Hello everyone..
I've just replaced the battery for my galaxy S6.. and for some odd reason the touchscreen is not responding anymore. I just disassembled my phone again to see if i disconnected the connector for the LCD/Touchscreen but that is fine. i even disconnected it for 5 minutes to see if that would resolve this issue but no result..
Can anyone please tell me what the problem is? does my phone need a full reset or is there maybe something i've messed up with the motherboard? When i done unscrewing the 13 screws and then continued trying to disassemble the body from its enclosure i did get my "knife" between the LCD and the motherboard at the top of the phone.. could i have messed up something there? Is there any cables or connector between the LCD and the motherboard... if so i have to probably heat the LCD and take it off the body/motherboard.. so please tell me there is nothing between the LCD and body/motherboard..
i hope anyone can help me out here... i really need my phone. the battery is fine and the phone boots up. When i place my thumb on the home button even works! but the screen doesn't...
Thanks in advance.
DavidUK01 said:
Hello everyone.. I've just replaced the battery for my galaxy S6.. and for some odd reason the touchscreen is not responding anymore. I just disassembled my phone again to see if i disconnected the connector for the LCD/Touchscreen but that is fine. i even disconnected it for 5 minutes to see if that would resolve this issue but no result...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3110220
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Related
Hello, I replaced my LCD Nexus 5 screen, but when I closed the phone and turn it on, Im having this screen problem(attached)
the screen "dancing" and something wrong.
Please help, I dont know whats the problem is, I tried "rebuild" it again like 5 times, and always the same problem.
Thanks for help.
Replace the flex cable. They're pretty cheap. If that doesn't work then it's a damaged screen, or in extremely rare cases, it could be a damaged motherboard.
Hi,
I'm not sure if there already is a thread about this problem, so sorry if there is
When I grabbed my Nexus 5 out my pocket, the screen didn´t work. It only shows pixels. I´ve tried to reset it to factory settings using a hard reset but that doesn´t work. It still only shows the pixels. I can´t send it back to LG for repair because I´ve changed the kernel and I can´t get a connection with my pc. Does anybody have any idea how to fix it?
Thanks in advance!
What do you mean by "can only see pixels" ?? Blurry lines?? Distortion?? If so, there's a possibility that the flex cable might have gone bad.. In any case, you need to send it in for repairs.
vin4yak said:
What do you mean by "can only see pixels" ?? Blurry lines?? Distortion?? If so, there's a possibility that the flex cable might have gone bad.. In any case, you need to send it in for repairs.
Click to expand...
Click to collapse
Yes I can only see blurry lines in different colours. But is it possible to repair it by replacing the screen + touch module?
Kleunius said:
Yes I can only see blurry lines in different colours. But is it possible to repair it by replacing the screen + touch module?
Click to expand...
Click to collapse
May be, May be not. No one can know the extent of the damage without opening up the device.
You need professional help. So, it's either Google (if you've bought from play) or LG. There's nothing you can do here as the screen is completely useless. Just send it in and hope for the best.
If you want to backup your data, you could boot up the phone (if you can) and use adb to backup if you've enabled usb debugging. But that's about it..
Good luck!
vin4yak said:
May be, May be not. No one can know the extent of the damage without opening up the device.
You need professional help. So, it's either Google (if you've bought from play) or LG. There's nothing you can do here as the screen is completely useless. Just send it in and hope for the best.
If you want to backup your data, you could boot up the phone (if you can) and use adb to backup if you've enabled usb debugging. But that's about it..
Good luck!
Click to expand...
Click to collapse
Thanks for the info vin4yak!
Kleunius said:
Thanks for the info vin4yak!
Click to expand...
Click to collapse
Sure.. Np.
Let us know how it goes!
Nexus 5 showing only pixels
Hi
Even I am facing the same issue. My nexus 5 is only 4 months old and from the past few days, display is not working consistently. It only shows pixels all over the screen and there is no image at all. Also, there is no physical damage to the phone at all. Although It just fell once recently on its back from a chairs height but it already had a strong spigen slim armor case that provides pretty good protection so i dont think that fall could have caused any internal damage.
