can some1 tell me how to boot on recovery mode? pls tell me.. pls pls pls pls i want to install clockwerkmod thanks in advance :good:
.
im using cherry mobile amethyst s610.. i search everything in the google.. nothing happens..
How to Root and install CWM
I'm also using Cherry Mobile amethyst and i already rooted and installed CWM recovery. I'm going to teach u how to do that. but i used the ROM Manager Pro to go to the Recovery Mode.
1. You have to Root your android phone using Framaroot (Latest version) and you have to download and install the ROM Manager Pro.
Note: Warranty Void
http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 from: alephzain
- Just click the word "Barahir" and wait for the confirmation successfully rooted and reboot your phone.
2. After That, You need to Download the "MTK Droid Tools" , "SP Flash Tools" and MTK Driver. (Search the net for Download)
-install the MTK Driver, Wait for the automatic detection of the device and Click manual install then go to downloaded drivers.
3.Open MTK Droid Tools, then wait to process the Phone Information. You have to Click the "BLOCKS MAP" and after the other window Pop-up with Block Info, Click "SCATTER FILE". This File should be save because it is very important for your device with the name "MT6572_Android_scatter_emmc.txt". Do not Close the MTK Droid Tool.
4. Open the SP Flash Tool, Click "Scatter-Loading" and search the file that you saved earlier with the name "MT6572_Android_scatter_emmc.txt" and Go to "READ BACK TAB". Click "ADD" and the file added at the bottom and Click the File and save it as "ROM_0". You should turn off your Phone. Then Connect it to USB Cable, Unplug the battery first then Click the "Read back Button" and Plug the battery to detect the device and this will be done successfully. You do have "ROM_0" File. DOnt Close SP Flash Tool.
5. Go back to MTK Droid Tools, you can now backup you phone first.Go to "root, backup, recovery" tab, Click "To Process File ROM_* from flash Tool" and select the "ROM_0" you saved earlier. Wait for the task to complete, When the message box appear "Do you want cwm automatically installed", just click "YES".
(Do it with your own Risk, Note: I am not responsible for any Damage, Lost of your data, The Process of flashing will reset your phone into factory reset or it can brick your phone when the procedure is wrong.)
6. After that you can re-flash your stock ROM.Go to SP Flash Tool Again, Then Click Again the "Scatter-Loading" and go to the MTK Droid Tool" Folder named "backup", you will see the backup file you saved a while ago when you process the "ROM_0" File. Open The Folder with the name "S610_******_backup" or "S610_******_ForFlashtoolFromReadBack", you will see the file "MT6572_Android_scatter_emmc.txt" again". after that, all the IMAGE File from your phone will appear on the bottom of SP Flash Tool, Look the name "recovery", if it has File Location, Just chage it, go to "MTK Droid Tool" Folder then open "recovery" folder, you will see the file named "S610_******__recovery_140423-203622.img" and rename it to "recovery.img".
7.Just Click the "Download" button and Unplug and Plug your battery again to detect the Phone. wait it until it done.
8. After the Process completed, Open your Device, install ROM Manager Pro, and when installation completed. Open the Application and Click Reboot into Recovery.
9. The Phone Will reboot and now go to Recovery mode
10. Goodluck
yuwishinu said:
I'm also using Cherry Mobile amethyst and i already rooted and installed CWM recovery. I'm going to teach u how to do that. but i used the ROM Manager Pro to go to the Recovery Mode.
1. You have to Root your android phone using Framaroot (Latest version) and you have to download and install the ROM Manager Pro.
Note: Warranty Void
http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 from: alephzain
- Just click the word "Barahir" and wait for the confirmation successfully rooted and reboot your phone.
2. After That, You need to Download the "MTK Droid Tools" , "SP Flash Tools" and MTK Driver. (Search the net for Download)
-install the MTK Driver, Wait for the automatic detection of the device and Click manual install then go to downloaded drivers.
3.Open MTK Droid Tools, then wait to process the Phone Information. You have to Click the "BLOCKS MAP" and after the other window Pop-up with Block Info, Click "SCATTER FILE". This File should be save because it is very important for your device with the name "MT6572_Android_scatter_emmc.txt". Do not Close the MTK Droid Tool.
