PERMANENT IMEI SOLUTION
HELLO GUYS,I COME UP WITH THE WORKING SOLUTION OF IMEI FOR THOSE PEOPLE WHO LOST THEIR IMEI DURING SYSTEM PARTITION INCREASE OR DUE TO ANY SUCH CAUSE.TRY THIS ONLY WHEN YOU ARE IN LOST IMEI STATE.
TIPS-
AS IT CAN ONLY USED WHEN YOU ARE IN LOST IMEI STATE,BUT IF YOU RESTORED YOUR IMEI BY NON-PERMANET METHOD ROOT EXPLORER COPY PASTE AND WANTS DO DO THIS THEN TAKE CWM BACKUP AND FLASH A NEW ROM AND THEN FOLLOW THESE STEPS THEN AFTER SUCESSFUL IMEI RESTORED,RESTORE YOUR CWM BACKUP BUT I AM NOT SURE ABOUT THIS SO DO IT ON YOUR RISK OR TRY AFTER ANY NEW ROM INSTALL.
-------DOWNLOAD-LINKS--------
[CDC_DRIVERS_BY_DIGYVIJAY(see below attachment)
USB_Drivers_MMX_A110Q(see below attachment)
IMEI FILES
IMEI TOOL
NOTE-INSTALL BOTH DRIVERS
STEPS OF INSTALLNG DRIVERS:-
DRIVER1(CDC_DRIVERS_BY_DIGYVIJAY)-
EXTRACT CDC_DRIVERS_BY_DIGYVIJAY INTO A FOLDER
SWITCH OFF PHONE AND REMOVE BATTERY AND INSERT BATTERY AND DO NOT POWER ON.
NOW OPEN DEVICE MANAGER IN PC,THEN CONNECT YOUR PHONE,IT WILL SHOW A "CDS" AS UNKNOWN DEVICE.
BE QUICK HERE AND RIGHT CLICK AND CHOOSE UPDATE DRIVER.
CHOOSE BROWSE MANUALLLY OPTION IN THE WINDOW OPENED.
BROWSE MY DRIVER 1 EXTRACTED FOLDER AND SELECT IT AND CHOOSE INSTALL IT.
WAIT FOR SOME MINUTES,AFTER THAT IT WILL SHOW DRIVER INSTALLED SUCESSFULLY
IF ANYBODY CANNOT FIND NEW "CDS" AS UNKNOWN DEVICE IN DEVICE MANAGER THEN BEFORE DOING
THESE ALL STEPS,START IMEI TOOL AND PUT IMEI & BROWSE IMEI FILES(SEE STEPS BELOW) THEN CHOOSE START AND PLUG IN YOUR DEVICE IN OFF STATE(BATTERY REMOVED AND INSERTED).BUT IT WILL NOT START.NOW OPEN DEVICE MANAGER.YOU WILL FIND WHAT ARE YOU LOOKING FOR.
DRIVER 2(USB_Drivers_MMX_A110Q)
(IT IS MMX USB PRELOADER DRIVER,WHICH MAY YOU INSTALLED EARLIER,IF NOT THEN FOLLOW PROCESS-
EXTRACT USB_Drivers_MMX_A110Q IN A FOLDER
TURNOFF YOUR PHONE,OPEN DEVICE MANAGER
PLUG DEVICE THEN A NEW DEVICE WILL APPEAR IN DEVICE MANAGER LIKE-MT65XX PRELOADER
BE QUICK HERE AND RIGHT CLICK ON IT AND CHOOSE UPDATE DRIVE.
CHOOSE BROWSE MANUALLY IN NEW WINDOW OPENED
BROWSE TO THE EXTRACTED FOLDER AND INSTALL IT.
NOW AFTER BOTH DRIVERS INSTALLED,LETS GO TO MAIN THING-
STEPS:-
EXTRACT IMEI_FILES AND IMEI TOOLS.
NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe) WITH RUN AS ADMINISTRATOR.
NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB
IN IMEI TOOL TICK IMEI 1 AND IMEI 2 AND WRITE YOUR BOTH UR IMEI(FIND IMEI ON BILL,BOX,OR UNDER BATTERY)
NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER(IMEI FILE EXTRACTED)---DATABASE.
SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START .
NOW SWITCH OFF UR CELL AND REMOVE BATTERY AND INSERT IT AGAIN THEN CONNECT.
AFTER PROCESS FINISH REMOVE DEVICE AND REBOOT.
SOME NOTES:-
1)THIS WILL WORK ON ALL MEDIATEK DEVICES,BUT FOR OTHER DEVICE PLEASE CHANGE THEIR DATABASE FILES,THEY CAN FIND THEIR DATABASE FILES UNDER THEIR STOCK ROM FLASHABLE VIA SP FLASH TOOL.