A few days after this and after i upgraded to 5.1, I first started to see the screen hanging and then suddenly when i tried to restart, it started showing pixels all over the screen. A few times when i press power button multiple times, then sometimes (say 1 out of 20 times or even less) ,home screen appears but even then it does not work. I am very frustrated with the problem and not sure what could be the issue. Could you please let me know what could be the problem. I have shown it to some repair shops but it looks like they are just looking to grab money and they simply tell me that they can replace display.
So i thought its better to post it here in xda to get feedback on this. Please can you let me know what could be problem, is it hardware or software issue and how it could be resolved. Please help me urgently as I am not able to use the phone.
Thanks.
Hey guyz. My core 2's digitizer was damaged from a dog bite. So i tried to change the digitizer by myself. There is a connector which the flex cable of the digitizer connects with the lcd. I broke that small square shaped connecter. Now the phone turns on to lock screen. Bt after about 10 seconds it hangs. I cannot connect it to kies. I need my contacts in the internal memory. What do u think i should do ? Does the phone needs the digitizer to work properly. I meant is that the reason it hangs ?
Hi
Thanks for writing to us at XDA Assist. I think the only thing you can do is repair/replace the part that was damaged. Yes, the phone requires all parts to be working properly in order to function. If you're not confident enough to undertake the repair yourself it might be a good idea to take it to a professional.
No response in two days, thread closed.
Hi, im new in this Forum and this is my first post, i need help with someone who knows about it. My Moto G2 has suffer watter damage, the phone starts up normally and all other functions work normally too, the problem is that the Frame, the Screen and the Touch doesn't work.
The screen flashes when i connect the charger and why is that? The screen is black all the time and flashes when the charger is connected.
Is there something inside the logic board that have to see with the Touch? or with the Screen?
I have opened my phone and nothing seems burned in the logic board, i haven't see the Frame or the Screen.
Thanks in advance.
MrPollito said:
Hi, im new in this Forum and this is my first post, i need help with someone who knows about it. My Moto G2 has suffer watter damage, the phone starts up normally and all other functions work normally too, the problem is that the Frame, the Screen and the Touch doesn't work.
The screen flashes when i connect the charger and why is that? The screen is black all the time and flashes when the charger is connected.
Is there something inside the logic board that have to see with the Touch? or with the Screen?
I have opened my phone and nothing seems burned in the logic board, i haven't see the Frame or the Screen.
Thanks in advance.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
It'll be better to send the phone for service.
___
v7
XDA Assist
The Technicals said to me to just replace the display, but my worry is if theres something failing in the logic board.
MrPollito said:
The Technicals said to me to just replace the display, but my worry is if theres something failing in the logic board.
Click to expand...
Click to collapse
I've requested to move your thread to the appropriate forum.You'll get support from the experts there.
___
v7
XDA Assist
I have a samsung s4 and for some reason the lcd dosent come on. The digitizer is fine as the phone still responds to touches. I also get output when using MHL. I was able to get the screen to come back on by disasembling the phone and cleaning the lcd cables but the next day the screen has stoped working. I am wondering if maybe it was me removing the battery that gave me my screen back so i have removed the battery and am waiting an hour. Is there anyone who can help me with this. I dont think its a hardware issue at this point.
bubese70 said:
I have a samsung s4 and for some reason the lcd dosent come on. The digitizer is fine as the phone still responds to touches. I also get output when using MHL. I was able to get the screen to come back on by disasembling the phone and cleaning the lcd cables but the next day the screen has stoped working. I am wondering if maybe it was me removing the battery that gave me my screen back so i have removed the battery and am waiting an hour. Is there anyone who can help me with this. I dont think its a hardware issue at this point.
Click to expand...
Click to collapse
Greetings and welcome to assist. Does your screen come on when in recovery or download modes ? If it does then reflashing stock rom should fix it, if it doesn't work in recovery/download mode then it will probably be hardware related
Regards
Sawdoctor
Nope nothing in both download and recovery. I guess the lcd is just dead oh well.