and then keep holding the power button with the volume down at the same time until you are going back to the three icons, thanks. I just want to see if you can get back to your recovery...
Click to expand...
Click to collapse
Than you for you reply...
I already tried that...it just loops the same shut down to ASUS LOGO screen with no response to the volume down button.
I also let it run out of power so to try & get it out of this loop which resembles an APX loop but in vain...it just keeps on powering up to the same state...
Will give it another go....
There isn't even a pause where I can slip the volume down button in, that is why I let it run out of power to slip the volume down button in...& that is what I am going to do now...let it charge for a short while and power it up with the volume down button (which did not work for several tries...)

jadeye said:
Than you for you reply...
I already tried that...it just loops the same shut down to ASUS LOGO screen with no response to the volume down button.
I also let it run out of power so to try & get it out of this loop which resembles an APX loop but in vain...it just keeps on powering up to the same state...
Will give it another go....
There isn't even a pause where I can slip the volume down button in, that is why I let it run out of power to slip the volume down button in...& that is what I am going to do now...let it charge for a short while and power it up with the volume down button (which did not work for several tries...)
Click to expand...
Click to collapse
Just powered it up with volume down & same screen...
What can I do?

jadeye said:
Just powered it up with volume down & same screen...
What can I do?
Click to expand...
Click to collapse
I believed that I can not help you any further with this issue because my knowledge is limited in this situation. I hope that somebody else can give you a good advice.. Good luck..

Hold down volume down and keep held down whilst holding the power button down for at least 10 secs. What happens?

sbdags said:
Hold down volume down and keep held down whilst holding the power button down for at least 10 secs. What happens?
Click to expand...
Click to collapse
I have do this several times (but will try again) and it just powers back up to the same screen...
Did anyone refer you my suggestion of it being in APX mode??
What happens if I put a micro SD Card in the slot??
What is that left most logo on the hard reset screen?
What is that right most logo on the hard reset screen?
I know the center is the android...
HELP!!!
Where are all the experts here??
If an SD Card does function, what do I need to have on it in order to restore the state of my ASUS to functional?
Thanx to all those who are giving my POST some thought...

jadeye said:
I have do this several times (but will try again) and it just powers back up to the same screen...
Did anyone refer you my suggestion of it being in APX mode??
What happens if I put a micro SD Card in the slot??
What is that left most logo on the hard reset screen?
What is that right most logo on the hard reset screen?
I know the center is the android...
HELP!!!
Where are all the experts here??
If an SD Card does function, what do I need to have on it in order to restore the state of my ASUS to functional?
Thanx to all those who are giving my POST some thought...
Click to expand...
Click to collapse
The device will enter in APX mode only with the Volume UP + Power buttons combo and to get out of that mode you need to hold the Power button for at least 10 seconds.
If you can't get to the bootloader menu (the one with the 3 icons) anymore you are out of luck and only Asus can repair your device. APX it's useful only if you have the NvFlash backup.
Inserting a microSD with an original Asus firmware is also useless if you can't access the bootloader menu because you can't boot in recovery mode.

jadeye said:
I have do this several times (but will try again) and it just powers back up to the same screen...
Did anyone refer you my suggestion of it being in APX mode??
What happens if I put a micro SD Card in the slot??
What is that left most logo on the hard reset screen?
What is that right most logo on the hard reset screen?
I know the center is the android...
HELP!!!
Where are all the experts here??
If an SD Card does function, what do I need to have on it in order to restore the state of my ASUS to functional?
Thanx to all those who are giving my POST some thought...
Click to expand...
Click to collapse
Make sure you do EXACTLY what sdbags said - he IS the expert.
With the tablet powered OFF, press and hold BOTH the power button and volume down button together, for at least 10 seconds. It should bring you back to the screen with the 3 icons. RCK, android robot icon, wipe. RCK gets you to recovery mode where you can use TWRP for recovery/flash installs, etc. Middle android is the cold boot option which sometimes fixes problems like you're having. Don't do wipe unless someone like sdbags explicitly tells you.
Hope you can fix this.

jt1998 said:
Make sure you do EXACTLY what sdbags said - he IS the expert.
With the tablet powered OFF, press and hold BOTH the power button and volume down button together, for at least 10 seconds. It should bring you back to the screen with the 3 icons. RCK, android robot icon, wipe. RCK gets you to recovery mode where you can use TWRP for recovery/flash installs, etc. Middle android is the cold boot option which sometimes fixes problems like you're having. Don't do wipe unless someone like sdbags explicitly tells you.
Hope you can fix this.
Click to expand...
Click to collapse
Well guys...thank you all for your help & time...
I tried everything anyone here suggested but unfortunately ended up with the same result: ASUS white logo screen.
The tablet is still under the first year time period...any suggestions as for how to get it fixed (RMA) without paying tones of money?
What should I say happened???
Guess RCK does not work on my device...(?)
Thank you all...

Did you try the middle android icon to see if that helped? You switch to the middle one by pressing volume down, then select it by pressing volume up.