2)AFTER THIS PROCESS YOU WILL NEVER LOOSE YOUR IMEI AFTER ANY CUSTOM ROM INSTALLATION VIA CWM.
3)YOU WILL ONLY LOOSE YOUR IMEI WHEN YOU USE SP FLASH TOOL METHOD TO FLASH ROM OR INCRESE PARTITION METHOD AGAIN.
100% WORKING & TESTED.
PRESS THANKS
CREDITS-
IMEI TOOL CREATOR
DIGYVIJAY KUMAR
Helper & Supportive Dev @tech mashido[
DO AT YOUR OWN RISK,I WILL NOT BE RESPONSIBLE FOR ANYTHING HAPPENS TO YOU DEVICE.
error
error enter meta mode fail
bhartendra said:
error enter meta mode fail
Click to expand...
Click to collapse
check CDC drivers installed or not.....or reinstall CDC drivers
Meta Mode Fail
digyvijaykumar123 said:
check CDC drivers installed or not.....or reinstall CDC drivers
Click to expand...
Click to collapse
all drivers are installed successfully but still MetaMode fail error..
it work on canvas2 yes or no plz reply
---------- Post added at 05:00 AM ---------- Previous post was at 04:55 AM ----------
srs1434 said:
all drivers are installed successfully but still MetaMode fail error..
Click to expand...
Click to collapse
i m agree with u
Is it worked for any one...If yes I would like to try it once coz every time I install new ROM my imei will be lost, since I have backup of IMEI every time I need to restore this backup file from Mobile uncle tool. Which is annoying process after every new ROM installation.
same error here and the driver are installed!
digyvijaykumar123 said:
PERMANENT IMEI SOLUTION
HELLO GUYS,I COME UP WITH THE WORKING SOLUTION OF IMEI FOR THOSE PEOPLE WHO LOST THEIR IMEI DURING SYSTEM PARTITION INCREASE OR DUE TO ANY SUCH CAUSE.TRY THIS ONLY WHEN YOU ARE IN LOST IMEI STATE.
TIPS-
AS IT CAN ONLY USED WHEN YOU ARE IN LOST IMEI STATE,BUT IF YOU RESTORED YOUR IMEI BY NON-PERMANET METHOD ROOT EXPLORER COPY PASTE AND WANTS DO DO THIS THEN TAKE CWM BACKUP AND FLASH A NEW ROM AND THEN FOLLOW THESE STEPS THEN AFTER SUCESSFUL IMEI RESTORED,RESTORE YOUR CWM BACKUP BUT I AM NOT SURE ABOUT THIS SO DO IT ON YOUR RISK OR TRY AFTER ANY NEW ROM INSTALL.
-------DOWNLOAD-LINKS--------
[CDC_DRIVERS_BY_DIGYVIJAY(see below attachment)
USB_Drivers_MMX_A110Q(see below attachment)
IMEI FILES
IMEI TOOL
NOTE-INSTALL BOTH DRIVERS
STEPS OF INSTALLNG DRIVERS:-
DRIVER1(CDC_DRIVERS_BY_DIGYVIJAY)-
EXTRACT CDC_DRIVERS_BY_DIGYVIJAY INTO A FOLDER
SWITCH OFF PHONE AND REMOVE BATTERY AND INSERT BATTERY AND DO NOT POWER ON.
NOW OPEN DEVICE MANAGER IN PC,THEN CONNECT YOUR PHONE,IT WILL SHOW A "CDS" AS UNKNOWN DEVICE.
BE QUICK HERE AND RIGHT CLICK AND CHOOSE UPDATE DRIVER.
CHOOSE BROWSE MANUALLLY OPTION IN THE WINDOW OPENED.
BROWSE MY DRIVER 1 EXTRACTED FOLDER AND SELECT IT AND CHOOSE INSTALL IT.
WAIT FOR SOME MINUTES,AFTER THAT IT WILL SHOW DRIVER INSTALLED SUCESSFULLY
IF ANYBODY CANNOT FIND NEW "CDS" AS UNKNOWN DEVICE IN DEVICE MANAGER THEN BEFORE DOING
THESE ALL STEPS,START IMEI TOOL AND PUT IMEI & BROWSE IMEI FILES(SEE STEPS BELOW) THEN CHOOSE START AND PLUG IN YOUR DEVICE IN OFF STATE(BATTERY REMOVED AND INSERTED).BUT IT WILL NOT START.NOW OPEN DEVICE MANAGER.YOU WILL FIND WHAT ARE YOU LOOKING FOR.
DRIVER 2(USB_Drivers_MMX_A110Q)
(IT IS MMX USB PRELOADER DRIVER,WHICH MAY YOU INSTALLED EARLIER,IF NOT THEN FOLLOW PROCESS-
EXTRACT USB_Drivers_MMX_A110Q IN A FOLDER
TURNOFF YOUR PHONE,OPEN DEVICE MANAGER
PLUG DEVICE THEN A NEW DEVICE WILL APPEAR IN DEVICE MANAGER LIKE-MT65XX PRELOADER
BE QUICK HERE AND RIGHT CLICK ON IT AND CHOOSE UPDATE DRIVE.