4. Open the SP Flash Tool, Click "Scatter-Loading" and search the file that you saved earlier with the name "MT6572_Android_scatter_emmc.txt" and Go to "READ BACK TAB". Click "ADD" and the file added at the bottom and Click the File and save it as "ROM_0". You should turn off your Phone. Then Connect it to USB Cable, Unplug the battery first then Click the "Read back Button" and Plug the battery to detect the device and this will be done successfully. You do have "ROM_0" File. DOnt Close SP Flash Tool.
5. Go back to MTK Droid Tools, you can now backup you phone first.Go to "root, backup, recovery" tab, Click "To Process File ROM_* from flash Tool" and select the "ROM_0" you saved earlier. Wait for the task to complete, When the message box appear "Do you want cwm automatically installed", just click "YES".
(Do it with your own Risk, Note: I am not responsible for any Damage, Lost of your data, The Process of flashing will reset your phone into factory reset or it can brick your phone when the procedure is wrong.)
6. After that you can re-flash your stock ROM.Go to SP Flash Tool Again, Then Click Again the "Scatter-Loading" and go to the MTK Droid Tool" Folder named "backup", you will see the backup file you saved a while ago when you process the "ROM_0" File. Open The Folder with the name "S610_******_backup" or "S610_******_ForFlashtoolFromReadBack", you will see the file "MT6572_Android_scatter_emmc.txt" again". after that, all the IMAGE File from your phone will appear on the bottom of SP Flash Tool, Look the name "recovery", if it has File Location, Just chage it, go to "MTK Droid Tool" Folder then open "recovery" folder, you will see the file named "S610_******__recovery_140423-203622.img" and rename it to "recovery.img".
7.Just Click the "Download" button and Unplug and Plug your battery again to detect the Phone. wait it until it done.
8. After the Process completed, Open your Device, install ROM Manager Pro, and when installation completed. Open the Application and Click Reboot into Recovery.
9. The Phone Will reboot and now go to Recovery mode
10. Goodluck
Click to expand...
Click to collapse
thanks a lot !!!!! u're such a big help!! :good:
oh yeah, i forgot.. did you boot on downloading mode or you just turn off your phone?
Help! i need stock rom for amethyst
sr, can you up your amethyst stock rom backup,.here plsssss? im stock at boot logo,.,help plssss,., thanks,.
Heaven0918 said:
sr, can you up your amethyst stock rom backup,.here plsssss? im stock at boot logo,.,help plssss,., thanks,.
Click to expand...
Click to collapse
try flashing the rom again
please upload stockrom.. im on bootloop no cwm recovery yet.. huhuhuhu
please need stock rom for amethyst im in boot loop too :crying::crying::crying::crying::crying:
thread: [q] cherry mobile amethyst s610 Logged in as shield89 Image Verification
balot.ko said:
try flashing the rom again
Click to expand...
Click to collapse
what is the shortcut keys for recovery mode? you can't do it if hangups to boot logo...
balot.ko said:
can some1 tell me how to boot on recovery mode? pls tell me.. pls pls pls pls i want to install clockwerkmod thanks in advance :good:
Click to expand...
Click to collapse
mobile uncle tool po tas recovery.img po.. pag mag CWM.. )
Volume up+Powerbutton (hold) saksak mo Charger, wait.
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool (5.x).
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Hi,
Thank you for uploading this, I have problems too with my Nokia 3 TA-1032. It's different case than yours, but still I can't turn it on. Can you please write down, how exactly I supposed to run your script in Python3? I have difficulties to extract files. Thank you very much forwardly
JustAGuyWithAndroidPhone said:
Hi,
Thank you for uploading this, I have problems too with my Nokia 3 TA-1032. It's different case than yours, but still I can't turn it on. Can you please write down, how exactly I supposed to run your script in Python3? I have difficulties to extract files. Thank you very much forwardly
Click to expand...
Click to collapse
I'm assuming you are using Windows.
First, download Python 3 from here, then open the downloaded file to install Python.
While installing, if you see a checkbox that say "Add to PATH", check it. Then proceed to complete your installation.
After installing, download the "nb0 unpack script" to the same folder/directory as the firmware file (.nb0).
In that folder/directory, hold Shift and right-click on the file explorer, then click "Open powershell window here" or "Open command window here" (example).