The device also have a reset button (a tiny hole near the micro hdmi port),use a paperclip to press it and hope for the best.
As for the RMA ,Asus could charge you for repairing because you unlocked the bootloader but some users here on XDA also reported that Asus repaired their device for free even if the bootloader was unlocked.

Pretoriano80 said:
The device also have a reset button (a tiny hole near the micro hdmi port),use a paperclip to press it and hope for the best.
As for the RMA ,Asus could charge you for repairing because you unlocked the bootloader but some users here on XDA also reported that Asus repaired their device for free even if the bootloader was unlocked.
Click to expand...
Click to collapse
Sorry guys...NOTHING WORKS!!! :crying:
:angel: Thank you all for your time & assistance...

jadeye said:
Sorry guys...NOTHING WORKS!!! :crying:
:angel: Thank you all for your time & assistance...
Click to expand...
Click to collapse
im having same issue. and for me its worse because my volume rocker is broken

crappy devices by asus - NO SUPPoRT!!!
qman66 said:
im having same issue. and for me its worse because my volume rocker is broken
Click to expand...
Click to collapse
Sorry to hear...I could never get it fixed and asus support does NOT EXIST!!!
I am never buying such crappy devices by asus ever again!!!
I did write the like 5 times, they do have service labs here but these service labs know much less then xda-devs...:laugh:

Pretoriano80 said:
The device will enter in APX mode only with the Volume UP + Power buttons combo and to get out of that mode you need to hold the Power button for at least 10 seconds.
If you can't get to the bootloader menu (the one with the 3 icons) anymore you are out of luck and only Asus can repair your device. APX it's useful only if you have the NvFlash backup.
Inserting a microSD with an original Asus firmware is also useless if you can't access the bootloader menu because you can't boot in recovery mode.
Click to expand...
Click to collapse
I have only APX mode available and I have the NvFlash backup.. Is there any way to bring him to life? I can't enter bootloader menu or recovery.

Prizrak_M said:
I have only APX mode available and I have the NvFlash backup.. Is there any way to bring him to life? I can't enter bootloader menu or recovery.
Click to expand...
Click to collapse
You can try this treat, xda-developers Asus Transformer TF700 Transformer TF700 Q&A, Help & Troubleshooting i screwed up by Motawa88
https://forum.xda-developers.com/showthread.php?t=2742274
Best regards
Scenic-3

Scenic-3 said:
You can try this treat, xda-developers Asus Transformer TF700 Transformer TF700 Q&A, Help & Troubleshooting i screwed up by Motawa88
https://forum.xda-developers.com/showthread.php?t=2742274
Best regards
Scenic-3
Click to expand...
Click to collapse
I'm a little confused, but if I can't get access to fastboot, is it all?

Bricked Asus ME301T

Messed up big time and have surely bricked my device (permanently). Was trying to install Omni ROM on it. (Had it rooted, unlocked it, couldn't enter recovery then, kept getting error. tried to flash TWRP recovery 2.6.3.0 using terminal on tab, reset the tab, and we get where i am now)
Now all i get when i switch on my tab is an ASUS start screen with "The device is unlocked" message on the top left, and it just stays there. Same thing happens when start it with hold power button and volume down key or reset and volume down key. But when i press reset and volume UP key, the pc recognizes the tab, and i can install the driver either as:
1. ADB interface
2. Bootloader interface
3. Composte ADB interface
and the device comes up as an APX.
Tried to follow Buster99's method (of unbricking for TF300T) after the device drivers are installed, but all i get is <waiting for device>
Any hope of recovering it or am i really fckd.

true_lies said:
Messed up big time and have surely bricked my device (permanently). Was trying to install Omni ROM on it. (Had it rooted, unlocked it, couldn't enter recovery then, kept getting error. tried to flash TWRP recovery 2.6.3.0 using terminal on tab, reset the tab, and we get where i am now)
Now all i get when i switch on my tab is an ASUS start screen with "The device is unlocked" message on the top left, and it just stays there. Same thing happens when start it with hold power button and volume down key or reset and volume down key. But when i press reset and volume UP key, the pc recognizes the tab, and i can install the driver either as:
1. ADB interface
2. Bootloader interface
3. Composte ADB interface
and the device comes up as an APX.
Tried to follow Buster99's method (of unbricking for TF300T) after the device drivers are installed, but all i get is <waiting for device>
Any hope of recovering it or am i really fckd.
Click to expand...
Click to collapse
Shoot me an email here [email protected]
Lets see if we can get you fixed up....
Thx Josh

lj50036 said:
Shoot me an email here [email protected]
Lets see if we can get you fixed up....
Thx Josh
Click to expand...
Click to collapse
My ME310T is bricked as well and I am not sure of what to do since using the pin hole to reset does not work.
It kept booting to the ASUS logo and I downloaded software from the ASUS site and put on my SD card and tried to load the new firmware/software. Now I only get a green android on his back with a red brick.
Please help, thanks