CHOOSE BROWSE MANUALLY IN NEW WINDOW OPENED
BROWSE TO THE EXTRACTED FOLDER AND INSTALL IT.
NOW AFTER BOTH DRIVERS INSTALLED,LETS GO TO MAIN THING-
STEPS:-
EXTRACT IMEI_FILES AND IMEI TOOLS.
NOW OPEN IMEI TOOL ( IMEI&SN Writer.exe) WITH RUN AS ADMINISTRATOR.
NOW IN PLATFORM SELECT SMARTPHONE AND SELECT USB
IN IMEI TOOL TICK IMEI 1 AND IMEI 2 AND WRITE YOUR BOTH UR IMEI(FIND IMEI ON BILL,BOX,OR UNDER BATTERY)
NOW CLICK ON SELECT DB AND BROWSE TO THE FOLDER(IMEI FILE EXTRACTED)---DATABASE.
SELECT THE FILE WHICH IS IN DATABASE FOLDER AND AGAIN IT ASK U TO SELECT AP FILE
THEN SELECT FILE WHICH IS IN AP FOLDER AND CLICK ON START .
NOW SWITCH OFF UR CELL AND REMOVE BATTERY AND INSERT IT AGAIN THEN CONNECT.
AFTER PROCESS FINISH REMOVE DEVICE AND REBOOT.
SOME NOTES:-
1)THIS WILL WORK ON ALL MEDIATEK DEVICES,BUT FOR OTHER DEVICE PLEASE CHANGE THEIR DATABASE FILES,THEY CAN FIND THEIR DATABASE FILES UNDER THEIR STOCK ROM FLASHABLE VIA SP FLASH TOOL.
2)AFTER THIS PROCESS YOU WILL NEVER LOOSE YOUR IMEI AFTER ANY CUSTOM ROM INSTALLATION VIA CWM.
3)YOU WILL ONLY LOOSE YOUR IMEI WHEN YOU USE SP FLASH TOOL METHOD TO FLASH ROM OR INCRESE PARTITION METHOD AGAIN.
100% WORKING & TESTED.
PRESS THANKS
CREDITS-
IMEI TOOL CREATOR
DIGYVIJAY KUMAR
Helper & Supportive Dev @tech mashido[
DO AT YOUR OWN RISK,I WILL NOT BE RESPONSIBLE FOR ANYTHING HAPPENS TO YOU DEVICE.
Click to expand...
Click to collapse
It's full of BULL**** ADS & POP-UPS the download links.......... Don't post if you want to waste users time instead of helping them.... Utter nonsense
Hello again XDA, kirito9 here with another guide on how to root the Alcatel One Touch T'pop. I decided to make a guide because i have not seen any guide on XDA concerning this phone and rooting.
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
- Windows 7 PC ( tested only on this)
- ADB drivers
- MTK drivers
- MT6575 Scatter file
- CWM or TWRP recovery
- SP Flash Tools
- SuperSU
Lets Begin
Flashing CWM or TWRP
1. First thing to do is to make sure all required drivers are installed. Do that by downloading the Universal ADB driver from this link and install it.
2. Then install the MTK drivers so that SP flash tools can work. Get those here, extract and install the drivers for windows 7.
3. Download your preferred recovery either CWM or TWRP below and place somewhere on your computer where you can find it easily.
4. Download the SP flash tools here and extract them.
5. Download the MT6575 Scatter file attached below.
6. Download the SuperSU zip file and place it either on internal or external of the phone.
6. Go to the sp flash tools folder and run flashtool.exe as administrator.
7. Click on scatter loading and select the MT6575 scatter file you downloaded.
8. Click on the recovery checkbox and then click on the white space in location. Select the recovery of your choice.
9. Turn off the phone, remove the battery then reinsert it.
10. Click on download and then connect the phone.
11. Wait for the flashing to complete then remove your phone.
Rooting the phone.
1. Boot into recovery then go to install, select the SuperSu zip file and install it.
2. After the flashing is complete, reboot your phone and see the SuperSU app in the app drawer
Credits
- me
-Chainfire for his SuperSu
May you also upload any stock ROM for OT-4010D ???
Root : JB 4.2
Root LAVA iris 300
1. Download The Framaroot APK here and install it to your phone.
2. Goto Settings > Security > and tick “Unknown Sources“.
3. Run Framaroot, choose Superuser or SuperSU.
4. Select Boromir or Bahamir.
5. You will see Success.
6. Reboot device, Done. :good:
OR
1. Download The Kingoroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Stock Rom : JB 4.2
Unbrick your LAVA iris 300
1. Download Stock Rom from here (by xdafirmware)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (dnt press any key, flash with battery).