Then type this into the command window (if you have changed the files' name, you also have to change them in the command)
Code:
python nb0-unpack.py NE1-215H-0-00WW-B02.nb0
huupoke12 said:
I'm assuming you are using Windows.
First, download Python 3 from here, then open the downloaded file to install Python.
While installing, if you see a checkbox that say "Add to PATH", check it. Then proceed to complete your installation.
After installing, download the "nb0 unpack script" to the same folder/directory as the firmware file (.nb0).
In that folder/directory, hold Shift and right-click on the file explorer, then click "Open powershell window here" or "Open command window here" (example).
Then type this into the command window (if you have changed the files' name, you also have to change them in the command)
Code:
python nb0-unpack.py NE1-215H-0-00WW-B02.nb0
Click to expand...
Click to collapse
Thank you very much for your advice, the unpacking worked, but the flash not somehow. Here is a picture about what Error code I get.
JustAGuyWithAndroidPhone said:
Thank you very much for your advice, the unpacking worked, but the flash not somehow. Here is a picture about what Error code I get.
Click to expand...
Click to collapse
You didn't select the "Download-Agent" as the Download Agent file from the link on my post. You are using the default Download Agent file of SP Flash Tool. You may also want to download the latest version of SP Flash Tool.
huupoke12 said:
You didn't select the "Download-Agent" as the Download Agent file from the link on my post. You are using the default Download Agent file of SP Flash Tool. You may also want to download the latest version of SP Flash Tool.
Click to expand...
Click to collapse
Yes, you right, because the SP tool don't accept that. Here is a pic about that:
I downloaded the latest SP tool from the link above here in your post.
JustAGuyWithAndroidPhone said:
Yes, you right, because the SP tool don't accept that. Here is a pic about that:
I downloaded the latest SP tool from the link above here in your post.
Click to expand...
Click to collapse
Can you try placing the files to a "legacy-compatible" directory (no spaces, only ASCII characters (like a password)). For example, try placing the files (download agent, firmware, SP Flash Tool) in "C:\phone\nokia3\".
Yes, I relocated as you writed down, and now the download agent is accepted (that one which you linked here above), in an earlier version from the Flashtool, not the latest one. Flashing still need authorization file somehow. ( I tried to flash a rom with Authorization file needed, probably that going to be the reason. Originally I wanted to downgrade my Nokia 3 TA-1032)
huupoke12 said:
Can you try placing the files to a "legacy-compatible" directory (no spaces, only ASCII characters (like a password)). For example, try placing the files (download agent, firmware, SP Flash Tool) in "C:\phone\nokia3\"
Click to expand...
Click to collapse
Yes, I relocated as you writed down, and now the download agent is accepted (that one which you linked here above), in an earlier version from the Flashtool, not the latest one. Flashing still need authorization file somehow. ( I tried to flash a rom with Authorization file needed, probably that going to be the reason. Originally I wanted to downgrade my Nokia 3 TA-1032)
huupoke12 said:
Can you try placing the files to a "legacy-compatible" directory (no spaces, only ASCII characters (like a password)). For example, try placing the files (download agent, firmware, SP Flash Tool) in "C:\phone\nokia3\".
Click to expand...
Click to collapse
I have mistakenly deleted the os of my Nokia 3. PLEASE HELP!!!
The SP Flash tool is still not accepting the download agent!
PLEASE HELP!
Nokia3root said:
I have mistakenly deleted the os of my Nokia 3. PLEASE HELP!!!
The SP Flash tool is still not accepting the download agent!
PLEASE HELP!
Click to expand...
Click to collapse
If you have done the steps exactly as in my instruction and it still fail, then I can't help you anymore. Your phone may be in a different state than mine.
I have successfully unbricked my Nokia 3 (in a constantly restart cycle) on Arch Linux (I don't use Windows). If you want to give it a try, and if you are used to Windows User Interface, I recommend Linux Mint Cinnamon (Ubuntu is another popular choice, but its User Interface is very different from Windows, and Arch Linux is not easy to install if you are not used to command line interface and have some Linux knowledge).
huupoke12 said:
If you have done the steps exactly as in my instruction and it still fail, then I can't help you anymore. Your phone may be in a different state than mine.