My ME310T
Bricked mine last night My ME310T, accidentally did the wipe from the Bootscreen with the RCK ,, now i tried everything i could find , ADB, Nvflash, power+ Vol - ( no go) reset + vol- nogo, only can get it to Vol+ and APX. All i get is the Boot unlocked in upper left , and Asus Innovation.. or blank screen with APX .. Any help would be great ,,,

thsire said:
Bricked mine last night My ME310T, accidentally did the wipe from the Bootscreen with the RCK ,, now i tried everything i could find , ADB, Nvflash, power+ Vol - ( no go) reset + vol- nogo, only can get it to Vol+ and APX. All i get is the Boot unlocked in upper left , and Asus Innovation.. or blank screen with APX .. Any help would be great ,,,
Click to expand...
Click to collapse
When do you get adb ?

lj50036 said:
When do you get adb ?
Click to expand...
Click to collapse
If you mean what do i get? , just hangs with blinking curser ,,,, i think im total bricked only can get APX mode..

thsire said:
If you mean what do i get? , just hangs with blinking curser ,,,, i think im total bricked only can get APX mode..
Click to expand...
Click to collapse
So no bootloader no recovery just APX ?
That is to bad, sorry to here that.
Thx Josh

Omnirom on ME301T,
Hi,
I have a working ME301T with the latest (yesterday!) Omnirom on it, but......
I broke the glass when I was opening the device to replace a broken speaker.
I found (google is my friend) that these broken speakers cause a crash or reboot every now and then, the rubber comes loose, then the winding cause a short circuit when playing music, that crashes the unit.
So if you want to take your speaker and screen, and use our electronics, you have a working unit again.
Send me a PM with an offer if you are interested.
Un saludo from Spain,
Satbeginner

bricked me301t
Im in need of some help i have an unlocked and rooted me301t went to do a factory reset from the stock recovery screen and when it rebooted all i get is the asus screen and your device is unlocked in the upper left corner. Tried to boot into recovery wont do anything except the asus screen . Tried to put firmware on my sd card but dont know the sku because i cant get to it. can anyone help me to recover this thing and get it working again?/ Thanks in advance..
ps running stock 4.2 and stock recovery or was when it worked. LOL

[Q] Eken t02/t02a equivalent stuck in boot, can't access recovery mode

Bmorn V11, Goclever A73, Eken T02, Aldi Minitab, MyAudio Tablet Series 7, ASK 748SP at the very least look the same and are probably the same tablet. So much so that I ordered a Bmorn touchscreen for my ASk tablet and it worked. ...until I factory reset it from settings a few weeks ago, since then it started freezing up ocasionally and now I get stuck at one of the 3 boot logos but I never see it boot all the way. I hope it's not hardware failing.
I found a button behind the microphone pin-hole after trying vol + and power + home and the like for hours. Can someone please tell me how I get into what i presume is called recovery mode ? I tried pushing that hidden button with the power button, but it doesn't work. Is there even a recovery mode for this device ?
Someone claims there is no recovery mode and vol + and power should work ? So what's the deal with the button behind the mic hole ? http://forum.xda-developers.com/showthread.php?t=1406429 "The device was strangely rooted when I bought it from the retailer. The instruction manual strangely says to boot into recovery mode by holding Vol + and the power button. I called the support company and they said that a recovery needs to be installed first. Using Root Explorer there is no recovery folder. (/recovery) - is there supposed to be?"
I'm on linux, do I really need windows to flash this ? If I fail, can I try again ? I used to get along computers really well, but android is currently totally confusing me. I found several images that might work, but I really don't mind trying out unofficial images. If I can try them one by one I'll figure it out eventually, but I'm afraid I might brick it or something. I've read about flashing bootable SD cards, but I guess that won't work here ? Nor will the images that are supposed to be flashed to an SD card work ?
I guess I'll have to bet on an image and find a Windows (I'm on Linux) machine and the rest is trial and error ?
Is there a page somewhere I could read to figure out the basics ? I feel really confused by all of this. Thank you !
I also found this thread: http://forum.xda-developers.com/showpost.php?p=23769918&postcount=3 which explains how to flash this, but maybe i don't need to go through that if there is a recovery mode ? And it also seems like those instructions are for t01, and it doesn't involve that hidden button at all. I guess this isn't what i need, right ?
I guess this should work:"Turn off your tablet.
You will find upgrade button located in microphone hole on the right side of your device. Press this button using e.g. paper clip. Next connect your device to your PC while
holding upgrade button" (http://www.goclever.com/data/upload..._d4d0bde076ab401d6cb98bb1b77713165b6ffb11.pdf).
I can't turn off my tablet. All I can do is force it to quit by holding the power button for 5 seconds, is that enough ?

I managed to get adb and although lsusb lists the device, I can't connect to it with adb. After a minute or two lsusb doesn't show the device anymore either. Do I need to have debugging enabled or something ? I was hoping to reset it with
Code:
adb shell
recovery --wipe_data