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your LAVA iris 300
You can take full backup with Custom recovery (Carliv/TWRP).
OR
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet+ andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see “Developer options” there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.
10. Prepare this backup to make it flashable through SP Flash Tool. To do it, click on To 'prepare blocks for Flash Tool.'
11. A new windows will appear asking for a .md5 file of the backup. So navigate to the MTK Droid Tools folder where your backup is found. Open the backup that your have created earlier and select the files.md5 click open.
12. Wait for MTK Droid Tools to copy the files for SP Flash Tool, check the status messages until the copying/task is complete. Done
Full Instructions with images here (by rajit).
Restore :
1. Open , SP Flash Tool.exe run as administrator. Load the scatter file (click scatter-loading) which you have prepared from MTK Droid Tools to be flashable through SP Flash Tool.
2. After you loaded scatter file, All must checked except for Cache and USERDATA and most importantly, do not check DSP_BL or Preloader else you'll brick it.
3. To restore device, click Download from SP Flash Tool, a prompt will appear, just click Yes. Immediately connect your Power OFF device to your computer via USB .
4. Wait for the tool to detect your device and restore the Stock ROM that you have made. An alert with a green circle appears after successfully downloading the restore.
Full Instructions with images here (by MTK Hacker Pro).
Custom Recovery : TWRP/CTR
( Download and flash it with Sp FLash tool. Press Vol up and Power Key to boot in Recovery. )
Twrp for LAVA iris 300
TWRP2.8.0 alpha here
Note : There is lots of bug in it. pls post here.
CTR for LAVA iris 300
Carliv 2.4 alpha here
Note : Flipped Screen Bug.
wahh! Now just make a best kitkat rom for 300 plz!! ur gr8
Here i am presenting the easy method how to flash stock rom by using SP flash tool
Recommendation :-
1. PC with installed USB Drivers
2. SP Flashtool herehttps://drive.google.com/file/d/0B-0BFYGPDi0YcWpNOE90a216enM/view?usp=sharing
Procedure :-
1. Download And Install USB drivers On Your Computer In Case of Already Installed skip this Step.
2. Power off your android smart phone and remove the battery.
3. download the STOCK ROM and extract on your PC.
4. also extract the SP Flash tool and Open ' Flash Tool exe"
5. Once the Flash tool is Launched click on "download"
6. After click on "scatter loading File" Tab.
7. Locate the "Scatter.txt" location in Which U can extract Your stock rom.
8. NOW,click on "DOWNLOAD" Tab.
9. Connect Your Computer By Using Data cable without battery
10. IN some micromax mobiles Tool will start To download without battery.
BUT, in some mobiles like my KARBONN TITANIUM S5 ULTRA Device Download will start After insert the Battery.
So, please kindly note this step.
11. Congratulation U Can successfully flash your STOCK ROM.
Kip Mind,
[SIZE=''3"] 1. The following steps are works only the stock and custom rom which comes with the scatter file.
2. please, full Backup your Device through stock or custom recovery.
3. This backup will helps to recover your IMEI.
4. In case of lost IMEI Restore previous Backup.
[/SIZE]
Credits:-
shubham shahu .
Hit thankx If u Like my Work :good:
Hi all,
For all those who are facing problems with annoying surveys, asking passwords for rar files and then facing problems in installing rom (problems faced by me). Here comes the genuine firmware file for IKON IK543
Warning: Before going any further please note that neither me nor xda will be responsible if your phone gets bricked in this process
So let us start the process.
1. Download ikon firmware from here and extract it.
2. Download SP Flash Tool latest version from here or direct link here and extract it(credit:android mtk)
3. Download USB drivers from here and install appropriate drivers.
4. Open flash_tool.exe from SP flash tool folder. (note: run as administrator)
5. Select scatter-loading and select the scatter file from the extracted firmware folder.
6. Manually select all the files in the sp flash tool.(sorry for the trouble)
7. Select Format All+Download and select download.
8. Wait for the file to be flashed. Once it is done green circle will appear and done.
Enjoy!!!!
For those who face invalid IMEI follow this procedure.
1. Open Dailer on your phone and hit *#*#3646633#*#*
2. Click on "CONNECTIVITY"
3. Click on "CDS INFORMATION"
4. click on "RADIO INFORMATION"
5. then to "PHONE 1" write inThe IMEI is under the battery.)AT +EGMR=1,7,"00000000000" (Replace "zeros" with your own IMEI No.) then restart the phone.
6. Follow 1 to 5 and then "PHONE 2" and write in:
AT +EGMR=1,10,"0000000000" (Replace "zeros" with your own IMEI No.)
For reference you can see this video here
Then reboot and done.
Enjoy!!!