I have successfully unbricked my Nokia 3 (in a constantly restart cycle) on Arch Linux (I don't use Windows). If you want to give it a try, and if you are used to Windows User Interface, I recommend Linux Mint Cinnamon (Ubuntu is another popular choice, but its User Interface is very different from Windows, and Arch Linux is not easy to install if you are not used to command line interface and have some Linux knowledge).
Click to expand...
Click to collapse
ok, i will try
huupoke12 said:
I'm assuming you are using Windows.
First, download Python 3 from here, then open the downloaded file to install Python.
While installing, if you see a checkbox that say "Add to PATH", check it. Then proceed to complete your installation.
After installing, download the "nb0 unpack script" to the same folder/directory as the firmware file (.nb0).
In that folder/directory, hold Shift and right-click on the file explorer, then click "Open powershell window here" or "Open command window here" (example).
Then type this into the command window (if you have changed the files' name, you also have to change them in the command)
Code:
python nb0-unpack.py NE1-215H-0-00WW-B02.nb0
Click to expand...
Click to collapse
I am unable to extract the files! PLEASE HELP!!!
huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install `python3` if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
THANK YOU VERY MUCH, BROTHER!!!!!!!!!!!!!
It worked!!
Now just have my story..... Actually, this was my friend's Nokia 3 which he gave me to root and I convinced him that I would root it and convinced him that there was no risk in it. Then I rooted the device for him very hardly but then I mistakenly deleted the os of the phone and then I searched the whole internet and found your post.... First of all, I got many errors while unpacking the nb0 file as I was using python 3.0, so I downloaded the python 3.8 installer but it wouldn't install because it was saying that that Service pack 1 was not installed in my Windows 7 but it was, hence I got very irritated and observed the log file and downloaded an update (KB3033929). Then I installed python 3.8 and thus I come to have a working mobile! I again rooted it and gave it to my friend and told him about these happenings.
Once again thank you very much!!! You saved my respect!!
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. how can download scripte ?
majd11 said:
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. how can download scripte ?
Click to expand...
Click to collapse
Right-click on the "Raw" button at the top-right corner, and select "Save link as".
huupoke12 said:
Right-click on the "Raw" button at the top-right corner, and select "Save link as".
Click to expand...
Click to collapse
Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
please help me how do that ?? run the script with .nb0 can you make the vedio please
majd11 said:
Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
please help me how do that ?? run the script with .nb0 can you make the vedio please
Click to expand...
Click to collapse
Read #3 and #13
(#13 is correct, he just downloaded a wrong python version)
huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
my nokia phone is Ta-1032 mtk 6737 and the firmware in the link is mtk 6735 can I use this on my phone MTK 6737??
huupoke12 said:
I have managed to revive my "black screen, constantly restart" Nokia 3 (TA-1032). Actually the hard part is to find the correct firmware and DA file. So this will mostly be a resource sharing post than a fully guide.
Things needed:
Firmware (Source)
SP Flash Tool
Download Agent (Source)
nbo unpack script
Latest Python 3 (If you are using a Linux distro, it is most likely to be preinstalled).
Note that Python 3 means Python 3.x(.y), not Python 3.0.
If you are using Windows 7, you can only use Python < 3.9.
Steps:
Download (and install) SP flash tool.
Download firmware, the download agent and the script.
Extract the downloaded firmware
Install Python 3 if you haven't. Run the script with the downloaded firmware (.nb0) path as the argument. It will extract the files.
Run SP flash tool (with root/admin privilege).
In the Download tab: Select the "Download Agent" as the downloaded "Download Agent" file from the above link. Select the "Scatter-loading file" as the scatter file from the extracted firmware. And select "Download Only" mode. ("Authenication File" can be left empty). Just let it be the default (all boxes checked, even preloader).
Plug the phone into the computer and click "Download". If the tool just stucks at 0%, or any error occurs that prevent the flash from starting, press and hold both the POWER and VOL UP button on the phone for about 10 secs, and it will be restarted. The click "Download" again (try it again if the error still occurs).
After done with flashing (green tick), close the program and disconnect the phone from the computer. Wait for about 2 mins (idk if it is necessary) then hold POWER to start the phone. Then wait for a long boot ("NOKIA" logo).
Now you have unbricked you phone. Enjoy
Click to expand...
Click to collapse
please can i use this on my nokia 3 mtk 6737 ?